A 17-month longitudinal surface sampling study carried out on public transport vehicles operating in England during the COVID-19 pandemic identified low levels of SARS-CoV-2 RNA contamination.

AIMS: To monitor severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) RNA contamination in vehicles operating in England during the pandemic, to better understand transmission risk of SARS-CoV-2 on public transport. METHODS AND RESULTS: We collected 1314 surface samples between December 2020 and April 2022 on trains and buses managed by five different transport operators. The presence of SARS-CoV-2 RNA was investigated through reverse transcription polymerase chain reaction (RT-PCR). SARS-CoV-2 RNA was found on 197 (15%) of the 1314 surfaces sampled, including seat head rests, handholds, and air extract grilles, but the levels of RNA recovered on those samples (median value of 23.4, interquartile range: 14.3-35.4, N gene copies per extraction) made the presence of infectious virus at the time of sampling extremely unlikely. However, detection rates varied over time with peaks broadly coinciding with times of high community transmission, when it was more likely that people infected with SARS-CoV-2 were travelling on public transport. CONCLUSION: During the pandemic, and as in other public spaces, low levels of SARS-CoV-2 RNA were found on surfaces associated with public transport.

Laboratory Evaluation of a Quaternary Ammonium Compound-Based Antimicrobial Coating Used in Public Transport during the COVID-19 Pandemic.

The virucidal activity of the Zoono Z71 Microbe Shield surface sanitizer and protectant, a quaternary ammonium compound (QAC)-based antimicrobial coating that was used by the United Kingdom rail industry during the COVID-19 pandemic, was evaluated, using the bacteriophage ɸ6 as a surrogate for SARS-CoV-2. Immediately after application and in the absence of interfering substances, the product effectively reduced (>3 log10) the viability of ɸ6 on some materials that are typically used in rail carriages (stainless steel, high-pressure laminate, plastic). If, after the application of the product, these surfaces remained undisturbed, the antimicrobial coating retained its efficacy for at least 28 days. However, efficacy depended on the material being coated. The product provided inconsistent results when applied to glass surfaces and was ineffective (i.e., achieved <3 log10 reduction) when applied to a train arm rest that was made of Terluran 22. Regardless of the material that was coated or the time since application, the presence of organic debris (fetal bovine serum) significantly reduced the viricidal activity of the coating. Wiping the surface with a wetted cloth after the deposition of organic debris was not sufficient to restore efficacy. We conclude that the product is likely to be of limited effectiveness in a busy, multiuser environment, such as public transport. IMPORTANCE This study evaluated the performance of a commercially available antimicrobial coating that was used by the transport industry in the United Kingdom during the COVID-19 pandemic. While the product was effective against ɸ6, the efficacy of the coating depended upon the material to which it was applied. Similarly, and regardless of the surface material, the presence of organic debris severely impaired viricidal activity, and efficacy could not be recovered through wiping (cleaning) the surface. This highlights the importance of including relevant materials and conditions when evaluating antimicrobial coatings in the laboratory. Further efforts are required to identify suitable infection prevention and control practices for the transport industry.

Modeling and experimental study of dispersion and deposition of respiratory emissions with implications for disease transmission.

The ability to model the dispersion of pathogens in exhaled breath is important for characterizing transmission of the SARS-CoV-2 virus and other respiratory pathogens. A Computational Fluid Dynamics (CFD) model of droplet and aerosol emission during exhalations has been developed and for the first time compared directly with experimental data for the dispersion of respiratory and oral bacteria from ten subjects coughing, speaking, and singing in a small unventilated room. The modeled exhalations consist of a warm, humid, gaseous carrier flow and droplets represented by a discrete Lagrangian particle phase which incorporates saliva composition. The simulations and experiments both showed greater deposition of bacteria within 1 m of the subject, and the potential for a substantial number of bacteria to remain airborne, with no clear difference in airborne concentration of small bioaerosols (<10 µm diameter) between 1 and 2 m. The agreement between the model and the experimental data for bacterial deposition directly in front of the subjects was encouraging given the uncertainties in model input parameters and the inherent variability within and between subjects. The ability to predict airborne microbial dispersion and deposition gives confidence in the ability to model the consequences of an exhalation and hence the airborne transmission of respiratory pathogens such as SARS-CoV-2.

A Candida auris Outbreak and Its Control in an Intensive Care Setting.

BACKGROUND: Candida auris is an emerging and multidrug-resistant pathogen. Here we report the epidemiology of a hospital outbreak of C. auris colonization and infection. METHODS: After identification of a cluster of C. auris infections in the neurosciences intensive care unit (ICU) of the Oxford University Hospitals, United Kingdom, we instituted an intensive patient and environmental screening program and package of interventions. Multivariable logistic regression was used to identify predictors of C. auris colonization and infection. Isolates from patients and from the environment were analyzed by whole-genome sequencing. RESULTS: A total of 70 patients were identified as being colonized or infected with C. auris between February 2, 2015, and August 31, 2017; of these patients, 66 (94%) had been admitted to the neurosciences ICU before diagnosis. Invasive C. auris infections developed in 7 patients. When length of stay in the neurosciences ICU and patient vital signs and laboratory results were controlled for, the predictors of C. auris colonization or infection included the use of reusable skin-surface axillary temperature probes (multivariable odds ratio, 6.80; 95% confidence interval [CI], 2.96 to 15.63; P<0.001) and systemic fluconazole exposure (multivariable odds ratio, 10.34; 95% CI, 1.64 to 65.18; P=0.01). C. auris was rarely detected in the general environment. However, it was detected in isolates from reusable equipment, including multiple axillary skin-surface temperature probes. Despite a bundle of infection-control interventions, the incidence of new cases was reduced only after removal of the temperature probes. All outbreak sequences formed a single genetic cluster within the C. auris South African clade. The sequenced isolates from reusable equipment were genetically related to isolates from the patients. CONCLUSIONS: The transmission of C. auris in this hospital outbreak was found to be linked to reusable axillary temperature probes, indicating that this emerging pathogen can persist in the environment and be transmitted in health care settings. (Funded by the National Institute for Health Research Health Protection Research Unit in Healthcare Associated Infections and Antimicrobial Resistance at Oxford University and others.).

Long-Term Exposure to Octenidine in a Simulated Sink Trap Environment Results in Selection of Pseudomonas aeruginosa, Citrobacter, and Enterobacter Isolates with Mutations in Efflux Pump Regulators.

Octenidine-based disinfection products are becoming increasingly popular for infection control of multidrug-resistant (MDR) Gram-negative isolates. When a waste trap was removed from a hospital and allowed to acclimatize in a standard tap rig in our laboratory, it was shown that Klebsiella pneumoniae, Pseudomonas aeruginosa, and Citrobacter and Enterobacter spp. were readily isolated. This study aimed to understand the potential impact of prolonged exposure to low doses of a commercial product containing octenidine on these bacteria. Phenotypic and genotypic analyses showed that P. aeruginosa strains had increased tolerance to octenidine, which was characterized by mutations in the Tet repressor SmvR. Enterobacter species demonstrated increased tolerance to many other cationic biocides, although not octenidine, as well as the antibiotics ciprofloxacin, chloramphenicol, and ceftazidime, through mutations in another Tet repressor, RamR. Citrobacter species with mutations in RamR and MarR were identified following octenidine exposure, and this is linked to development of resistance to ampicillin, piperacillin, and chloramphenicol, as well as an increased MIC for ciprofloxacin. Isolates were able to retain fitness, as characterized by growth, biofilm formation, and virulence in Galleria mellonella, after prolonged contact with octenidine, although there were strain-to-strain differences. These results demonstrate that continued low-level octenidine exposure in a simulated sink trap environment selects for mutations that affect smvR It may also promote microbial adaptation to other cationic biocides and cross-resistance to antibiotics, while not incurring a fitness cost. This suggests that hospital sink traps may act as a reservoir for more biocide-tolerant organisms.IMPORTANCE Multidrug-resistant (MDR) strains of bacteria are a major clinical problem, and several reports have linked outbreaks of MDR bacteria with bacterial populations in hospital sinks. Biocides such as octenidine are used clinically in body washes and other products, such as wound dressings for infection control. Therefore, increased tolerance to these biocides would be detrimental to infection control processes. Here, we exposed bacterial populations originally from hospital sink traps to repeated dosing with an octenidine-containing product over several weeks and observed how particular species adapted. We found mutations in genes related to biocide and antibiotic susceptibility, which resulted in increased tolerance, although this was species dependent. Bacteria that became more tolerant to octenidine also showed no loss of fitness. This shows that prolonged octenidine exposure has the potential to promote microbial adaptation in the environment and that hospital sink traps may act as a reservoir for increased biocide- and antibiotic-tolerant organisms.

Insidious Risk of Severe Mycobacterium chimaera Infection in Cardiac Surgery Patients.

BACKGROUND: An urgent UK investigation was launched to assess risk of invasive Mycobacterium chimaera infection in cardiothoracic surgery and a possible association with cardiopulmonary bypass heater-cooler units following alerts in Switzerland and The Netherlands. METHODS: Parallel investigations were pursued: (1) identification of cardiopulmonary bypass-associated M. chimaera infection through national laboratory and hospital admissions data linkage; (2) cohort study to assess patient risk; (3) microbiological and aerobiological investigations of heater-coolers in situ and under controlled laboratory conditions; and (4) whole-genome sequencing of clinical and environmental isolates. RESULTS: Eighteen probable cases of cardiopulmonary bypass-associated M. chimaera infection were identified; all except one occurred in adults. Patients had undergone valve replacement in 11 hospitals between 2007 and 2015, a median of 19 months prior to onset (range, 3 months to 5 years). Risk to patients increased after 2010 from <0.2 to 1.65 per 10000 person-years in 2013, a 9-fold rise for infections within 2 years of surgery (rate ratio, 9.08 [95% CI, 1.81-87.76]). Endocarditis was the most common presentation (n = 11). To date, 9 patients have died. Investigations identified aerosol release through breaches in heater-cooler tanks. Mycobacterium chimaera and other pathogens were recovered from water and air samples. Phylogenetic analysis found close clustering of strains from probable cases. CONCLUSIONS: We identified low but escalating risk of severe M. chimaera infection associated with heater-coolers with cases in a quarter of cardiothoracic centers. Our investigations strengthen etiological evidence for the role of heater-coolers in transmission and raise the possibility of an ongoing, international point-source outbreak. Active management of heater-coolers and heightened clinical awareness are imperative given the consequences of infection.

Aerosolization of respirable droplets from a domestic spa pool and the use of MS-2 coliphage and Pseudomonas aeruginosa as markers for Legionella pneumophila.

Legionnaires' disease can result when droplets or aerosols containing legionella bacteria are inhaled and deposited in the lungs. A number of outbreaks have been associated with the use of a spa pool where aeration, a high water temperature, and a large and variable organic load make disinfectant levels difficult to maintain. Spa pool ownership is increasing, and the aim of this study, using two surrogate organisms (MS-2 coliphage and Pseudomonas aeruginosa [a natural contaminant]), was to assess the potential risk to domestic users when disinfection fails. A representative "entry level" domestic spa pool was installed in an outdoor courtyard. The manufacturer's instructions for spa pool maintenance were not followed. A cyclone sampler was used to sample the aerosols released from the spa pool with and without activation of the air injection system. Samples were taken at increasing heights and distances from the pool. An aerodynamic particle sizer was used to measure the water droplet size distribution at each sample point. When the air injection system was inactivated, neither surrogate organism was recovered from the air. On activation of the air injection system, the mean mass of droplets within the respirable range (10 cm above the water line) was 36.8 µg cm(-3). This corresponded to a mean air concentration of P. aeruginosa of 350 CFU m(-3). From extrapolation from animal data, the estimated risk of infection from aerosols contaminated with similar concentrations of Legionella pneumophila was 0.76 (males) and 0.65 (females). At 1 m above and/or beyond the pool, the mean aerosol mass decreased to 0.04 µg cm(-3) and corresponded to a 100-fold reduction in mean microbial air concentration. The estimated risk of infection at this distance was negligible.

Biofilm formation in an experimental water distribution system: the contamination of non-touch sensor taps and the implication for healthcare.

Hospital tap water is a recognised source of Pseudomonas aeruginosa. U.K. guidance documents recommend measures to control/minimise the risk of P. aeruginosa in augmented care units but these are based on limited scientific evidence. An experimental water distribution system was designed to investigate colonisation of hospital tap components. P. aeruginosa was injected into 27 individual tap 'assemblies'. Taps were subsequently flushed twice daily and contamination levels monitored over two years. Tap assemblies were systematically dismantled and assessed microbiologically and the effect of removing potentially contaminated components was determined. P. aeruginosa was repeatedly recovered from the tap water at levels above the augmented care alert level. The organism was recovered from all dismantled solenoid valves with colonisation of the ethylene propylene diene monomer (EPDM) diaphragm confirmed by microscopy. Removing the solenoid valves reduced P. aeruginosa counts in the water to below detectable levels. This effect was immediate and sustained, implicating the solenoid diaphragm as the primary contamination source.

The laboratory investigation, management, and infection prevention and control of Candida auris: a narrative review to inform the 2024 national guidance update in England.

The emergent fungal pathogen Candida auris is increasingly recognised as an important cause of healthcare-associated infections globally. It is highly transmissible, adaptable, and persistent, resulting in an organism with significant outbreak potential that risks devastating consequences. Progress in the ability to identify C. auris in clinical specimens is encouraging, but laboratory diagnostic capacity and surveillance systems are lacking in many countries. Intrinsic resistance to commonly used antifungals, combined with the ability to rapidly acquire resistance to therapy, substantially restricts treatment options and novel agents are desperately needed. Despite this, outbreaks can be interrupted, and mortality avoided or minimised, through the application of rigorous infection prevention and control measures with an increasing evidence base. This review provides an update on epidemiology, the impact of the COVID-19 pandemic, risk factors, identification and typing, resistance profiles, treatment, detection of colonisation, and infection prevention and control measures for C. auris. This review has informed a planned 2024 update to the United Kingdom Health Security Agency (UKHSA) guidance on the laboratory investigation, management, and infection prevention and control of Candida auris. A multidisciplinary response is needed to control C. auris transmission in a healthcare setting and should emphasise outbreak preparedness and response, rapid contact tracing and isolation or cohorting of patients and staff, strict hand hygiene and other infection prevention and control measures, dedicated or single-use equipment, appropriate disinfection, and effective communication concerning patient transfers and discharge.

Whole-genome sequencing reveals widespread presence of Staphylococcus capitis NRCS-A clone in neonatal units across the United Kingdom.

OBJECTIVE: Increased incidence of neonatal Staphylococcus capitis bacteraemia in summer 2020, London, raised suspicion of widespread multidrug-resistant clone NRCS-A. We set out to investigate the molecular epidemiology of this clone in neonatal units (NNUs) across the UK. METHODS: We conducted whole-genome sequencing (WGS) on presumptive S. capitis NRCS-A isolates collected from infants admitted to nationwide NNUs and from environmental sampling in two distinct NNUs in 2021. Previously published S. capitis genomes were added for comparison. Genetic clusters of NRCS-A isolates were defined based on core-genome single-nucleotide polymorphisms. RESULTS: We analysed WGS data of 838 S. capitis isolates and identified 750 NRCS-A isolates. We discovered a possible UK-specific NRCS-A lineage consisting of 611 isolates collected between 2005 and 2021. We determined 28 genetic clusters of NRCS-A isolates, which covered all geographical regions in the UK, and isolates of 19 genetic clusters were found in ≥2 regions, suggesting inter-regional spread. Within the NRCS-A clone, strong genetic relatedness was identified between contemporary clinical and incubator-associated fomite isolates and between clinical isolates associated with inter-hospital infant transfer. CONCLUSIONS: This WGS-based study confirms the dispersion of S. capitis NRCS-A clone amongst NNUs across the UK and urges research on improving clinical management of neonatal S. capitis infection.

Use of UV-C radiation to disinfect non-critical patient care items: a laboratory assessment of the Nanoclave Cabinet.

BACKGROUND: The near-patient environment is often heavily contaminated, yet the decontamination of near-patient surfaces and equipment is often poor. The Nanoclave Cabinet produces large amounts of ultraviolet-C (UV-C) radiation (53 W/m2) and is designed to rapidly disinfect individual items of clinical equipment. Controlled laboratory studies were conducted to assess its ability to eradicate a range of potential pathogens including Clostridium difficile spores and Adenovirus from different types of surface. METHODS: Each test surface was inoculated with known levels of vegetative bacteria (10(6) cfu/cm(2)), C. difficile spores (10(2)-10(6) cfu/cm(2)) or Adenovirus (10(9) viral genomes), placed in the Nanoclave Cabinet and exposed for up to 6 minutes to the UV-C light source. Survival of bacterial contaminants was determined via conventional cultivation techniques. Degradation of viral DNA was determined via PCR. Results were compared to the number of colonies or level of DNA recovered from non-exposed control surfaces. Experiments were repeated to incorporate organic soils and to compare the efficacy of the Nanoclave Cabinet to that of antimicrobial wipes. RESULTS: After exposing 8 common non-critical patient care items to two 30-second UV-C irradiation cycles, bacterial numbers on 40 of 51 target sites were consistently reduced to below detectable levels (≥ 4.7 log10 reduction). Bacterial load was reduced but still persisted on other sites. Objects that proved difficult to disinfect using the Nanoclave Cabinet (e.g. blood pressure cuff) were also difficult to disinfect using antimicrobial wipes. The efficacy of the Nanoclave Cabinet was not affected by the presence of organic soils. Clostridium difficile spores were more resistant to UV-C irradiation than vegetative bacteria. However, two 60-second irradiation cycles were sufficient to reduce the number of surface-associated spores from 10(3) cfu/cm(2) to below detectable levels. A 3 log10 reduction in detectable Adenovirus DNA was achieved within 3 minutes; after 6 minutes, viral DNA was undetectable. CONCLUSION: The results of this study suggest that the Nanoclave Cabinet can provide rapid and effective disinfection of some patient-related equipment. However, laboratory studies do not necessarily replicate 'in-use' conditions and further tests are required to assess the usability, acceptability and relative performance of the Nanoclave Cabinet when used in situ.

Bridging Didactic Learning and the Complexity of Practice Through Clinical Immersion: Evaluating the Sexual Assault Nurse Examiner Trainee Experience.

ABSTRACT: In this article, we discuss the development and evaluation of the Vanderbilt Nursing Education Program for Sexual Assault Nurse Examiners (VEP-SANE), a 3-day clinical immersion (CI) program, including the lessons learned and the challenges experienced with the completion of two trainee cohorts. To bridge didactic learning and the complexity of practice, the VEP-SANE team designed an innovative, competency-based CI. Fifteen trainees from Cohort 1 and 19 trainees from Cohort 2 met requirements for CI participation. Trainees in Cohort 1 represented the advanced practice registered nurse specialties of emergency, women's health, and pediatrics. For Cohort 2 recruitment, enrollment was expanded to include family and midwifery advanced practice registered nurse specialties. Trainees were required to complete online training modules before CI participation. Online surveys assessed trainee perceptions about levels of knowledge and confidence related to sexual assault nurse examiner competencies (pre/post CI), each CI session, and the overall CI experience. Separate focused discussions were conducted with trainees and faculty after each CI. Both cohorts rated CI sessions as "excellent" or "very good" over 93% of the time. Perceived levels of knowledge and confidence increased from pre-CI to post-CI for both cohorts. Similar CI strengths were identified across trainees and faculty including speakers, high interactivity, safe environment, reality of cases, and surrogate practice. All trainees indicated readiness for preceptorships and interest in a virtual community of practice. Suggestions included more time for laboratory sessions, documenting photos, and interaction with individuals from the lesbian, gay, bisexual and transgender (LGBT) community and presenters. Future efforts focus on CI conversion to a virtual format because of the impact of COVID-19, increased VEP-SANE community of practice interaction, and expanded engagement with practicing sexual assault nurse examiners.

The impact of enhanced cleaning within the intensive care unit on contamination of the near-patient environment with hospital pathogens: a randomized crossover study in critical care units in two hospitals.

OBJECTIVES: To determine the effect of enhanced cleaning of the near-patient environment on the isolation of hospital pathogens from the bed area and staff hands. DESIGN: Prospective randomized crossover study over the course of 1 yr. SETTING: Intensive care units at two teaching hospitals. PATIENTS: There were 1252 patients staying during enhanced cleaning and 1331 staying during standard cleaning. INTERVENTIONS: In each of six 2-month periods, one unit was randomly selected for additional twice-daily enhanced cleaning of hand contact surfaces. MEASUREMENTS AND MAIN RESULTS: Agar contact samples were taken at five sites around randomly selected bed areas, from staff hands, and from communal sites three times daily for 12 bed days per week. Patients admitted in the year commencing April 2007 were analyzed for hospital-acquired colonization and infection. Over the course of 1152 bed days, 20,736 samples were collected. Detection of environmental methicillin-resistant Staphylococcus aureus per bed-area day was reduced during enhanced cleaning phases from 82 of 561 (14.6%) to 51 of 559 (9.1%) (adjusted odds ratio, 0.59; 95% confidence interval, 0.40-0.86; p = .006). Other targeted pathogens (Acinetobacter baumannii, extended-spectrum ß-lactamase-producing Gram-negative bacteria, vancomycin-resistant enterococci, and Clostridium difficile) were rarely detected. Subgroup analyses showed reduced methicillin-resistant Staphylococcus aureus contamination on doctors' hands during enhanced cleaning (3 of 425; 0.7% vs. 11 of 423; 2.6%; adjusted odds ratio, 0.26; 95% confidence interval, 0.07-0.95; p = .025) and a trend to reduction on nurses' hands (16 of 1647; 1.0% vs. 28 of 1694; 1.7%; adjusted odds ratio 0.56; 95% confidence interval, 0.29-1.08; p = .077). All 1252 critical care patients staying during enhanced and 1,331 during standard cleaning were included, but no significant effect on patient methicillin-resistant Staphylococcus aureus acquisition was observed (adjusted odds ratio, 0.98; 95% confidence interval, 0.58-1.65; p = .93). CONCLUSIONS: Enhanced cleaning reduced environmental contamination and hand carriage, but no significant effect was observed on patient acquisition of methicillin-resistant Staphylococcus aureus. TRIAL REGISTRY: ISRCTN. Identifier: 06298448. http://www.controlled-trials.com/isrctn/.

Increasing human papillomavirus immunization in the primary care setting.

ABSTRACT: Human papillomavirus (HPV) is a leading cause of cancer. Increasing HPV vaccination recommendations by primary care providers to patients decreases the burden of this viral infection. Providers need to be educated about this condition and the available options for immunization to feel confident in making strong recommendations and thereby increase HPV immunization rates.

Migration of Escherichia coli and Klebsiella pneumoniae Carbapenemase (KPC)-Producing Enterobacter cloacae through Wastewater Pipework and Establishment in Hospital Sink Waste Traps in a Laboratory Model System.

Sink waste traps and drains are a reservoir for multi-drug resistant Gram-negative bacteria in the hospital environment. It has been suggested that these bacteria can migrate through hospital plumbing. Hospital waste traps were installed in a laboratory model system where sinks were connected through a common wastewater pipe. Enterobacterales populations were monitored using selective culture, MALDI-TOF identification and antibiotic resistance profiling before and after a wastewater backflow event. When transfer between sinks was suspected, isolates were compared using whole-genome sequencing. Immediately after the wastewater backflow, two KPC-producing Enterobacter cloacae were recovered from a waste trap in which Carbapenemase-producing Enterobacterales (CPE) had not been detected previously. The isolates belonged to ST501 and ST31 and were genetically indistinguishable to those colonising sinks elsewhere in the system. Following inter-sink transfer, KPC-producing E. cloacae ST501 successfully integrated into the microbiome of the recipient sink and was detected in the waste trap water at least five months after the backflow event. Seven weeks and three months after the backflow, other inter-sink transfers involving Escherichia coli ST5295 and KPC-producing E. cloacae ST501 were also observed.

Contamination of Air and Surfaces in Workplaces with SARS-CoV-2 Virus: A Systematic Review.

OBJECTIVES: This systematic review aimed to evaluate the evidence for air and surface contamination of workplace environments with SARS-CoV-2 RNA and the quality of the methods used to identify actions necessary to improve the quality of the data. METHODS: We searched Web of Science and Google Scholar until 24 December 2020 for relevant articles and extracted data on methodology and results. RESULTS: The vast majority of data come from healthcare settings, with typically around 6% of samples having detectable concentrations of SARS-CoV-2 RNA and almost none of the samples collected had viable virus. There were a wide variety of methods used to measure airborne virus, although surface sampling was generally undertaken using nylon flocked swabs. Overall, the quality of the measurements was poor. Only a small number of studies reported the airborne concentration of SARS-CoV-2 virus RNA, mostly just reporting the detectable concentration values without reference to the detection limit. Imputing the geometric mean air concentration assuming the limit of detection was the lowest reported value, suggests typical concentrations in healthcare settings may be around 0.01 SARS-CoV-2 virus RNA copies m-3. Data on surface virus loading per unit area were mostly unavailable. CONCLUSIONS: The reliability of the reported data is uncertain. The methods used for measuring SARS-CoV-2 and other respiratory viruses in work environments should be standardized to facilitate more consistent interpretation of contamination and to help reliably estimate worker exposure.

Environmental sampling for SARS-CoV-2 in long term care facilities: lessons from a pilot study.

Background: The SARS-CoV-2 pandemic has highlighted the risk of infection in long-term care facilities (LTCF) and the vulnerability of residents to severe outcomes. Environmental surveillance may help detect pathogens early and inform Infection Prevention and Control (IPC) measures in these settings. Methods: Upon notification of SARS-CoV-2 outbreaks, LTCF within a local authority in South West England were approached to take part in this pilot study. Investigators visited to swab common touch-points and elevated 'non-touch' surfaces (>1.5m above ground level) and samples were analysed for presence of SARS-CoV-2 genetic material (RNA). Data were collected regarding LTCF infrastructure, staff behaviours, clinical and epidemiological risk factors for infection (staff and residents), and IPC measures. Criteria for success were: recruitment of three LTCF; detection of SARS-COV-2 RNA; variation in proportion of SARS-CoV-2 positive surfaces by sampling zone; and collection of clinical and epidemiological data for context. Results: Three LTCFs were recruited, ranging in size and resident demographics. Outbreaks lasted 63, 50 and 30 days with resident attack rates of 53%, 40% and 8%, respectively. The proportion of sample sites on which SARS-CoV-2 was detected was highest in rooms occupied by infected residents and varied elsewhere in the LTCF, with low levels in a facility implementing enhanced IPC measures. The heterogeneity of settings and difficulty obtaining data made it unfeasible to assess association between environmental contamination and infection. A greater proportion of elevated surfaces tested positive for SARS-CoV-2 RNA than common touch-points. Conclusions: SARS-CoV-2 RNA can be detected in a variety of LTCF outbreak settings, both on common-touch items and in elevated sites out of reach. This suggests that further work is justified, to assess feasibility and utility of environmental sampling for infection surveillance in LTCF.

Antimicrobial surfaces for use on inhabited space craft: A review.

Biodegradation of materials on crewed spacecraft can cause disruption, loss of function and lost crew time. Cleaning of surfaces is only partially effective due in accessibility and resource concerns. Commonly affected surfaces are hand-touch sites, waste disposal systems and liquid-handling systems, including condensing heat exchangers. The use of materials on and within such affected systems that reduce the attachment of and degradation by microbes, is an innovative solution to this problem. This review aims to examine both terrestrial and space-based experiments that have aimed to reduce microbial growth which are applicable to the unique conditions of crewed spacecraft. Traditional antimicrobial surfaces such as copper and silver, as well as nanoparticles, long-chain organic molecules and surface topographical features, as well as novel "smart" technologies are discussed. Future missions to cis-lunar and Martian destinations will depend on materials that retain their function and reliability for their success; thus, the use of antimicrobial and antifouling materials is a pivotal one.

Recovery and transfer of Salmonella typhimurium from four different domestic food contact surfaces.

Domestic food contact surfaces can play an important role in the transmission of foodborne disease, yet debate continues as to which surface materials pose the greatest risk to consumer health in terms of cross-contamination during food preparation. Salmonella Typhimurium was inoculated onto stainless steel, Formica, polypropylene, or wooden surfaces (25 cm2) in the presence or absence of protein (tryptic soy broth supplemented with 5% horse serum) and held at room temperature. The pathogen was recovered from the test surfaces immediately after inoculation (T=0) and every hour for up to 6 h, by a conventional microbiological sampling technique and by direct transfer onto a model ready-to-eat food (cucumber slices). On all surfaces, pathogen numbers declined during the 6-h holding period, with the most rapid reductions occurring within the first hour. The presence of protein significantly increased (P < 0.05) the number of bacteria recovered from all surface types. However, regardless of application medium or holding time, the number of bacteria recovered from Formica (in all cases) and stainless steel (in most cases) was significantly higher than were the numbers on polypropylene or wood. Similarly, regardless of application medium or holding time, significantly higher bacterial numbers were transferred to the model food from Formica or stainless steel than from polypropylene or wooden surfaces. These differences were greater when the bacteria were applied in a protein-rich medium and the test surfaces held for 1 h or more. The results of this study emphasize that differences, both in recoverability and in the number of bacteria transferred to the model food rather than simply reflecting differences in pathogen survival, may also reflect differences in the ability of the test bacteria to remobilize from the different surface types. However, the results also demonstrate a fundamental problem when choosing food contact surfaces, i.e., that those characteristics that make a surface "easy to clean" may also render it more likely to release contaminating pathogens during common food preparation practices.