Fiber-integrated spectroscopy device for hot alkali vapor.

We introduce an all-glass, vacuum tight, fiber-integrated and alkali compatible spectroscopy device consisting of two conventional optical fibers spliced to each end of a capillary. This is mainly realized through a decentered splicing method allowing refilling of the capillary and controlling the vapor density inside. We analyze the light guidance of the setup through simulations and measurements of the transmission efficiency at different wavelengths and show that filling it with highly reactive alkali metals is possible, and that the vapor density can be controlled reliably.

Ultrafast thin-disk multipass laser amplifier delivering 1.4 kW (4.7 mJ, 1030 nm) average power converted to 820 W at 515 nm and 234 W at 343 nm.

We report on an Yb:YAG thin-disk multipass laser amplifier delivering sub-8 ps pulses at a wavelength of 1030 nm with 1420 W of average output power and 4.7 mJ of pulse energy. The amplifier is seeded by a regenerative amplifier delivering 6.5 ps pulses with 300 kHz of repetition rate and an average power of 115 W. The optical efficiency of the multipass amplifier was measured to be 48% and the beam quality factor was better than M2 = 1.4. Furthermore we report on the external second harmonic generation from 1030 nm to 515 nm using an LBO crystal leading to an output power of 820 W with 2.7 mJ of energy per pulse. This corresponds to a conversion efficiency of 70%. Additionally, 234 W of average power were obtained at the third harmonic with a wavelength of 343 nm.

Radially polarized emission with 635 W of average power and 2.1 mJ of pulse energy generated by an ultrafast thin-disk multipass amplifier.

We report on a thin-disk multipass amplifier delivering radially polarized laser pulses with an average power of 635 W and 2.1 mJ of pulse energy. To the best of our knowledge, this is the highest average output power and pulse energy reported so far for radially polarized ultrafast lasers. The amplifier is seeded by a TruMicro5050 with 115 W of average output power, 6.5 ps pulse duration, and a repetition rate of 300 kHz. A segmented half-waveplate was used for converting the linearly polarized beam into radial polarization in front of the amplifier. We present a scheme for direct amplification of such doughnut-shaped radially-polarized beams, the results obtained, and a solution to compensate for the depolarizing phase shift introduced by the tilted mirrors in the amplifier.

1.1 kW average output power from a thin-disk multipass amplifier for ultrashort laser pulses.

We report on a thin-disk multipass amplifier for ultrashort laser pulses delivering an average output power of 1105 W. The amplifier was seeded by a Trumpf TruMicro5050 laser with a power of 80 W at a wavelength of 1030 nm, pulse duration of 6.5 ps, and repetition rate of 800 kHz. The energy of the amplified pulses is 1.38 mJ with a duration of 7.3 ps. The amplifier exhibits an optical efficiency of 44% and a slope efficiency of 46%. The beam quality was measured to be better than M²=1.25.