Multi-layer 3D Chirality and Double-Helical Assembly in a Copper Nanocluster with a Triple-Helical Cu15 Core.

Conceptually mimicking biomolecules' ability to construct multiple-helical aggregates with emergent properties and functions remains a long-standing challenge. Here we report an atom-precise 18-copper nanocluster (NC), Cu18 H(PET)14 (TPP)6 (NCS)3 (Cu18 H) which contains a pseudo D3 -symmetrical triple-helical Cu15 core. Structurally, Cu18 H may be also viewed as sandwich type of sulfur-bridged chiral copper cluster units [Cu6 -Cu6 -Cu6 ], endowing three-layered 3D chirality. More importantly, the chiral NCs are aggregated into an infinite double-stranded helix supported by intra-strand homonuclear C-H⋅⋅⋅H-C dihydrogen contacts and inter-strand C-H/π and C-H/S interactions. The unique multi-layered 3D chirality and the double-helical assembly of Cu18 H are evocative of DNA. Moreover, the collective behaviours of the aggregated NCs not only exhibit crystallization-induced emission enhancement (CIEE) and aggregation-induced emission enhancement (AIEE) effects in the deep-red region, but also efficiently catalyze electron transfer (ET) reaction. This study thus presents that hierarchical assemblies of atomically defined copper NCs could be intricate as observed for important biomolecules like DNA with emergent properties arising from aggregated behaviours.

Total Structure, Electronic Structure and Catalytic Hydrogenation Activity of Metal-Deficient Chiral Polyhydride Cu57 Nanoclusters.

Accurate identifying and in-depth understanding of the defect sites in a working nanomaterial could hinge on establishing specific defect-activity relationships. Yet, atomically precise coinage-metal nanoclusters (NCs) possessing surface vacancy defects are scarce primarily owing to challenges in the synthesis and isolation of such defective NCs. Herein we report a mixed-ligand strategy to synthesizing an intrinsically chiral and metal-deficient copper hydride-rich NC [Cu57 H20 (PET)36 (TPP)4 ]+ (Cu57 H20 ). Its total structure (including hydrides) and electronic structure are well established by combined experimental and computational results. Crystal structure reveals Cu57 H20 features a cube-like Cu8 kernel embedded in a corner-missing metal-ligand shell of Cu49 (PET)36 (TPP)4 . Single Cu vacancy defect site occurs at one corner of the shell, evocative of mono-lacunary polyoxometalates. Theoretical calculations demonstrate that the above-mentioned point vacancy causes one surface hydride exposed as an interfacial capping µ3 -H- , which is accessible in chemical reaction, as proved by deuterated experiment. Moreover, Cu57 H20 shows catalytic activity in the hydrogenation of nitroarene. The success of this work opens the way for the research on well-defined chiral metal-deficient Cu and other metal NCs, including exploring their application in asymmetrical catalysis.

Unusual Intramolecular Motion of ReH92- in K2ReH9 Crystal: Circle Dance and Three-Arm Turnstile Mechanisms Revealed by Computational Studies.

The nonahydridorhenate dianion ReH92- is a unique rhenium polyhydride complex due to its remarkably high coordination number; however, its detailed polytopal rearrangement process in either solution or crystal is so far unclear. In this work, our quantum chemical calculations have identified two previously unreported fluxional mechanisms for the ReH92- dianion in the K2ReH9 crystal: three-arm turnstile rotation and circle dance mechanism. These two polytopal rearrangements in the crystal offer an alternative interpretation to the pulse and wide-line NMR spectra (Farrar et al. J. Chem. Phys. 1969, 51, 3595). The previously postulated hindered rotation of the whole ReH92- dianion in K2ReH9 (White et al. J. Chem. Soc., Faraday Trans. 2 1972, 68, 1414) turns out to be a combination of the above-mentioned two elementary fluxional processes. In addition, our calculations have confirmed the Muetterties' D3h⇌C4v rearrangement as the intramolecular motion for the ReH92- dianion in solution.

Describing Polytopal Rearrangement Processes of Octacoordinate Structures. I. Renewed Insights into Fluxionality of the Rhenium Polyhydride Complex ReH5(PPh3)2(Pyridine).

Hydride ligands of transition metal polyhydride complexes with a high coordination number are prone to fluxionality leading to interesting structural dynamics. However, the underlying polytopal rearrangement pathways have been rarely studied. Based on quantum chemical calculations carried out in this work with density functional theory and coupled-cluster theory, two new fluxional mechanisms have been identified for the rhenium polyhydride complex ReH5(PPh3)2(pyridine) to jointly account for two consecutive coalescence events in the variable-temperature NMR spectra upon heating: lateral and basal three-arm turnstile rotation. The frequently cited pseudorotation in ReH5(PPh3)2(pyridine) (Lee et al. Inorg. Chem. 1996, 35, 695) turns out to be a three-step process including two lateral three-arm turnstile steps and one basal turnstile step in between. The new fluxional mechanisms discovered in this work may also exist in other transition metal polyhydrides.

Recent Progress in Inorganic Anions Templated Silver Nanoclusters: Synthesis, Structures and Properties.

Over recent years, research on the ligand-protected silver clusters have gained significant interest owing to their unique potential applications in catalysis, organic optoelectronics, and luminescent materials. However, the synthesis of structurally precise high-nuclearity silver nanoclusters is still challenging and become one of the prime interests of chemists. The controllable synthesis of high-nuclearity silver nanoclusters involves the ingenious use of capping ligands or/and templating agents. Thereinto, the main role of the templating agents is to promote the order arrangement of silver ions around them to form discrete molecules. Our lab has performed comprehensive studies on the ligand-protected silver clusters in the past eight years. This review highlights recent progress in the use of inorganic template anions, silver precursors, solvents, and the ligand types in synthesizing high-nuclearity silver nanoclusters. Furthermore, some interesting photo- and electrochemical properties revealed by silver clusters including luminescent thermochromism, electrical conductivity, and electrochemical reduction of H2 O2 have been also summarized.

A Sodalite-Type Silver Orthophosphate Cluster in a Globular Silver Nanocluster.

The synthesis and structure of a giant 102-silver-atom nanocluster (NC) 1 is presented. X-ray structural analysis reveals that 1 features a multi-shelled metallic core of Ag6 @Ag24 @Ag60 @Ag12 . An octahedral Ag6 core is encaged by a truncated octahedral Ag24 shell. The Ag24 shell is composed of a hitherto unknown sodalite-type silver orthophosphate cluster (SOC) {(Ag3 PO4 )8 }, reminiscent of the Ag3 PO4 photocatalyst. The SOC is capped by six interstitial sulfur atoms, giving a unique anionic cluster [Ag6 @{(Ag3 PO4 )8 }S6 ]6- , which functions as an intricate polyhedral template with abundant surface O and S atoms guiding the formation of a rare rhombicosidodecahedral Ag60 shell. An array of 6 linear Ag2 staples further surround this Ag60 shell. [Ag6 @{(Ag3 PO4 )8 }S6 ]6- is an unusual Ag-based templating anion to induce the assembly of a SOC within silver NC. This finding provides molecular models for bulk Ag3 PO4 , and offers a fresh template strategy for the synthesis of silver NCs with high symmetry.

The Difference Se Makes: A Bio-Inspired Dppf-Supported Nickel Selenolate Complex Boosts Dihydrogen Evolution with High Oxygen Tolerance.

Inspired by the metal active sites of [NiFeSe]-hydrogenases, a dppf-supported nickel(II) selenolate complex (dppf=1,1'-bis(diphenylphosphino)ferrocene) shows high catalytic activity for electrochemical proton reduction with a remarkable enzyme-like H2 evolution turnover frequency (TOF) of 7838 s-1 under an Ar atmosphere, which markedly surpasses the activity of a dppf-supported nickel(II) thiolate analogue with a low TOF of 600 s-1 . A combined study of electrochemical experiments and DFT calculations shed light on the catalytic process, suggesting that selenium atom as a bio-inspired proton relay plays a key role in proton exchange and enhancing catalytic activity of H2 production. For the first time, this type of Ni selenolate-containing electrocatalyst displays a high degree of O2 and H2 tolerance. Our results should encourage the development of the design of highly efficient oxygen-tolerant Ni selenolate molecular catalysts.

Counter electrodes in dye-sensitized solar cells.

Dye-sensitized solar cells (DSSCs) are regarded as prospective solar cells for the next generation of photovoltaic technologies and have become research hotspots in the PV field. The counter electrode, as a crucial component of DSSCs, collects electrons from the external circuit and catalyzes the redox reduction in the electrolyte, which has a significant influence on the photovoltaic performance, long-term stability and cost of the devices. Solar cells, dye-sensitized solar cells, as well as the structure, principle, preparation and characterization of counter electrodes are mentioned in the introduction section. The next six sections discuss the counter electrodes based on transparency and flexibility, metals and alloys, carbon materials, conductive polymers, transition metal compounds, and hybrids, respectively. The special features and performance, advantages and disadvantages, preparation, characterization, mechanisms, important events and development histories of various counter electrodes are presented. In the eighth section, the development of counter electrodes is summarized with an outlook. This article panoramically reviews the counter electrodes in DSSCs, which is of great significance for enhancing the development levels of DSSCs and other photoelectrochemical devices.

Silver-Sulfur Hybrid Supertetrahedral Clusters: The Hitherto Missing Members in the Metal-Chalcogenide Tetrahedral Clusters.

The synthesis of Group 11 metal chalcogenide supertetrahedral clusters (SCs) still remains a great challenge mainly due to the high tendency of metal aggregation through metallophilicity and global charge balance. Demonstrated herein are the preparation, crystallographic characterization, and optical properties of two stable silver-sulfur SCs through ligand-control; one as a discrete zero-dimensional (0D) V3,4-type cluster and the other as a one-dimensional (1D) zigzag chain extended by alternating V3,2-type clusters. The notation Vn,m (where n is the number of metal layers, and m is the number of vacant corners) is used to describe a new series of vacant-corner SCs, which can be derived from the regular Tn clusters. The existence of vacant-corner-type SCs may be ascribed to the low valence and tri-coordinated environment of silver ions. These are the first representatives of structurally determined silver-sulfur tetrahedral clusters thus far. This work enriches the coinage-metal chalcogenide tetrahedral cluster portfolio, discovers vacant-corner SCs present in silver-sulfur hybrid tetrahedral clusters, and provides effective means for further development of Group 11 coinage-metal chalcogenide SCs.

The relationship between the boron dipyrromethene (BODIPY) structure and the effectiveness of homogeneous and heterogeneous solar hydrogen-generating systems as well as DSSCs.

A series of boron dipyrromethene (BODIPY) dyes (B1­B5) having H atoms at 2,6-positions or heavy-atom I at 2-/2,6-positions, and an ortho- or a para-COOH substituted phenyl moiety at the 8-position on the BODIPY core were synthesized and characterized. These organic dyes were applied for investigating the relationship between the BODIPY structure and the effectiveness of homogeneous and heterogeneous visible-light-driven hydrogen production as well as dye-sensitized solar cells (DSSCs). For the homogeneous photocatalytic hydrogen production systems with a cobaloxime catalyst, the efficiency of hydrogen production could be tuned by substituting with heavy atoms and varying carboxyl group orientations of BODIPYs. As a result, B5 containing two I atoms and an ortho-COOH anchoring group was the most active one (TONs = 197). The activity of hydrogen generation followed the order B5 > B3 > B2 > B1 = B4 = 0. An interesting "ortho-position effect" was observed in the present homogeneous systems, i.e., substitution groups were located at the ortho-position and higher hydrogen production activities were obtained. For the heterogeneous hydrogen production systems with a platinized TiO2 catalyst, the effectiveness of hydrogen evolution was highly influenced by the intersystem crossing efficiency, molar absorptivity and positions of the anchoring group of dyes. Thus, B3 having two core iodine atoms and a para-COOH group with TONs of 70 excelled other BODIPYs and the TONs of hydrogen generation showed the trend of B3 > B5 > B2 > B1 = B4 = 0. The results demonstrate that the present photocatalytic H2 production proceeds with higher efficiency and stability in the homogeneity than in the heterogeneity. In the case of DSSCs, the overall cell performance of BODIPY chromophores was highly dependent on both the absence or the presence of iodine atoms on the BODIPY core and ­COOH anchoring positions. The B1­TiO2 system showed the best cell performance, because the most effective surface binding mode is allowed with this structure. This is also in contrast with the case of dye-sensitized solar H2 generation, in which B3 was the most efficient chromophore. The differences between dye-sensitized hydrogen-generating systems and DSSCs may be due to rates of electron transfer and the dye aggregation tendency.