Combining Trivalent Ion-Doping with Halide Alloying to Increase the Efficiency of Tin Perovskites.

Tin-halide perovskites (THP) are emerging materials for photovoltaics with optoelectronic properties potentially rivaling lead-based analoges. Their efficiencies in solar cells are, however, severely limited by the high sensitivity of tin to oxygen and the heavy p-doping natively present in the material. While the effects of oxygen can be mitigated by using reducing agents upon the synthesis and by encapsulating the device, the native p-doping caused by the high density of acceptor defects remains a challenge to be further addressed for prolonging carrier lifetimes and, consequently, device efficiency. In this work, potential compositional engineering strategies aimed at reducing the p-doping of this class of materials and increasing their efficiency in solar cells are investigated. Based on density functional theory simulations it is demonstrated that THP doping with d1s2 trivalent ions effectively decreases the hole background density and the density of the deep defects responsible for the non-radiative recombination in these materials. This effect is enhanced by alloying iodide with small fractions of bromide, up to 33%. Higher bromide fractions, instead, are detrimental due to the increased non-radiative recombination. These results may provide useful guidelines to experimentalists for improving the optoelectronic quality of THPs and consequently of the ensuing devices.

Decoding ultrafast polarization responses in lead halide perovskites by the two-dimensional optical Kerr effect.

The ultrafast polarization response to incident light and ensuing exciton/carrier generation are essential to outstanding optoelectronic properties of lead halide perovskites (LHPs). A large number of mechanistic studies in the LHP field to date have focused on contributions to polarizability from organic cations and the highly polarizable inorganic lattice. For a comprehensive understanding of the ultrafast polarization response, we must additionally account for the nearly instantaneous hyperpolarizability response to the propagating light field itself. While light propagation is pivotal to optoelectronics and photonics, little is known about this in LHPs in the vicinity of the bandgap where stimulated emission, polariton condensation, superfluorescence, and photon recycling may take place. Here we develop two-dimensional optical Kerr effect (2D-OKE) spectroscopy to energetically dissect broadband light propagation and dispersive nonlinear polarization responses in LHPs. In contrast to earlier interpretations, the below-bandgap OKE responses in both hybrid CH3NH3PbBr3 and all-inorganic CsPbBr3 perovskites are found to originate from strong hyperpolarizability and highly anisotropic dispersions. In both materials, the nonlinear mixing of anisotropically propagating light fields results in convoluted oscillatory polarization dynamics. Based on a four-wave mixing model, we quantitatively derive dispersion anisotropies, reproduce 2D-OKE frequency correlations, and establish polarization-dressed light propagation in single-crystal LHPs. Moreover, our findings highlight the importance of distinguishing the often-neglected anisotropic light propagation from underlying coherent quasiparticle responses in various forms of ultrafast spectroscopy.

Modelling the Interaction between Carboxylic Acids and Zinc Oxide: Insight into Degradation of ZnO Pigments.

Computational modelling applied to cultural heritage can assist the characterization of painting materials and help to understand their intrinsic and external degradation processes. The degradation of the widely employed zinc oxide (ZnO)-a white pigment mostly used in oil paints-leads to the formation of metal soaps, complexes of Zn ions and long-chain fatty acids coming from the degradation of the oil binder. Being a serious problem affecting the appearance and the structural integrity of many oil paintings, it is relevant to characterize the structure of these complexes and to understand the reaction pathways associated with this degradation process. Density functional theory (DFT) calculations were performed to investigate the adsorption of the acetate and acetic acid on relatively large ZnO clusters and the formation of Zn-acetate complexes. Carboxylic acids with longer alkyl chains were then investigated as more realistic models of the fatty acids present in the oil medium. In addition, DFT calculations using a periodic ZnO slab were performed in order to compare the obtained results at different levels of theory. Optimization calculations as well as the formation energies of the ZnO@carboxylate coupled systems and the thermodynamics leading to possible degradation products were computed. Our results highlight the potential for DFT calculations to provide a better understanding of oil paint degradation, with the aim of contributing to the development of strengthening and conservation strategies of paintings.

The Doping Mechanism of Halide Perovskite Unveiled by Alkaline Earth Metals.

Halide perovskites are a strong candidate for the next generation of photovoltaics. Chemical doping of halide perovskites is an established strategy to prepare the highest efficiency and most stable perovskite-based solar cells. In this study, we unveil the doping mechanism of halide perovskites using a series of alkaline earth metals. We find that low doping levels enable the incorporation of the dopant within the perovskite lattice, whereas high doping concentrations induce surface segregation. The threshold from low to high doping regime correlates to the size of the doping element. We show that the low doping regime results in a more n-type material, while the high doping regime induces a less n-type doping character. Our work provides a comprehensive picture of the unique doping mechanism of halide perovskites, which differs from classical semiconductors. We proved the effectiveness of the low doping regime for the first time, demonstrating highly efficient methylammonium lead iodide based solar cells in both n-i-p and p-i-n architectures.

Effect of Transitional Metals (Mn and Ni) Substitution in LiCoPO4 Olivines.

Transition metal substitution is a key strategy to optimize the functional properties of advanced crystalline materials used as positive electrodes in secondary lithium batteries (LIBs). Here we investigate the structural alterations in the olivine lattice of Mn and Ni substituted LiCoPO4 phase and the impact on performance in LIBs. X-ray diffraction (XRD) and extended X-ray absorption experiments have been carried out in order to highlight the structural alterations induced by partial substitution of cobalt by manganese and nickel. XRD analysis suggests that substitution induces an expansion of the lattices and an increase of the antisite disorder between lithium and transition metal ions in the structure. XAS data highlight negligible electronic disorder but a relevant modulation in the local coordination around the different metal ions. Moreover, galvanostatic tests showed poor reversibility of the redox reaction compared to the pure LCP sample, and this failure is discussed in detail in view of the observed remarkable structural changes.

Electrochemical Hole Injection Selectively Expels Iodide from Mixed Halide Perovskite Films.

Halide ion mobility in metal halide perovskites remains an intriguing phenomenon, influencing their optical and photovoltaic properties. Selective injection of holes through electrochemical anodic bias has allowed us to probe the effect of hole trapping at iodide (0.9 V) and bromide (1.15 V) in mixed halide perovskite (CH3NH3PbBr1.5I1.5) films. Upon trapping holes at the iodide site, the iodide gradually gets expelled from the mixed halide film (as iodine and/or triiodide ion), leaving behind re-formed CH3NH3PbBr3 domains. The weakening of the Pb-I bond following the hole trapping (oxidation of the iodide site) and its expulsion from the lattice in the form of iodine provided further insight into the photoinduced segregation of halide ions in mixed halide perovskite films. Transient absorption spectroscopy revealed that the iodide expulsion process leaves a defect-rich perovskite lattice behind as charge carrier recombination in the re-formed lattice is greatly accelerated. The selective mobility of iodide species provides insight into the photoinduced phase segregation and its implication in the stable operation of perovskite solar cells.

Ultrafast THz Probe of Photoinduced Polarons in Lead-Halide Perovskites.

We study the nature of photoexcited charge carriers in CsPbBr_{3} nanocrystal thin films by ultrafast optical pump-THz probe spectroscopy. We observe a deviation from a pure Drude dispersion of the THz dielectric response that is ascribed to the polaronic nature of carriers; a transient blueshift of observed phonon frequencies is indicative of the coupling between photogenerated charges and stretching-bending modes of the deformed inorganic sublattice, as confirmed by DFT calculations.

Superatomic Two-Dimensional Semiconductor.

Structural complexity is of fundamental interest in materials science because it often results in unique physical properties and functions. Founded on this idea, the field of solid state chemistry has a long history and continues to be highly active, with new compounds discovered daily. By contrast, the area of two-dimensional (2D) materials is young, but its expansion, although rapid, is limited by a severe lack of structural diversity and complexity. Here, we report a novel 2D semiconductor with a hierarchical structure composed of covalently linked Re6Se8 clusters. The material, a 2D structural analogue of the Chevrel phase, is prepared via mechanical exfoliation of the van der Waals solid Re6Se8Cl2. Using scanning tunneling spectroscopy, photoluminescence and ultraviolet photoelectron spectroscopy, and first-principles calculations, we determine the electronic bandgap (1.58 eV), optical bandgap (indirect, 1.48 eV), and exciton binding energy (100 meV) of the material. The latter is consistent with the partially 2D nature of the exciton. Re6Se8Cl2 is the first member of a new family of 2D semiconductors whose structure is built from superatomic building blocks instead of simply atoms; such structures will expand the conceptual design space for 2D materials research.

Broadband Emission in Two-Dimensional Hybrid Perovskites: The Role of Structural Deformation.

Only a selected group of two-dimensional (2D) lead-halide perovskites shows a peculiar broad-band photoluminescence. Here we show that the structural distortions of the perovskite lattice can determine the defectivity of the material by modulating the defect formation energies. By selecting and comparing two archetype systems, namely, (NBT)2PbI4 and (EDBE)PbI4 perovskites (NBT = n-butylammonium and EDBE = 2,2-(ethylenedioxy)bis(ethylammonium)), we find that only the latter, subject to larger deformation of the Pb-X bond length and X-Pb-X bond angles, sees the formation of VF color centers whose radiative decay ultimately leads to broadened PL. These findings highlight the importance of structural engineering to control the optoelectronic properties of this class of soft materials.

How Photogenerated I2 Induces I-Rich Phase Formation in Lead Mixed Halide Perovskites.

Bandgap tunability of lead mixed halide perovskites (LMHPs) is a crucial characteristic for versatile optoelectronic applications. Nevertheless, LMHPs show the formation of iodide-rich (I-rich) phase under illumination, which destabilizes the semiconductor bandgap and impedes their exploitation. Here, it is shown that how I2 , photogenerated upon charge carrier trapping at iodine interstitials in LMHPs, can promote the formation of I-rich phase. I2 can react with bromide (Br- ) in the perovskite to form a trihalide ion I2 Br- (Iδ- -Iδ+ -Brδ- ), whose negatively charged iodide (Iδ- ) can further exchange with another lattice Br- to form the I-rich phase. Importantly, it is observed that the effectiveness of the process is dependent on the overall stability of the crystalline perovskite structure. Therefore, the bandgap instability in LMHPs is governed by two factors, i.e., the density of native defects leading to I2 production and the Br- binding strength within the crystalline unit. Eventually, this study provides rules for the design of chemical composition in LMHPs to reach their full potential for optoelectronic devices.

Aprotic Sulfur-Metal Batteries: Lithium and Beyond.

Metal-sulfur batteries constitute an extraordinary research playground that ranges from fundamental science to applied technologies. However, besides the widely explored Li-S system, a remarkable lack of understanding hinders advancements and performance in all other metal-sulfur systems. In fact, similarities and differences make all generalizations highly inconsistent, thus unavoidably suggesting the need for extensive research explorations for each formulation. Here we review critically the most remarkable open challenges that still hinder the full development of metal-S battery formulations, starting from the lithium benchmark and addressing Na, K, Mg, and Ca metal systems. Our aim is to draw an updated picture of the recent efforts in the field and to shed light on the most promising innovation paths that can pave the way to breakthroughs in the fundamental comprehension of these systems or in battery performance.

4,4'-(Anthracene-9,10-diylbis(ethyne-2,1-diyl))bis(1-methyl-1-pyridinium) Lead Iodide C30H22N2Pb2I6: A Highly Luminescent, Chemically and Thermally Stable One-Dimensional Hybrid Iodoplumbate.

A new one-dimensional hybrid iodoplumbate, namely, 4,4'-(anthracene-9,10-diylbis(ethyne-2,1-diyl))bis(1-methyl-1-pyridinium) lead iodide C30H22N2Pb2I6 (AEPyPbI), is reported here for the first time with its complete characterization. The material exhibits remarkable thermal stability (up to 300 °C), and it is unreactive under ambient conditions toward water and atmospheric oxygen, due to the quaternary nature of the nitrogen atoms present in the organic cation. The cation exhibits strong visible fluorescence under ultraviolet (UV) irradiation, and when its iodide is combined with PbI2, it forms AEPyPb2I6, an efficient light-emitting material, with a photoluminescence emission intensity comparable to that of high-quality InP epilayers. The structure determination was obtained using three-dimensional electron diffraction, and the material was extensively studied by using a wide range of techniques, such as X-ray powder diffraction, diffuse reflectance UV-visible spectroscopy, thermogravimetry-differential thermal analysis, elemental analysis, Raman and infrared spectroscopies, and photoluminescence spectroscopy. The emissive properties of the material were correlated with its electronic structure by using state-of-the-art theoretical calculations. The complex, highly conjugated electronic structure of the cation interacts strongly with that of the Pb-I network, giving rise to the peculiar optoelectronic properties of AEPyPb2I6. The material, considering its relatively easy synthesis and stability, shows promise for light-emitting and photovoltaic devices. The use of highly conjugated quaternary ammonium cations may be useful for the development of new hybrid iodoplumbates and perovskites with optoelectronic properties tailored for specific applications.

Origin of Broad Emission Induced by Rigid Aromatic Ditopic Cations in Low-Dimensional Metal Halide Perovskites.

The development of broadband emitters based on metal halide perovskites (MHPs) requires the elucidation of structure-emission property correlations. Herein, we report a combined experimental and theoretical study on a series of novel low-dimensional lead chloride perovskites, including ditopic aromatic cations. Synthesized lead chloride perovskites and their bromide analogues show both narrow and broad photoluminescence emission properties as a function of their cation and halide nature. Structural analysis shows a correlation between the rigidity of the ditopic cations and the lead halide octahedral distortions. Density functional theory calculations reveal, in turn, the pivotal role of octahedral distortions in the formation of self-trapped excitons, which are responsible for the insurgence of broad emission and large Stokes shifts together with a contribution of halide vacancies. For the considered MHP series, the use of conventional octahedral distortion parameters allows us to nicely describe the trend of emission properties, thus providing a solid guide for further materials design.

How Halide Alloying Influences the Optoelectronic Quality in Tin-Halide Perovskite Solar Absorbers.

Halide alloying in tin-based perovskites allows for photostable bandgap tuning between 1.3 and 2.2 eV. Here, we elucidate how the band edge energetics and associated defect activity impact the optoelectronic properties of this class of materials. We find that by increasing the bromide:iodide ratio, a simultaneous destabilization of acceptor defects (tin vacancies and iodine interstitials) and stabilization of donor defects (iodine vacancies and tin interstitials) occurs, with strong changes arising for Br contents exceeding 50%. This translates into a decreased doping which is, however, accompanied by a higher density of nonradiative recombination channels. Films with high Br content show a high degree of disorder and trap state densities, with the best optoelectronic quality being found for Br contents of around 33%. These observations match the open circuit voltage trend of tin-based mixed halide perovskite solar cells, supporting the relevance of optoelectronic properties and chemistry of defects to optimize wide-bandgap tin perovskite devices.

Defect Engineering to Achieve Photostable Wide Bandgap Metal Halide Perovskites.

Bandgap tuning is a crucial characteristic of metal-halide perovskites, with benchmark lead-iodide compounds having a bandgap of 1.6 eV. To increase the bandgap up to 2.0 eV, a straightforward strategy is to partially substitute iodide with bromide in so-called mixed-halide lead perovskites. Such compounds are prone, however, to light-induced halide segregation resulting in bandgap instability, which limits their application in tandem solar cells and a variety of optoelectronic devices. Crystallinity improvement and surface passivation strategies can effectively slow down, but not completely stop, such light-induced instability. Here we identify the defects and the intragap electronic states that trigger the material transformation and bandgap shift. Based on such knowledge, we engineer the perovskite band edge energetics by replacing lead with tin and radically deactivate the photoactivity of such defects. This leads to metal halide perovskites with a photostable bandgap over a wide spectral range and associated solar cells with photostable open circuit voltages.

The Origin of Broad Emission in ⟨100⟩ Two-Dimensional Perovskites: Extrinsic vs Intrinsic Processes.

2D metal halide perovskites can show narrow and broad emission bands (BEs), and the latter's origin is hotly debated. A widespread opinion assigns BEs to the recombination of intrinsic self-trapped excitons (STEs), whereas recent studies indicate they can have an extrinsic defect-related origin. Here, we carry out a combined experimental-computational study into the microscopic origin of BEs for a series of prototypical phenylethylammonium-based 2D perovskites, comprising different metals (Pb, Sn) and halides (I, Br, Cl). Photoluminescence spectroscopy reveals that all of the compounds exhibit BEs. Where not observable at room temperature, the BE signature emerges upon cooling. By means of DFT calculations, we demonstrate that emission from halide vacancies is compatible with the experimentally observed features. Emission from STEs may only contribute to the BE in the wide-band-gap Br- and Cl-based compounds. Our work paves the way toward a complete understanding of broad emission bands in halide perovskites that will facilitate the fabrication of efficient narrow and white light emitting devices.

Role of Terminal Group Position in Triphenylamine-Based Self-Assembled Hole-Selective Molecules in Perovskite Solar Cells.

The application of self-assembled molecules (SAMs) as a charge selective layer in perovskite solar cells has gained tremendous attention. As a result, highly efficient and stable devices have been released with stand-alone SAMs binding ITO substrates. However, further structural understanding of the effect of SAM in perovskite solar cells (PSCs) is required. Herein, three triphenylamine-based molecules with differently positioned methoxy substituents have been synthesized that can self-assemble onto the metal oxide layers that selectively extract holes. They have been effectively employed in p-i-n PSCs with a power conversion efficiency of up to 20%. We found that the perovskite deposited onto SAMs made by para- and ortho-substituted hole selective contacts provides large grain thin film formation increasing the power conversion efficiencies. Density functional theory predicts that para- and ortho-substituted position SAMs might form a well-ordered structure by improving the SAM's arrangement and in consequence enhancing its stability on the metal oxide surface. We believe this result will be a benchmark for the design of further SAMs.

Brightly Luminescent and Moisture Tolerant Phenyl Viologen Lead Iodide Perovskites for Light Emission Applications.

Lead halide perovskites are outstanding materials for optoelectronics, but they typically feature low stability against external agents. To overcome this drawback, LHPs based on quaternary ammonium cations, such as phenyl viologen lead iodide (PhVPI), were found to be promising candidates, being water-resistant and thermally stable. In this Letter, the optoelectronic properties of the PhVPI are investigated by a combined experimental-theoretical approach. Although the as-prepared material is photoluminescence-inactive, a short thermal (5 min @ 290 °C) or laser annealing turns PhVPI into a highly luminescent material, in the 600-1000 nm range. The PhVPI PL emission was characterized at different annealing conditions, and the structural evolution following thermal treatments was investigated by means of X-ray diffraction, Raman, and NMR spectroscopies. Besides this, the electronic structure and emission properties were investigated by density functional theory simulations. The intense optical emission and high stability make PhVPI an intriguing material for applications related to light-emitting devices.

Energy vs Charge Transfer in Manganese-Doped Lead Halide Perovskites.

Mn-doped lead halide perovskites exhibit long-lived dopant luminescence and enhanced host excitonic quantum yield. The contention between energy and charge transfer in sensitizing dopant luminescence in Mn-doped perovskites is investigated by state-of-the-art DFT calculations on APbX3 perovskites (X = Cl, Br, and I). We quantitatively simulate the electronic structure of Mn-doped perovskites in various charge and spin states, providing a structural/mechanistic analysis of Mn sensitization as a function of the perovskite composition. Our analysis supports both energy- and charge-transfer mechanisms, with the latter probably preferred in Mn:CsPbCl3 due to small energy barriers and avoidance of spin and orbital restrictions. An essential factor determining the dopant luminescence quantum yield in the case of charge transfer is the energetics of intermediate oxidized species, while bandgap resonance can well explain energy transfer. Both aspects are mediated by perovskite host band edge energetics, which is tuned in turn by the nature of the halide X.

Tin versus Lead Redox Chemistry Modulates Charge Trapping and Self-Doping in Tin/Lead Iodide Perovskites.

Tin halide perovskites make up the only lead-free material class endowed with optoelectronic properties comparable to those of lead iodide perovskites. Despite significant progress, the device efficiency and stability of tin halide perovskites are still limited by two potentially related phenomena, i.e., self-p-doping and tin oxidation. Both processes are likely related to defects; thus, understanding tin halide defect chemistry is a key step toward exploitation of this class of materials. We investigate the MASnI3 perovskite defect chemistry, as a prototype of the entire materials class, using state-of-the-art density functional theory simulations. We show that the inherently low ionization potential of MASnI3 is solely responsible of the high stability of tin vacancy and interstitial iodine defects, which are in turn at the origin of the material p-doping. Tin vacancies create a locally iodine-rich environment that could promote Sn(II) → Sn(IV) oxidation. The higher band edge energies of MASnI3 compared to those of MAPbI3 lead to the emergence of deep electron traps associated with undercoordinated tin defects (e.g., interstitial tin) and the suppression of deep transitions associated with undercoordinated iodine defects that are typical of MAPbI3. Thus, while lead iodide perovskites are dominated by iodine chemistry, tin chemistry dominates tin iodide perovskite defect chemistry. Mixed tin/lead perovskites exhibit an intermediate behavior and are predicted to be potentially free of deep traps. Compositional alloying with different metals is finally explored as a strategy for mitigating defect formation and self-p-doping in tin iodide perovskites.