Functional characterization and structural insights of three cutinases from the ascomycete Fusarium verticillioides.

Cutinases are serine esterases that belong to the α/ß hydrolases superfamily. The natural substrates for these enzymes are cutin and suberin, components of the plant cuticle, the first barrier in the defense system against pathogen invasion. It is well-reported that plant pathogens produce cutinases to facilitate infection. Fusarium verticillioides, one important corn pathogens, is an ascomycete upon which its cutinases are poorly explored. Consequently, the objective of this study was to perform the biochemical characterization of three precursor cutinases (FvCut1, FvCut2, and FvCut3) from F. verticillioides and to obtain structural insights about them. The cutinases were produced in Escherichia coli and purified. FvCut1, FvCut2, and FvCut3 presented optimal temperatures of 20, 40, and 35 °C, and optimal pH of 9, 7, and 8, respectively. Some chemicals stimulated the enzymatic activity. The kinetic parameters revealed that FvCut1 has higher catalytic efficiency (Kcat/Km) in the p-nitrophenyl-butyrate (p-NPB) substrate. Nevertheless, the enzymes were not able to hydrolyze polyethylene terephthalate (PET). Furthermore, the three-dimensional models of these enzymes showed structural differences among them, mainly FvCut1, which presented a narrower opening cleft to access the catalytic site. Therefore, our study contributes to exploring the diversity of fungal cutinases and their potential biotechnological applications.

New frontiers of soil fungal microbiome and its application for biotechnology in agriculture.

The fungi-based technology provided encouraging scenarios in the transition from a conventionally based economic system to the potential security of sources closely associated with the agricultural sphere such as the agriculture. In recent years, the intensification of fungi-based processes has generated significant gains, additionally to the production of materials with significant benefits and strong environmental importance. Furthermore, the growing concern for human health, especially in the agriculture scenario, has fostered the investigation of organisms with high biological and beneficial potential for use in agricultural systems. Accordingly, this study offered a comprehensive review of the diversity of the soil fungal microbiome and its main applications in a biotechnological approach aimed at agriculture and food chain-related areas. Moreover, the spectrum of opportunities and the extensive optimization platform for obtaining fungi compounds and metabolites are discussed. Finally, future perspectives regarding the insurgency of innovations and challenges on the broad rise of visionary solutions applied to the biotechnology context are provided.

Enhancement of the Functional Properties of Mead Aged with Oak (Quercus) Chips at Different Toasting Levels.

Consumers increasingly prefer and seek functional beverages, which, given their characteristics, provide important bioactive compounds that help prevent and treat chronic diseases. Mead is a traditional fermented alcoholic beverage made from honey solution. The aging process of mead with oak chips is innovative and bestows functional characteristics to this beverage. Thus, in this study, we sought to develop and characterize a novel functional beverage by combining the health benefits of honey with the traditional aging process of alcoholic beverages in wood. Phenolic compounds, flavonoids, and antioxidant capacity were analyzed in mead using oak chips at different toasting levels and aged for 360 days. LC-ESI-QTOF-MS/MS was used to analyze the chemical profile of different meads. Over time, the aging process with oak chips showed a higher total phenolic and flavonoid content and antioxidant capacity. Eighteen compounds belonging to the classes of organic acids, phenolic acids, flavonoids, and tannins were identified in meads after 360 days. Our findings revealed that the addition of oak chips during aging contributed to p-coumaric, ellagic, abscisic, and chlorogenic acids, and naringenin, vanillin, and tiliroside significantly impacted the functional quality of mead.

Extraction and characterization of polysaccharide-enriched fractions from Phoma dimorpha mycelial biomass.

Ultrasound-assisted extraction (UAE) and pressurized hot water extraction (PHWE) were tested as advanced clean methods to obtain polysaccharides from Phoma dimorpha mycelial biomass. These methods were compared to conventional extraction (hot water extraction, HWE) in terms of polysaccharides-enriched fractions (PEF) yield. A central composite rotational design was performed for each extraction method to investigate the influence of independent variables on the yield and to help the selection of the condition with the highest yield using water as an extraction solvent. The best extraction condition of PEF yielded 12.02 wt% and was achieved when using UAE with direct sonication for 30 min under the intensity of 75.11 W/cm2 and pulse factor of 0.57. In the kinetic profiles, the highest yield (15.28 wt%) was obtained at 50 °C under an ultrasound intensity of 75.11 W/cm2 and a pulse factor of 0.93. Structural analysis of extracted polysaccharide was performed using Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermal property. The water solubility index, water holding capacity, and emulsification index of PEF were 31.3 ± 1.5%, 138.1 ± 3.2%, and 62.9 ± 2.3%, respectively. The submerged fermentation demonstrates the huge potential of Phoma dimorpha to produce polysaccharides with bioemulsifying properties as a biotechnologically cleaner alternative if compared to commercial petroleum-derived compounds. Furthermore, UAE and PHWE are green technologies, which can be operated at an industrial scale for PEF extraction.

Ultrasound as an alternative method to increase the extraction yield from chicken mecanically separated meatresidue collagen.

The residue from chicken mechanically separated meat (MSM) is a potential source for the extraction of collagen. However, this process requires the removal of many covalent crosslinks, which makes it quite complex. Ultrasound has been successfully used to extract collagen; it reduces the process time and increases the yield. However, information regarding the effects of this treatment on the structural and functional properties of proteins is still very limited. Therefore, the aims of the present study were to obtain collagen from chicken MSM residue and to test the effects of pre-treatment with ultrasonic probe and enzymatic extraction with pepsin in its yield, as well as to evaluate the properties of extracted collagen using gel electrophoresis, Fourier-transform infrared spectroscopy, solubility, and differential scanning calorimetry. Both the ultrasound and the enzymatic extraction had a positive effect on the extraction yield of collagen from chicken MSM residue without affecting its integrity. Using ultrasound led to an increase of up to 40% in yield when compared to treatments without ultrasound application. Five extraction treatments were considered. The extracted collagen exhibited high thermal stability (43.9-47.0 °C) and mainly type I structure. The use of ultrasound as pre-treatment, together with enzymatic extraction with pepsin, were effective in increasing the extraction yield of collagen from chicken MSM residue, as well as preserving the triple helical structure of the native collagen.

An overview of fungal biopolymers: bioemulsifiers and biosurfactants compounds production.

Fungal biopolymers have gained considerable attention from the scientific community for various applications due to their biological and physicochemical properties. The wide applications in several areas, especially in the food industry as a bioemulsifier and in the agricultural area as a biosurfactant, have expanded the knowledge on the production of fungal biopolymers to keep up with developments on this subject area. Recent scientific studies have disclosed novel routes, optimized parameters, increased yields, and other related approaches in order to produce and apply fungal bioemulsifiers and biosurfactants. However, there is a need to gather important information in order to provide a way forward. Therefore, this review presents an overview of properties, applications, and perspectives for encouraging further projects and investments in the near future by most categories of investors. The selection of culture media, the definition of cultivation parameters, extraction, recovery, and purification are the initial steps to indicate the conditions for scale-up. Indeed, scale-up is still one of the challenges in this biotechnological field, which could be solved by expanding the tests and operational productions in both pilot and industrial plants.

Separation of microbial oil produced by Mortierella isabellina using polymeric membranes.

The objective of this work was to concentrate, through a membrane separation process, the fatty acids from oil/solvent mixture. The oil was obtained by ultrasound-assisted extraction from freeze-dried cells of Mortierella isabellina. The concentration of the fatty acids was investigated using flat-sheet polymer membranes of ultrafiltration and nanofiltration. The effects of temperature and pressure were evaluated by the retention of the fatty acids. Oil retentions between 45.23 and 58.20% to ultrafiltration membrane and 43.50 and 56.00% to nanofiltration membrane were observed. The best condition for the ultrafiltration membrane was 4 bar and 40 °C and for nanofiltration membrane was 12 bar and 50 °C. The oil contains a high concentration of oleic acid and palmitic acid that is a desirable property for the biodiesel production. The results showed the applicability of this technology in the solvent recovery step whereas the oil recovered contains a high concentration of fatty acids.

Production of metabolites with antioxidant activity by Botryosphaeria dothidea in submerged fermentation.

Antioxidants are able of inhibiting free radicals and play an important role in human diet, protection of foods, anti-aging cosmetics, among others. Fungi have been highlighted in production of metabolites with biological activity, such as antioxidant. The main objective of this study was to select a fungus from resources of Brazilians Pampa and Atlantic Forest biomes with hability for production of antioxidants by submerged fermentation. The scavenging activity of the compounds was determined against radical 2.2-diphenyl-1-picrylhydrazyl (DPPH), superoxide and hydroxyl. Botryosphaeria dothidea exhibited higher potential for the production of antioxidants, and its supernatant showed percentage inhibition values of 94.47, 94.87 and 89.78% against DPPH, superoxide and hydroxyl radicals and IC50 of 0.206 mg/mL. The identification of the volatile compounds present in the broth verified the presence of the hexahydropyrrolizin-3-one; 1.2-benzenedicarboxylic acid bis(2-methylpropyl) ester and 3.6-bis(2-methylpropyl)-2.5-piperazinedione. According to this study, Botryosphaeria dothidea presents great potential to produce compounds with antioxidant activity.

Improving the soluble lipase-catalyzed biodiesel production through a two-step hydroesterification reaction system.

The application of lipases in liquid formulation instead of immobilized forms in the enzymatic biodiesel synthesis can make the process cost-efficient, more competitive, and sustainable. However, despite the benefits, the long reaction times required to achieve satisfactory yields is still a drawback of this biotechnological process. In this sense, employing the novel low-cost soluble NS40116 lipase, this paper proposes an innovative two-step hydroesterification reaction (TSHR) system as a technique of improving the reaction rate of an enzymatic biodiesel production. With the employment of two central composite statistical design to optimize the parameters of each of the reactions involved, the influence of the parameters "water concentration added to the reaction," "methanol-to-oil molar ratio," and "lipase load" on the process yield, besides the acid value of the samples, was investigated. After only 8 h of reaction, the highest fatty acid methyl ester yield reached was 97.1% with an acid value of 4.62 mg KOH g-1 utilizing a total of 8 wt% water, methanol-to-oil molar ratio of 6.3:1, and 0.70 wt% of lipase. Furthermore, the statistical models for both reactions indicated to be significant with 95% of reliability. Considering that the papers published using soluble lipases in a one-step batch process normally reach similar yields to those obtained in this research after 16 h to 24 h of reaction, the proposed system demonstrated to be a promising option of process configuration for the enzymatic production of biodiesel.

Production of cutinase by solid-state fermentation and its use as adjuvant in bioherbicide formulation.

In the present study, it was presented a strategy to maximize the cutinase production by solid-state fermentation from different microorganisms and substrates. The best results were observed using Fusarium verticillioides, rice bran being the main substrate. Maximum yield of cutinase obtained by the strain was 16.22 U/g. For concentration, ethanol precipitation was used, and the purification factor was 2.4. The optimum temperature and pH for enzyme activity were 35 °C and 6.5, respectively. The enzyme was stable at a wide range of temperature and at all pH values tested. The concentrated cutinase was used as an adjuvant in a formulation containing cutinase + bioherbicide. The use of enzyme increased the efficiency of bioherbicide, since cutinase was responsible to remove/degrade the cutin that recovery the weed leaves and difficult the bioherbicide absorption. Cutinase showed to be a promising product to be used in formulation of bioherbicides.

Cellulolytic enzyme production from agricultural residues for biofuel purpose on circular economy approach.

This study evaluated the production of cellulolytic enzymes from different agricultural residues. The crude enzyme extract produced was characterized and applied for saccharification of some agricultural residues. Maximum cellulolytic activities were obtained using soybean hulls. All enzymatic activities were highly stable at 40 °C at a pH range of 4.5-5.5. For stability at low temperatures, the enzyme extract was stored at freezing temperature and cooling for about 290 days without major loss of activity. The Km values found for total cellulase (FPase), endoglucanase (CMCase), and xylanase were 19.73 mg ml-1, 0.65 mg ml-1, and 22.64 mg ml-1, respectively, and Vmax values were 0.82 mol min-1 mg-1, 0.62 mol min-1 mg-1, and 104.17 mol min-1 mg-1 to cellulose, carboxymethyl cellulose, and xylan, respectively. In the saccharification tests, the total amount of total reducing sugars (TRS) released from 1 g of soybean hulls catalyzed by the enzymes present in the crude enzyme extract was 0.16 g g-1 dry substrate.

Soluble lipase-catalyzed synthesis of methyl esters using a blend of edible and nonedible raw materials.

This work investigates the use of blends of edible and nonedible raw materials as an alternative feedstock to fatty acid methyl esters (FAME) production through enzymatic catalysis. As biocatalyst, liquid lipase from Thermomyces lanuginosus (Callera™ Trans L), was used. Under reaction conditions of 35 °C, methanol to feedstock molar ratio of 4.5:1 and 1.45% of catalyst load, the best process performance was reached using 9% of water concentration in the medium-yield of 79.9% after 480 min of reaction. In terms of use of tallow mixed with soybean oil, the best yield was obtained when 100% of tallow was used in the process-84.6% after 480 min of reaction-behavior that was associated with the degree of unsaturation of the feedstock, something by that time, not addressed in papers of the area. The results show that tallow can be used as an alternative to FAME production, catalyzed by soluble lipase.

Degradation of Amaranth azo dye in water by heterogeneous photo-Fenton process using FeWO4 catalyst prepared by microwave irradiation.

FeWO4 particles were synthesized by a simple, rapid and facile microwave technique and their catalytic properties in heterogeneous photo-Fenton reaction were evaluated. This material was employed in the degradation of Amaranth azo dye. Individual and interactive effects of operational parameters such as pH, dye concentration and H2O2 dosage on the decolorization efficiency of Amaranth dye were evaluated by 2(3) central composite design. According to characterization techniques, a porous material and a well-crystallized phase of FeWO4 oxide were obtained. Regarding the photo-Fenton reaction assays, up to 97% color and 58% organic carbon removal were achieved in the best experimental conditions. In addition, the photo-Fenton process maintained treatment efficiency over five catalyst reuse cycles to indicate the durability of the FeWO4 catalyst. In summary, the results reveal that the synthesized FeWO4 material is a promising catalyst for wastewater treatment by heterogeneous photo-Fenton process.

Separation and purification of fructooligosaccharides on a zeolite fixed-bed column.

Fructooligosaccharides (FOS), a well-known prebiotic product, are obtained by enzymatic synthesis and consist of a mixture of mono- and disaccharides. In this work, a methodology for their separation and purification was developed using a zeolite fixed-bed column. The effects of column temperature (40-60°C), eluent flow rate (0.10-0.14 mL/min), injected to bed volume percent ratio (2.6-5.1%), and ethanol concentration in the eluent (40-60%, v/v) were investigated using a fractionary factorial design (2(4-1)), having the separation efficiency and purity as target responses. Additional experiments were performed as well, where the temperature and ethanol concentration were studied in a central composite design (2(2)). In this work, the zeolite fixed-bed column was shown to be a good alternative for FOS purification, allowing a FOS purity of 90% and separation efficiency of 6.86 between FOS and glucose, using an eluent at 45°C with 60% ethanol concentration.

Modeling the microbial growth and temperature profile in a fixed-bed bioreactor.

Aiming to scale up and apply control and optimization strategies, currently is required the development of accurate plant models to forecast the process nonlinear dynamics. In this work, a mathematical model to predict the growth of the Kluyveromyces marxianus and temperature profile in a fixed-bed bioreactor for solid-state fermentation using sugarcane bagasse as substrate was built up. A parameter estimation technique was performed to fit the mathematical model to the experimental data. The estimated parameters and the model fitness were evaluated with statistical analyses. The results have shown the estimated parameters significance, with 95 % confidence intervals, and the good quality of process model to reproduce the experimental data.

Carbon nanotubes as supports for inulinase immobilization.

The commercial inulinase obtained from Aspergillus niger was non-covalently immobilized on multiwalled carbon nanotubes (MWNT-COOH). The immobilization conditions for the carbon nanotubes were defined by the central composite rotational design (CCRD). The effects of enzyme concentration (0.8%-1.7% v/v) and adsorbent:adsorbate ratio (1:460-1:175) on the enzyme immobilization were studied. The adsorbent:adsorbate ratio variable has positive effect and the enzyme concentration has a negative effect on the inulinase immobilization (U/g) response at the 90% significance level. These results show that the lower the enzyme concentration and the higher the adsorbent:adsorbate ratio, better is the immobilization. According to the results, it is possible to observe that the carbon nanotubes present an effective inulinase adsorption. Fast adsorption in about six minutes and a loading capacity of 51,047 U/g support using a 1.3% (v/v) inulinase concentration and a 1:460 adsorbent:adsorbate ratio was observed. The effects of temperature on the immobilized enzyme activity were evaluated, showing better activity at 50 °C. The immobilized enzyme maintained 100% of its activity during five weeks at room temperature. The immobilization strategy with MWNT-COOH was defined by the experimental design, showing that inulinase immobilization is a promising biotechnological application of carbon nanotubes.

Removal of hazardous pharmaceutical dyes by adsorption onto papaya seeds.

Papaya (Carica papaya L.) seeds were used as adsorbent to remove toxic pharmaceutical dyes (tartrazine and amaranth) from aqueous solutions, in order to extend application range. The effects of pH, initial dye concentration, contact time and temperature were investigated. The kinetic data were evaluated by the pseudo first-order, pseudo second-order and Elovich models. The equilibrium was evaluated by the Langmuir, Freundlich and Temkin isotherm models. It was found that adsorption favored a pH of 2.5, temperature of 298 K and equilibrium was attained at 180-200 min. The adsorption kinetics followed the pseudo second-order model, and the equilibrium was well represented by the Langmuir model. The maximum adsorption capacities were 51.0 and 37.4 mg g(-1) for tartrazine and amaranth, respectively. These results revealed that papaya seeds can be used as an alternative adsorbent to remove pharmaceutical dyes from aqueous solutions.

Submerged cultivation of Nigrospora sp. in batch and fed-batch modes for microbial oil production.

Microbial lipids are a valuable source of potential biofuels and essential polyunsaturated fatty acids. The optimization of the fermentation conditions is a strategy that affects the total lipid concentration. The genus Nigrospora sp. has been the target of investigations based on its potential bioherbicidal action. Therefore, this study developed a strategy to maximize the biomass concentration and lipid accumulation by Nigrospora sp. in submerged fermentation. Different media compositions and process variables were investigated in shaken flasks and bioreactor in batch and fed-batch modes. Maximum biomass concentration and lipid accumulations were 40.17 g/L and 21.32 wt% in the bioreactor, which was 2.1 and 5.4 times higher than the same condition in shaken flasks, respectively. This study presents relevant information to the production of fungal lipids since few investigations are exploring the fed-batch strategy to increase the yield of fungi lipids, as well as few studies investigating Nigrospora sp. to produce lipids.

Effect of magnetic field on the ultrafiltration of bovine serum albumin.

This work evaluates the effects of a static magnetic field on the permeation of bovine serum albumin (BSA) in a tangential ultrafiltration membrane module. Experimental tests were carried out at different pHs using a poly(sulfone) membrane with molecular weight cut off of 60 kDa under the influence of a 0.4 T neodymium-iron-boron magnetic field. Results showed an increase in the permeate flux of water after the cleaning procedures of the new and reused membranes in the presence of the magnetic field. The elusive mechanism of magnetic memory is also shown to take place for the water fluxes fully recovered after the cleaning procedures when the magnetic field was applied to the system before the permeation. When the magnetic field was applied during permeation, the water fluxes presented lower percent of recuperation after the cleaning procedures, thus suggesting that the BSA solution may have somewhat been influenced by magnetic memory.

Adsorption of leather dye onto activated carbon prepared from bottle gourd: equilibrium, kinetic and mechanism studies.

Activated carbon prepared from bottle gourd has been used as adsorbent for removal of leather dye (Direct Black 38) from aqueous solution. The activated carbon obtained showed a mesoporous texture, with surface area of 556.16 m(2) g(-1), and a surface free of organic functional groups. The initial dye concentration, contact time and pH significantly influenced the adsorption capacity. In the acid region (pH 2.5) the adsorption of dye was more favorable. The adsorption equilibrium was attained after 60 min. Equilibrium data were analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherm models. The equilibrium data were best described by the Langmuir isotherm, with maximum adsorption capacity of 94.9 mg g(-1). Adsorption kinetic data were fitted using the pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion models. The adsorption kinetic was best described by the second-order kinetic equation. The adsorption process was controlled by both external mass transfer and intraparticle diffusion. Activated carbon prepared from bottle gourd was shown to be a promising material for adsorption of Direct Black 38 from aqueous solution.