RESUMEN
The portable Raman spectrometer boasts portability, rapid analysis, and high flexibility. It stands as a crucial and powerful technical tool for analyzing the chemical composition of samples, whether biological or non-biological, across diverse fields. To improve the resolution of grating spectrometers and ensure a wide spectral range, many spectrometer systems have been designed with double-grating structures. However, the impact of external forces, such as installation deviations and inevitable collisions, may cause differences between the actual state of the internal spectrometer components and their theoretical values. Therefore, spectrometers must be calibrated to establish the relationship between the wavelength and the pixel positions. The characteristic peaks of commonly used calibration substances are primarily distributed in the 200-2000 cm-1 range. The distribution of characteristic peaks in other wavenumber ranges is sparse, especially for spectrometers with double-channel spectral structures and wide spectral ranges. This uneven distribution of spectral peaks generates significant errors in the polynomial fitting results used to calibrate spectrometers. Therefore, to satisfy the calibration requirements of a dual-channel portable Raman spectrometer with a wide spectral range, this study designed a calibration method based on an optical frequency comb, which generates dense and uniform comb-like spectral signals at equal intervals. The method was verified experimentally and compared to the traditional calibration method of using a mercury-argon lamp. The results showed that the error bandwidth of the calibration results of the proposed method was significantly smaller than that of the mercury-argon lamp method, thus demonstrating a substantial improvement in the calibration accuracy.
RESUMEN
Consensus algorithms are the core technology of a blockchain and directly affect the implementation and application of blockchain systems. Delegated proof of stake (DPoS) significantly reduces the time required for transaction verification by selecting representative nodes to generate blocks, and it has become a mainstream consensus algorithm. However, existing DPoS algorithms have issues such as "one ballot, one vote", a low degree of decentralization, and nodes performing malicious actions. To address these problems, an improved DPoS algorithm based on community discovery is designed, called CD-DPoS. First, we introduce the PageRank algorithm to improve the voting mechanism, achieving "one ballot, multiple votes", and we obtain the reputation value of each node. Second, we propose a node voting enthusiasm measurement method based on the GN algorithm. Finally, we design a comprehensive election mechanism combining node reputation values and voting enthusiasm to select secure and reliable accounting nodes. A node credit incentive mechanism is also designed to effectively motivate normal nodes and drive out malicious nodes. The experimental simulation results show that our proposed algorithm has better decentralization, malicious node eviction capabilities and higher throughput than similar methods.
RESUMEN
The referenced article [Appl. Opt.56, 9325 (2017)APOPAI0003-693510.1364/AO.56.009325] has been retracted by the authors.
Asunto(s)
Fibras Ópticas , Piel , AnimalesRESUMEN
BACKGROUND: Chronic kidney disease (CKD) is a significant public health concern. In patients with CKD, interventions that support disease self-management have shown to improve health status and quality of life. At the moment, the use of electronic health (eHealth) technology in self-management interventions is becoming more and more popular. Evidence suggests that eHealth-based self-management interventions can improve health-related outcomes of patients with CKD. However, knowledge of the implementation and effectiveness of such interventions in general, and in China in specific, is still limited. This study protocol aims to develop and tailor the evidence-based Dutch 'Medical Dashboard' eHealth self-management intervention for patients suffering from CKD in China and evaluate its implementation process and effectiveness. METHODS: To develop and tailor a Medical Dashboard intervention for the Chinese context, we will use an Intervention Mapping (IM) approach. A literature review and mixed-method study will first be conducted to examine the needs, beliefs, perceptions of patients with CKD and care providers towards disease (self-management) and eHealth (self-management) interventions (IM step 1). Based on the results of step 1, we will specify outcomes, performance objectives, and determinants, select theory-based methods and practical strategies. Knowledge obtained from prior results and insights from stakeholders will be combined to tailor the core interventions components of the 'Medical Dashboard' self-management intervention to the Chinese context (IM step 2-5). Then, an intervention and implementation plan will be developed. Finally, a 9-month hybrid type 2 trial design will be employed to investigate the effectiveness of the intervention using a cluster randomized controlled trial with two parallel arms, and the implementation integrity (fidelity) and determinants of implementation (IM step 6). DISCUSSION: Our study will result in the delivery of a culturally tailored, standardized eHealth self-management intervention for patients with CKD in China, which has the potential to optimize patients' self-management skills and improve health status and quality of life. Moreover, it will inform future research on the tailoring and translation of evidence-based eHealth self-management interventions in various contexts. TRIAL REGISTRATION: Clinicaltrials.gov NCT04212923 ; Registered December 30, 2019.
Asunto(s)
Insuficiencia Renal Crónica/terapia , Automanejo , Telemedicina , Interfaz Usuario-Computador , China , Presentación de Datos , Humanos , Proyectos de Investigación , Automanejo/métodosRESUMEN
An Ag-graphene layers-coated H-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor with a U-shaped grooves open structure for refractive index (RI) sensing is proposed and numerically simulated by the finite element method (FEM). The designed sensor could solve the problems of air-holes material coating and analyte filling in PCF. Two big air-holes in the x-axis produce a birefringence phenomenon leading to the confinement loss and sensitivity of x-polarized light being much stronger than y-polarized. Graphene is deposited on the layer of silver in the grooves; its high surface to volume ratio and rich π conjugation make it a suitable dielectric layer for sensing. The effect of structure parameters such as air-holes size, U-shaped grooves depth, thickness of the silver layer and number of graphene layers on the sensing performance of the proposed sensor are numerical simulated. A large analyte RI range from 1.33 to 1.41 is calculated and the highest wavelength sensitivity is 12,600 nm/RIU. In the linear RI sensing region of 1.33 to 1.36; the average wavelength sensitivity we obtained can reach 2770 nm/RIU with a resolution of 3.61 × 10-5 RIU. This work provides a reference for developing a high-sensitivity; multi-parameter measurement sensor potentially useful for water pollution monitoring and biosensing in the future.
RESUMEN
Heat shock proteins 70 (Hsp70) constitute a highly conserved protein family of cellular chaperones widely distributed in plants, where they play a fundamental role in response to biotic and abiotic stress. Until now, genome-wide analyses of the Hsp70 gene family have been conducted for some species. However, reports about Hsp70 genes in Nicotiana tabacum are scarce. In this study, we systematically conducted genome-wide identification and expression analysis of the Hsp70 gene family in tobacco, including gene structure, classification, evolutionary relationships, promoters, and transcript levels in response to abiotic stress treatments. In all, 61 Hsp70 members were identified and classified into six groups that were mapped onto 18 chromosomes, where most were distributed on both ends of the chromosome. The conserved structures and motifs of NtHsp70 proteins in the same subfamily were highly consistent. At least 15 pairs of NtHsp70 genes underwent gene duplication by segment and tandem duplications. Most NtHsp70 proteins contained N-terminal hexokinase conserved motifs. Phylogenetic analysis showed that most species expanded according to their own species-specific approach during the evolution of Hsp70s. Tissue-specific expression analysis indicated that all NtHsp70 genes were involved in at least one or more abiotic stress responses, highlighting the wide participation of NtHsp70 genes in environmental adaptation. This is the first genome-wide analysis of Hsp70 in N. tabacum. These results indicate that each NtHsp70 member fulfilled distinct functions in response to various abiotic stresses.
Asunto(s)
Proteínas HSP70 de Choque Térmico/genética , Proteínas HSP70 de Choque Térmico/metabolismo , Nicotiana/genética , Evolución Molecular , Duplicación de Gen/genética , Perfilación de la Expresión Génica/métodos , Regulación de la Expresión Génica de las Plantas/genética , Estudio de Asociación del Genoma Completo , Proteínas HSP70 de Choque Térmico/clasificación , Chaperonas Moleculares/genética , Familia de Multigenes , Filogenia , Proteínas de Plantas/genética , Estrés Fisiológico/genética , Nicotiana/metabolismoRESUMEN
To meet the application requirements of curvature measurement for soft biomedical robotics and flexible morphing wings of aircraft, the optical fiber Bragg grating (FBG) shape sensor for soft robots and flexible morphing wing was implemented. This optical FBG is embedded in polyimide film and then fixed in the body of a soft robot and morphing wing. However, a lack of analysis on the embedded depth of FBG sensors in polyimide film and its sensitivity greatly limits their application potential. Herein, the relationship between the embedded depth of the FBG sensor in polyimide film and its sensitivity and stability are investigated. The sensing principle and structural design of the FBG sensor embedded in polyimide film are introduced; the bending curvatures of the FBG sensor and its wavelength shift in polyimide film are studied; and the relationship between the sensitivity, stability, and embedded depth of these sensors are verified experimentally. The results showed that wavelength shift and curvature have a linear relationship. With the sensor's curvature ranging from 0 m-1 to 30 m-1, their maximum sensitivity is 50.65 pm/m-1, and their minimum sensitivity is 1.96 pm/m-1. The designed FBG sensor embedded in polyimide films shows good consistency in repeated experiments for soft actuator and morphing wing measurement; the FBG sensing method therefore has potential for real applications in shape monitoring in the fields of soft robotics and the flexible morphing wings of aircraft.
Asunto(s)
Técnicas Biosensibles/métodos , Tecnología de Fibra Óptica/métodos , Imidas/química , Robótica/métodos , Fibras ÓpticasRESUMEN
An extended robotâ»world and handâ»eye calibration method is proposed in this paper to evaluate the transformation relationship between the camera and robot device. This approach could be performed for mobile or medical robotics applications, where precise, expensive, or unsterile calibration objects, or enough movement space, cannot be made available at the work site. Firstly, a mathematical model is established to formulate the robot-gripper-to-camera rigid transformation and robot-base-to-world rigid transformation using the Kronecker product. Subsequently, a sparse bundle adjustment is introduced for the optimization of robotâ»world and handâ»eye calibration, as well as reconstruction results. Finally, a validation experiment including two kinds of real data sets is designed to demonstrate the effectiveness and accuracy of the proposed approach. The translation relative error of rigid transformation is less than 8/10,000 by a Denso robot in a movement range of 1.3 m × 1.3 m × 1.2 m. The distance measurement mean error after three-dimensional reconstruction is 0.13 mm.
RESUMEN
The measurement of fluorescence lifetimes emerged in flow cytometry because it is not impacted by the non-linearity, which occurs in fluorescence intensity measurements. However, this significantly increases the cost and complexity of a traditional flow cytometer. This work reports a simple method of fluorescence lifetime measurement of a flow cytometer based on the cytometric fluorescence pulse time-delay estimation and hardware time-delay calibration. The modified chirp Z-transform (MCZT) algorithm, combined with the algorithm of fine interpolation of correlation peak (FICP), is applied to improve the temporal resolution of the cross-correlation function of the scattering and fluorescence signals, which in turn improves the time-delay estimation accuracy. The estimation accuracy is verified by Gauss fitting. Cells that were labeled simultaneously with three-color reagents are measured; the statistical results of 5000 cells are compared with reference values and are verified with the pulse width variation. The results show the potential of fluorescence lifetime measurements in the traditional flow cytometer.
RESUMEN
A preloaded rotational sensor featuring a spring packaged within the magnetic head has been proposed and experimentally demonstrated. The aforementioned fiber Bragg grating-based system can convert the strain information into rotation angles without rotation angle limitations in terms of the proposed angle transfer mathematical model. The random-angular displacements were well fitted by the model with the maximum deviation of 0.5°. The linearity of the calculated rotational velocity reaches up to 0.998 in the range of 0 to 2021.4 rpm. This sensor can also be applied in the angular acceleration measurement.
RESUMEN
This paper presents the 3D shape sensing of polyimide thin film skin for a flexible morphing wing using fiber Bragg grating (FBG) sensors. The calibration curves of the FBG sensors are measured experimentally to ensure relative accurate conversion between Bragg wavelength shift (BWS) and bending curvature of the polyimide skin. The reflection spectra of the FBG sensors are measured at different airfoil profiles, and the variation tendency of the BWS values with the airfoil profiles are analyzed. The bending curvatures of the polyimide thin film skin at different airfoil profiles are calculated using the measured BWS values of the FBG sensors and the linear interpolation algorithm. The 3D shapes of the polyimide skin at different airfoil profiles are reconstructed based on the measured bending curvatures and the interpolation and curve fitting functions. The 3D precise visual measurements are conducted using a digital photogrammetry system, and then the correctness of the shape reconstruction results are verified. The results prove that the maximum error between the 3D visual and FBG measurements is less than 5%. The FBG sensing method is effective for the shape sensing of polyimide skin for flexible morphing wing.
RESUMEN
Precision in flow cytometry depends on many factors, the first of which is accurate and stable positioning of the hydrodynamically focused cells. However, no method exists to evaluate the stability of laminar flow and single-cell flow in the flow chamber of the flow cytometer directly because of the small size of the rectangular channel of the flow chamber. In this paper, a method of high-speed particle image velocimetry is proposed to solve this problem. The velocity stability of the particles in the flow chamber is used to evaluate the flow stability of the fluid path of the flow cytometer. The side scattering images of particles are obtained by a high-speed camera. Upon exposure, cells were imaged at random positions in the flow cell, resulting in four different types of the images: blank, inadequate, normal, or overlapped. Normal images were identified utilizing a grey cluster analysis algorithm based on trapezoid whitenization weight functions. A mid-point method is applied to determine the length of the particle track at a fixed exposure time. The variation of the trajectory lengths of the normal images are used to evaluate the stability of the liquid path. Experiments are carried out to verify the feasibility of our method in which different diameter microspheres at different flow rates. The results indicate that the standard deviation and relative standard deviation of the trajectory lengths can be used as the evaluation indices of the liquid path stability of the flow cytometer. © 2016 International Society for Advancement of Cytometry.
Asunto(s)
Citometría de Flujo/métodos , Hidrodinámica , Microesferas , Reología/métodosRESUMEN
Flow cytometry is being applied more extensively because of the outstanding advantages of multicolor fluorescence analysis. However, the intensity measurement is susceptible to the nonlinearity of the detection method. Moreover, in multicolor analysis, it is impossible to discriminate between fluorophores that spectrally overlap; this influences the accuracy of the fluorescence pulse signal representation. Here, we focus on spectral overlap in two-color analysis, and assume that the fluorescence follows the single exponential decay model. We overcome these problems by analyzing the influence of the spectral overlap quantitatively, which enables us to propose a method of fluorescence pulse signal representation based on time-delay estimation (between fluorescence and scattered pulse signals). First, the time delays are estimated using a modified chirp Z-transform (MCZT) algorithm and a fine interpolation of the correlation peak (FICP) algorithm. Second, the influence of hardware is removed via calibration, in order to acquire the original fluorescence lifetimes. Finally, modulated signals containing phase shifts associated with these lifetimes are created artificially, using a digital signal processing method, and reference signals are introduced in order to eliminate the influence of spectral overlap. Time-delay estimation simulation and fluorescence signal representation experiments are conducted on fluorescently labeled cells. With taking the potentially overlap of autofluorescence as part of the observed fluorescence spectrum, rather than distinguishing the individual influence, the results show that the calculated lifetimes with spectral overlap can be rectified from 8.28 and 4.86 ns to 8.51 and 4.63 ns, respectively, using the comprehensive approach presented in this work. These values agree well with the lifetimes (8.48 and 4.67 ns) acquired for cells stained with single-color fluorochrome. Further, these results indicate that the influence of spectral overlap can be eliminated effectively. Moreover, modulation, mixing with reference signals, and low-pass filtering are performed with a digital signal processing method, thereby obviating the need for a high-speed analog device and complex circuit system. Finally, the flexibility of the comprehensive method presented in this work is significantly higher than that of existing methods.
Asunto(s)
Citometría de Flujo/métodos , Algoritmos , Fluorescencia , Procesamiento de Señales Asistido por ComputadorRESUMEN
One of the essential factors influencing the prediction accuracy of multivariate calibration models is the quality of the calibration data. A local regression strategy, together with a wavelength selection approach, is proposed to build the multivariate calibration models based on partial least squares regression. The local algorithm is applied to create a calibration set of spectra similar to the spectrum of an unknown sample; the synthetic degree of grey relation coefficient is used to evaluate the similarity. A wavelength selection method based on simple-to-use interactive self-modeling mixture analysis minimizes the influence of noisy variables, and the most informative variables of the most similar samples are selected to build the multivariate calibration model based on partial least squares regression. To validate the performance of the proposed method, ultraviolet-visible absorbance spectra of mixed solutions of food coloring analytes in a concentration range of 20-200 µg/mL is measured. Experimental results show that the proposed method can not only enhance the prediction accuracy of the calibration model, but also greatly reduce its complexity.
RESUMEN
PURPOSE: Volume-controlled ventilation (VCV) has been the traditional mechanical ventilation mode in laparoscopic surgery. Pressure-controlled ventilation (PCV) has been used more frequently in recent years, especially for patients with complicated conditions; however, evidence on whether PCV is superior to VCV is still lacking. A meta-analysis was used to compare the effects of PCV and VCV on respiratory and hemodynamic parameters during laparoscopic surgery. METHODS: PubMed and Embase were each searched from their inception to December 2014 for randomized controlled trials comparing the effects of PCV and VCV on respiratory and hemodynamic parameters during laparoscopic surgery. Standard mean difference (SMD) with 95% confidence interval (CI) was calculated using a random effect model. Outcomes were assessed at three times: preoperative (T1), intraoperative (T2) and postoperative (T3). Respiratory mechanics (including peak airway pressure, plateau pressure, mean airway pressure, compliance, airway resistance, minute volume, end-tidal CO2 tension and tidal volume) and hemodynamic parameters (including heart rate and mean arterial pressure) were calculated. RESULTS: Eight randomized controlled trials with a total of 428 participants, 214 cases using PCV and 214 cases using VCV, were included in the meta-analysis. No significant differences were detected between the groups in terms of hemodynamic parameters. In contrast, with respiratory mechanics, PCV was slightly but significantly associated with lower peak airway pressure, higher compliance, lower airway resistance at T1, lower peak airway pressure, higher compliance, higher mean airway pressure at T2, lower peak airway pressure, lower mean airway pressure and higher end-tidal CO2 tension at T3. For the rest of respiratory parameters, there were no statistical differences between the groups. Subgroup analysis by morbidly obese, type of operations and quality of studies, showed similar results. CONCLUSIONS: Our meta-analysis suggests that hemodynamic parameters are similar in patients who underwent laparoscopic surgery with PCV and VCV, but patients who had PCV exhibited mildly better respiratory data.
Asunto(s)
Laparoscopía/métodos , Respiración Artificial/métodos , Hemodinámica , Humanos , Ensayos Clínicos Controlados Aleatorios como Asunto , Fenómenos Fisiológicos RespiratoriosRESUMEN
BACKGROUND/AIMS: Acute fatty liver of pregnancy (AFLP) is a severe liver failure condition that has limited therapeutic approaches. We aimed to evaluate the efficacy of combining plasma exchange (PE) and plasma perfusion (PP) with conventional therapy for the treatment of AFLP using a retrospective analysis. METHODS: Among 22 patients with AFLP, 16 cases were treated with conventional treatment (CT group), while the other 6 cases were treated with PE and PP in addition to conventional therapy (CT+PE+PP group). Treatment efficacy was based primarily on survival and secondarily on liver and kidney functions 2 weeks after treatment. Adverse effects were also assessed at the same time point. RESULTS: In the CT+PE+PP group, 5 (83.3%) patients improved, while 1 (16.7%) patient died of multiple organ dysfunction syndrome. In the CT group, 3 (18.75%) patients improved, while 13 (81.2%) patients died of complications. Liver and kidney functions and survival were significantly improved in the CT+PE+PP group (p < 0.05) compared to the CT group. CONCLUSIONS: Timely application of PE and PP in the early phase of AFLP may be a promising treatment to halt or reverse the progression of AFLP.
Asunto(s)
Hígado Graso/terapia , Hemoperfusión/métodos , Intercambio Plasmático/métodos , Complicaciones del Embarazo/terapia , Adulto , Terapia Combinada , Femenino , Humanos , Embarazo , Estudios Retrospectivos , Resultado del Tratamiento , Adulto JovenRESUMEN
Hamiltonian learning, as an important quantum machine learning technique, provides a significant approach for determining an accurate quantum system. This paper establishes parameterized Hamiltonian learning (PHL) and explores its application and implementation on quantum computers. A parameterized quantum circuit for Hamiltonian learning is first created by decomposing unitary operators to excite the system evolution. Then, a PHL algorithm is developed to prepare a specific Hamiltonian system by iteratively updating the gradient of the loss function about circuit parameters. Finally, the experiments are conducted on Origin Pilot, and it demonstrates that the PHL algorithm can deal with the image segmentation problem and provide a segmentation solution accurately. Compared with the classical Grabcut algorithm, the PHL algorithm eliminates the requirement of early manual intervention. It provides a new possibility for solving practical application problems with quantum devices, which also assists in solving increasingly complicated problems and supports a much wider range of application possibilities in the future.
RESUMEN
Background: Humanistic care pertains to the abilities, attitudes, and behaviors central to patient-centered care, contributing to patients' sense of safety and wellbeing. This study aimed to assess the satisfaction of patients with humanistic nursing care in Chinese secondary and tertiary public hospitals. Methods: A national cross-sectional survey was conducted across 30 provinces and 83 hospitals in China. Patient satisfaction with humanistic care was assessed using the Methodist Health Care System Nurse Caring Instrument (NCI), which encompasses 20 items across 12 dimensions. Each item was rated on a 7-point Likert scale, yielding a total score of 140. Multiple linear regression analysis was employed to identify factors associated with patients' satisfaction. Results: Moderate satisfaction (mean score 91.26 ± 13.14) with humanistic nursing care was observed among the 17,593 participants. Factors significantly associated with patient satisfaction included age, hospital type, presence of children, educational attainment, place of residence, family monthly income, and medical insurance type. Conclusion: The study findings highlight the importance of tailored interventions, evidence-based practice guidelines, and patient-centered care in improving patients' satisfaction with humanistic nursing care. Continuous emphasis on nursing education and professional development is crucial for enhancing humanistic care and patient satisfaction.
Asunto(s)
Pueblos del Este de Asia , Satisfacción del Paciente , Humanos , Pueblo Asiatico , Estudios Transversales , Hospitales PúblicosRESUMEN
BACKGROUND: A growing body of evidence supports the potential effectiveness of electronic health (eHealth) self-management interventions in improving disease self-management skills and health outcomes of patients suffering from chronic kidney disease (CKD). However, current research on CKD eHealth self-management interventions has almost exclusively focused on high-income, western countries. OBJECTIVE: To inform the adaptation of a tailored eHealth self-management intervention for patients with CKD in China based on the Dutch Medical Dashboard (MD) intervention, we examined the perceptions, attitudes and needs of Chinese patients with CKD and health care professionals (HCPs) towards eHealth based (self-management) interventions in general and the Dutch MD intervention in specific. METHODS: We conducted a basic interpretive, cross-sectional qualitative study comprising semi-structured interviews with 11 patients with CKD and 10 HCPs, and 2 focus group discussions with 9 patients with CKD. This study was conducted in the First Affiliated Hospital of Zhengzhou University in China. Data collection continued until data saturation was reached. All data were transcribed verbatim and analyzed using a framework approach. RESULTS: Three themes emerged: (1) experience with eHealth in CKD (self-management), (2) needs for supporting CKD self-management with the use of eHealth, and (3) adaptation and implementation of the Dutch MD intervention in China. Both patients and HCPs had experience with and solely mentioned eHealth to 'inform, monitor and track' as potentially relevant interventions to support CKD self-management, not those to support 'interaction' and 'data utilization'. Factors reported to influence the implementation of CKD eHealth self-management interventions included information barriers (i.e. quality and consistency of the disease-related information obtained via eHealth), perceived trustworthiness and safety of eHealth sources, clinical compatibility and complexity of eHealth, time constraints and eHealth literacy. Moreover, patients and HCPs expressed that eHealth interventions should support CKD self-management by improving the access to reliable and relevant disease related knowledge and optimizing the timeliness and quality of patient and HCPs interactions. Finally, suggestions to adaptation and implementation of the Dutch MD intervention in China were mainly related to improving the intervention functionalities and content of MD such as addressing the complexity of the platform and compatibility with HCPs' workflows. CONCLUSIONS: The identified perceptions, attitudes and needs towards eHealth self-management interventions in Chinese settings should be considered by researchers and intervention developers to adapt a tailored eHealth self-management intervention for patients with CKD in China. In more detail, future research needs to engage in co-creation processes with vulnerable groups during eHealth development and implementation, increase eHealth literacy and credibility of eHealth (information resource), ensure eHealth to be easy to use and well-integrated into HCPs' workflows.
Asunto(s)
Insuficiencia Renal Crónica , Telemedicina , China , Estudios Transversales , Personal de Salud , Humanos , Investigación Cualitativa , Insuficiencia Renal Crónica/terapiaRESUMEN
OBJECTIVES: To support the adaptation and translation of an evidence-based chronic kidney disease (CKD) self-management intervention to the Chinese context, we examined the beliefs, perceptions and needs of Chinese patients with CKD and healthcare professionals (HCPs) towards CKD self-management. DESIGN: A basic interpretive, cross-sectional qualitative study comprising semistructured interviews and observations. SETTING: One major tertiary referral hospital in Henan province, China. PARTICIPANTS: 11 adults with a diagnosis of CKD with CKD stages G1-G5 and 10 HCPs who worked in the Department of Nephrology. RESULTS: Four themes emerged: (1) CKD illness perceptions, (2) understanding of and motivation towards CKD self-management, (3) current CKD practice and (4) barriers, (anticipated) facilitators and needs towards CKD self-management. Most patients and HCPs solely mentioned medical management of CKD, and self-management was largely unknown or misinterpreted as adherence to medical treatment. Also, the majority of patients only mentioned performing disease-specific acts of control and not, for instance, behaviour for coping with emotional problems. A paternalistic patient-HCP relationship was often present. Finally, the barriers, facilitators and needs towards CKD self-management were frequently related to knowledge and environmental context and resources. CONCLUSIONS: The limited understanding of CKD self-management, as observed, underlines the need for educational efforts on the use and benefits of self-management before intervention implementation. Also, specific characteristics and needs within the Chinese context need to guide the development or tailoring of CKD self-management interventions. Emphasis should be placed on role management and emotional coping skills, while self-management components should be tailored by addressing the existing paternalistic patient-HCP relationship. The use of electronic health innovations can be an essential facilitator for implementation.