Ni(II)-Salophen-Comprehensive Analysis on Electrochemical and Spectral Characterization and Biological Studies.

New aspects of the Ni(II)-salophen complex and salophen ligand precursor were found during deep electrochemical and optical characterization, as well as biological studies for new pharmacological applications. Physicochemical and spectroscopic methods (1H- and 13C-NMR, FT-IR and UV-Vis, electrospray ionization mass spectroscopy, thermogravimetric analysis, and molar conductance measurements) were also used to prove that the salophen ligand acts as a tetradentate and coordinates to the central metal through nitrogen and oxygen atoms. The electrochemical behavior of the free Schiff salophen ligand (H2L) and its Ni(II) complex (Ni(II)L) was deeply studied in tetrabutylammonium perchlorate solutions in acetonitrile via CV, DPV, and RDE. Blue films on the surfaces of the electrodes as a result of the electropolymerization processes were put in evidence and characterized via CV and DPV. (H2L) and Ni(II)L complexes were tested for their antimicrobial, antifungal, and antioxidant activity, showing good antimicrobial and antifungal activity against several bacteria and fungi.

Heterocyclic Bismuth(III) Dithiocarbamato Complexes as Single-Source Precursors for the Synthesis of Anisotropic Bi2 S3 Nanoparticles.

New complexes catena-(µ2 -nitrato-O,O')bis(piperidinedithiocarbamato)bismuth(III) (1) and tetrakis(µ-nitrato)tetrakis[bis(tetrahydroquinolinedithiocarbamato)bismuth(III)] (2) were synthesised and characterised by elemental analysis, FTIR spectroscopy and thermogravimetric analysis. The single-crystal X-ray structures of 1 and 2 were determined. The coordination numbers of the Bi(III) ion are 8 for 1 and ≥6 for 2 when the experimental electron density for the nominal 6s(2) lone pair of electrons is included. Both complexes were used as single-source precursors for the synthesis of dodecylamine-, hexadecylamine-, oleylamine and tri-n-octylphosphine oxide-capped Bi2 S3 nanoparticles at different temperatures. UV/Vis spectra showed a blueshift in the absorbance band edge characteristic of a quantum size effect. High-quality, crystalline, long and short Bi2 S3 nanorods were obtained depending on the thermolysis temperature, which was varied from 190 to 270 °C. A general trend of increasing particle breadth with increasing reaction temperature and increasing length of the carbon chain of the amine (capping agent) was observed. Powder XRD patterns revealed the orthorhombic crystal structure of Bi2 S3 .

Synthesis and biological activity of ferrocenyl indeno[1,2-c]isoquinolines as topoisomerase II inhibitors.

Three series of indeno[1,2-c]isoquinolines bearing a ferrocenyl entity were synthesized and evaluated for DNA interaction, topoisomerase I and II inhibition, and cytotoxicity against breast human cancer cell lines. In the first and second series, the ferrocenyl scaffold was inserted as a linker between the two nitrogen atoms. In the last series, it was introduced at the end of the carbon chain. The present study showed that the ferrocenyl entity enhanced the topoisomerase II inhibition. Most compounds showed a potent growth inhibitory effect on MDA-MB-231 cell line with the IC50 in µM range.

Portrait of a UK-Africa Capacity Building Initiative Consortium 2015-2022: the Cameroon, Ghana, South Africa and United Kingdom Materials Initiative (CaGSUMI) for developing materials for solar cells.

The CaGSUMI consortium was funded by the Royal Society-Department for International Development (later the Foreign, Commonwealth & Development Office) on the Africa Capacity Building Initiative programme between the years 2015 and 2022 and involved three Sub-Saharan African universities: Kwame Nkrumah University of Science and Technology, Kumasi, Ghana, University of Yaoundé I, Cameroon, and the University of Zululand, South Africa; and the University of Manchester in the United Kingdom. The project was used to cement an emergent UK-Africa network in the areas of materials chemistry related to renewable energy generation with both thin films and nanomaterials. The consortium's outputs led to numerous publications of African science in international journals, a number of graduated PhDs who went on to permanent academic positions and prestigious fellowships, the establishment of a capacity-building plan relevant to the chemistry departments in each of the African countries, and the installation of a number of first-in-kind pieces of kit for African laboratories that will keep them on a competitive footing at an international level for the next decade and more.

Thiourea-Derived Single-Source Molecular Precursor For Spin-Coated PbS Thin Films.

In search of a suitable single-source precursor for the deposition of nanostructured PbS thin films at moderate temperatures under ambient conditions, we have synthesized the ligand N-(thiomorpholine-4-carbothioyl)benzamide and its corresponding lead(II) complex. The structures of both compounds were determined by single-crystal X-ray diffraction. In the complex, two ligands coordinate to a lead(II) atom in hemi-directed geometry through S and O atoms. Secondary intermolecular Pb⋅⋅⋅S interactions group the complexes into pairs. As bulk powders, both the ligand and complex show nominal composition and purity as evidenced by elemental analysis, 1 H NMR and IR spectroscopy. Thermal analysis of the lead(II) complex was carried out to understand its thermal decomposition behaviour for establishing a thin film fabrication protocol. Thin films of phase-pure PbS were fabricated using this new molecular precursor at the comparatively low annealing temperature of 250 °C. The film showed nanoparticles with cuboidal morphology and a blue-shifted optical absorption.

Comparative study on the effect of precursors on the morphology and electronic properties of CdS nanoparticles.

Cadmium dithiocarbamate and cadmium ethyl xanthate complexes were synthesized and characterized by microanalysis, Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric analyses. The complexes were employed as molecular precursors for the fabrication of CdS nanoparticles in hexadecylamine (HDA) and oleylamine (OLA) at a temperature of 250 °C. Spherical and oval shaped particles with sizes ranging from 9.93 ± 1.89 to 16.74 ± 2.78 nm were obtained in OLA while spherical, oval and rod shaped particles with sizes ranging from 9.40 ± 1.65 to 29.90 ± 5.32 nm were obtained in HDA. Optical properties of the nanoparticles showed blue shifts as compared to the bulk CdS, with the OLA capped nanoparticles slightly more blue shifted than the corresponding HDA capped nanoparticles. Results of crystallinity patterns revealed hexagonal phase of CdS.

Synthesis of (Bi1-x Sb x )2S3 solid solutions via thermal decomposition of bismuth and antimony piperidinedithiocarbamates.

The synthesis of the complete range of (Bi1-x Sb x )2S3 solid solutions, where 0 ≤ x ≤ 1, by the variation of the mole ratio of bismuth and antimony piperidine dithiocarbamate complexes is reported. There was a near linear expansion of a and c lattice parameters as the mole ratio of the antimony precursor was increased. The composition of the particles directionally followed the amount of precursor ratio used. When the composition of particles was compared to cell parameters, a slight deviation from Vegard's law was observed with a corresponding contraction of the b parameter and an approximately 3.5% reduction of the lattice volume. The nanorods obtained showed aspect ratios that depend on the composition of the material. The Bi and Sb rich materials had high aspect ratios of 16.58 and 16.58 respectively with a minimum aspect ratio of 2.58 observed for x = 0.50.

Synthesis of anisotropic PbS nanoparticles using heterocyclic dithiocarbamate complexes.

We report the synthesis of lead piperidine and lead tetrahydroquinoline dithiocarbamate (DTC) complexes and their use as single source precursors for the preparation of anisotropic PbS nanoparticles. The complexes were thermolysed in coordinating solvents such hexadecylamime (HDA), tri-n-octylphosphine oxide (TOPO), oleylamine (OA) and decylamine (DA) at various reaction temperatures. The variation of the reaction conditions and precursors produced PbS particles with shapes ranging from spheres to cubes and rods. The size of the particles is generally larger than those synthesized by conventional precursor routes. The electron microscopy and X-ray diffraction data confirm the particles to be very crystalline with the dominant cubic rock salt phase present in all samples.