Engineering of a chitin deacetylase to generate tailor-made chitosan polymers.

Chitin deacetylases (CDAs) emerge as a valuable tool to produce chitosans with a nonrandom distribution of N-acetylglucosamine (GlcNAc) and glucosamine (GlcN) units. We hypothesized before that CDAs tend to bind certain sequences within the substrate matching their subsite preferences for either GlcNAc or GlcN units. Thus, they deacetylate or N-acetylate their substrates at nonrandom positions. To understand the molecular basis of these preferences, we analyzed the binding site of a CDA from Pestalotiopsis sp. (PesCDA) using a detailed activity screening of a site-saturation mutagenesis library. In addition, molecular dynamics simulations were conducted to get an in-depth view of crucial interactions along the binding site. Besides elucidating the function of several amino acids, we were able to show that only 3 residues are responsible for the highly specific binding of PesCDA to oligomeric substrates. The preference to bind a GlcNAc unit at subsite -2 and -1 can mainly be attributed to N75 and H199, respectively. Whereas an exchange of N75 at subsite -2 eliminates enzyme activity, H199 can be substituted with tyrosine to increase the GlcN acceptance at subsite -1. This change in substrate preference not only increases enzyme activity on certain substrates and changes composition of oligomeric products but also significantly changes the pattern of acetylation (PA) when N-acetylating polyglucosamine. Consequently, we could clearly show how subsite preferences influence the PA of chitosans produced with CDAs.

High molecular/low acetylated chitosans reduce adhesion of Campylobacter jejuni to host cells by blocking JlpA.

Infections caused by Campylobacter spp. are a major cause of severe enteritis worldwide. Multifactorial prevention strategies are necessary to reduce the prevalence of Campylobacter. In particular, antiadhesive strategies with specific inhibitors of early host-pathogen interaction are promising approaches to reduce the bacterial load. An in vitro flow cytometric adhesion assay was established to study the influence of carbohydrates on the adhesion of C. jejuni to Caco-2 cells. Chitosans with a high degree of polymerization and low degree of acetylation were identified as potent antiadhesive compounds, exerting significant reduction of C. jejuni adhesion to Caco-2 cells at non-toxic concentrations. Antiadhesive and also anti-invasive effects were verified by confocal laser scanning microscopy. For target identification, C. jejuni adhesins FlpA and JlpA were expressed in Escherichia coli ArcticExpress, and the influence of chitosan on binding to fibronectin and HSP90α, respectively, was investigated. While no effects on FlpA binding were found, a strong inhibition of JlpA-HSP90α binding was observed. To simulate real-life conditions, chicken meat was inoculated with C. jejuni, treated with antiadhesive chitosan, and the bacterial load was quantified. A strong reduction of C. jejuni load was observed. Atomic force microscopy revealed morphological changes of C. jejuni after 2 h of chitosan treatment, indicating disturbance of the cell wall and sacculi formation by electrostatic interaction of positively charged chitosan with the negatively charged cell surface. In conclusion, our data indicate promising antiadhesive and anti-invasive potential of high molecular weight, strongly de-acetylated chitosans for reducing C. jejuni load in livestock and food production. KEY POINTS: • Antiadhesive effects of chitosan with high DP/low DA against C. jejuni to host cells • Specific targeting of JlpA/Hsp90α interaction by chitosan • Meat treatment with chitosan reduces C. jejuni load.

Unique subsite specificity and potential natural function of a chitosan deacetylase from the human pathogen Cryptococcus neoformans.

Cryptococcus neoformans is an opportunistic fungal pathogen that infects ∼280,000 people every year, causing >180,000 deaths. The human immune system recognizes chitin as one of the major cell-wall components of invading fungi, but C. neoformans can circumvent this immunosurveillance mechanism by instead exposing chitosan, the partly or fully deacetylated form of chitin. The natural production of chitosans involves the sequential action of chitin synthases (CHSs) and chitin deacetylases (CDAs). C. neoformans expresses four putative CDAs, three of which have been confirmed as functional enzymes that act on chitin in the cell wall. The fourth (CnCda4/Fpd1) is a secreted enzyme with exceptional specificity for d-glucosamine at its -1 subsite, thus preferring chitosan over chitin as a substrate. We used site-specific mutagenesis to reduce the subsite specificity of CnCda4 by converting an atypical isoleucine residue in a flexible loop region to the bulkier or charged residues tyrosine, histidine, and glutamic acid. We also investigated the effect of CnCda4 deacetylation products on human peripheral blood-derived macrophages, leading to a model explaining the function of CnCda4 during infection. We propose that CnCda4 is used for the further deacetylation of chitosans already exposed on the C. neoformans cell wall (originally produced by CnChs3 and CnCda1 to 3) or released from the cell wall as elicitors by human chitinases, thus making the fungus less susceptible to host immunosurveillance. The absence of CnCda4 during infection could therefore promote the faster recognition and elimination of this pathogen.

Unraveling the Impact of Acetylation Patterns in Chitosan Oligomers on Cu2+ Ion Binding: Insights from DFT Calculations.

Chitosans are partially acetylated polymers of glucosamine, structurally characterized by their degree of polymerization as well as their fraction and pattern of acetylation. These parameters strongly influence the physico-chemical properties and biological activities of chitosans, but structure-function relationships are only poorly understood. As an example, we here investigated the influence of acetylation on chitosan-copper complexation using density functional theory. We investigated the electronic structures of completely deacetylated and partially acetylated chitosan oligomers and their copper-bound complexes. Frontier molecular orbital theory revealed bonding orbitals for electrophiles and antibonding orbitals for nucleophiles in fully deacetylated glucosamine oligomers, while partially acetylated oligomers displayed bonding orbitals for both electrophiles and nucleophiles. Our calculations showed that the presence of an acetylated subunit in a chitosan oligomer affects the structural and the electronic properties of the oligomer by generating new intramolecular interactions with the free amino group of neighboring deacetylated subunits, thereby influencing its polarity. Furthermore, the band gap energy calculated from the fully and partially deacetylated oligomers indicates that the mobility of electrons in partially acetylated chitosan oligomers is higher than in fully deacetylated oligomers. In addition, fully deacetylated oligomers form more stable complexes with higher bond dissociation energies with copper than partially acetylated ones. Interestingly, in partially acetylated oligomers, the strength of copper binding was found to be dependent on the pattern of acetylation. Our study provides first insight into the influence of patterns of acetylation on the electronic and ion binding properties of chitosans. Depending on the intended application, the obtained results can serve as a guide for the selection of the optimal chitosan for a specific purpose.

In silico and in vitro analysis of an Aspergillus niger chitin deacetylase to decipher its subsite sugar preferences.

Chitin deacetylases (CDAs) are found in many different organisms ranging from marine bacteria to fungi and insects. These enzymes catalyze the removal of acetyl groups from chitinous substrates generating various chitosans, linear copolymers consisting of N-acetylglucosamine (GlcNAc) and glucosamine. CDAs influence the degree of acetylation of chitosans as well as their pattern of acetylation, a parameter that was recently shown to influence the physicochemical properties and biological activities of chitosans. The binding site of CDAs typically consists of around four subsites, each accommodating a single sugar unit of the substrate. It has been hypothesized that the subsite preferences for GlcNAc or glucosamine units play a crucial role in the acetylation pattern they generate, but so far, this characteristic was largely ignored and still lacks structural data on the involved residues. Here, we determined the crystal structure of an Aspergillus niger CDA. Then, we used molecular dynamics simulations, backed up with a variety of in vitro activity assays using different well-defined polymeric and oligomeric substrates, to study this CDA in detail. We found that Aspergillus niger CDA strongly prefers a GlcNAc sugar unit at its -1 subsite and shows a weak GlcNAc preference at the other noncatalytic subsites, which was apparent both when deacetylating and N-acetylating oligomeric substrates. Overall, our results show that the combination of in vitro and in silico methods used here enables the detailed analysis of CDAs, including their subsite preferences, which could influence their substrate targets and the characteristics of chitosans produced by these species.

Synergistic Antimicrobial Activities of Chitosan Mixtures and Chitosan-Copper Combinations.

Several recent studies revealed the significant contribution of intensive agriculture to global climate change and biodiversity decline. However, synthetic pesticides and fertilizers, which are among the main reasons for these negative effects, are required to achieve the high performance of elite crops needed to feed the growing world population. Modern agro-biologics, such as biopesticides, biostimulants, and biofertilizers are intended to replace or reduce the current agro-chemicals, but the former are often difficult to combine with the latter. Chitosans, produced from the fisheries' byproduct chitin, are among the most promising agro-biologics, and copper fungicides are among the most widely used plant protectants in organic farming. However, the two active ingredients tend to form precipitates, hindering product development. Here, we show that partial hydrolysis of a chitosan polymer can yield a mixture of smaller polymers and oligomers that act synergistically in their antifungal activity. The low molecular weight (Mw) of this hydrolysate allows its combination with copper acetate, again leading to a synergistic effect. Combined, these synergies allow a 50% reduction in copper concentration, while maintaining the antifungal activity. This is potentially a significant step towards a more sustainable agriculture.

Synergistic Antimicrobial Effect of Chitosan Polymers and Oligomers.

This study evaluated the efficacy of the combined application of well-characterized chitosan polymer (degree of acetylation = 10%, degree of polymerization [DPn] = 90, and dispersity [ÐDP] = 2.8) and oligomers (partially acetylated chitosan polymers and oligosaccharides [paCOS]) (DP = 2 to 17) on conidia germination and mycelial growth of Fusarium graminearum, the major causal agent of Fusarium head blight in wheat. The polymer alone showed a higher inhibitory effect than the paCOS mixture alone, with half-maximal inhibitory concentrations of less than 50 µg ml-1 and more than 100 µg ml-1, respectively. Using time-lapse microscopy, we also showed that paCOS did not affect conidia germination at 50 µg ml-1, whereas chitosan polymer at the same concentration led to a delay in germination and in elongation of germ tubes. Scanning electron microscopy was used to observe the chitosan-induced changes in hyphal morphology. Surprisingly, the combination of chitosan polymer and paCOS led to strong synergistic effects in inhibiting conidia germination and fungal growth, as quantified by both the Abbot and Wadley equations. To our knowledge, this is the first report on a synergistic effect of a combination of chitosan polymers and oligomers, also highlighting for the first time the importance of ÐDP when studying structure-function relationships of functional biopolymers such as chitosan. The consequences of this finding for the improvement of chitosan-based antimicrobial or plant protective products are discussed. Given the economic importance of F. graminearum, this study suggests that the combination of chitosan polymer and oligomers can be used to support an efficient, sustainable plant protection strategy.[Formula: see text] Copyright © 2021 The Author(s). This is an open access article distributed under the CC BY 4.0 International license.

Chitin Deacetylases Are Required for Epichloë festucae Endophytic Cell Wall Remodeling During Establishment of a Mutualistic Symbiotic Interaction with Lolium perenne.

Epichloë festucae forms a mutualistic symbiotic association with Lolium perenne. This biotrophic fungus systemically colonizes the intercellular spaces of aerial tissues to form an endophytic hyphal network and also grows as an epiphyte. However, little is known about the cell wall-remodeling mechanisms required to avoid host defense and maintain intercalary growth within the host. Here, we use a suite of molecular probes to show that the E. festucae cell wall is remodeled by conversion of chitin to chitosan during infection of L. perenne seedlings, as the hyphae switch from free-living to endophytic growth. When hyphae transition from endophytic to epiphytic growth, the cell wall is remodeled from predominantly chitosan to chitin. This conversion from chitin to chitosan is catalyzed by chitin deacetylase. The genome of E. festucae encodes three putative chitin deacetylases, two of which (cdaA and cdaB) are expressed in planta. Deletion of either of these genes results in disruption of fungal intercalary growth in the intercellular spaces of plants infected with these mutants. These results establish that these two genes are required for maintenance of the mutualistic symbiotic interaction between E. festucae and L. perenne.[Formula: see text] Copyright © 2021 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

A bottom-up approach towards a bacterial consortium for the biotechnological conversion of chitin to L-lysine.

Chitin is an abundant waste product from shrimp and mushroom industries and as such, an appropriate secondary feedstock for biotechnological processes. However, chitin is a crystalline substrate embedded in complex biological matrices, and, therefore, difficult to utilize, requiring an equally complex chitinolytic machinery. Following a bottom-up approach, we here describe the step-wise development of a mutualistic, non-competitive consortium in which a lysine-auxotrophic Escherichia coli substrate converter cleaves the chitin monomer N-acetylglucosamine (GlcNAc) into glucosamine (GlcN) and acetate, but uses only acetate while leaving GlcN for growth of the lysine-secreting Corynebacterium glutamicum producer strain. We first engineered the substrate converter strain for growth on acetate but not GlcN, and the producer strain for growth on GlcN but not acetate. Growth of the two strains in co-culture in the presence of a mixture of GlcN and acetate was stabilized through lysine cross-feeding. Addition of recombinant chitinase to cleave chitin into GlcNAc2, chitin deacetylase to convert GlcNAc2 into GlcN2 and acetate, and glucosaminidase to cleave GlcN2 into GlcN supported growth of the two strains in co-culture in the presence of colloidal chitin as sole carbon source. Substrate converter strains secreting a chitinase or a ß-1,4-glucosaminidase degraded chitin to GlcNAc2 or GlcN2 to GlcN, respectively, but required glucose for growth. In contrast, by cleaving GlcNAc into GlcN and acetate, a chitin deacetylase-expressing substrate converter enabled growth of the producer strain in co-culture with GlcNAc as sole carbon source, providing proof-of-principle for a fully integrated co-culture for the biotechnological utilization of chitin. Key Points• A bacterial consortium was developed to use chitin as feedstock for the bioeconomy.• Substrate converter and producer strain use different chitin hydrolysis products.• Substrate converter and producer strain are mutually dependent on each other.

Chitosan coatings reduce fruit fly (Anastrepha obliqua) infestation and development of the fungus Colletotrichum gloeosporioides in Manila mangoes.

BACKGROUND: Mangoes are tropical fruits appreciated worldwide but are extremely perishable, being susceptible to decay, pest infestation and fungal diseases. Using the flavorful and highly valued 'Manila' cultivar, we examined the effect of second-generation chitosan coatings on shelf-life, phenolic compound variation, phytohormones, pest infestation by fruit flies (Anastrepha obliqua) and anthracnose disease caused by the fungus Colletotrichum gloeosporioides. RESULTS: We observed almost total elimination of A. obliqua eggs with 10 and 20 g L-1 chitosan in diluted acetic acid and a five- to sixfold reduction in anthracnose damage. Treatment with 20 g L-1 chitosan also extended the shelf-life. External (skin) and internal (pulp) discoloration processes were delayed. Fruit firmness was higher when compared with control and acetic acid treatments, and total soluble solids were lower in chitosan-treated fruit. Targeted and non-targeted metabolomics analyses on chitosan-coated fruit identified some phenolic compounds related to the tannin pathway. In addition, abscisic acid and jasmonic acid in the peel were downregulated in chitosan-coated mango peels. Both phytohormones and phenolic content may explain the reduced susceptibility of mangoes to anthracnose development and A. obliqua egg eclosion or larval development. CONCLUSIONS: We conclude that chitosan coatings represent an effective postharvest treatment that significantly reduces anthracnose disease, inhibits A. obliqua egg eclosion and significantly extends 'Manila' mango shelf-life, a key factor currently inhibiting large-scale commercialization of this valuable fruit. © 2020 Society of Chemical Industry.

The Pattern of Acetylation Defines the Priming Activity of Chitosan Tetramers.

The biological activity of chitosans depends on their degree of polymerization (DP) and degree of acetylation (DA). However, information could also be carried by the pattern of acetylation (PA): the sequence of ß-1,4-linked glucosamine (deacetylated/D) and N-acetylglucosamine (acetylated/A) units. To address this hypothesis, we prepared partially acetylated chitosan oligosaccharides from a chitosan polymer (DA = 35%, DPw = 905) using recombinant chitosan hydrolases with distinct substrate and cleavage specificities. The mixtures were separated into fractions DP4-DP12, which were tested for elicitor and priming activities in rice cells. We confirmed that both activities were influenced by DP, but also observed apparent DA-dependent priming activity, with the ADDD+DADD fraction proving remarkably effective. We then compared all four monoacetylated tetramers prepared using different chitin deacetylases and observed significant differences in priming activity. This demonstrates for the first time that PA influences the biological activity of chitosans, which can now be recognized as bona fide information-carrying molecules.

High-Throughput Screening Using UHPLC-MS To Characterize the Subsite Specificities of Chitosanases or Chitinases.

Partially acetylated chitosan oligosaccharides (paCOS), consisting of ß-1,4-linked N-acetyl-d-glucosamine and d-glucosamine units, possess diverse bioactivities that can be used for applications in, e.g., biomedicine, agriculture, and pharmaceutics. Establishing structure-function relationships and revealing modes of action requires the availability of structurally defined paCOS that can best be produced using chitin- and chitosan-modifying enzymes, such as chitinases and chitosanases, with known and defined subsite specificities. To enlarge the spectrum of such enzymes and, consequently, defined paCOS available, we have developed a two-step, microtiter plate-based high-throughput screening assay that allows quantification of the activity and subsite specificities of chitosan hydrolases. In a first step, the activities of the enzymes are quantified using a reducing end assay, and enzymes with sufficient activity are then screened for their subsite specificities using mass spectrometric analysis of their products when acting on well-defined chitosan polymers as substrates. The rapid UHPLC-ELSD-ESI-MS2 method does not require labeling steps or addition of standards, and the principal component analysis of the fragment ion intensities of just two isomeric oligomer groups, GlcNAc1GlcN3 and GlcNAc2GlcN2, sufficed to identify, in a directed evolution, the site-saturation mutagenesis library of Bacillus sp. MN chitosanase consisting of 167 muteins, enzymes that significantly differed in their subsite specificities from the wildtype enzyme. Detailed analyses of a few selected muteins proved that the screening method is efficient and accurate in predicting altered subsite specificities.

Preparation of Defined Chitosan Oligosaccharides Using Chitin Deacetylases.

During the past decade, detailed studies using well-defined 'second generation' chitosans have amply proved that both their material properties and their biological activities are dependent on their molecular structure, in particular on their degree of polymerisation (DP) and their fraction of acetylation (FA). Recent evidence suggests that the pattern of acetylation (PA), i.e., the sequence of acetylated and non-acetylated residues along the linear polymer, is equally important, but chitosan polymers with defined, non-random PA are not yet available. One way in which the PA will influence the bioactivities of chitosan polymers is their enzymatic degradation by sequence-dependent chitosan hydrolases present in the target tissues. The PA of the polymer substrates in conjunction with the subsite preferences of the hydrolases determine the type of oligomeric products and the kinetics of their production and further degradation. Thus, the bioactivities of chitosan polymers will at least in part be carried by the chitosan oligomers produced from them, possibly through their interaction with pattern recognition receptors in target cells. In contrast to polymers, partially acetylated chitosan oligosaccharides (paCOS) can be fully characterised concerning their DP, FA, and PA, and chitin deacetylases (CDAs) with different and known regio-selectivities are currently emerging as efficient tools to produce fully defined paCOS in quantities sufficient to probe their bioactivities. In this review, we describe the current state of the art on how CDAs can be used in forward and reverse mode to produce all of the possible paCOS dimers, trimers, and tetramers, most of the pentamers and many of the hexamers. In addition, we describe the biotechnological production of the required fully acetylated and fully deacetylated oligomer substrates, as well as the purification and characterisation of the paCOS products.

Enzymatic Production and Enzymatic-Mass Spectrometric Fingerprinting Analysis of Chitosan Polymers with Different Nonrandom Patterns of Acetylation.

Chitosans, a family of ß-(1,4)-linked, partially N-acetylated polyglucosamines, are considered to be among the most versatile and most promising functional biopolymers. Chemical analysis and bioactivity studies revealed that the functionalities of chitosans strongly depend on the polymers' degree of polymerization and fraction of acetylation. More recently, the pattern of acetylation ( PA) has been proposed as another important parameter to influence functionalities of chitosans. We therefore carried out studies on the acetylation pattern of chitosan polymers produced by three recombinant fungal chitin deacetylases (CDAs) originating from different species, namely, Podospora anserina, Puccinia graminis f. sp. tritici, and Pestalotiopsis sp. We analyzed the chitosans by 1H NMR, 13C NMR, and SEC-MALS and established new methods for PA analysis based on enzymatic mass spectrometric fingerprinting and in silico simulations. Our studies strongly indicate that the different CDAs indeed produce chitosans with different PA. Finally, Zimm plot analysis revealed that enzymatically treated polymers differ with respect to their second virial coefficient and radius of gyration indicating an influence of PA on polymer-solvent interactions.

Comparative characterization of putative chitin deacetylases from Phaeodactylum tricornutum and Thalassiosira pseudonana highlights the potential for distinct chitin-based metabolic processes in diatoms.

Chitin is generally considered to be present in centric diatoms but not in pennate species. Many aspects of chitin biosynthetic pathways have not been explored in diatoms. We retrieved chitin metabolic genes from pennate (Phaeodactylum tricornutum) and centric (Thalassiosira pseudonana) diatom genomes. Chitin deacetylase (CDA) genes from each genome (PtCDA and TpCDA) were overexpressed in P. tricornutum. We performed comparative analysis of their sequence structure, phylogeny, transcriptional profiles, localization and enzymatic activities. The chitin relevant proteins show complex subcellular compartmentation. PtCDA was likely acquired by horizontal gene transfer from prokaryotes, whereas TpCDA has closer relationships with sequences in Opisthokonta. Using transgenic P. tricornutum lines expressing CDA-green fluorescent protein (GFP) fusion proteins, PtCDA predominantly localizes to Golgi apparatus whereas TpCDA localizes to endoplasmic reticulum/chloroplast endoplasmic reticulum membrane. CDA-GFP overexpression upregulated the transcription of chitin synthases and potentially enhanced the ability of chitin synthesis. Although both CDAs are active on GlcNAc5 , TpCDA is more active on the highly acetylated chitin polymer DA60. We have addressed the ambiguous characters of CDAs from P. tricornutum and T. pseudonana. Differences in localization, evolution, expression and activities provide explanations underlying the greater potential of centric diatoms for chitin biosynthesis. This study paves the way for in vitro applications of novel CDAs.

The fluorescent protein sensor roGFP2-Orp1 monitors in vivo H2 O2 and thiol redox integration and elucidates intracellular H2 O2 dynamics during elicitor-induced oxidative burst in Arabidopsis.

Hydrogen peroxide (H2 O2 ) is ubiquitous in cells and at the centre of developmental programmes and environmental responses. Its chemistry in cells makes H2 O2 notoriously hard to detect dynamically, specifically and at high resolution. Genetically encoded sensors overcome persistent shortcomings, but pH sensitivity, silencing of expression and a limited concept of sensor behaviour in vivo have hampered any meaningful H2 O2 sensing in living plants. We established H2 O2 monitoring in the cytosol and the mitochondria of Arabidopsis with the fusion protein roGFP2-Orp1 using confocal microscopy and multiwell fluorimetry. We confirmed sensor oxidation by H2 O2 , show insensitivity to physiological pH changes, and demonstrated that glutathione dominates sensor reduction in vivo. We showed the responsiveness of the sensor to exogenous H2 O2 , pharmacologically-induced H2 O2 release, and genetic interference with the antioxidant machinery in living Arabidopsis tissues. Monitoring intracellular H2 O2 dynamics in response to elicitor exposure reveals the late and prolonged impact of the oxidative burst in the cytosol that is modified in redox mutants. We provided a well defined toolkit for H2 O2 monitoring in planta and showed that intracellular H2 O2 measurements only carry meaning in the context of the endogenous thiol redox systems. This opens new possibilities to dissect plant H2 O2 dynamics and redox regulation, including intracellular NADPH oxidase-mediated ROS signalling.

Design and Characterization of Chitosan Nanoformulations for the Delivery of Antifungal Agents.

Among different Candida species triggering vaginal candidiasis, Candida albicans is the most predominant yeast. It is commonly treated using azole drugs such as Tioconazole (TIO) and Econazole (ECO). However, their low water solubility may affect their therapeutic efficiency. Therefore, the aim of this research was to produce a novel chitosan nanocapsule based delivery system comprising of TIO or ECO and to study their suitability in vaginal application. These systems were characterized by their physicochemical properties, encapsulation efficiency, in vitro release, storage stability, cytotoxicity, and in vitro biological activity. Both nanocapsules loaded with TIO (average hydrodynamic size of 146.8 ± 0.8 nm, zeta potential of +24.7 ± 1.1 mV) or ECO (average hydrodynamic size of 127.1 ± 1.5 nm, zeta potential of +33.0 ± 1.0 mV) showed excellent association efficiency (99% for TIO and 87% for ECO). The analysis of size, polydispersity index, and zeta potential of the systems at 4, 25, and 37 °C (over a period of two months) showed the stability of the systems. Finally, the developed nanosystems presented fungicidal activity against C. albicans at non-toxic concentrations (studied on model human skin cells). The results obtained from this study are the first step in the development of a pharmaceutical dosage form suitable for the treatment of vaginal candidiasis.

Catechol Oxidase versus Tyrosinase Classification Revisited by Site-Directed Mutagenesis Studies.

Catechol oxidases (COs) and tyrosinases (TYRs) are both polyphenol oxidases (PPOs) that catalyze the oxidation of ortho-diphenols to the corresponding quinones. By the official classification, only TYRs can also catalyze the hydroxylation of monophenols to ortho-diphenols. Researchers have been trying to find the molecular reason for the mono-/diphenolase specificity for decades. However, the hypotheses for the lack of monophenolase activity of plant COs are only based on crystal structures so far. To test these hypotheses, we performed site-directed mutagenesis studies and phylogenetic analyses with dandelion PPOs offering high phylogenetic diversity, the results of which refute the structure-based hypotheses. While plant PPOs of phylogenetic group 2 solely exhibit diphenolase activity, plant PPOs of phylogenetic group 1 unexpectedly also show monophenolase activity. This finding sheds new light upon the molecular basis for mono-/diphenol substrate specificity and challenges the current practice of generally naming plant PPOs as COs.

'Slipped Sandwich' Model for Chitin and Chitosan Perception in Arabidopsis.

Chitin, a linear polymer of N-acetyl-d-glucosamine, and chitosans, fully or partially deacetylated derivatives of chitin, are known to elicit defense reactions in higher plants. We compared the ability of chitin and chitosan oligomers and polymers (chitin oligomers with degree of polymerization [DP] 3 to 8; chitosan oligomers with degree of acetylation [DA] 0 to 35% and DP 3 to 15; chitosan polymers with DA 1 to 60% and DP approximately 1,300) to elicit an oxidative burst indicative of induced defense reactions in Arabidopsis thaliana seedlings. Fully deacetylated chitosans were not able to trigger a response; elicitor activity increased with increasing DA of chitosan polymers. Partially acetylated chitosan oligomers required a minimum DP of 6 and at least four N-acetyl groups to trigger a response. Invariably, elicitation of an oxidative burst required the presence of the chitin receptor AtCERK1. Our results as well as previously published studies on chitin and chitosan perception in plants are best explained by a new general model of LysM-containing receptor complexes in which two partners form a long but off-set chitin-binding groove and are, thus, dimerized by one chitin or chitosan molecule, sharing a central GlcNAc unit with which both LysM domains interact. To verify this model and to distinguish it from earlier models, we assayed elicitor and inhibitor activities of selected partially acetylated chitosan oligomers with fully defined structures. In contrast to the initial 'continuous groove', the original 'sandwich', or the current 'sliding mode' models for the chitin/chitosan receptor, the here-proposed 'slipped sandwich' model-which builds on these earlier models and represents a consensus combination of these-is in agreement with all experimental observations.

A specific amino acid residue in the catalytic site of dandelion polyphenol oxidases acts as 'selector' for substrate specificity.

KEY MESSAGE: Successful site-directed mutagenesis combined with in silico modeling and docking studies for the first time offers experimental proof of the role of the 'substrate selector' residue in plant polyphenol oxidases. The plant and fungi enzymes responsible for tissue browning are called polyphenol oxidases (PPOs). In plants, PPOs often occur as families of isoenzymes which are differentially expressed, but little is known about their physiological roles or natural substrates. In a recent study that explored these structure-function relationships, the eleven known dandelion (Taraxacum officinale) PPOs were shown to separate into two different phylogenetic groups differing in catalytic cavity architecture, kinetic parameters, and substrate range. The same study proposed that the PPOs' substrate specificity is controlled by one specific amino acid residue positioned at the entrance to the catalytic site: whereas group 1 dandelion PPOs possess a hydrophobic isoleucine (I) at position HB2+1, group 2 PPOs exhibit a larger, positively charged arginine (R). However, this suggestion was only based on bioinformatic analyses, not experiments. To experimentally investigate this hypothesis, we converted group 1 ToPPO-2 and group 2 ToPPO-6 into PPO-2-I244R and PPO-6-R254I, respectively, and expressed them in E. coli. By performing detailed kinetic characterization and in silico docking studies, we found that replacing this single amino acid significantly changed the PPO's substrate specificity. Our findings therefore proof the role of the 'substrate selector' in plant PPOs.