Uncovering the origin of radiationless losses in CuLaO2 by rationalizing the action of temperature and pressure on luminescence.

CuLaO2 is a rare-earth and dopant-free inorganic compound able to emit green light upon blue excitation. Its absorption amounts to 90% but its internal quantum efficiency is poor (<17%). The origin of this deleterious radiationless behavior is addressed by investigating the spectroscopic properties of this compound under the action of temperature and hydrostatic pressure in the 15-400 K and 1 bar-40 kbar intervals, and by combining the spectroscopic data with earlier results of DFT calculations. A two-step radiationless process is demonstrated, involving radiative re-absorption and cross-over to excitonic states.

Effect of Temperature and Pressure on Structural and Optical Properties of Organic-Inorganic Hybrid Manganese Halides.

Organic-inorganic hybrid metal halides have recently attracted attention in the global research field for their bright light emission, tunable photoluminescence wavelength, and convenient synthesis method. This study reports the detailed properties of (C10H16N)2MnBr4, which emits bright green light with a high photoluminescence quantum yield. Results of powder X-ray diffraction, photoluminescence, thermogravimetric analysis, and Raman spectra show the phase transition of (C10H16N)2MnBr4 at 430 K. This phase transition was identified as the solid to liquid state of (C10H16N)2MnBr4. Moreover, the pressure- and temperature-induced relationship between structural and optical properties in (C10H16N)2MnBr4 can be identified. This investigation provides deep insights into the luminescent properties of metal halide crystals and promotes further research.

Chromium Ion Pair Luminescence: A Strategy in Broadband Near-Infrared Light-Emitting Diode Design.

Portable near-infrared (NIR) light sources are in high demand for applications in spectroscopy, night vision, bioimaging, and many others. Typical phosphor designs feature isolated Cr3+ ion centers, and it is challenging to design broadband NIR phosphors based on Cr3+-Cr3+ pairs. Here, we explore the solid-solution series SrAl11.88-xGaxO19:0.12Cr3+ (x = 0, 2, 4, 6, 8, 10, and 12) as phosphors featuring Cr3+-Cr3+ pairs and evaluate structure-property relations within the series. We establish the incorporation of Ga within the magentoplumbite-type structure at five distinct crystallographic sites and evaluate the effect of this incorporation on the Cr3+-Cr3+ ion pair proximity. Electron paramagnetic measurements reveal the presence of both isolated Cr3+ and Cr3+-Cr3+ pairs, resulting in NIR luminescence at approximately 650-1050 nm. Unexpectedly, the origin of broadband NIR luminescence with a peak within the range 740-820 nm is related to the Cr3+-Cr3+ ion pair. We demonstrate the application of the SrAl5.88Ga6O19:0.12Cr3+ phosphor, which possesses an internal quantum efficiency of ∼85%, a radiant flux of ∼95 mW, and zero thermal quenching up to 500 K. This work provides a further understanding of spectral shifts in phosphor solid solutions and in particular the application of the magentoplumbites as promising next-generation NIR phosphor host systems.

Chromium(III)-Doped Fluoride Phosphors with Broadband Infrared Emission for Light-Emitting Diodes.

Two types of infrared fluoride phosphors, Cr3+-doped K3AlF6 and K3GaF6, were developed in this research. The K3Al1-xF6:xCr3+ and K3Ga1-yF6:yCr3+ fluoride phosphors were proven to be pure phase via X-ray diffraction refinement, which demonstrated that the procedure can be applied to large-scale production. Electron paramagnetic resonance measurements indicated that Cr3+ ions in cubic with respect to noncubic are coupled better with K3GaF6 than with K3AlF6. The main differences between these two phosphors, the site symmetry and pressure behavior of the spectra, were obtained in temperature- and pressure-dependent spectra. According to the calculation results, Cr3+ in fluorine coordination at ambient pressure indicates an intermediate crystal field. For the phosphor-converted light-emitting diodes (LEDs) fabricated from these two phosphors, the spectral range is from 650 to 1000 nm, which resulted in a radiant flux of 7-8 mW with an input power of 1.05 W. The research reveals detailed luminous properties, which will lead to a new way of studying Cr3+-doped fluoride phosphors and their application in LEDs.

Multi-Site Cation Control of Ultra-Broadband Near-Infrared Phosphors for Application in Light-Emitting Diodes.

Near-infrared (NIR) phosphors are fascinating materials that have numerous applications in diverse fields. In this study, a series of La3Ga5GeO14:Cr3+ phosphors, which was incorporated with Sn4+, Ba2+, and Sc3+, was successfully synthesized using solid-state reaction to explore every cationic site comprehensively. The crystal structures were well resolved by combining synchrotron X-ray diffraction and neutron powder diffraction through joint Rietveld refinements. The trapping of free electrons induced by charge unbalances and lattice vacancies changes the magnetic properties, which was well explained by a Dyson curve in electron paramagnetic resonance. Temperature and pressure-dependent photoluminescence spectra reveal various luminescent properties between strong and weak fields in different dopant centers. The phosphor-converted NIR light-emitting diode (pc-NIR LED) package demonstrates a superior broadband emission that covers the near-infrared (NIR) region of 650-1050 nm. This study can provide researchers with new insight into the control mechanism of multiple-cation-site phosphors and reveal a potential phosphor candidate for practical NIR LED application.

Study of persistent luminescence and thermoluminescence in SrSi2N2O2:Eu2+,M3+ (M = Ce, Dy, and Nd).

The process of persistent luminescence or glow-in-the-dark, the delayed emission of light of irradiated substances, has long fascinated researchers, who have made efforts to explain the underlying physical phenomenon as well as put it to practical use. However, persistent luminescence is an elusive and difficult process, both in terms of controlling or altering its properties, as well as providing a quantitative description. In this paper, we used SrSi2N2O2:Eu2+ as a model persistent phosphor, characterized by the broad distribution of structural defects and exhibiting long-lasting Eu2+ luminescence that is visible for a few minutes after switching off UV light. We investigated the persistent luminescence process by two complementary methods, namely, thermoluminescence and temperature-dependent persistent luminescence decay measurements. Analysis of experimental data allowed us to determine the depth distribution of traps, and allowed us to distinguish two different mechanisms by which the emission is delayed. The first, the temperature-dependent mechanism, is related to trap activation, while the second, temperature-independent mechanism is related to carrier migration. Finally, we employed the strategy of the co-doping of the phosphor SrSi2N2O2:Eu2+,M3+ (M = Ce, Nd, Dy) to modify the persistent luminescence properties.

Reply to the 'Comment on "Spectroscopic properties and location of the Ce3+ energy levels in Y3Al2Ga3O12 and Y3Ga5O12 at ambient and high hydrostatic pressure"' by Y. Wang, M. Glowacki, M. Berkowski, A. Kaminska and A. Suchocki, Phys. Chem. Chem. Phys., 2019, 21, DOI: 10.1039/C8CP06154H.

New results presented by Wang et al. showing the temperature dependence of the Y3Ga5O12:Ce3+ energy bandgap have been taken into account in the calculations of the changes of the energy distance between the lowest 5d state of Ce3+ and the edge of the conduction band. Our calculations show that the diminishing of the band gap energy with temperature has a negligible effect on the difference between the energy of the conduction band and the localized states of the 5d configuration of Ce3+, which means that the new experimental results do not undermine the validity of the conclusions of our previous paper.

Reply to the 'Comment on "Spectroscopic properties and location of the Ce3+ energy levels in Y3Al2Ga3O12 and Y3Ga5O12 at ambient and high hydrostatic pressure"' by Y. Wang, M. Glowacki, M. Berkowski, A. Kaminska and A. Suchocki, Phys. Chem. Chem. Phys., 2019, 21, DOI.

New results presented by Wang et al. showing the temperature dependence of the Y3Ga5O12:Ce3+ energy bandgap have been taken into account in the calculations of the changes of the energy distance between the lowest 5d state of Ce3+ and the edge of the conduction band. Our calculations show that the diminishing of the band gap energy with temperature has a negligible effect on the difference between the energy of the conduction band and the localized states of the 5d configuration of Ce3+, which means that the new experimental results do not undermine the validity of the conclusions of our previous paper.

Structural Evolution and Effect of the Neighboring Cation on the Photoluminescence of Sr(LiAl3 )1-x (SiMg3 )x N4 :Eu2+ Phosphors.

In this study, a series of Sr(LiAl3 )1-x (SiMg3 )x N4 :Eu2+ (SLA-SSM) phosphors were synthesized by a solid-solution process. The emission peak maxima of SLA-SSM range from 615 nm to 680 nm, which indicates structural differences in these materials. 7 Li solid-state NMR spectroscopy was utilized to distinguish between the Li(1)N4 and Li(2)N4 tetrahedra in SLA-SSM. Differences in the coordination environments of the two Sr sites were found which explain the unexpected luminescent properties. Three discernible morphologies were detected by scanning electron microscopy. Temperature-dependent photoluminescence and decay times were used to understand the diverse environments of europium ions in the two strontium sites Sr1 and Sr2, which also support the NMR analysis. Moreover, X-ray absorption near-edge structure studies reveal that the Eu2+ concentration in SLA-SSM is much higher than that in in SrLiAl3 N4 :Eu2+ and SrSiMg3 N4 :Eu2+ phosphors. Finally, an overall mechanism was proposed to explain the how the change in photoluminescence is controlled by the size of the coordinated cation.

Spectroscopic properties of high-temperature sintered SrS:0.05%Ce3+ under high hydrostatic pressure.

Luminescence properties of SrS:Ce pellets sintered at 1700 °C were investigated under high pressure. Two different Ce3+-related emissions were confirmed to appear in the blue-green and red parts of the spectrum and were shown to shift significantly and linearly to longer wavelengths with increasing pressure. Changes in decay times of both emissions were also thoroughly analyzed. The results confirmed that Ce3+ ion pairing/clustering occurring due to their enhanced mobility at high temperatures is responsible for the appearance of the recently reported red Ce3+ emission in sintered SrS:Ce pellets.

Comparison of quenching mechanisms in Gd3Al5-xGaxO12:Ce3+ (x = 3 and 5) garnet phosphors by photocurrent excitation spectroscopy.

In this work we present the results of photocurrent excitation spectroscopy (PCE) of Gd3Al2Ga3O12:Ce3+ (GAGG:Ce3+) and Gd3Ga5O12:Ce3+ (GGG:Ce3+) performed at temperatures ranging from 100 to 500 K supplemented by spectroscopic measurements (steady state and time resolved photoluminescence spectroscopy) performed at temperatures ranging from 10 to 500 K and at high pressure up to 300 kbar. The PCE spectra contain bands related to transitions from the ground state 2F5/2 of the 4f1 electronic configuration to the crystal field split states related to the 5d1 electronic configuration of Ce3+. This implicates the presence of the autoionization process - transfer of electrons from the localized, excited states of Ce3+ to the conduction band (CB), directly linked to luminescence quenching of Ce3+. The mechanism of autoionization of GAGG:Ce3+ and GGG:Ce3+ was determined to be different on the grounds of differences in temperature dependence of photocurrent intensity. The latter system exhibits autoionization, which occurs when all of the 5d excited states are degenerated with the CB, whereas in the former system, the autoionization process is thermally assisted with an activation energy barrier (distance to the edge of the CB) of approximately 1600 cm-1. In GGG:Ce3+ the degeneracy of 5d1 states of Ce3+ was lifted by application of high pressure, shifting the edge of the CB up and exposing Ce3+ luminescence at 20 kbar. Further spectroscopic analyses of the pressure-temperature dependence of the luminescence decay time as well as the temperature dependence of photocurrent intensity of GGG:Ce3+ have independently shown existence of a luminescence quenching state located approximately 600 cm-1 below the CB, attributed to the impurity trapped exciton.

Control of Luminescence by Tuning of Crystal Symmetry and Local Structure in Mn4+ -Activated Narrow Band Fluoride Phosphors.

Mn4+ -doped fluoride phosphors have been widely used in wide-gamut backlighting devices because of their extremely narrow emission band. Solid solutions of Na2 (Six Ge1-x )F6 :Mn4+ and Na2 (Gey Ti1-y )F6 :Mn4+ were successfully synthesized to elucidate the behavior of the zero-phonon line (ZPL) in different structures. The ratio between ZPL and the highest emission intensity υ6 phonon sideband exhibits a strong relationship with luminescent decay rate. First-principles calculations are conducted to model the variation in the structural and electronic properties of the prepared solid solutions as a function of the composition. To compensate for the limitations of the Rietveld refinement, electron paramagnetic resonance and high-resolution steady-state emission spectra are used to confirm the diverse local environment for Mn4+ in the structure. Finally, the spectral luminous efficacy of radiation (LER) is used to reveal the important role of ZPL in practical applications.

Temperature effect on the emission spectra of narrow band Mn4+ phosphors for application in LEDs.

Temperature dependence of the luminescence shape and decay time of narrow band Mn4+ fluoride phosphors: Rb2GeF6:Mn4+ and KNaSiF6:Mn4+ was investigated. The temperature changes in the relative intensity between the zero-phonon line and both phonon sidebands were observed in both samples. The sideband spectra consist of three lines related to interaction with three different phonon modes labeled ν3, ν4 and ν6. We present a comprehensive quantum theory which allows calculation of the luminescence intensity and the luminescence lifetime by simultaneously taking into account odd parity crystal fields, odd parity phonon modes and spin-orbit coupling. Since we include all modes, for which the respective interaction strengths and energies of the phonons are known, our approach does not involve any free parameters. We also discuss our results in relation to the temperature dependence of the lifetime of the 2Eg → 4A2g transition, taking into account the quantum efficiency of the system and the migration of the excitation energy. The presented model is applicable to all materials doped with Mn4+ ions and also to any narrow line emitting phosphor, where a zero-phonon line and phonon structure is simultaneously observed in the emission spectrum.

Improvement of the Water Resistance of a Narrow-Band Red-Emitting SrLiAl3 N4 :Eu(2+) Phosphor Synthesized under High Isostatic Pressure through Coating with an Organosilica Layer.

A SrLiAl3 N4 :Eu(2+) (SLA) red phosphor prepared through a high-pressure solid-state reaction was coated with an organosilica layer with a thickness of 400-600 nm to improve its water resistance. The observed 4f(6) 5d→4f(7) transition bands are thought to result from the existence of Eu(2+) at two different Sr(2+) sites. Luminescence spectra at 10 K revealed two zero-phonon lines at 15377 (for Eu(Sr1)) and 15780 cm(-1) (for Eu(Sr2)). The phosphor exhibited stable red emission under high pressure up to 312 kbar. The configurational coordinate diagram gave a theoretical explanation for the Eu(2+/3+) result. The coated samples showed excellent moisture resistance while retaining an external quantum efficiency (EQE) of 70 % of their initial EQE after aging for 5 days under harsh conditions. White-light-emitting diodes of the SLA red phosphor and a commercial Y3 Al5 O12 :Ce(3+) yellow phosphor on a blue InGaN chip showed high color rendition (CRI=89, R9=69) and a low correlated color temperature of 2406 K.

Isolation and identification of microplastics in infant formulas - A potential health risk for children.

Microplastics (MPs) are plastic particles between 0.1 and 5,000 µm in size that can contaminate food. Unfortunately, to date, little attention has been paid to analyzing the presence of such particles in baby foods. The present study aimed to determine the degree of contamination of infant formula with MPs. A total of thirty products were subjected to analysis. The research methodology used included the isolation of plastic particles, identification and characterization of MPs using advanced microscopic and spectroscopic techniques. Microplastics were detected in all tested samples. The most frequently identified polymers were polyamide, polyethylene, polypropylene, and poly(ethylene terephthalate). The particles exhibited diverse forms, including fibers, fragments, and films, displaying a range of colors such as colorless, black, and brown particles. Furthermore, the daily intake of MPs by children fed exclusively infant formula was estimated to be approximately 49 ± 32 MPs. This poses a potential health risk for the youngest.

Hidden Hexavalent Chromium Ions with Subtle Structural Evolution in Near-Infrared Phosphors.

Cr-doped inorganic materials are pivotal in developing near-infrared optical materials; however, multivalent Cr ions and their respective distribution in the materials remain ambiguous. Herein, a series of Li(Sc1-xInx)O2:Cr phosphors containing both Cr3+/Cr6+ ions are prepared. High-resolution synchrotron X-ray diffraction (XRD) reveals two similar phases in Li(Sc1-xInx)O2. Raman spectra further confirm distinct scattering patterns for the two end-member compositions, corroborating the findings from the synchrotron XRD analysis. Cr K-edge X-ray absorption near-edge structure and extended X-ray absorption fine structure demonstrate that most Cr ions in the as-prepared samples are Cr6+, while Cr3+ becomes dominant after washing with water. Moreover, the source and distribution of Cr3+ and Cr6+ ions in the as-prepared and washed samples are revealed through X-ray fluorescence and X-ray excited optical luminescence techniques, which indicate that Cr6+ ions aggregate within the sample, while Cr3+ ions are evenly distributed. Photoluminescence, decay curves, and line shape analyses are implemented to resolve the electron-lattice interactions, and the corresponding mechanisms are provided to explain the asymmetry between photoluminescence and photoluminescence excitation spectra. Overall, this study provides valuable insights into the distribution of low-concentration multivalence ions in solid-state materials and offers a deeper understanding of the approaches to precisely resolve the subtle changes in the crystal structure.

Advancing Near-Infrared Light Sources: Enhancing Chromium Emission through Cation Substitution in Ultra-Broadband Near-Infrared Phosphors.

The growing interest in the use of near-infrared (NIR) radiation for spectroscopy, optical communication, and medical applications spanning both NIR-I (700-900 nm) and NIR-II (900-1700 nm) has driven the need for new NIR light sources. NIR phosphor-converted light-emitting diodes (pc-LEDs) are expected to replace traditional lamps mainly due to their high efficiency and compact design. Broadband NIR phosphors activated by Cr3+ and Cr4+ have attracted significant research interest, offering emission across a wide range from 700 to 1700 nm. In this work, we synthesized a series of Sc2(1-x)Ga2xO3:Cr3+/4+ materials (x = 0-0.2) with broadband NIR-I (Cr3+) and NIR-II (Cr4+) emission. We observed a substantial increase in the intensity of Cr3+ (approximately 77 times) by incorporating Ga3+ ions. Additionally, our investigation revealed that energy transfer occurred between Cr3+ and Cr4+ ions. Configuration diagrams are presented to elucidate the behavior of Cr3+ and Cr4+ ions within the Sc2O3 matrix. We also observed a phase transition at a pressure of 20.2 GPa, resulting in a new unknown phase where Cr3+ luminescence exhibited a high-symmetry environment. Notably, this study presents the pressure-induced shift of NIR Cr4+ luminescence in Sc2(1-x)Ga2xO3:Cr3+/4+. The linear shifts were estimated at 83 ± 3 and 61 ± 6 cm-1/GPa before and after the phase transition. Overall, our findings shed light on the synthesis, luminescent properties, temperature, and high-pressure behavior within the Sc2(1-x)Ga2xO3:Cr3+/4+ materials. This research contributes to the understanding and potential applications of these materials in the development of efficient NIR light sources and other optical devices.

Single Crystalline Films of Ce3+-Doped Y3MgxSiyAl5-x-yO12 Garnets: Crystallization, Optical, and Photocurrent Properties.

This research focuses on LPE growth, and the examination of the optical and photovoltaic properties of single crystalline film (SCF) phosphors based on Ce3+-doped Y3MgxSiyAl5-x-yO12 garnets with Mg and Si contents in x = 0-0.345 and y = 0-0.31 ranges. The absorbance, luminescence, scintillation, and photocurrent properties of Y3MgxSiyAl5-x-yO12:Ce SCFs were examined in comparison with Y3Al5O12:Ce (YAG:Ce) counterpart. Especially prepared YAG:Ce SCFs with a low (x, y < 0.1) concentration of Mg2+ and Mg2+-Si4+ codopants also showed a photocurrent that increased with rising Mg2+ and Si4+ concentrations. Mg2+ excess was systematically present in as-grown Y3MgxSiyAl5-x-yO12:Ce SCFs. The as-grown SCFs of these garnets under the excitation of α-particles had a low light yield (LY) and a fast scintillation response with a decay time in the ns range due to producing the Ce4+ ions as compensators for the Mg2+ excess. The Ce4+ dopant recharged to the Ce3+ state after SCF annealing at T > 1000 °C in a reducing atmosphere (95%N2 + 5%H2). Annealed SCF samples exhibited an LY of around 42% and similar scintillation decay kinetics to those of the YAG:Ce SCF counterpart. The photoluminescence studies of Y3MgxSiyAl5-x-yO12:Ce SCFs provide evidence for Ce3+ multicenter formation and the presence of an energy transfer between various Ce3+ multicenters. The Ce3+ multicenters possessed variable crystal field strengths in the nonequivalent dodecahedral sites of the garnet host due to the substitution of the octahedral positions by Mg2+ and the tetrahedral positions by Si4+. In comparison with YAG:Ce SCF, the Ce3+ luminescence spectra of Y3MgxSiyAl5-x-yO12:Ce SCFs greatly expanded in the red region. Using these beneficial trends of changes in the optical and photocurrent properties of Y3MgxSiyAl5-x-yO12:Ce garnets as a result of Mg2+ and Si4+ alloying, a new generation of SCF converters for white LEDs, photovoltaics, and scintillators could be developed.

Mechanoluminescence and Photoluminescence Heterojunction for Superior Multimode Sensing Platform of Friction, Force, Pressure, and Temperature in Fibers and 3D-Printed Polymers.

Endowing a single material with various types of luminescence, that is, exhibiting a simultaneous optical response to different stimuli, is vital in various fields. A photoluminescence (PL)- and mechanoluminescence (ML)-based multifunctional sensing platform is built by combining heterojunctioned ZnS/CaZnOS:Mn2+ mechano-photonic materials using a 3D-printing technique and fiber spinning. ML-active particles are embedded in micrometer-sized cellulose fibers for flexible optical devices capable of emitting light driven by mechanical force. Individually modified 3D-printed hard units that exhibit intense ML in response to mechanical deformation, such as impact and friction, are also fabricated. Importantly, they also allow low-pressure sensing up to ≈100 bar, a range previously inaccessible by any other optical sensing technique. Moreover, the developed optical manometer based on the PL of the materials demonstrates a superior high-pressure sensitivity of ≈6.20 nm GPa-1 . Using this sensing platform, four modes of temperature detection can be achieved: excitation-band spectral shifts, emission-band spectral shifts, bandwidth broadening, and lifetime shortening. This work supports the possibility of mass production of ML-active mechanical and optoelectronic parts integrated with scientific and industrial tools and apparatus.

Photoluminescence enhancement study in a Bi-doped Cs2AgInCl6 double perovskite by pressure and temperature-dependent self-trapped exciton emission.

Here, we report a halide precursor acid precipitation method to synthesize Cs2AgIn1-xBixCl6 (x = 0, 0.02, 0.04, 0.08, 0.16, 0.32, 0.64, and 1) microcrystals. Cs2AgInCl6 and Bi derivative double perovskites show broadband white light emission via self-trapped excitons (STEs) and have achieved the highest internal quantum efficiency of up to 52.4% at x = 0.08. Synchrotron X-ray diffraction confirmed the linear increase of lattice parameters and cell volume with Bi3+ substitution at In3+ sites. Absorbance, photocurrent excitation, and photoluminescence excitation spectra are used to observe possible transitions from the valence to the conduction band or free exciton (FE) states as well as transitions within local Bi3+ states. The broadband photoluminescence is quenched via a single nonradiative process with an activation energy ΔE = 1490 cm-1 for Cs2AgIn0.92Bi0.08Cl6. Under normal conditions, we observed STE emission, but applying external pressure alters the electronic structure such that at elevated pressure, the only emission via the FE state is observed. We anticipate that structure, temperature and pressure-dependent photoluminescence studies will help the future use of a single-source lead-free double perovskite for white light-emitting diode applications.