Biological parameters, discolouration and radiopacity of calcium silicate-based materials in a simulated model of partial pulpotomy.

AIM: To analyse the discolouration, radiopacity, pH and calcium ion release of Biodentine (BD), Bio-C repair (BCR) and Bio-C temp (BCT), as well as their biological effects on human dental pulp cells (hDPCs). METHODOLOGY: Sixty-four extracted bovine incisors were prepared to simulate crown fractures with pulp exposure and open root apex. The roots were filled using a mixture of agar and blood (control), and BD, BCR or BCT were placed over this mixture. Colour assessment analyses of the samples were performed before and immediately after material insertion and repeated at 30 and 90 days, using a spectrophotometer. The colour change of each specimen was evaluated at the crown and calculated based on the CIELab colour space. Digital radiographs were acquired for radiopacity analysis. hDPCs were placed in contact with different dilutions of culture media previously exposed to such materials and tested for cell viability using the MTT assay. The pH and calcium ion release of all materials were measured after 24 h; the data were assessed using one-way analysis of variance (ANOVA). Cell viability was analysed by two-way ANOVA. Differences in colour parameters and wound-healing data were assessed by two-way repeated measures ANOVA (α = 0.05). Tukey's and Dunnett's tests were used to compare the experimental groups with the control group. RESULTS: BCR had grater radiopacity and smaller colour alteration (ΔEab/ΔE00) than the other materials tested (p < .005; p < .001). No significant differences in pH were found amongst the tested materials (p > .05). BCT was associated with the largest release of calcium ions (p < .0001). BD had cell viability similar to that of the control at the lowest dilutions, and BCR was similar to that of the control, regardless of the dilution tested (p > .05). BCT had a lower percentage of viability than that of the control at all tested dilutions (p < .0001). Cell migration rates in BD and BCR were similar to those in the control group after 24 h and 48 h (p > .05), whilst BCT had larger voids than the control in both periods (p < .0001). CONCLUSIONS: BCR, BCT and BD were associated with tooth discolouration. BCR had the lowest staining values, the highest radiopacity and viability greater than 80% hDPCs.

Influence of glide path kinematics during endodontic treatment on the occurrence and intensity of intraoperative and postoperative pain: a systematic review of randomized clinical trials.

BACKGROUND: Preliminary canal enlargement (glide path preparation) may play a significant role in the development of pain. The aim of this systematic review of randomized clinical trials was to assess the influence of glide path kinematics during endodontic treatment on the occurrence and intensity of intraoperative and postoperative pain. METHODS: A search was performed in June 2019 in six electronic databases (PubMed, Scopus, LILACS, SciELO, Embase and Web of Science) and two grey literature databases (OpenGrey and OpenThesis). The bibliographic references of the eligible articles were also hand-searched. The included clinical studies assessed the occurrence and intensity of intraoperative and/or postoperative pain after root canal preparation without glide path preparation (WGP) or with glide path preparation using manual (M-GP), continuous rotary (CR-GP), or reciprocating (R-GP) instruments. The primary outcome was the occurrence and intensity of intraoperative and postoperative pain, while analgesic consumption was the secondary outcome. The full texts of the eligible studies were analyzed by two reviewers who performed calibration exercises to verify the risk of bias and quality of the individual studies using the Joanna Briggs Institute Critical Appraisal tool. RESULTS: From 1283 identified articles, only six studies were included in the qualitative analysis of the results, with a total sample of 884 patients/teeth. Three studies presented a high risk of bias, while three studies presented a moderate risk. Two studies reported that CR-GP causes lower pain levels than M-GP and WGP, and three studies showed no differences between CR-GP and R-GP. Regarding analgesic consumption, two studies found no differences among glide path kinematics, and one study reported lower consumption for CR-GP than for M-GP. Because of the limited number of studies and methodological differences, no statistical analyses were performed for the glide path kinematics comparisons. CONCLUSIONS: Compelling evidence indicating a significantly different occurrence and intensity of pain among glide path kinematics is lacking. The systematic review protocol was registered in the PROSPERO database [CRD42020139989].

Effect of titanium surface functionalization with bioactive glass on osseointegration: An experimental study in dogs.

PURPOSE: The purpose of this study was to evaluate the effect of surface functionalization with bioactive glass BSF18 on the osseointegration of sandblasted and dual acid-etched surface (AE) implants. METHODS AND MATERIALS: Forty Morse taper implants with an AE surface as controls (C) or with an AE surface functionalized with BSF18 (BF) were placed in the mandibles of 10 beagles. Implants were analyzed after 2 and 4 weeks of healing. Implant stability quotient (ISQ) values were registered immediately after installation and prior to sacrifice. Samples were analyzed for bone-to-implant contact (BIC) and bone density (BD). The characterization of BF implants included surface roughness analysis with atomic force microscopy and contact angle (CA) analysis to evaluate wettability. Data were analyzed using two-way ANOVA followed by Tukey's test (p < 0.05). RESULTS: Surface roughness was not affected by BF treatment. CA was lower in the BF group compared to the C group. No significant difference was observed in ISQ values between surfaces (p = 0,231), irrespective of time. Significantly higher ISQ values were observed for both implants after 4 weeks when compared with baseline (p = 0.04). Significantly higher BIC (p = 0.011) and BD (p = 0.025) values were observed for the BF compared to the C group at 2 weeks. Significantly higher BIC (p = 0.030) and BD (p = 0.015) values for the C group were observed at 4 weeks compared to 2 weeks. No significant difference was observed in the BF group between 2 and 4 weeks. CONCLUSIONS: Implant functionalization with BSF18 improved the wettability of the implant surface; enhancing BIC and BD at 2 weeks.

Replanted teeth stored in a newly developed powdered coconut water formula.

BACKGROUND/AIM: A newly developed powdered coconut water formulae (ACP-404) has been proposed to preserve periodontal ligament cell viability. The aim of this study was to investigate the periodontal healing of dog teeth replanted after storage in ACP-404 with 2 different osmolalities. MATERIALS AND METHODS: Sixty teeth of 10 adult beagle dogs were extracted and randomly subjected to the following protocols: immediate replantation after extraction (positive control); dry conditions (negative control); and storage in ACP-404 I (G1), ACP-404 II (G2), in coconut water long shelf life (G3) or in pH-neutralized coconut water long shelf life (G4) for 50 minutes before replantation. The animals were euthanized 28 days post-operatively and processed for histomorphometric analysis using an optical microscope. The groups were subjected to histomorphometric analysis compared with immediate replantation and dry conditions. The data were statistically analysed using the Kruskal-Wallis test with post-analysis using Dunnett's test. RESULTS: The normal periodontal area was significantly higher for the G1 than for the G2 and G3 groups (P < .001). The positive control group presented similar normal periodontal areas compared to the experimental groups, except for the G3 and negative control groups (P < .001). G1 presented the lowest level of external root replacement resorption compared to the other groups (P < .05). All storage solutions had similar periodontal conditions for repaired resorption areas, inflammatory root resorption, ankylosis and replacement resorption (P > .05). CONCLUSIONS: ACP-404 I (G1) was better overall and was able to preserve the normal periodontium and had less external root replacement resorption.

Histomorphometric evaluation of a dual acid-etched vs. a chemically modified hydrophilic dual acid-etched implant surface. An experimental study in dogs.

OBJECTIVE: The aim of this preclinical in vivo study was to compare histologically and histomorphometrically osseointegration of dual acid-etched vs. hydrophilic implants. MATERIAL AND METHODS: Two pairs of implants (Neodent, Curitiba, Brazil), with same macrogeometry but different surface technology (i) dual acid-etched surface (SAE) treatment with hydrochloric and sulfuric acid followed by microwave treatment and insertion in isotonic saline solution to increase hydrophilicity (SAE-HD) (test, n = 12); (ii) dual SAE (control, n = 12) were installed bilaterally in the proximal tibia of six beagle dogs. Histologic and histomorphometric evaluation was performed after 2 and 4 weeks in vivo, on non-decalcified sections. Percentages of bone-to-implant contact (BIC) and bone density (BD) were estimated and tested for significant differences with the Wilcoxon signed-rank test for paired samples (P < 0.05). RESULTS: In general, new bone formation along and in contact with the implant surface could be observed irrespective of the experimental group and observation period. Most of the bone was woven but small quantities of lamellar bone, mainly in close proximity to the cortex could also be observed. BIC at 2 weeks was 19.57 ± 13.57 and 20.33 ± 7.99 (P = 0.75), and at 4 weeks was 42.80 ± 14.48 and 40.25 ± 9.45 (P = 0.65) for SAE-HD and SAE implants respectively. BD at 2 weeks was 24.85 ± 16.31 and 25.66 ± 8.59 (P = 0.35) and at 4 weeks 44.13 ± 6.46 and 40.13 ± 6.46 (P = 0.25) for SAE-HD and SAE implants respectively. CONCLUSION: Bone-to-implant contact and BD increased with time in both SAE-HD and SAE implants. No significant differences were observed between the two different implant surfaces for any of the evaluated parameters and at any observation time-point.

Effect of indomethacin on surface treatment and intracanal dressing of replanted teeth in dogs.

PURPOSE: This study evaluated the healing process of teeth replanted after root treatment and intracanal dressing with indomethacin alone or indomethacin with calcium hydroxide (Ca[OH]2). MATERIALS AND METHODS: Through a case-control study, 24 teeth of 6 adult dogs were extracted, dried, and divided into 4 groups according to the root surface treatment protocols performed before replantation and the intracanal medication used after replantation. In group 1 (negative control), root surfaces were treated by immersion in a 0.9% saline solution and then replanted. In the other groups, the roots were immersed for 10 minutes in Ca(OH)2 (group 2), indomethacin (group 3), or a solution of indomethacin and Ca(OH)2 (group 4). After 2 weeks, group 1 teeth were subjected to single-visit root canal treatment and obturation with gutta-percha and sealer consisting of zinc oxide and eugenol. The teeth in the other groups were subjected to intracanal dressing with the same material used for immersion. After an additional period of 28 weeks, the animals were euthanized and the jaws containing the replanted teeth were processed for histologic analysis. Histometric values were statistically analyzed, with significance set at a P value less than or equal to .05. RESULTS: Group 1 exhibited significantly more normal periodontium than group 4 (P = .02). Total resorption was greater in group 4 than in group 1 (P = .02). No statistically significant difference in the percentage of surface resorption or in total inactive resorption was observed between the groups. CONCLUSIONS: The findings of this study suggest that intracanal dressing and topical root treatment with Ca(OH)2 with or without indomethacin is not recommended for teeth dried for 50 minutes, but the use of indomethacin alone as root surface treatment for delayed tooth replantation deserves further study using longer drying periods. In addition, the present results suggest that a single-visit root canal, performed up to 2 weeks after replantation, might be indicated for teeth dried for up to 50 minutes.

Modulation of osteoclastogenesis by macrogeometrically designed hydrophilic dual acid-etched titanium surfaces.

The aim of this study was to evaluate the influence of implant macrodesign and surface hydrophilicity on osteoclast (OC) differentiation, activation, and survival in vitro. Titanium disks were produced with a sandblasted, dual acid-etched surface, with or without additional chemical modification for increasing hydrophilicity (SAE-HD and SAE, respectively) and different macrodesign comprising trapezoidal (HLX) or triangular threads (TMX). This study evaluated 7 groups in total, 4 of which were experimental: HLX/SAE-HD, HLX-SAE, TMX/SAE-HD, and TMX/SAE; and 3 control groups comprising OC differentiated on polystyrene plates (CCPC): a positive CCPC (+), a negative CCPC (-), and a lipopolysaccharide-stimulated assay positive control group, CCPC-LPS. Murine macrophage RAW264.7 cells were seeded on the disks, differentiated to OC (RAW-OC) by receptor activator of nuclear factor-κB ligand (RANKL) treatment and cultured for 5 days. Osteoclast differentiation and cell viability were respectively assessed by specific enzymatic Tartrate-Resistant Acid Phosphatase (TRAP) activity and MTT assays. Expression levels of various OC-related genes were measured at the mRNA level by quantitative polymerase chain reaction (qPCR). HLX/SAE-HD, TMX/SAE-HD, and HLX/SAE significantly suppressed OC differentiation when compared to CCPC (+). Cell viability was significantly increased in TMX/SAE and reduced in HLX/SAE-HD. In addition, the expression of Interleukin (IL)-6 and Tumour Necrosis Factor (TNF)-α was upregulated in TMX/SAE-HD compared to CCPC (+). Hydrophilic surfaces negatively modulate macrophage/osteoclast viability. Specifically, SAE-HD with double triangular threads increases the cellular pro-inflammatory status, while surface hydrophilicity and macrodesign do not seem to have a distinct impact on osteoclast differentiation, activation, or survival.

Would nitric oxide be an effective marker for earlier stages of peri-implant disease? An analysis in human peri-implant sulcular fluid.

Nitric oxide has an important effect on host immune response. However, little has been studied in relation to its potential as a possible diagnostic tool in peri-implant disease. The present study analyzed nitrite levels in the peri-implant sulcular fluid (PISF) of implants with mucositis and the correlation of these nitrite levels with clinical parameters using a simplified fluid collection methodology. Twenty-five partially edentulous patients showing peri-implant mucositis were evaluated, and the peri-implant status was determined based on current clinical parameters: probing depth (PD) and bleeding on probing (BOP). The sulcular fluid (SF) around teeth (control) and implants were collected, and the nitrite levels were evaluated using the Griess method. The mean probing depth (mm) was significantly higher (P < .0001) in implants (2.852 ± 0.6484) than in control teeth (1.585 ± 0.3636). The mean total nitrite level (µM) was statistically higher (P = .0069) in implants with mucositis (14.34 ± 11.83) than in control teeth (9.316 ± 5.534). No correlation was observed between the total nitrite levels and the PD mean in the control group (P = .2558, r = -0.2361) or in the implant group (P = .1160, r = -0.3224), as well as the number of faces showing bleeding on probing (P = .8747, r = 0.0332). These results demonstrated that the nitrite levels were higher in inflamed areas. According to the methodology applied and results obtained, the higher nitrite levels in inflamed areas suggest that, in the future, nitrite could be used as a marker of peri-implant mucositis associated with clinical data to monitor the cure or evolution of the disease.

Evaluation of Cytotoxicity, Cell Attachment, and Elemental Characterization of Three Calcium Silicate-Based Sealers.

We investigated three calcium silicate-based sealers with respect to their chemical characterization, cytotoxicity, and attachment to RAW264.7 cells. BioRoot RCS (BR), Bio-C Sealer (BC), and Sealer Plus BC (SPBC) were assessed using Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence spectroscopy (XRF), and energy-dispersive X-ray spectroscopy (EDX) (n = 4) for elemental characterization, and using scanning electron microscopy (SEM) to evaluate cell morphology and adhesion. Cytotoxicity was determined at different dilutions (1:1, 1:2, and 1:5) using the succinate dehydrogenase activity (MTT assay). Statistical analysis was performed for normal distribution using the Shapiro-Wilk test and for homoscedasticity using Levene's test, and one-way ANOVA, Tukey's/Dunnett's post hoc tests for cell viability and XRF (α = 0.05). Calcium silicate hydrate and calcium hydroxide were detected by FTIR in all groups. EDX detected a higher calcium content for BR and SPBC and aluminum only in the premixed sealers. XRF detected the highest calcium release in BR (p < 0.05). The surface morphology showed irregular precipitates for all the sealers. SPBC at a 1:2 dilution resulted in the lowest cell viability compared to BR (p < 0.05) and BC (p < 0.05). The calcium silicate-based sealers produced a statistically significant reduction in cellular viability at a 1:1 dilution compared to the control group (p < 0.0001). All the sealers maintained viability above 70%.

Effects of different calcium-silicate based materials on fracture resistance of immature permanent teeth with replacement root resorption and osteoclastogenesis.

Objectives: This study evaluated the effects of Biodentine (BD), Bio-C Repair (BCR), and mineral trioxide aggregate (MTA) plug on the fracture resistance of simulated immature teeth with replacement root resorption (RRR) and in vitro-induced osteoclastogenesis. Materials and Methods: Sixty bovine incisors simulating immature teeth and RRR were divided into 5 groups: BD and BCR groups, with samples completely filled with the respective materials; MTA group, which utilized a 3-mm apical MTA plug; RRR group, which received no root canal filling; and normal periodontal ligament (PL) group, which had no RRR and no root canal filling. All the teeth underwent cycling loading, and compression strength testing was performed using a universal testing machine. RAW 264.7 macrophages were treated with 1:16 extracts of BD, BCR, and MTA containing receptor activator of nuclear factor-kappa B ligand (RANKL) for 5 days. RANKL-induced osteoclast differentiation was assessed by staining with tartrate-resistant acid phosphatase. The fracture load and osteoclast number were analyzed using 1-way ANOVA and Tukey's test (α = 0.05). Results: No significant difference in fracture resistance was observed among the groups (p > 0.05). All materials similarly inhibited osteoclastogenesis (p > 0.05), except for BCR, which led to a lower percentage of osteoclasts than did MTA (p < 0.0001). Conclusions: The treatment options for non-vital immature teeth with RRR did not strengthen the teeth and promoted a similar resistance to fractures in all cases. BD, MTA, and BCR showed inhibitory effects on osteoclast differentiation, with BCR yielding improved results compared to the other materials.

Physicochemical properties and osteoclastogenesis for three premixed calcium silicate-based sealers post set.

Solubility, pH, ion release, cytotoxicity, and osteoclastogenesis inhibition in bone marrow-derived monocyte macrophages (BMMs) were evaluated in EndoSequence BC Sealer (END), Bio-C Sealer (BC), and Sealer Plus BC (SPBC). pH was determined after immersion of the sealers in deionized water (DW) and Minimum Essential Medium Alpha (α-MEM). Solubility was obtained by mass loss. Ion release was measured by using X-ray fluorescence spectroscopy (XRF). Cytotoxicity was evaluated by MTT assay. Inhibition of osteoclastogenesis was evaluated by tartrate-resistant acid phosphatase (TRAP). Data were analyzed using the t-test, ANOVA and Tukey/Dunnett's post-hoc tests (α = 0.05). END had the highest pH in DW (p < 0.05), and BC, in α-MEM (p < 0.05). Solubility in DW was the lowest for SPBC (p < 0.005). The highest calcium release was observed for BC in DW at 12 h (p < 0.05), and in α-MEM at 12 and 24 h (p < 0.05). The lowest toxicity was detected for END (p < 0.05). BC had the highest inhibitory effect on osteoclasts (p < 0.05). Overall, the highest solubility and pH values were found in DW. However, the calcium silicate-based sealer showed higher solubility than the ISO standards. Calcium release was the highest for BC. END showed the highest cell viability, and BC, the highest osteoclast inhibition.

Use of platelet-rich fibrin for bone repair: a systematic review and meta-analysis of preclinical studies.

This systematic review evaluated the potential utility of platelet-rich fibrin (PRF) in bone repair in animals. The question is: can the use of PRF in bone defects in healthy rats induce bone repair compared to clot? This systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (Prisma). The protocol was registered with Prospero (CRD [42020162319]). The literature search involved nine databases, including grey literature. All studies evaluated the bone defects created in rats filled with PRF and clots (control). Biomaterial evaluation was also performed in this study. The risk of bias was assessed using the Systematic Review Center for Laboratory Animal Experimentation (Syrcle) tool for animal studies. A meta-analysis of quantitative data was performed to estimate the effect of PRF on bone repair in rats. Heterogeneity among the studies was assessed using the I2 statistic. The literature search retrieved 685 studies, 10 of which fulfilled the eligibility criteria, and 4 were included in the quantitative assessment. Analysis of the risk of bias revealed that most studies had a high risk of bias in performance and detection. Meta-analysis yielded divergent results and the absence of a statistically significant effect: PRF with control (standardized mean difference 2.54, 95% confidence interval -0.80-5.89; p = 0.14). In general, study heterogeneity was high (I2 ≥ 75.0%). The quality of the studies that influenced the conclusion of the review was based on the PICO, the sources and form of the search, the study selection criteria, the form of evaluation of publication bias, the evaluation of the quality of the studies, and data extraction by two researchers. PRF did not provide significant benefits for bone repair, resulting in unpredictable effects.

Calcium-doped zinc oxide nanocrystals as an innovative intracanal medicament: a pilot study.

Objectives: This study investigated the cytotoxicity, radiopacity, pH, and dentinal tubule penetration of a paste of 1.0% calcium-doped zinc oxide nanocrystals (ZnO:1.0Ca) combined with propylene glycol (PRG) or polyethylene glycol and propylene glycol (PEG-PRG). Materials and Methods: The pastes were prepared by mixing calcium hydroxide [Ca(OH)2] or ZnO:1.0Ca with PRG or a PEG-PRG mixture. The pH was evaluated after 24 and 96 hours of storage in deionized water. Digital radiographs were acquired for radiopacity analysis and bubble counting of each material. The materials were labeled with 0.1% fluorescein and applied to root canals, and images of their dentinal tubule penetration were obtained using confocal laser scanning microscopy. RAW264.7 macrophages were placed in different dilutions of culture media previously exposed to the materials for 24 and 96 hours and tested for cell viability using the MTT assay. Analysis of variance and the Tukey test (α = 0.05) were performed. Results: ZnO:1.0Ca materials showed lower viability at 1:1 and 1:2 dilutions than Ca(OH)2 materials (p < 0.0001). Ca(OH)2 had higher pH values than ZnO:1.0Ca at 24 and 96 hours, regardless of the vehicle (p < 0.05). ZnO:1.0Ca pastes showed higher radiopacity than Ca(OH)2 pastes (p < 0.01). No between-material differences were found in bubble counting (p = 0.0902). The ZnO:1.0Ca pastes had a greater penetration depth than Ca(OH)2 in the apical third (p < 0.0001). Conclusions: ZnO:1.0Ca medicaments presented higher penetrability, cell viability, and radiopacity than Ca(OH)2. Higher values of cell viability and pH were present in Ca(OH)2 than in ZnO:1.0Ca.

Ozone disinfection for viruses with applications in healthcare environments: a scoping review.

The aim of this scoping review was to provide sufficient information about the effectiveness of ozone gas in virus inactivation of surfaces and objects under different environmental conditions. The review was performed according to the list of PRISMA SrC recommendations and the JBI Manual for Evidence Synthesis for Scoping Reviews. The review was registered in Open Science Framework (OSF). EMBASE (Ovid), Lilacs, LIVIVO, MEDLINE (PubMed), SciELO, Scopus and Web of Science were primary sources, and "gray literature" was searched in OpenGray and OpenThesis. A study was included if it reported primary data on the effect of ozone gas application for vehicle-borne and airborne virus inactivation. No language or publication date restriction was applied. The search was conduct on July 1, 2020. A total of 16,120 studies were screened, and after exclusion of noneligible studies, fifteen studies fulfilled all selection criteria. Application of ozone gas varied in terms of concentration, ozone exposure period and the devices used to generate ozone gas. Twelve studies showed positive results for inactivation of different virus types, including bacteriophages, SARS-CoV-2 surrogates and other vehicle-borne viruses. Most of the studies were classified as unclear regarding sponsorship status. Although most of the population has not yet been vaccinated against COVID-19, disinfection of environments, surfaces, and objects is an essential prevention strategy to control the spread of this disease. The results of this Scoping Review demonstrate that ozone gas is promising for viral disinfection of surfaces.

Antibacterial activity of Brazilian red propolis and in vitro evaluation of free radical production.

OBJECTIVE: This study aimed to evaluate the antibacterial activity of crude Brazilian red propolis (BRP) extract against anaerobic bacteria involved in primary endodontic infection. Additionally, we evaluate the cell viability and free radical production of human dental pulp fibroblasts (HDPF) in direct contact with mineral trioxide aggregate (MTA) and BRP. DESIGN: The Minimum Inhibitory Concentration, Minimum Bactericidal Concentration (MIC, MBC) and Minimum Inhibitory Concentration of Biofilm (MICB50) of BRP against anaerobic endodontic pathogens were determined. HDPF were exposed to BRP10 (10 µg/mL), BRP50 (50 µg/mL), MTA extract (1:1, 1:2, 1:4 e 1:8), dimethyl sulfoxide 0.5% (DMSO), and cell culture medium (DMEM). The groups were tested for cell viability (MTT assay), and free radical production (reactive oxygen species - ROS, DCFH-DA probe and nitric oxide - NO, Griess reagent). The one-way ANOVA and Tukey's tests were employed at a significance level of 5%. RESULTS: MIC/MBC values of BRP performed antibacterial activity for Parvimonas micra (6.25/6.25 µg/mL), Fusobacterium nucleatum (25/25 µg/mL), Prevotella melaninogenica (50/100 µg/mL), Prevotella nigrescens (50/100 µg/mL), Prevotella intermedia (50/100 µg/mL), and Porphyromonas gingivalis (50/200 µg/mL). The MICB50 values ranged from 1.56 to 50 µg/mL. BRP and MTA stimulated cell viability, emphasizing BRP10 (p = 0.007). Furthermore, it was observed that MTA 1:1, MTA 1:2, and BRP50 slightly increased ROS (p < 0.001) and NO production (p = 0.008, p = 0.007, and p < 0.001 respectively) compared to DMEM group. CONCLUSIONS: BRP exhibits good antibacterial activity against endodontic pathogens, and both BRP and MTA promote the viability of HDPF without increasing NO and ROS production.

Influence of chelating solutions on tubular dentin sealer penetration: A systematic review with network meta-analysis.

This systematic review assessed the influence of conventional final irrigation with chelating solutions (CS) on tubular dentin sealer penetration (TDSP). The literature search was conducted in eight electronic databases using MeSH, DeCS, EMTREE and free terms. The study protocol followed the PRISMA guidelines and was registered on the PROSPERO database (CRD42020203080). Twelve studies were included, and a qualitative synthesis and network meta-analysis of the data were performed. The risk of bias of the studies was assessed using an adaptation of the JBI Critical Appraisal tool. QMix was the solution with the highest probability of having the highest percentage of TDSP in the apical (34.1%), middle (86.5%) and coronal (97.7%) thirds. Eleven studies presented a moderate risk of bias, whereas one study presented a high risk of bias. In conclusion, CS improves sealer penetration into the dentinal tubules with QMix demonstrating superior results.

Cytotoxicity and dentin composition alterations promoted by different chemomechanical caries removal agents: A preliminary in vitro study.

BACKGROUND: The use of chemomechanical agents for caries removal has been indicated as a non-invasive treatment option; however, their possible deleterious effects on the dental-pulp complex have been insufficiently studied. This study assessed the direct cytotoxicity of two chemomechanical caries removal agents (Brix 3000™ - BX and Papacarie Duo™ - PD) on pulp cells from deciduous teeth, as well as to assess the morphology and chemical compositions of the dentin surface after the application of these materials. MATERIAL AND METHODS: The cells were seeded (50,000 cells/cm²) in a culture medium (DMEM with 10% fetal bovine serum - FBS). After 24 hours, the BX and PD materials were added to 1:20, 1:100, and 1:1000 dilutions. Non-exposed cells were considered as the control group. The viability test (MTT), Trypan Blue assay (TB), and cell morphology (Scanning Electron Microscopy - SEM) were performed after 24 hours of agent application. For the SEM and chemical (energy-dispersive X-ray spectrometry - EDS) dentin evaluation, 0.3-mm-thick dentin discs were obtained and divided into control group (no treatment) and surfaces covered with 37% phosphoric acid, BX, or PD. Data were compared by one-way ANOVA and Tukey's test (p<0.05). RESULTS: Decreases in cell viability and numbers of viable cells were observed for both materials, at all dilutions, when compared with the control group (p<0.05). The BX and PD materials did not cause visually perceptible changes, according to SEM, on the surfaces of dentin discs. The EDS analysis did not indicate a statistically significant difference in the levels of calcium (Ca) and phosphorus (P) between the materials and the control group (p>0.05). CONCLUSIONS: Both materials showed cytotoxicity when in direct contact with the pulp cells from deciduous teeth, and the BX material presented lower cytotoxicity than the PD material. Moreover, both materials did not significantly change the dentin composition. Key words:Cell culture, cytotoxicity, dental pulp, papacarie, primary teeth.

Effect of irrigation protocols on root canal wall after post preparation: a micro-CT and microhardness study.

The aim of this study was to investigate the effects of different post space irrigation protocols for removing residual filling material from dentin walls, by using microcomputed tomography (micro-CT), and the influence of these protocols on dentin microhardness. Bovine incisors (n = 35) were filled with the single-cone technique and MTA Fillapex (Angelus, Londrina, PR, Brazil). Post space preparation (PSP) was performed 7 days after filling, using the Odous Touch electrical system (Odous De Deus Ind. e Com., Belo Horizonte, MG, Brazil), followed by post space irrigation using manual irrigation, passive ultrasonic irrigation, or Easy Clean, together with 2.5% sodium hypochlorite (NaOCl), or with 2.5% NaOCl and 17% EDTA (NaOCl/EDTA). Micro-CT scans were performed at three time points. The residual filling material was evaluated at three levels: cervical, middle and apical. The Knoop test was measured with four indentations around the canal lumen at three dentin depths: X (100 µm), Y (200 µm) and Z (400 µm). Statistical analysis was performed using ANOVA (p < 0.05). The effects of the activation method (p < 0.001), and the root level (p = 0.013), as well as the interaction between the irrigant and the activation method (p = 0.041), led to different percentages of residual filling material. Lower amounts of residual filling material were observed at the cervical versus the middle and apical levels (p < 0.05). No significant differences were observed in dentin microhardness (p > 0.05). The best removal of the residual filling material was performed using the Easy Clean tip and NaOCl/EDTA, regardless of the activation methods.

Cytotoxicity and Effects of a New Cacium Hydroxide Nanoparticle Material on Production of Reactive Oxygen Species by LPS-Stimulated Dental Pulp Cells.

Introduction: The aim of this study was to synthesize and characterize calcium hydroxide (CH) nanoparticles [CH-NP] and compare the cytotoxicity of these materials with that of mineral trioxide aggregate (White MTA) in human dental pulp mesenchymal cells (hDPMCs) stimulated by lipopolysaccharide (LPS). Methods and Materials: The CH-NP were synthesized by the co-precipitation method, and the physical properties were investigated through X-ray diffraction, scanning electron microscopy (SEM) and energy dispersive x-ray spectrometry (EDS). LPS-stimulated hDPMCs were placed in contact with different dilutions of culture media previously exposed to CH-NP and white MTA for 24 h. The groups were tested for cell viability by MTT formazan and Alamar Blue assays, the production of nitric oxide (NO) by Griess method and the production of reactive oxygen species (ROS) by means of the fluorescent oxidant-sensing probe 2',7'-dichlorodihydrofluorescein diacetate (DCFH-DA). Control groups for viability test were maintained in DMEM (not LPS-stimulated). For NO and ROS production, negative control group was cells in DMEM, and positive control was cells stimulated by LPS. The results were statistically analyzed by two-way ANOVA, Tukey's test and Dunnett's test (ɑ=0.05). Results: The results showed that the cell viability remained above 50% in all materials, independent of the dilution in MTT formazan and Alamar Blue tests. MTA showed a reduction in NO production at dilutions of 1:4 to 1:32 compared with the positive control group (P<0.05). The tested materials exhibited lower ROS production by DPMCs than that by cells in the positive control group (P<0.05), and similar ROS production to the negative control group (P>0.05). Conclusion: The outcomes of present in vitro study showed that MTA and [CH-NP] were not cytotoxic materials, with MTA closer to the results of control group (DMEM). MTA and [CH-NP] reduced ROS production at basal levels, with MTA inhibiting NO production at higher dilutions.

The effect of 17% EDTA and QMiX ultrasonic activation on smear layer removal and sealer penetration: ex vivo study.

This study aimed to compare the effect of conventional irrigation (CI) and passive ultrasonic irrigation (PUI) with 17% EDTA and QMiX on the maximum depth and percentage of sealer penetration into the dentinal tubules by confocal laser scanning microscopy (CLSM) and to describe the cleaning of root canal walls by scanning electron microscopy (SEM). Eighty single-rooted human mandibular premolars were instrumented and randomly assigned to four groups (n = 20): EDTA + CI, QMiX + CI, EDTA + PUI, and QMiX + PUI. Ten samples from each group were examined by SEM (2,000×) and the remaining 40 roots were filled with a single gutta-percha cone and AH Plus sealer mixed with 0.1% rhodamine B for analysis by CLSM (10×). Images were assessed at distances of 2 mm (apical), 5 mm (middle), and 8 mm (coronal) from the apex with the Leica Application Suite V4.10 software. The EDTA + PUI and QMiX + PUI protocols presented higher rates of debris/smear layer removal in the apical and middle thirds. The PUI was superior to CI in the maximum depth of sealer penetration at the middle third. The QMiX + PUI group had a higher percentage of sealer penetration at the apical third. The PUI and QMiX protocol improved debris/smear layer removal and tubular dentin sealer penetration.