RESUMEN
OBJECTIVE: To show the benefit of a minor orthodontic pretreatment prior to fixed restorations in the esthetic zone in challenging situations. OVERVIEW: Esthetic rehabilitations in complex situations need careful treatment planning and comprehensive interdisciplinary approach. Minor orthodontic pretreatments may transfer complex situations into straight forward situations. Typical indications are space opening in order to provide space for a restoration with anatomic proportion or corrections of the tooth axis. CONCLUSION: This article presents three clinical cases that show how decision making can be facilitated by a functional and esthetic wax-up/mock-up workflow and how orthodontic pretreatment can contribute to a more functional, less invasive, and more esthetic outcome of restorative treatments in the esthetic zone. CLINICAL SIGNIFICANCE: Some complex cases in restorative dentistry can be transformed to straight forward cases with the help of minor orthodontic tooth movements.
Asunto(s)
Estética Dental , Diente , Odontología , Planificación de Atención al Paciente , Técnicas de Movimiento DentalRESUMEN
Inadvertent Er:YAG laser irradiation occurs in dentistry and may harm restorative materials in teeth. The aim of this in vitro study was to quantify Er:YAG laser-induced damage to a nanohybrid composite in simulated clinical scenarios for inadvertent direct and indirect (reflection) laser irradiation. The simulation was performed by varying the output energy (OE;directËindirect) reaching the specimen and the operating distance (OD;directËindirect). Composite specimens were irradiated by an Er:YAG laser. The ablation threshold was determined and clinically relevant parameters were applied (n = 6 for each OE/OD combination) for direct (OE: 570 mJ/OD: 10 mm, OE: 190 mJ/OD: 10 mm) and indirect irradiation (OE: 466 mJ/OD: 15 mm, OE: 57 mJ/OD: 15 mm, OE: 155 mJ/OD: 15 mm, OE: 19 mJ/OD: 15 mm). The extent of damage in the form of craters was evaluated using a laser scanning microscope (LSM) and a conventional light microscope (LM). The ablation threshold was determined to be 2.6 J/cm2. The crater diameter showed the highest value (LM: 1075 ± 18 µm/LSM: 1082 ± 17 µm) for indirect irradiation (reflectant:dental mirror) (OE: 466 mJ/OD: 15 mm). The crater depth showed the highest and comparable value for direct (OE: 570 mJ/OD: 10 mm; LSM: 89 ± 2 µm) and indirect irradiation (OE: 466 mJ/OD: 15 mm; LSM: 90 ± 4 µm). For each OD, the crater diameter, depth, and volume increased with higher laser fluence. However, the OD-and thus the laser spot diameter-also had an enlarging effect. Thus, indirect irradiation (reflectant:dental mirror) with only 47% of the laser fluence of direct irradiation led to a larger diameter and a comparable depth. The three-dimensional extent of the crater was large enough to cause roughening, which may lead to plaque accumulation and encourage caries, gingivitis, and periodontitis under clinical conditions. Clinicians should be aware that reflected irradiation can still create such craters.
Asunto(s)
Láseres de Estado Sólido , Diente , Láseres de Estado Sólido/efectos adversos , Microscopía Electrónica de Rastreo , Diente/cirugíaRESUMEN
STATEMENT OF PROBLEM: Three-dimensional (3D) implant planning facilitates determining the optimal position and number of implants, in terms of function and esthetics, by taking into account adjacent structures. Template-guided implant placement is an established procedure for implementing this planning, although the accuracy between the planned and the actual implant position is subject to many influences. The influences of the macrodesign of the implants and the sleeve materials used have rarely been investigated clinically. PURPOSE: The purpose of this prospective clinical study was to investigate the accuracy of template-guided implant placement according to the macrodesign of different implants and the design of the drill sleeve. MATERIAL AND METHODS: Implants were placed in 60 participants within 3 groups (n=20): tapered implant with a metal sleeve (T-MS), tapered implant with a polymeric sleeve (T-PS), and progressive tapered implant with a polymeric sleeve (XT-PS). After overlaying the 3D implant planning image with the postoperative intraoral scan, deviations were 2-dimensionally related to the implant shoulder (S) and the apex (A) in terms of height (2DHS/2DHA), mesiodistal (2DSmd/2DAmd) and buccolingual (2DSbo/2DAbo), as well as 3-dimensionally on the implant shoulder (3DS), on the apex (3DA), and on the axis deviation (Axis). The groups were compared by using the analysis of variance. The Tukey post hoc test was performed for normally distributed data to identify significant differences among groups (α=.05). RESULTS: The errors for 2DSmd and 2DSbo were 0.26 to 0.40 mm across all groups. The 3DS group varied between 0.67 and 0.87 mm. No significant differences were found in terms of the material of the sleeves or the macrodesign of the implants (P>.05). Significant differences were found for 2DHS (P=.029) and 2DHA (P=.016) between the groups with the different sleeves. Group T-PS showed the least height deviation. CONCLUSIONS: In terms of height deviation, significant differences were found among the groups, with deviations depending on the implant type and the sleeve type. Overall, the method showed a high level of accuracy, providing good predictability of the prosthetic rehabilitation.
RESUMEN
OBJECTIVES: This multicenter randomized controlled clinical trial was conducted to investigate whether the loading protocol of single dental implants placed in the midline of edentulous mandibles will influence the implant survival or prosthetic maintenance. MATERIALS AND METHODS: In total, 158 patients were randomly assigned either to the immediate loading group (n = 81) or to the delayed loading group (n = 77). All implants were loaded with an overdenture retained by a ball attachment. RESULTS: After 5 years, 102 patients attended the follow-up investigation. Immediately loaded single implants in the midline of the edentulous mandible revealed a statistically significant lower survival rate than implants loaded conventionally over an observation period of 5 years. In the immediate loading group, 9 implants failed within the first three months of implant loading. No further implant loss was recorded for this group. Two implants failed in the delayed loading group, whereas one implant had to be removed during second-stage surgery and the second five years after implant loading. Non-inferiority of the survival rate of the midline implant of the immediate loading group, compared with the delayed loading group, could not be shown (p = .79, CI immediate loading: 74.9%; 100.0%, CI delayed loading: 73.0%; 100.0%). The observed difference in implant survival between the two treatment groups over time was statistically significant. CONCLUSIONS: The results of the present study indicate that immediate loading of a single mandibular implant in the edentulous mandible should be considered only in exceptional cases.
Asunto(s)
Implantes Dentales , Carga Inmediata del Implante Dental , Arcada Edéntula , Implantación Dental Endoósea , Prótesis Dental de Soporte Implantado , Fracaso de la Restauración Dental , Prótesis de Recubrimiento , Humanos , Arcada Edéntula/cirugía , Mandíbula/cirugía , Resultado del TratamientoRESUMEN
OBJECTIVES: The knowledge about the influence of dental treatment on health-related quality of life (HRQoL) is still limited. The aim of this multicenter randomized controlled clinical trial was to assess the effect of stabilizing an existing complete denture, by means of a single mandibular implant, on HRQoL. Furthermore, the impact of the loading protocol, i.e., immediate or delayed loading, in edentulous patients was evaluated. METHODS: One hundred fifty-eight participants aged 60-89 years were randomly assigned to study group A (immediate loading; n = 81) and to group B (delayed loading; n = 78). All participants received a single midline implant in the mandible. The implants were either immediately loaded (group A) or after a closed healing period of 3 months (group B) by connecting the existing mandibular complete dentures to ball attachments. HRQoL was assessed with the Short Form-36 questionnaire of health (SF-36) at baseline, 4 months, and 24 months after implant loading. RESULTS: Improvement of HRQoL by means of a single implant-retained mandibular overdenture could not be demonstrated after 4 and 24 months of implant loading. Furthermore, the application of two different loading protocols did not influence HRQoL ratings of study participants. CONCLUSION: The loading protocol is not a factor, influencing HRQoL in patients treated by a single midline implant in the edentulous mandible. CLINICAL RELEVANCE: A single midline implant in the edentulous mandible, stabilizing a mandibular complete denture, cannot be recommended for improving HRQoL.
Asunto(s)
Implantes Dentales , Mandíbula , Anciano , Anciano de 80 o más Años , Prótesis Dental de Soporte Implantado , Dentadura Completa , Prótesis de Recubrimiento , Humanos , Carga Inmediata del Implante Dental , Arcada Edéntula , Persona de Mediana Edad , Calidad de Vida , Resultado del TratamientoRESUMEN
BACKGROUND: The aim of this prospective clinical study was to investigate differences between virtually planned and clinically achieved implant positions in completely template-guided implant placements as a function of the tooth area, the use of alveolar ridge preservation, the implant length and diameter, and the primary implant stability. METHODS: The accuracy of 48 implants was analyzed. The implants were placed in a completely template-guided manner. The data of the planned implant positions were superimposed on the actual clinical implant positions, followed by measurements of the 3D deviations in terms of the coronal (dc) and apical distance (da), height (h), angulation (ang), and statistical analysis. RESULTS: The mean dc was 0.7 mm (SD: 0.3), the mean da was 1.4 mm (SD: 0.6), the mean h was 0.3 mm (SD: 0.3), and the mean ang was 4.1° (SD: 2.1). The tooth area and the use of alveolar ridge preservation had no significant effect on the results in terms of the implant positions. The implant length had a significant influence on da (p = 0.02). The implant diameter had a significant influence on ang (p = 0.04), and the primary stability had a significant influence on h (p = 0.02). CONCLUSION: Template-guided implant placement offers a high degree of accuracy independent of the tooth area, the use of measures for alveolar ridge preservation or the implant configuration. A clinical benefit is therefore present, especially from a prosthetic point of view. TRIAL REGISTRATION: German Clinical Trial Register and the International Clinical Trials Registry Platform of the WHO: DRKS00005978 ; date of registration: 11/09/2015.
Asunto(s)
Proceso Alveolar/cirugía , Implantación Dental Endoósea , Implantes Dentales , Diente/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico , Femenino , Humanos , Masculino , Estudios Prospectivos , Resultado del TratamientoRESUMEN
OBJECTIVES: Diode lasers and the Nd:YAG laser are used in periodontal therapy and soft tissue surgery. Dental filling materials or cements might be inadvertently damaged. The underlying mechanism of the damage is based on the dental material's specific transmission and thus absorption behavior. MATERIALS AND METHODS: Twenty-four material representatives for composites, glass ionomer cements and other material classes (e.g., compomer) were processed to 100 µm and 200 µm planar specimens and spectroscopically measured for their collimated transmission in the photo spectrometer Varian Cary 5000. The (1) mean intensity of transmitted light was determined for the laser wavelengths of interest (810 nm, 940 nm, 980 nm, 1,064 nm) and used to calculate the (2) absorption lengths. RESULTS: The (1) mean intensity of transmitted light ranged between 9.51 % (Panavia F 2.0 for 810 nm) and 96.79% (Artegral Cem for 1,064 nm) for the composite specimens (100 µm) and was-with few exceptions-near zero for the representatives of glass ionomer cement and the other material classes. The (2) absorption lengths were between 0.06 mm (Panavia F 2.0 for all wavelengths of interest) and 1.33 mm (Coltène Duo Cement Plus for 1,064 nm) for the composites and below or equal 0.15 mm (PermaCem for 1,064 nm) for the few representatives of glass ionomer cements and the other material classes with mean intensities of transmitted light, which were not near zero and thus permitted to calculate absorption lengths. CONCLUSIONS: The transmission behavior varied between the different material classes and even within, albeit less pronounced. Composites generally showed the highest intensities of transmitted light and are thus least susceptible to surface damage by laser light (810 nm, 940 nm, 980 nm, 1,064 nm). The results can be used to improve and develop laser applications involving purposeful interactions between laser light and dental materials. Lasers Surg. Med. © 2019 Wiley Periodicals, Inc.
Asunto(s)
Resinas Compuestas/efectos de la radiación , Cementos Dentales/efectos de la radiación , Láseres de Semiconductores , Láseres de Estado Sólido , Absorción de Radiación , Resinas Compuestas/química , Cementos Dentales/química , Ensayo de MaterialesRESUMEN
OBJECTIVES: The aim of the present study was a systematic review and subsequent meta-analysis on biological complications of removable prostheses in the moderately reduced dentition. MATERIALS AND METHODS: A systematic literature search in established medical databases (MEDLINE, EMBASE, BIOSIS, SciSearch, Cochrane, FIZ Technik Web) and a hand search of relevant dental journals was conducted. The search terms were relevant MeSH terms, free search terms, and combinations of the two. The search included randomized controlled trials, prospective and retrospective studies with data on biological complications of removable dental prostheses in the moderately reduced dentition with at least 15 participants, an observation period of at least 2 years, and a drop-out rate of less than 25%. The selection of relevant publications was carried out at the title, abstract, and full-text level by at least two of the authors involved. The publications included were tabulated and analyzed. RESULTS: Of the original 12,994 matches, 1923 were analyzed by title, 650 by abstract, and 111 according to the full text. A total of 42 publications were ultimately included. The following parameters were evaluated. TOOTH LOSS: Results varied, depending on the observation period, between 0 and 18.1% for clasp-retained removable dental prostheses (RDPs), between 5.5 and 29% for attachment-retained RDPs, and between 5.5 and 51.7% for double crown-retained RDPs. CARIES: Results varied, depending on the observation period, between 0 and 32.7% for clasp-retained RDPs, between 1.8 and 29% for attachment-retained RDPs, and between 1.8 and 16.4% for double crown-retained RDPs. ENDODONTIC TREATMENT: Results varied, depending on the observation period, between 3.5 and 19.2% for clasp-retained RDPs, between 6.9 and 16.4% for attachment-retained RDPs, and between 0.6 and 13.9% for double crown-retained RDPs. TOOTH FRACTURE: Results varied, depending on the observation period, between 1.7 and 5.3% for clasp-retained RDPs, between 12.7 and 40% for attachment-retained RDPs, and between 0.4 and 4.4% for double crown-retained RDPs. TOOTH MOBILITY: There were no changes or improvements for clasp-retained RDPs. The better the pre-treatment and supportive care is, the smaller the differences are. For double crown-retained RDPs, a slight increase was found in one study. The results for the parameters probing depth and radiological bone loss were inconclusive. GINGIVAL RECESSION: Gingival recession seemed to be favored by a mandibular sublingual bar. Compared to fixed restorations, removable restorations seemed to be associated with a more pronounced need for dental treatment. Stringent pre-treatment and supportive care reduced the complication rates. CONCLUSIONS: Heterogeneous study designs and data analyses rendered a meta-analysis impossible, so that an evaluation at the highest level of evidence could not be performed. CLINICAL RELEVANCE: Within the limitations of this study, it would be correct to state that removable dental prostheses require intensive maintenance. Suitable pre-treatment and supportive care can lower the complication rates, in the absence of which they constitute trigger factors for (additional) biological complications.
Asunto(s)
Dentadura Parcial Removible/efectos adversos , Arcada Parcialmente Edéntula , Retención de Prótesis Dentales , HumanosRESUMEN
OBJECTIVE: The aim of this study was to investigate differences between the virtually planned and clinically achieved implant positions in completely template-guided implantations as a function of the type of edentulous space, the residual natural dentition, and the surgical implementation. MATERIALS AND METHODS: Fifty-six patient cases with a total of 122 implants were evaluated retrospectively. The implantations were completely template-based. The data of the planned implant positions were overlaid with the actual clinical implant positions, followed by measurements of the 3D deviations in terms of coronal (xc) and apical distance, height (xh), and angulation (ang) and statistical analysis. RESULTS: The mean xc was 1.2 mm (SD 0.7 mm); the mean xa was 1.8 mm (SD 0.9 mm), the mean xh was 0.8 mm (SD 0.7 mm); and the mean ang was 4.8° (SD 3.1). The type of edentulous space and the jaw (maxilla/mandible) had no significant effect on the results in terms of implant positions. The presence of an adjacent natural tooth at the time of implantation had a significant influence on xh (p = 0.04) and ang (p = 0.05). No significant differences were found regarding the surgical approach for any of the parameters examined. CONCLUSION: The results of our study are in the same range as those of other studies. Template-guided implantation offers a high degree of accuracy even in the presence of different configurations of the residual dentition or different surgical approaches. A clinical benefit is therefore present, especially from a prosthetic point of view. CLINICAL RELEVANCE: The clinically achievable accuracy can be described as sufficient for further prosthetic treatment, given the intrinsic and methodological tolerances, making prosthetic rehabilitation safe and predictable.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Implantación Dental Endoósea/métodos , Implantes Dentales , Imagenología Tridimensional/métodos , Cirugía Asistida por Computador/métodos , Simulación por Computador , Femenino , Humanos , Arcada Edéntula/rehabilitación , Masculino , Planificación de Atención al Paciente , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
The rehabilitation of the edentulous jaw using angulated implants and screw-retained retrievable fixed prosthetic dentures is a well-established treatment method. Possible advantages include the option to avoid bone augmentation, to provide an immediate long-term provisional restoration, and, where appropriate, to perform a minimally invasive procedure. A variety of prosthodontic solutions are available for the definitive restoration, not least allowing the patient's financial situation to be accommodated. Implementing this concept requires systematic planning and an exacting surgical procedure. It makes sense to rely on a computer-assisted process for this purpose as it standardizes the procedure and makes it reproducible, with all the benefits this entails. The present report highlights the consistent integration of virtual planning and computer-aided design/computer-aided manufacturing (CAD/CAM), from the surgical template to the immediate long-term provisional restoration. The relevant procedures are described in general terms and illustrated by a patient case.
Asunto(s)
Diseño Asistido por Computadora , Prótesis Dental de Soporte Implantado , Restauración Dental Provisional , Arcada Edéntula/cirugía , Flujo de Trabajo , Humanos , Maxilar/cirugíaRESUMEN
OBJECTIVE: The insertion of implants through template-guided surgery is an established method. At the present time, the static navigation is based on sleeves integrated into the guides, through which drill bits of the corresponding size are passed. The present clinical trial is designed to test a new sleeveless system to determine the precision of implant insertion for one-piece ceramic implants. MATERIALS AND METHODS: For 12 patients, implant bed preparation and the insertion of the implants were done using a sleeveless implant guide. Twenty implants were inserted in this way and checked for precision. The check was done using a noninvasive method, which permitted comparison of the planning data with the actually realized positions after superimposition. RESULTS: The mean deviations were 0.52 mm (95% CI: 0.37 to 0.67 mm) at the crestal position of the implant, and 0.82 mm (95% CI: 0.56 to 1.08 mm) at the apical tip of the implant. The height deviation was 0.35 mm (95% CI: 0.01 to 0.68 mm). The mean angular deviation was measured as 2.85 degrees (95% CI: 2.18 to 3.51 degrees). CONCLUSION: The values showed good precision in all the parameters measured. The results were thus in a range equal to or better than the mean precision found in numerous clinical trials described in the literature. In particular, the method showed little deviation, as illustrated by the confidence interval (CI), but also by the clinically critical maximum deviations.
Asunto(s)
Implantación Dental Endoósea/instrumentación , Imagenología Tridimensional , Cirugía Asistida por Computador/instrumentación , Adulto , Anciano , Implantación Dental Endoósea/métodos , Implantes Dentales , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Adulto JovenRESUMEN
OBJECTIVES: Being a secondary outcome in a multicenter randomized controlled trial, the present analysis focused on interdental spacing in the shortened dental arch (SDA). The aim was to evaluate changes in interdental spacing in dependence of two different treatments after an observation period of up to 5 years. MATERIAL AND METHODS: Patients were either treated with a partial removable dental prosthesis (PRDP) for molar replacement (PRDP group) or according to the SDA concept aiming at a premolar occlusion (SDA group) in a randomized manner. Interdental spacing in the anterior region was measured with gauges and categorized as "0" (<0.1 mm), "1" (<0.5 mm), "2" (0.5-1 mm), and "3" (>1 mm). The statistical analysis was performed with analysis of variance models followed by linear contrast. RESULTS: Ninety-one patients (SDA n = 41, PRDP n = 50) were included. Changes of interdental spacing were detected in 70.7 % of all cases. A significant difference between the mean score changes was found in the mandible comparing the PRDP group and the SDA group. The respective mean score changes from baseline to 5 years were 0.23 (SD 0.49) for the PRDP group and 0.02 (SD 0.30) for the SDA group (p = 0.023). CONCLUSIONS: Major interdental spacing could be observed in neither of the groups. The SDA concept resulted in a slightly better outcome. CLINICAL RELEVANCE: When deciding whether to replace missing molars, the present results give further support to the SDA concept.
Asunto(s)
Arco Dental/patología , Arcada Parcialmente Edéntula/rehabilitación , Oclusión Dental , Ajuste de Precisión de Prótesis , Dentadura Parcial Removible , Femenino , Humanos , Masculino , Diente Molar , Odontometría , Factores de Riesgo , Pérdida de DienteRESUMEN
OBJECTIVES: Evidence-based therapeutic recommendations for removable dental prostheses are still lacking. The aim of the present study was a systematic review and meta-analysis of the survival rates of removable dentures in the moderately reduced dentition. MATERIALS AND METHODS: In 2014, a systematic literature search in established medical databases (MEDLINE, EMBASE, BIOSIS, SciSearch, Cochrane, FIZ Technik Web) and a hand search of relevant dental journals were conducted. The search terms were relevant MeSH terms, free search terms, and combinations of the two. The search included RCTs, prospective and retrospective studies on survival rates of removable dental prostheses in the moderately reduced dentition with at least 15 participants, an observation period of at least 2 years, and a dropout rate of less than 25 %. The selection of relevant publications was carried out at the title, abstract, and full-text level by at least two of the authors involved. The publications included were tabulated and analyzed. RESULTS: Of the original 12,994 matches, 1923 were analyzed by title, 650 by abstract, and 111 according to the full text. The final review included 19 publications, of which 6 were multiple publications. Cast-metal framework dentures exhibited failure rates of between 33 and 50 % after 5 years. One study with a 25-year observation period reported failure rates of 50 %. Better results were obtained with proper pretreatment and a good recall scheme. Bilateral attachment prostheses showed failure rates of between 11 and 30 % after 5 years. Unilateral attachment prostheses showed failure rates of 75 % after 5 years. Double-crown prostheses dentures show failure rates of 0 to 21.7 % after 3 to 6 years. CONCLUSIONS: Heterogeneous study designs and data analyses rendered a meta-analysis impossible, so that an evaluation at the highest level of evidence could not be performed. CLINICAL RELEVANCE: Within the limitations of this study, it would be correct to state that removable dental prostheses, given suitable pretreatment and follow-up regimes, can provide satisfactory solutions. Based on only one paper, they revealed acceptable results even over a very long observation period (25 years).
Asunto(s)
Dentadura Parcial Removible , Arcada Parcialmente Edéntula/rehabilitación , Coronas , Diseño de Prótesis Dental , Prótesis Dental de Soporte Implantado , Fracaso de la Restauración Dental , Retención de Dentadura , HumanosRESUMEN
OBJECTIVES: The aim of this multi-center, randomized controlled trial was to assess the impact of missing posterior support on the risk for temporomandibular disorder (TMD) pain by comparing patients with either shortened dental arches (SDA) or molar replacement by removable dental prostheses (RDP). METHODS: A sample of 215 patients with bilateral molar loss in at least one jaw was consecutively recruited in 14 prosthodontic departments of dental schools in Germany. Of the initial sample, 152 patients (mean age: 59.7 years; 53.9 % female) received randomly allocated interventions (SDA: n = 71; RDP: n = 81). Presence of TMD pain was assessed using patients' self-reports and was verified by physical examination and by pain intensity, as the mean of current pain, worst pain, and average pain in the last 6 months, with 10-point ordinal rating scales. Assessments were performed before treatment and at follow-ups until 60 months after treatment. Impact of interventions on TMD risk and pain intensity was computed by applying logistic and linear random-intercept models. RESULTS: Tooth replacement (RDP) did not significantly change the risk for self-reported (odds ratio [OR]: 1.1; confidence interval [CI]: 0.4 to 3.4) or clinically verified (OR: 0.7; CI: 0.1 to 4.3) TMD pain compared to no tooth replacement (SDA). Mean characteristic pain intensity was virtually identical in both groups (Coeff: 0.01; CI: -0.30 to 0.32). CONCLUSION: Retaining or preservation of an SDA is not a major risk factor for TMD pain over the course of 5 years when compared to molar replacement with RPDs. CLINICAL RELEVANCE: Seemingly, missing molars do not have to be replaced in order to prevent TMD pain.
Asunto(s)
Arco Dental/patología , Arcada Parcialmente Edéntula/patología , Trastornos de la Articulación Temporomandibular/etiología , Dentadura Parcial Removible , Femenino , Alemania , Humanos , Arcada Parcialmente Edéntula/rehabilitación , Masculino , Persona de Mediana Edad , Diente Molar , Dimensión del Dolor , Medición de Riesgo , Factores de RiesgoRESUMEN
This randomized prospective clinical study aims to analyze the differences between the computer-assisted planned implant position and the clinically realized implant position using dynamic navigation. In the randomized prospective clinical study, 30 patients were recruited, of whom 27 could receive an implant (BLT, Straumann Institut AG, Basel, Switzerland) using a dynamic computer-assisted approach. Patients with at least six teeth in their jaws to be implanted were included in the study. Digital planning was performed using cone beam tomography imaging, and the visualization of the actual situation was carried out using an intraoral scan. Two different workflows with differently prepared reference markers were performed with 15 patients per group. The actual clinically achieved implant position was recorded with scan bodies fixed to the implants and an intraoral scan. The deviations between the planned and realized implant positions were recorded using evaluation software. The clinical examinations revealed no significant differences between procedures A and B in the mesiodistal, buccolingual and apicocoronal directions. For the mean angular deviation, group B showed a significantly more accurate value of 2.7° (95% CI 1.6-3.9°) than group A, with a value of 6.3° (95% CI 4.0-8.7°). The mean 3D deviation at the implant shoulder was 2.35 mm for workflow A (95% CI 1.92-2.78 mm) and 1.62 mm for workflow B (95% CI 1.2-2.05 mm). Workflow B also showed significantly higher accuracy in this respect. Similar values were determined at the implant apex. The clinical examination shows that sufficiently accurate implant placement is possible with the dynamic navigation system used here. The use of different workflows sometimes resulted in significantly different accuracy results. The data of the present study are comparable with the published findings of other static and dynamic navigation procedures.
RESUMEN
BACKGROUND AND OBJECTIVE: The aim of this in vitro study was to investigate the effect of Er:YAG laser irradiation on the ability of sodium hypochlorite (NaOCl) to dissolve soft tissue during endodontic procedures. MATERIALS AND METHODS: Two acrylic glass plates, each containing a semi-canal, were bolted together to form a complete canal. This geometry permitted one semi-canal to be filled with fine liver sausage of bovine origin dyed by methylene blue and the other with NaOCl (4.00-4.99% available chlorine; Sigma-Aldrich Corporation, St. Louis, MA), which was then activated by Er:YAG laser irradiation (KEY Laser 3; KaVo, Biberach, Germany) using a plain-ended fiber tip and a range of output energy and repetition rate. To achieve relatively low output energy from high input energy, the laser beam was attenuated by placing glass slides in the beam path. The resultant images acquired were analyzed using pixel-based analysis. Samples were statistically analyzed (two-way ANOVA, P < 0.05, univariate, bifactorial; IBM SPSS Statistics 19, SPSS Inc., Chicago, IL). RESULTS: Both output energy and repetition rate significantly influenced the tissue dissolution ability of NaOCl (P < 0.05). CONCLUSION: Within the limitations of this in vitro study, we conclude that laser activation of NaOCl at 200 mW output power leads to effective soft tissue dissolution. This finding can be of use to endodontists pursuing effective soft tissue dissolution from their irrigants.
Asunto(s)
Cavidad Pulpar/efectos de la radiación , Láseres de Estado Sólido/uso terapéutico , Terapia por Luz de Baja Intensidad , Irrigantes del Conducto Radicular/uso terapéutico , Tratamiento del Conducto Radicular , Hipoclorito de Sodio/uso terapéutico , Animales , Bovinos , Cavidad Pulpar/efectos de los fármacos , Modelos BiológicosRESUMEN
OBJECTIVES: The use of fast-setting impression materials with different viscosities for the one-stage impression technique demands precise working times when mixing. We examined the effect of varying working time on impression precision in a randomized clinical trial. MATERIALS AND METHODS: Focusing on tooth 46, three impressions were made from each of 96 volunteers, using either a polyether (PE: Impregum Penta H/L DuoSoft Quick, 3 M ESPE) or an addition-curing silicone (AS: Aquasil Ultra LV, Dentsply/DeTrey), one with the manufacturer's recommended working time (used as a reference) and two with altered working times. All stages of the impression-taking were subject to randomization. The three-dimensional precision of the non-standard working time impressions was digitally analyzed compared to the reference impression. Statistical analysis was performed using multivariate models. RESULTS: The mean difference in the position of the lower right first molar (vs. the reference impression) ranged from ±12 µm for PE to +19 and -14 µm for AS. Significantly higher mean values (+62 to -40 µm) were found for AS compared to PE (+21 to -26 µm) in the area of the distal adjacent tooth. CONCLUSIONS: Fast-set impression materials offer high precision when used for single tooth restorations as part of a one-stage impression technique, even when the working time (mixing plus application of the light- and heavy-body components) diverges significantly from the manufacturer's recommended protocol. CLINICAL RELEVANCE: Best accuracy was achieved with machine-mixed heavy-body/light-body polyether. Both materials examined met the clinical requirements regarding precision when the teeth were completely syringed with light material.
Asunto(s)
Materiales de Impresión Dental , Técnica de Impresión Dental , Precisión de la Medición Dimensional , Modelos Dentales , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Técnica de Impresión Dental/instrumentación , Método Doble Ciego , Femenino , Humanos , Imagenología Tridimensional , Masculino , Mandíbula , Ensayo de Materiales , Persona de Mediana Edad , Modelos Estadísticos , Diente Molar , Análisis Numérico Asistido por Computador , Polivinilos , Estudios Prospectivos , Resinas Sintéticas , Siloxanos , Estadísticas no Paramétricas , Factores de Tiempo , Viscosidad , Adulto JovenRESUMEN
The aim of this study was to conduct a systematic literature review with a subsequent meta-analysis on the technical complications and failures of removable partial denture (RPD) therapy in the moderately reduced dentition. A systematic literature search of established medical databases, last updated 06/2022, was conducted. RCTs and prospective and retrospective studies were included that had information on technical complications and failures of RPDs, at least 15 participants, an observation period of at least two years and a drop-out rate of less than 25%. Publications were selected on the title, abstract and full-text level by at least three of the participating authors. The evidence of the included studies was classified using the GRADE system. The bias risk was determined using the RoB2 tool and the ROBINS-I tool. Of 19,592 initial hits, 43 publications were included. Predominantly, retention of the prosthesis, retention loss of anchor crowns (decementations), fractures/repairs of frameworks, denture teeth, veneering or acrylic bases, and a need for relining were reported depending on prosthesis type and observation time. Focusing on technical complications and failures, only very heterogeneous data were found and publications with the highest quality level according to GRADE were scarce. Whenever possible, data on technical complications and failures should be reported separately when referencing the tooth, the prosthesis and the patient for comparability. Prostheses with differing anchorage types should be analyzed in different groups, as the respective complications and failures differ. A precise description of the kinds of complications and failures, as well as of the resulting follow-up treatment measures, should be given.
RESUMEN
Vertical ridge augmentation is a demanding and technique-sensitive surgical procedure. In the present case series, cone beam CT (CBCT) scans from the clinical routine of patients treated using a novel approach for vertical bone augmentation were assessed. All patients showed a single-tooth class 5 defect and were treated using a modification of the original shell technique. Cortical bone plates were replaced with a lamina composed of a partially demineralized porcine xenograft. CBCT scans of six consecutive patients were treated with the lamina and particulate bone from the mandibular ramus prior to a single tooth implant in the anterior maxilla were included. Pre- and postsurgical CBCT data sets were superimposed and analyzed digitally using surface matching and Boolean subtraction. The volume of the grafted area was calculated with and without the xenograft. The vertical gain of the ridge height measured in this case series varied from 7 to 11.3 mm. The mean vertical gain was 8.97 mm. The mean volume including the xenograft was 382.59 mm3 (SD 73.39) and 250.84 mm3 (SD 53.67) without the lamina. The modified shell technique used in this case series for the vertical augmentation of single-tooth class 5 defects provided sufficient bone for single implant restorations.
RESUMEN
BACKGROUND: As manual cell counting lacks objectivity in the assessment of positive marker cells in immunohistologic sections, there has been a shift to automated computer analysis solutions. However, quantifying inflammation around dental implants is still often done by manual cell counting. METHOD: With mucosal sections stained against MRP8 harvested around dental implants, we developed an automated method (AM) to identify positive marker cells. In this proof-of-concept study, we developed a procedure for its validation on an exemplary data set. Therefore, the sections were also analyzed with the manual method (MM). Intrarater and interrater reliability as well as time analyses were conducted. RESULTS: The newly developed AM was based on a color deconvolution in the open-source software ImageJ2. We embedded the determination of the most appropriate filter setting into the systematic validation procedure, implementing the intraclass correlation (ICC) and the Bland-Altman bias (BA). The newly developed validation procedure carried out on the data set of this proof-of-concept study resulted in an excellent reliability of the AM (ICC = 0.97). Both the reliability and time analyses' results were in favor of the AM. CONCLUSION: Our newly developed AM showed advantages in terms of repeatability and objectivity combined with a shorter duration. The detailed descriptions of its application and its validation procedure offers the opportunity to apply it for further immunohistologic questions. The prerequisite for the replacement of the MM is that the validation, carried out on a sufficient number of samples, leads to satisfactory results.