Particle-based optical sensing of intracellular ions at the example of calcium - what are the experimental pitfalls?

Colloidal particles with fluorescence read-out are commonly used as sensors for the quantitative determination of ions. Calcium, for example, is a biologically highly relevant ion in signaling, and thus knowledge of its spatio-temporal distribution inside cells would offer important experimental data. However, the use of particle-based intracellular sensors for ion detection is not straightforward. Important associated problems involve delivery and intracellular location of particle-based fluorophores, crosstalk of the fluorescence read-out with pH, and spectral overlap of the emission spectra of different fluorophores. These potential problems are outlined and discussed here with selected experimental examples. Potential solutions are discussed and form a guideline for particle-based intracellular imaging of ions.

Protein oriented ligation on nanoparticles exploiting O6-alkylguanine-DNA transferase (SNAP) genetically encoded fusion.

A bimodular genetic fusion comprising a delivery module (scFv) and a capture module (SNAP) is proposed as a novel strategy for the site-specific covalent conjugation of targeting peptides to nanoparticles. An scFv mutant selective for HER2 tumor antigen is chosen as the targeting ligand. SNAP-scFv is immobilized on magnetofluorescent nanoparticles and its targeting efficiency against HER2-positive cells is assessed by flow cytometry and immunofluorescence.

Light triggered detection of aminophenyl phosphate with a quantum dot based enzyme electrode.

An electrochemical sensor for p-aminophenyl phosphate (pAPP) is reported. It is based on the electrochemical conversion of 4-aminophenol (4AP) at a quantum dot (QD) modified electrode under illumination. Without illumination no electron transfer and thus no oxidation of 4AP can occur. pAPP as substrate is converted by the enzyme alkaline phosphatase (ALP) to generate 4AP as a product. The QDs are coupled via 1,4-benzenedithiol (BDT) linkage to the surface of a gold electrode and thus allow potential-controlled photocurrent generation. The photocurrent is modified by the enzyme reaction providing access to the substrate detection. In order to develop a photobioelectrochemical sensor the enzyme is immobilized on top of the photo-switchable layer of the QDs. Immobilization of ALP is required for the potential possibility of spatially resolved measurements. Geometries with immobilized ALP are compared versus having the ALP in solution. Data indicate that functional immobilization with layer-by-layer assembly is possible. Enzymatic activity of ALP and thus the photocurrent can be described by Michaelis- Menten kinetics. pAPP is detected as proof of principle investigation within the range of 25 µM-1 mM.

A molecular 1 : 2 demultiplexer.

A dual-channel fluorescent compound runs as a 1 : 2 digital demultiplexer (DEMUX) which can drive a single signal (proton) to two different destinations as a fluorescent photonic response; each fluorescent channel can be activated independently by careful selection of the excitation wavelength.

In vivo integrity of polymer-coated gold nanoparticles.

Inorganic nanoparticles are frequently engineered with an organic surface coating to improve their physicochemical properties, and it is well known that their colloidal properties may change upon internalization by cells. While the stability of such nanoparticles is typically assayed in simple in vitro tests, their stability in a mammalian organism remains unknown. Here, we show that firmly grafted polymer shells around gold nanoparticles may degrade when injected into rats. We synthesized monodisperse radioactively labelled gold nanoparticles ((198)Au) and engineered an (111)In-labelled polymer shell around them. Upon intravenous injection into rats, quantitative biodistribution analyses performed independently for (198)Au and (111)In showed partial removal of the polymer shell in vivo. While (198)Au accumulates mostly in the liver, part of the (111)In shows a non-particulate biodistribution similar to intravenous injection of chelated (111)In. Further in vitro studies suggest that degradation of the polymer shell is caused by proteolytic enzymes in the liver. Our results show that even nanoparticles with high colloidal stability can change their physicochemical properties in vivo.

A natural-product-inspired photonic logic gate based on photoinduced electron-transfer-generated dual-channel fluorescence.

[structure: see text] Modified 1-benzylisoquinoline N-oxides can operate as molecular logic gates. The combination of dual-channel fluorescence emissions and the preferred interaction for selected chemical inputs allows one to design multifunction and self-reprogrammable molecular logic gates.

The effect of nanoparticle degradation on amphiphilic polymer-coated quantum dot toxicity: the importance of particle functionality assessment in toxicology [corrected].

Colloidal semiconductor nanoparticles (quantum dots) have attracted a lot of interest in technological and biomedical research, given their potent fluorescent properties. However, the use of heavy-metal-containing nanoparticles remains an issue of debate. The possible toxic effects of quantum dots remain a hot research topic and several questions such as possible intracellular degradation of quantum dots and the effect thereof on both cell viability and particle functionality remain unresolved. In the present work, amphiphilic polymer [corrected] coated CdSe/ZnS quantum dots were synthesized and characterized, after which their effects on cultured cells were evaluated using a multiparametric setup. The data reveal that the quantum dots are taken up through endocytosis and when exposed to the low pH of the endosomal structures, they partially degrade and release cadmium ions, which lowers their fluorescence intensity and augments particle toxicity. Using the multiparametric method, the quantum dots were evaluated at non-toxic doses in terms of their ability to visualize labeled cells for longer time periods. The data revealed that comparing different particles in terms of their applied dose is challenging, likely due to difficulties in obtaining accurate nanoparticle concentrations, but evaluating particle toxicity in terms of their biological functionality enables an easy and straightforward comparison.

Controlled antibody/(bio-) conjugation of inorganic nanoparticles for targeted delivery.

Arguably targeting is one of the biggest problems for controlled drug delivery. In the case that drugs can be directed with high efficiency to the target tissue, side effects of medication are drastically reduced. Colloidal inorganic nanoparticles (NPs) have been proposed and described in the last 10years as new platforms for in vivo delivery. However, though NPs can introduce plentiful functional properties (such as controlled destruction of tissue by local heating or local generation of free radicals), targeting remains an issue of intense research efforts. While passive targeting of NPs has been reported (the so-called enhanced permeation and retention, EPR effect), still improved active targeting would be highly desirable. One classical approach for active targeting is mediated by molecular recognition via capture molecules, i.e. antibodies (Abs) specific for the target. In order to apply this strategy for NPs, they need to be conjugated with Abs against specific biomarkers. Though many approaches have been reported in this direction, the controlled bioconjugation of NPs is still a challenge. In this article the strategies of controlled bioconjugation of NPs will be reviewed giving particular emphasis to the following questions: 1) how can the number of capture molecules per NP be precisely adjusted, and 2) how can the Abs be attached to NP surfaces in an oriented way. Solution of both questions is a cornerstone in controlled targeting of the inorganic NPs bioconjugates.

Polymer-coated nanoparticles interacting with proteins and cells: focusing on the sign of the net charge.

To study charge-dependent interactions of nanoparticles (NPs) with biological media and NP uptake by cells, colloidal gold nanoparticles were modified with amphiphilic polymers to obtain NPs with identical physical properties except for the sign of the charge (negative/positive). This strategy enabled us to solely assess the influence of charge on the interactions of the NPs with proteins and cells, without interference by other effects such as different size and colloidal stability. Our study shows that the number of adsorbed human serum albumin molecules per NP was not influenced by their surface charge. Positively charged NPs were incorporated by cells to a larger extent than negatively charged ones, both in serum-free and serum-containing media. Consequently, with and without protein corona (i.e., in serum-free medium) present, NP internalization depends on the sign of charge. The uptake rate of NPs by cells was higher for positively than for negatively charged NPs. Furthermore, cytotoxicity assays revealed a higher cytotoxicity for positively charged NPs, associated with their enhanced uptake.

Subcellular carrier-based optical ion-selective nanosensors.

In this review, two carrier systems based on nanotechnology for real-time sensing of biologically relevant analytes (ions or other biological molecules) inside cells in a non-invasive way are discussed. One system is based on inorganic nanoparticles with an organic coating, whereas the second system is based on organic microcapsules. The sensor molecules presented within this work use an optical read-out. Due to the different physicochemical properties, both sensors show distinctive geometries that directly affect their internalization patterns. The nanoparticles carry the sensor molecule attached to their surfaces whereas the microcapsules encapsulate the sensor within their cavities. Their different size (nano and micro) enable each sensors to locate in different cellular regions. For example, the nanoparticles are mostly found in endolysosomal compartments but the microcapsules are rather found in phagolysosomal vesicles. Thus, allowing creating a tool of sensors that sense differently. Both sensor systems enable to measure ratiometrically however, only the microcapsules have the unique ability of multiplexing. At the end, an outlook on how more sophisticated sensors can be created by confining the nano-scaled sensors within the microcapsules will be given.

Cytotoxic effects of gold nanoparticles: a multiparametric study.

The in vitro labeling of therapeutic cells with nanoparticles (NPs) is becoming more and more common, but concerns about the possible effects of the NPs on the cultured cells are also increasing. In the present work, we evaluate the effects of poly(methacrylic acid)-coated 4 nm diameter Au NPs on a variety of sensitive and therapeutically interesting cell types (C17.2 neural progenitor cells, human umbilical vein endothelial cells, and PC12 rat pheochromocytoma cells) using a multiparametric approach. Using various NP concentrations and incubation times, we performed a stepwise analysis of the NP effects on cell viability, reactive oxygen species, cell morphology, cytoskeleton architecture, and cell functionality. The data show that higher NP concentrations (200 nM) reduce cell viability mostly through induction of reactive oxygen species, which was significantly induced at concentrations of 50 nM Au NPs or higher. At these concentrations, both actin and tubulin cytoskeleton were deformed and resulted in reduced cell proliferation and cellular differentiation. In terms of cell functionality, the NPs significantly impeded neurite outgrowth of PC12 cells up to 20 nM concentrations. At 10 nM, no significant effects on any cellular parameter could be observed. These data highlight the importance of using multiple assays to cover the broad spectrum of cell-NP interactions and to determine safe NP concentrations and put forward the described protocol as a possible template for future cell-NP interaction studies under comparable and standardized conditions.

Quantitative surface-enhanced Raman scattering ultradetection of atomic inorganic ions: the case of chloride.

Surface-enhanced Raman scattering (SERS) spectroscopy can be used for the determination and quantification of biologically representative atomic ions. In this work, the detection and quantification of chloride is demonstrated by monitoring the vibrational changes occurring at a specific interface (a Cl-sensitive dye) supported on a silver-coated silica microbead. The engineered particles play a key role in the detection, as they offer a stable substrate to support the dye, with a dense collection of SERS hot spots. These results open a new avenue toward the generation of microsensors for fast ultradetection and quantification of relevant ions inside living organisms such as cells. Additionally, the use of discrete particles rather than rough films, or other conventional SERS supports, will also enable a safe remote interrogation of highly toxic sources in environmental problems or biological fluids.

How colloidal nanoparticles could facilitate multiplexed measurements of different analytes with analyte-sensitive organic fluorophores.

Multiplexed measurements of several analytes in parallel using analyte-sensitive organic fluorophores can be hampered by spectral overlap of the different fluorophores. The authors discuss how nanoparticles can help to overcome this problem. First, different organic fluorophores can be separated spatially by confining them to separate containers, each bearing a nanoparticle-based barcode. Second, by coupling different fluorophores to nanoparticles with different fluorescence lifetimes that serve as donors for excitation transfer, the effective fluorescence lifetime of the organic fluorophores as acceptors can be tuned by fluorescence resonance energy transfer (FRET). Thus, the fluorophores can be distinguished by their effective lifetimes. This is an example of how the modification of classical functional materials has already yielded improved and even new functionalities by the integration of nanoparticles with hybrid materials. We outline future opportunities in this area.

Immobilization of quantum dots via conjugated self-assembled monolayers and their application as a light-controlled sensor for the detection of hydrogen peroxide.

A light-addressable gold electrode modified with CdS and FePt or with CdS@FePt nanoparticles via an interfacial dithiol linker layer is presented. XPS measurements reveal that trans-stilbenedithiol provides high-quality self-assembled monolayers compared to benzenedithiol and biphenyldithiol, in case they are formed at elevated temperatures. The CdS nanoparticles in good electrical contact with the electrode allow for current generation under illumination and appropriate polarization. FePt nanoparticles serve as catalytic sites for the reduction of hydrogen peroxide to water. Advantageously, both properties can be combined by the use of hybrid nanoparticles fixed on the electrode by means of the optimized stilbenedithiol layer. This allows a light-controlled analysis of different hydrogen peroxide concentrations.

Reducción indirecta y fijación con placa con invasión mínima de fracturas de tibia en modelo animal: estudio comparativo / Indirect reduction and fixation with plaque with minim invasion of tibial fractures in animal model: comparative study

Se trata de un estudio experimental en modelo animal en el que se realizaron osteosintesis en fracturas cerradas empleando técnica con invasión mínima con placa (MIPO) y se compararon en un grupo control en el que se empleo la técnica convencional de reducción abierta anatómica con placa (RAFI). Se incluyeron veinte conejos machos adultos que se dividieron aleatoramente en dos grupos, en los que se produjeron de la misma manera fracturas diafisiarias de tibia que posteriormente se fijaron con técnica MIPO en diez y RAFI en los diez restantes. En todos los procedimientos se utilizaron placas rectas de 2.7 mm con sus tornillos correspondientes (SYNTHES), siendo los procedimientos realizados por un mismo grupo médico veterinario en todas las ocasiones. A las tres semanas se sacrificaron los conejos y se hizo evaluación histológica de las tibias sometidas a osteosintesis. se realizaron veinte procedimientos y evaluaron en total diecisiete especimenes. Se evaluó el tiempo de consolidación ósea a nivel histológico, encontrandose que en los conejos donde se realizó osteosintesis por técnica de RAFI se tuvo tejido fibrosos en cuatro casos y una mezcla de cartilago y hueso en tres (P<0.001). se tuvieron en cuenta todos los aspectos éticos requeridos por la Sociedad Potectora de Animales para el estudio de técnicas quirúrgicas en animales.