Intrinsic reactivity of [OUCH]+ : Apparent synthesis of [OUS]+ by reaction with CS2.

RATIONALE: Building on our report that collision-induced dissociation (CID) can be used to create the highly reactive U-alkylidyne species [O=U≡CH]+ , our goal was to determine whether the species could be as an intermediate for synthesis of [OUS]+ by reaction with carbon disulfide (CS2 ). METHODS: Cationic uranyl-propiolate precursor ions were generated by electrospray ionization, and multiple-stage CID in a linear trap instrument was used to prepare [O=U≡CH]+ . Neutral CS2 was admitted into the trap through a modified He inlet and precision leak valves. RESULTS: The [O=U≡CH]+ ion reacts with CS2 to generate [OUS]+ . CID of [OUS]+ causes elimination of the axial sulfide ligand to generate [OU]+ . Using isotopically labeled reagent, we found that [OUS]+ reacts with O2 to create [UO2 ]+ . CONCLUSIONS: [O=U≡CH]+ proves to be a useful reagent ion for synthesis of [OUS]+ , a species that to date has only been created by gas-phase reactions of U+ and U2+ . Dissociation of [OUS]+ to create [OU]+ , but not [US]+ , and the efficient conversion of the species into [UO2 ]+ , is consistent with the relative differences in U-O and U-S bond energies.

Intrinsic chemistry of [OUCH]+: reactions with H2O, CH3C[triple bond, length as m-dash]N and O2.

We report the first experimental study of the intrinsic chemistry of a U-methylidyne species, focusing on reaction of [OUCH]+ with H2O, O2 and CH3C[triple bond, length as m-dash]N in the gas phase. DFT was also used to determine reaction pathways, and establish the mechanism by which [OUCH]+ is formed through collision-induced dissociation of [UO2(C[triple bond, length as m-dash]CH)]+.

Destruction and reconstruction of UO22+ using gas-phase reactions.

While the strong axial U[double bond, length as m-dash]O bonds confer high stability and inertness to UO22+, it has been shown that the axial oxo ligands can be eliminated or replaced in the gas-phase using collision-induced dissociation (CID) reactions. We report here tandem mass spectrometry experiments initiated with a gas-phase complex that includes UO22+ coordinated by a 2,6-difluorobenzoate ligand. After decarboxylation to form a difluorophenide coordinated uranyl ion, [UO2(C6F2H3)]+, CID causes elimination of CO, and then CO and C2H2 in sequential dissociation steps, to leave a reactive uranium fluoride ion, [UF2(C2H)]+. Reaction of [UF2(C2H)]+ with CH3OH creates [UF2(OCH3)]+, [UF(OCH3)2]+ and [UF(OCH3)2(CH3OH)]+. Cleavage of C-O bonds within these species results in the elimination of methyl cation (CH3+). Subsequent CID steps convert [UF(OCH3)2]+ to [UO2(F)]+ and similarly, [U(OCH3)3]+ to [UO2(OCH3)]+. Our experiments show removal of both uranyl oxo ligands in "top-down" CID reactions and replacement in "bottom-up" ion-molecule and dissociation steps.

Low-Cost, Compact Quadrupole Mass Filters with Unity Mass Resolution via Ceramic Resin Vat Photopolymerization.

This study reports novel, compact, and additively manufactured quadrupole mass filters (QMFs) with adequate filtering performance for practical mass spectrometry applications. The QMFs are monolithically fabricated via vat photopolymerization of glass-ceramic resin using 57 µm × 57 µm × 100 µm voxels, and selective electroless plating of nickel-boron. Experimental characterization of QMF prototypes at 1.74 MHz using FC-43 yields 131 Da peaks with 0.50 Da full width at half maximum (260 resolution), surpassing the resolution of reported miniaturized counterparts under similar conditions, and being on par with commercial, non-miniaturized, heavier devices. The sensitivity of the 3D-printed devices is estimated at 0.13 mA Torr-1 (comparable to that of optimized, commercial counterparts), while the devices attained up to 250 Da of mass range (limited by the driving electronics). The work is of interest to low-cost, capable mass spectrometry, 3D-printed instruments, and in-space manufacturing of complex instrumentation.

Collision-induced dissociation of [UO2 (NO3 )(O2 )]- and reactions of product ions with H2 O and O2.

We recently reported a detailed investigation of the collision-induced dissociation (CID) of [UO2 (NO3 )3 ]- and [UO2 (NO3 )2 (O2 )]- in a linear ion trap mass spectrometer (J. Mass Spectrom. DOI:10.1002/jms.4705). Here, we describe the CID of [UO2 (NO3 )(O2 )]- which is created directly by ESI, or indirectly by simple elimination of O2 from [UO2 (NO3 )(O2 )2 ]- . CID of [UO2 (NO3 )(O2 )]- creates product ions as at m/z 332 and m/z 318. The former may be formed directly by elimination of O2 , while the latter required decomposition of a nitrate ligand and elimination of NO2 . DFT calculations identify a pathway by which both product ions can be generated, which involves initial isomerization of [UO2 (NO3 )(O2 )]- to create [UO2 (O)(NO2 )(O2 )]- , from which elimination of NO2 or O2 will leave [UO2 (O)(O2 )]- or [UO2 (O)(NO2 )]- , respectively. For the latter product ion, the composition assignment of [UO2 (O)(NO2 )]- rather than [UO2 (NO3 )]- is supported by ion-molecule reaction behavior, and in particular, the fact that spontaneous addition of O2 , which is predicted to be the dominant reaction pathway for [UO2 (NO3 )]- is not observed. Instead, the species reacts with H2 O, which is predicted to be the favored pathway for [UO2 (O)(NO2 )]- . This result in particular demonstrates the utility of ion-molecule reactions to assist the determination of ion composition. As in our earlier study, we find that ions such as [UO2 (O)(NO2 )]- and [UO2 (O)(O2 )]- form H2 O adducts, and calculations suggest these species spontaneously rearrange to create dihydroxides.

Collision-induced dissociation of [UO2 (NO3 )3 ]- and [UO2 (NO3 )2 (O2 )]- and reactions of product ions with H2 O and O2.

Electrospray ionization (ESI) can produce a wide range of gas-phase uranyl (UO2 2+ ) complexes for tandem mass spectrometry studies of intrinsic structure and reactivity. We describe here the formation and collision-induced dissociation (CID) of [UO2 (NO3 )3 ]- and [UO2 (NO3 )2 (O2 )]- . Multiple-stage CID experiments reveal that the complexes dissociate in reactions that involve elimination of O2 , NO2 , or NO3 , and subsequent reactions of interesting uranyl-oxo product ions with (neutral) H2 O and/or O2 were investigated. Density functional theory (DFT) calculations reproduce experimental results and show that dissociation of nitrate ligands, with ejection of neutral NO2 , is favored for both [UO2 (NO3 )3 ]- and [UO2 (NO3 )2 (O2 )]- . DFT calculations also suggest that H2 O adducts to products such as [UO2 (O)(NO3 )]- spontaneously rearrange to create dihydroxides and that addition of O2 is favored over addition of H2 O to formally U(V) species.

Gas-Phase Deconstruction of UO22+: Mass Spectrometry Evidence for Generation of [OUVICH]+ by Collision-Induced Dissociation of [UVIO2(C≡CH)].

Because of the high stability and inertness of the U=O bonds, activation and/or functionalization of UO22+ and UO2+ remain challenging tasks. We show here that collision-induced dissociation (CID) of the uranyl-propiolate cation, [UVIO2(O2C-C≡CH)]+, can be used to prepare [UVIO2(C≡CH)]+ in the gas phase by decarboxylation. Remarkably, CID of [UVIO2(C≡CH)]+ caused elimination of CO to create [OUVICH]+, thus providing a new example of a well-defined substitution of an "yl" oxo ligand of UVIO22+ in a unimolecular reaction. Relative energies for candidate structures based on density functional theory calculations suggest that the [OUVICH]+ ion is a uranium-methylidyne product, with a U≡C triple bond composed of one σ-bond with contributions from the U df and C sp hybrid orbitals, and two π-bonds with contributions from the U df and C p orbitals. Upon isolation, without imposed collisional activation, [OUVICH]+ appears to react spontaneously with O2 to produce [UVO2]+. Graphical Abstract .