A Broadened Class of Donor-Acceptor Stacked Macrometallacyclic Adducts of Different Coinage Metals.

A yet-outstanding supramolecular chemistry challenge is isolation of novel varieties of stacked complexes with finely-tuned donor-acceptor bonding and optoelectronic properties, as herein reported for binary adducts comprising two different cyclic trinuclear complexes (CTC@CTC'). Most previous attempts focused only on 1-2 factors among metal/ligand/substituent combinations, resulting in heterobimetallic complexes. Instead, here we show that, when all 3 factors are carefully considered, a broadened variety of CTC@CTC' stacked pairs with intuitively-enhanced intertrimer coordinate-covalent bonding strength and ligand-ligand/metal-ligand dispersion are attained (dM-M' 2.868(2) Å; ΔE>50 kcal/mol, an order of magnitude higher than aurophilic/metallophilic interactions). Significantly, CTC@CTC' pairs remain intact/strongly-bound even in solution (Keq 4.67×105 L/mol via NMR/UV-vis titrations), and the gas phase (mass spectrometry revealing molecular peaks for the entire CTC@CTC' units in sublimed samples), rather than simple co-crystal formation. Photo-/electro-luminescence studies unravel metal-centered phosphorescence useful for novel all metal-organic light-emitting diodes (MOLEDs) optoelectronic device concepts. This work manifests systematic design of supramolecular bonding and multi-faceted spectral properties of pure metal-organic macrometallacyclic donor/acceptor (inorganic/inorganic) stacks with remarkably-rich optoelectronic properties akin to well-established organic/organic and organic/inorganic analogues.

A Copper-Based Metal-Organic Framework for Selective Separation of C2 Hydrocarbons from Methane at Ambient Conditions: Experiment and Simulation.

C2 hydrocarbon separation from methane represents a technological challenge for natural gas upgrading. Herein, we report a new metal-organic framework, [Cu2L(DEF)2]·2DEF (UNT-14; H4L = 4,4',4″,4‴-((1E,1'E,1″E,1‴E)-benzene-1,2,4,5-tetrayltetrakis(ethene-2,1-diyl))tetrabenzoic acid; DEF = N,N-diethylformamide; UNT = University of North Texas). The linker design will potentially increase the surface area and adsorption energy owing to π(hydrocarbon)-π(linker)/M interactions, hence increasing C2 hydrocarbon/CH4 separation. Crystallographic data unravel an sql topology for UNT-14, whereby [Cu2(COO)4]···[L]4- paddle-wheel units afford two-dimensional porous sheets. Activated UNT-14a exhibits moderate porosity with an experimental Brunauer-Emmett-Teller (BET) surface area of 480 m2 g-1 (vs 1868 m2 g-1 from the crystallographic data). UNT-14a exhibits considerable C2 uptake capacity under ambient conditions vs CH4. GCMC simulations reveal higher isosteric heats of adsorption (Qst) and Henry's coefficients (KH) for UNT-14a vs related literature MOFs. Ideal adsorbed solution theory yields favorable adsorption selectivity of UNT-14a for equimolar C2Hn/CH4 gas mixtures, attaining 31.1, 11.9, and 14.8 for equimolar mixtures of C2H6/CH4, C2H4/CH4, and C2H2/CH4, respectively, manifesting efficient C2 hydrocarbon/CH4 separation. The highest C2 uptake and Qst being for ethane are also desirable technologically; it is attributed to the greatest number of "agostic" or other dispersion C-H bond interactions (6) vs 4/2/4 for ethylene/acetylene/methane.

Naphthodithiophene-Fused Porphyrins: Synthesis, Characterization, and Impact of Extended Conjugation on Aromaticity.

The fusion of tetrapyrroles with aromatic heterocycles constitutes a useful tool for manipulating their opto-electronic properties. In this work, the synthesis of naphthodithiophene-fused porphyrins was achieved through a Heck reaction-based cascade of steps followed by the Scholl reaction. The naphthodithiophene-fused porphyrins display a unique set of optical and electronic properties. Fusion of the naphtho[2,1-b:3,4-b']dithiophene to porphyrin (F2VTP) leads to a ~20% increase in the fluorescence lifetime, which is accompanied, unexpectedly, by a more than two-fold drop in the emission quantum yield (ϕ=0.018). In contrast, fusion of the isomeric naphtho[1,2-b:4,3-b']dithiophene to porphyrin (F3VPT) results in a ~1.5-fold increase in the fluorescence quantum yield (ϕ=0.13) with a concomitant ~30 % increase in the fluorescence lifetime. This behavior suggests that fusion of the porphyrin with the naphthodithiopheno-system mainly affects the radiative rate constant in the Q-state deactivation pathway, where the effects of the isomeric naphtho[2,1-b:3,4-b']dithiophene- versus naphtho[1,2-b:4,3-b']dithiophene-fusion are essentially the opposite. Interestingly, nucleus-independent chemical shifts analysis revealed a considerable difference between the aromaticities of these two isomeric systems. Our results demonstrate that subtle structural differences in the fused components of the porphyrin can be reflected in rather significant differences between the photophysical properties of the resulting systems.

Fluorinated Antimony(V) Tetraarylporphyrins as High-Valent Electron Acceptors with Unparalleled Reduction Potentials.

A series of fluorinated antimony(V) porphyrins, SbTPP(OMe)2·PF6, SbTPP(OTFE)2·PF6, SbT(4F)PP(OMe)2·PF6, SbT(35F)PP(OMe)2·PF6, SbT(345F)PP(OMe)2·PF6, SbT(4CF3)PP(OMe)2·PF6, SbT(35CF3)PP(OMe)2·PF6, and SbT(35CF3)PP(OTFE)2·PF6, have been synthesized with phenyl [P], 4-fluorophenyl [(4F)P], 3,5-difluorophenyl [(35F)P], 3,4,5-difluorophenyl [(345F)P], 4-trifluoromethylphenyl [(4CF3)P], and 3,5-bis(trifluoromethyl)phenyl [(35CF3)P], in the meso-positions. Additionally, the SbTPP(OTFE)2·PF6 and SbT(35CF3)PP(OTFE)2·PF6 carry trifluoroethoxy units in their axial-positions. The fluorination on the porphyrin peripherals ranges from zero fluorine atoms in SbTPP(OMe)2·PF6 to 30 fluorine atoms in SbT(35CF3)PP(OTFE)2·PF6. X-ray crystallography confirmed the structures of the investigated antimony(V) porphyrins. The absorption spectra depend on the number of fluorine atoms as it is blue-shifted with increasing fluorination. The series also exhibited rich redox chemistry with two reduction processes and one oxidation process. Remarkably, these porphyrins manifested the lowest reduction potentials reported among the main-group porphyrins, which are as low as -0.08 V vs SCE for SbT(35CF3)PP(OTFE)2·PF6. On the contrary, the oxidation potentials were found to be very large, that is equal to 2.20 V vs SCE or even higher for SbT(4CF3)PP(OMe)2·PF6 or SbT(35CF3)PP(OMe)2·PF6 and SbT(35CF3)PP(OTFE)2·PF6, respectively. These unprecedented potentials are due to a combination of two factors: (i) the +5-oxidation state of antimony in the porphyrin cavity and (ii) the presence of the strong electron-withdrawing fluorine atoms on the porphyrin peripherals. Density functional theory (DFT) calculations were used to support the experimental results. The systematic study of antimony(V) porphyrins, especially their high potentials, make them ideal for the construction of photoelectrodes and excellent electron acceptors for photoelectrochemical cells and artificial photosynthetic systems, respectively, for solar energy conversion and storage applications.

Asymmetric Synthesis of Chromans Through Bifunctional Enamine-Metal Lewis Acid Catalysis.

Cooperative enamine-metal Lewis acid catalysis has emerged as a powerful tool to construct carbon-carbon and carbon-heteroatom bond forming reactions. A concise synthetic method for asymmetric synthesis of chromans from cyclohexanones and salicylaldehydes has been developed to afford tricyclic chromans containing three consecutive stereogenic centers in good yields (up to 87 %) and stereoselectivity (up to 99 % ee and 11 : 1 : 1 dr). This difficult organic transformation was achieved through bifunctional enamine-metal Lewis acid catalysis. It is believed that the strong activation of the salicylaldehydes through chelating to the metal Lewis acid and the bifunctional nature of the catalyst accounts for the high yields and enantioselectivity of the reaction. The absolute configurations of the chroman products were established through X-ray crystallography. DFT calculations were conducted to understand the mechanism and stereoselectivity of this reaction.

Hypervalent Phosphorus(V) Porphyrins with meso-Methoxyphenyl Substituents: Significance of the Number and Position of Methoxy Groups in Promoting Intramolecular Charge Transfer.

To study the photophysical and redox properties as a function of meso-aryl units, a series of hypervalent phosphorus(V) porphyrins, PP(OMe)2·PF6, PMP(OMe)2·PF6, PDMP(OMe)2·PF6, P345TMP(OMe)2·PF6, and P246TMP(OMe)2·PF6, with phenyl (P), 4-methoxyphenyl (MP), 3,5-dimethoxyphenyl (DMP), 3,4,5-trimethoxyphenyl (345TMP), and 2,4,6-trimethoxyphenyl (246TMP) units, respectively, have been synthesized. The P(+5) in the cavity makes the porphyrin ring electron-poor, whereas the methoxy groups make the meso-phenyl rings electron-rich. The presence of electron-rich and electron-poor portions within the porphyrin molecule promoted an intramolecular charge transfer (ICT). Also, the study suggests that the ICT depends on the number and position of the methoxy groups. The ICT is more prominent in m-methoxy-substituted phosphorus(V) porphyrins (PDMP(OMe)2.PF6, P345TMP(OMe)2·PF6) and almost no ICT was found in no-methoxy, o-methoxy, and/or p-methoxy phosphorus(V) porphyrins (PP(OMe)2·PF6, PMP(OMe)2·PF6, P246TMP(OMe)2·PF6). Transient absorption studies indicate that the ICT takes place on the picosecond time scale. The most striking results come from P246TMP(OMe)2·PF6, where each phenyl ring carries three methoxy units, like the P345TMP(OMe)2·PF6, but it failed to induce the ICT process. Electrochemical studies and time-dependent density functional theory (TD-DFT) calculations were used to support the experimental results. This study extensively explores why and how slight variations in meso-aryl substitutions lead to intricate changes in the photophysical and redox properties of phosphorus(V) porphyrins.

Can Primary Arylamines Form Enamine? Evidence, α-Enaminone, and [3+3] Cycloaddition Reaction.

The formation of enamine from primary arylamines was detected and confirmed by nuclear magnetic resonance spectroscopy. The presence of a radical quencher, e.g., (2,2,6,6-tetramethylpiperidin-1-yl)oxidanyl, was found to be essential for the detection of enamine formation. A direct synthesis of α-enaminones from primary arylamines and ketones was also developed. Mechanistic investigation of α-enaminone formation suggests that an amine radical cation generated through O2 singlet energy transfer was involved in initiating α-enaminone formation. The reactivity and utility of α-enaminones were explored with a [3+3] cycloaddition reaction of enones affording dihydropyridines in good yields (58-85%). α-Enaminones displayed a set of reactivities that is different from that of enamines. The knowledge gained in this work advances our basic understanding of organic chemistry, providing insights and new opportunities in enamine catalysis.

Cupriphication of gold to sensitize d10-d10 metal-metal bonds and near-unity phosphorescence quantum yields.

Outer-shell s0/p0 orbital mixing with d10 orbitals and symmetry reduction upon cupriphication of cyclic trinuclear trigonal-planar gold(I) complexes are found to sensitize ground-state Cu(I)-Au(I) covalent bonds and near-unity phosphorescence quantum yields. Heterobimetallic Au4Cu2 {[Au4(µ-C2,N3-EtIm)4Cu2(µ-3,5-(CF3)2Pz)2], (4a)}, Au2Cu {[Au2(µ-C2,N3-BzIm)2Cu(µ-3,5-(CF3)2Pz)], (1) and [Au2(µ-C2,N3-MeIm)2Cu(µ-3,5-(CF3)2Pz)], (3a)}, AuCu2 {[Au(µ-C2,N3-MeIm)Cu2(µ-3,5-(CF3)2Pz)2], (3b) and [Au(µ-C2,N3-EtIm)Cu2(µ-3,5-(CF3)2Pz)2], (4b)} and stacked Au3/Cu3 {[Au(µ-C2,N3-BzIm)]3[Cu(µ-3,5-(CF3)2Pz)]3, (2)} form upon reacting Au3 {[Au(µ-C2,N3-(N-R)Im)]3 ((N-R)Im = imidazolate; R = benzyl/methyl/ethyl = BzIm/MeIm/EtIm)} with Cu3 {[Cu(µ-3,5-(CF3)2Pz)]3 (3,5-(CF3)2Pz = 3,5-bis(trifluoromethyl)pyrazolate)}. The crystal structures of 1 and 3a reveal stair-step infinite chains whereby adjacent dimer-of-trimer units are noncovalently packed via two Au(I)⋯Cu(I) metallophilic interactions, whereas 4a exhibits a hexanuclear cluster structure wherein two monomer-of-trimer units are linked by a genuine d10-d10 polar-covalent bond with ligand-unassisted Cu(I)-Au(I) distances of 2.8750(8) Å each-the shortest such an intermolecular distance ever reported between any two d10 centers so as to deem it a "metal-metal bond" vis-à-vis "metallophilic interaction." Density-functional calculations estimate 35-43 kcal/mol binding energy, akin to typical M-M single-bond energies. Congruently, FTIR spectra of 4a show multiple far-IR bands within 65-200 cm-1, assignable to vCu-Au as validated by both the Harvey-Gray method of crystallographic-distance-to-force-constant correlation and dispersive density functional theory computations. Notably, the heterobimetallic complexes herein exhibit photophysical properties that are favorable to those for their homometallic congeners, due to threefold-to-twofold symmetry reduction, resulting in cuprophilic sensitization in extinction coefficient and solid-state photoluminescence quantum yields approaching unity (ΦPL = 0.90-0.97 vs. 0-0.83 for Au3 and Cu3 precursors), which bodes well for potential future utilization in inorganic and/or organic LED applications.

Nickel(II) Bisporphyrin-Fused Pentacenes Exhibiting Abnormal High Stability.

A series of largely π-extended multichromophoric molecules including cross-conjugated, half cross-conjugated, conjugation-interrupted and linearly conjugated systems were synthesized and characterized. These multichromophoric molecular systems revealed interesting structural-property relationships. Bisporphyrin-fused pentacenes Pen-1 b and Pen-2 a showed rich redox chemistry with 7 and 8 observable redox states, respectively. The linearly-conjugated bisporphyrin-fused pentacenes (Pen-1 b and Pen-2 a) possess much narrower HOMO-LUMO gaps (1.65 and 1.42 eV redox, respectively) and higher HOMO energy levels than those of their pentacene analogues (2.23 and 2.01 eV redox, respectively), similar to those of much less stable hexacenes and heptacenes. An estimated half-life of >945 h was obtained for bisporphyrin-fused pentacene Pen-2 a, which is much longer than that of its pentacene analogue (BPE-P, half-life, 33 h).

Binary Donor-Acceptor Adducts of Tetrathiafulvalene Donors with Cyclic Trimetallic Monovalent Coinage Metal Acceptors.

Reactions between the π-acidic cyclic trimetallic coinage metal(I) complexes {[Cu(µ-3,5-(CF3)2pz)]3, {[Ag(µ-3,5-(CF3)2pz)]3, and {[Au(µ-3,5-(CF3)2pz)]3 with TTF, DBTTF and BEDT-TTF give rise to a series of coinage metal(I)-based new binary donor-acceptor adducts {[Cu(µ-3,5-(CF3)2pz)]3DBTTF} (1), {[Ag(µ-3,5-(CF3)2pz)]3DBTTF} (2), {[Au(µ-3,5-(CF3)2pz)]3DBTTF} (3), {[Cu(µ-3,5-(CF3)2pz)]3TTF} (4), {[Ag(µ-3,5-(CF3)2pz)]3TTF} (5), {[Au(µ-3,5-(CF3)2pz)]3TTF} (6), {[Cu(µ-3,5-(CF3)2pz)]3BEDT-TTF} (7), {[Ag(µ-3,5-(CF3)2pz)]3BEDT-TTF} (8), and {[Au(µ-3,5-(CF3)2pz)]3BEDT-TTF} (9), where pz = pyrazolate, TTF = tetrathiafulvalene, DBTTF = dibenzotetrathiafulvalene, and BEDT-TTF = bis(ethylenedithio)tetrathiafulvalene. This series of binary donor-acceptor adducts has been found to exhibit remarkable supramolecular structures in both the solid state and solution, whereby they exhibit supramolecular stacked chains and oligomers, respectively. The supramolecular solid-state and solution binary donor-acceptor adducts also exhibit superior shelf stability under ambient laboratory storage conditions. Structural and other electronic properties of solids and solutions of these adducts have been characterized by single-crystal X-ray diffraction (XRD) structural analysis, 1H and 19F NMR, UV-vis-near-IR spectroscopy, Fourier transform infrared, and computational investigations. The combined results of XRD structural data analysis, spectroscopic measurements, and theoretical studies suggest sustenance of the donor-acceptor stacked structure and electronic communication in both the solid state and solution. These properties are discussed in terms of potential applications for this new class of supramolecular binary donor-acceptor adducts in molecular electronic devices, including solar cells, magnetic switching devices, and field-effect transistors.

Convenient framework of poly functionalized (E)-2-benzylideno-(Z)-carbazolylideno cyanoacetamides via rearrangements as an efficient antibiofilm inhibitors with SAR study.

A simple and one-pot approach for the synthesis of highly functionalized novel (E)-2-benzylideno-(Z)-carbazolylideno cyanoacetamide derivatives from different 2-(2',3',4',9'-tetrahydro-carbazol-1'-ylidene)-propanedinitriles and aryl/heteroaryl carbaldehydes via vinylogous aldol reaction. The structures of the molecules were designated by FT-IR, 1H NMR, 13C NMR studies, elemental and X-ray crystallographic analysis. The synthesized pure products have been screened for in vitro antibiofilm inhibitory activity towards antibiotic-resistant pathogenic organisms. All the synthesized compounds showed biofilm inhibition. Promisingly, the moieties 3a, 3d and 3h showed higher antibiofilm activity at biofilm inhibitory concentration (BIC) (200 µg/mL) against bacterial pathogens. Among the three moieties, 3a showed high prospective against E. coli biofilm with minimal and maximal BIC percentage of 32% (10 µg/mL) and 89% (100 µg/mL) and chosen lowest BIC for further evaluation. Also, the 3a generate ROS two fold at 1 h treatment in E. coli biofilm. The 3a exhibited no toxic effect on cell viability upto 75 µg/mL in HEK293 cell lines. The results of the present study reveal that among (E)-2-benzylideno-(Z)-carbazolylideno cyanoacetamides, (E)-2-benzylideno-6-methyl-2,3,4,9-tetrahydro-1H-carbazol-(Z)-α-carbamino-α-cyano-1-ylidene (3a) could be exploited as an excellent antibiofilm agent against carbapenem-resistant E. coli bacteria strains.

New Coordination Polymers of Copper(I) and Silver(I) with Pyrazine and Piperazine: A Step Toward "Green" Chemistry and Optoelectronic Applications.

Five coordination polymers and one hexanuclear cluster have been obtained, and their crystal structures were determined upon reaction of Cu(I) or Ag(I) precursors with pyrazine (Pyz) or piperazine (Ppz). Five complexes are mixed-imine-ligand with anionic-fluorinated pyrazolate [3,5-(CF3)2Pz]- ([PzF]-) besides Pyz or Ppz, whereas the sixth had the neutral diimine as a single chromophore. Complexes 1-3 are isomers of the same Cu/PzF/Pyz composition with the same or different unit cell stoichiometry, namely, {Cu6[3,5-(CF3)2Pz]6(Pyz)3(CH2Cl2)}∞ (1·CH2Cl2), {Cu2[3,5-(CF3)2Pz]}2(Pyz)2·toluene}∞ (2·toluene), and {Cu3[3,5-(CF3)2Pz]3(Pyz)1.5·1.5benzene}∞ (3·1.5benzene), respectively. Altering only the metal attains {Ag6[3,5-(CF3)2Pz]6(Pyz)2·2benzene} (4·2benzene), while also changing the neutral diimine attains {Ag2[3,5-(CF3)2Pz]2(Ppz)}∞ (5). Using Pyz without an anionic imine yields {[Cu(Pyz)(MeCN)2][BF4]}∞ (6). The crystal structure of 1 shows two trimers linked together with two pyrazine ligands. Crystals of 2 represent a metal-organic framework (MOF-TW1) with significant surface area (1278 m2/g) and porosity (23.7% void volume) without considering toluene adsorbates in channels. MOF-TW1 was obtained serendipitously upon a reaction attempt to attain a mixed-metal product, instead attaining a Cu(I)-only product with interconnected four-coordinate dinuclear units. Likewise, 3 was obtained through a transmetalation of all Ag atoms in 4 to replace them by Cu atoms. Three reactions (to obtain 1, 4, and 5) were successfully carried out by both solvent-mediated and solventless transformations, whereas 2 and 3 were obtained only by solvent-mediated reactions, while 6 was attainable only by solventless transformations. The solventless transformations occurred either by sublimation and vapor diffusion or by mechanical grinding at ambient laboratory conditions-without the aid of heating, high pressure, vacuum, or any automated equipment. All transformations could be monitored by the human eye as the reaction progresses, as evidenced by progressive discoloration and/or luminescence changes. All crystal structures were obtained with the aid of conventional crystal growth methods from organic solvents for bulk products obtained from both solvelntless and solvent-mediated reactions. Powder X-ray diffraction was used to compare bulk products with one another and the crystallographic products. All Cu(I) products are colored and nonluminescent; the progress of their vapor diffusion-based solventless reactions can be followed by gradual discoloration of white solid reactants and/or quenching precursor's phosphorescence. Both Ag(I) products were colorless with 4 being luminescent but not 5.

Remarkable Aurophilicity and Photoluminescence Thermochromism in a Homoleptic Cyclic Trinuclear Gold(I) Imidazolate Complex.

A new aurophilically-bonded cyclic trinuclear gold(I) complex, tris[µ2-(1-ethylimidazolato-N3,C2)gold(I)] ([Au3(EtIm)3], 1), has been synthesized and characterized by temperature-dependent crystallographic and photophysical investigations. The crystal packing of 1 reveals two independent molecules in the unit cell, signifying two distinct pairs of dimer-of-trimer units convened by pairwise intermolecular Au···Au interactions of 3.0662(3) and 3.1407(3) Å at 100 K, representing the shortest pairwise intermolecular aurophilic interactions among all cyclic trimetallic gold(I) complexes to date. Remarkably, crystals of 1 exhibit gigantic photoluminescence thermochromism of 10164 cm-1-from violet to red!-attributed to internal conversion between a higher-energy (T2 → S0; λmax ∼409 nm) and lower-energy (T1 → S0; λmax ∼700 nm) phosphorescent band below and above 200 K, respectively, likely representing an excited-state phase change.

Additive- and Metal-Free, Predictably 1,2- and 1,3-Regioselective, Photoinduced Dual C-H/C-X Borylation of Haloarenes.

We report herein a simple, additive- and metal-free, photoinduced, dual C-H/C-X borylation of chloro-, bromo-, and iodoarenes. The reaction produces 1,2- and 1,3-diborylarenes on gram scales under batch and continuous flow conditions. The regioselectivity of the dual C-H/C-X borylation is determined by the solvent and the substituents in the parent haloarenes.

Competing amination and C-H arylation pathways in Pd/xantphos-catalyzed transformations of binaphthyl triflates: switchable routes to chiral amines and helicene derivatives.

A Pd(OAc)2/xantphos catalyst system was found effective for benzylaminations of binaphthyl 2-triflates bearing a variety of alkyl, benzyl, and substituted phenyl substituents at the 2'-position. With 2'-aryl substituents, an intramolecular Pd-catalyzed C-H arylation was observed as a competing side reaction under some conditions. By adjusting the solvent and quantity of the amine, the reaction was optimized to favor either the amination or the C-H arylation pathway, affording two distinct and potentially useful sets of products. The amines represent tunable chiral ligand precursors, while the C-H arylation pathway affords a series of benzofused [5]helicene derivatives. Kinetic studies and activation parameters for the C-H arylation pathway, supported by DFT calculations, are consistent with a concerted metalation-deprotonation (CMD) mechanism involving a Pd-bound carbonate as the base. Xantphos is proposed to facilitate the turnover-limiting inner-sphere CMD step by acting as a hemilabile ligand, while its wide bite angle engenders a low reductive elimination barrier.

Photoinduced charge separation in wide-band capturing, multi-modular bis(donor styryl)BODIPY-fullerene systems.

A new series of multi-modular donor-acceptor systems capable of exhibiting photoinduced charge separation have been designed, synthesized and characterized using various techniques. In this series, the electron donor was a BF2-chelated dipyrromethene (BODIPY) appended with two styryl linkers carrying two electron rich triphenylamine or phenothiazine entities. Fulleropyrrolidine linked at the meso-position of the BODIPY ring served as an electron acceptor. As a result of extended conjugation and multiple electroactive chromophore entities, the bis-styryl BODIPY revealed absorbance and emission well-into the near-infrared region covering a 300-850 nm spectral range. Using redox, computational, absorbance and emission data, an energy level diagram was constructed that helped in envisioning the different photochemical events. Spectral evidence for photoinduced charge separation in these systems was established from femtosecond and nanosecond transient absorption studies. The measured rate constants indicated fast charge separation and relatively slow charge recombination revealing their usefulness in light energy harvesting and optoelectronic device building applications. The bis(donor styryl)BODIPY-fullerene systems populated BODIPY triplet excited states during the process of charge recombination.

Phenothiazine-BODIPY-fullerene triads as photosynthetic reaction center models: substitution and solvent polarity effects on photoinduced charge separation and recombination.

Novel photosynthetic reaction center model compounds of the type donor2 -donor1 -acceptor, composed of phenothiazine, BF2 -chelated dipyrromethene (BODIPY), and fullerene, respectively, have been newly synthesized using multistep synthetic methods. X-ray structures of three of the phenothiazine-BODIPY intermediate compounds have been solved to visualize the substitution effect caused by the phenothiazine on the BODIPY macrocycle. Optical absorption and emission, computational, and differential pulse voltammetry studies were systematically performed to establish the molecular integrity of the triads. The N-substituted phenothiazine was found to be easier to oxidize by 60 mV compared to the C-substituted analogue. The geometry and electronic structures were obtained by B3LYP/6-31G(dp) calculations (for H, B, N, and O) and B3LYP/6-31G(df) calculations (for S) in vacuum, followed by a single-point calculation in benzonitrile utilizing the polarizable continuum model (PCM). The HOMO-1, HOMO, and LUMO were, respectively, on the BODIPY, phenothiazine and fullerene entities, which agreed well with the site of electron transfer determined from electrochemical studies. The energy-level diagram deduced from these data helped in elucidating the mechanistic details of the photochemical events. Excitation of BODIPY resulted in ultrafast electron transfer to produce PTZ-BODIPY(.+) -C60 (.-) ; subsequent hole shift resulted in PTZ(.+) -BODIPY-C60 (.-) charge-separated species. The return of the charge-separated species was found to be solvent dependent. In nonpolar solvents the PTZ(.+) -BODIPY-C60 (.-) species populated the (3) C60 * prior to returning to the ground state, while in polar solvent no such process was observed due to relative positioning of the energy levels. The (1) BODIPY* generated radical ion-pair in these triads persisted for few nanoseconds due to electron transfer/hole-shift mechanism.

Optoelectronic tuning of organoborylazadipyrromethenes via effective electronegativity at the metalloid center.

Organoborylazadipyrromethenes were synthesized from free base and fluoroborylazadipyrromethenes and characterized with regard to their structural and electronic properties. B-N bond lengths, along with photophysical and redox behavior, appear dependent on the effective electronegativity at the boron atom as tuned by its substituents, with stronger electronegativity correlating to a shorter B-N bond length, red-shifted absorbance, enhanced fluorescence lifetime and yield, and positively shifted redox potentials.

Molecular and electronic structure of cyclic trinuclear gold(I) carbeniate complexes: insights for structure/luminescence/conductivity relationships.

An experimental and computational study of correlations between solid-state structure and optical/electronic properties of cyclotrimeric gold(I) carbeniates, [Au3(RN═COR')3] (R, R' = H, Me, (n)Bu, or (c)Pe), is reported. Synthesis and structural and photophysical characterization of novel complexes [Au3(MeN═CO(n)Bu)3], [Au3((n)BuN═COMe)3], [Au3((n)BuN═CO(n)Bu)3], and [Au3((c)PeN═COMe)3] are presented. Changes in R and R' lead to distinctive variations in solid-state stacking, luminescence spectra, and conductive properties. Solid-state emission and excitation spectra for each complex display a remarkable dependence on the solid-state packing of the cyclotrimers. The electronic structure of [Au3(RN═COR')3] was investigated via molecular and solid-state simulations. Calculations on [Au3(HN═COH)3] models indicate that the infinitely extended chain of eclipsed structures with equidistant Au--Au intertrimer aurophilic bonding can have lower band gaps, smaller Stokes shifts, and reduced reorganization energies (λ). The action of one cyclotrimer as a molecular nanowire is demonstrated via fabrication of an organic field effect transistor and shown to produce a p-type field effect. Hole transport for the same cyclotrimer-doped within a poly(9-vinylcarbazole) host-produced a colossal increase in current density from ∼1 to ∼1000 mA/cm(2). Computations and experiments thus delineate the complex relationships between solid-state morphologies, electronic structures, and optoelectronic properties of gold(I) carbeniates.

Phenothiazine-azaBODIPY-fullerene supramolecules: syntheses, structural characterization, and photochemical studies.

Photoactive supramolecules composed of two entities of carbamoyl phenothiazines (PTZ) positioned at different locations of the BF2-chelated azadipyrromethene (azaBODIPY) periphery and fulleropyrrolidine (C60) have been newly designed and synthesized to probe excited state events. The X-ray structure of one of the precursor compounds, (PTZ)2-azaBODIPY, revealed spatially well separated PTZ entities without causing any steric hindrance. The supramolecules were fully characterized by spectral, computational, electrochemical and photochemical techniques. The geometry and electronic structures were arrived at by B3LYP/6-31G(dp) calculations (for H, B, N, and O) and B3LYP/6-31G(df) calculations (for S) in benzonitrile utilizing the Conductor Polarizable Continuum Model (CPCM). The different redox states were established from the differential pulse voltammetry (DPV) studies and the data were used to estimate free-energy change associated with the charge separation process. Interestingly, although phenothiazine is known to be a very good electron donor in photosynthetic model compounds and solar energy harvesting dyes, in the present system, the difficulty in oxidizing carbamoyl phenothiazine entities' contribution to the photochemistry originating from the singlet excited azaBODIPY was minimal. Consequently, femtosecond laser flash photolysis studies provided evidence for the occurrence of photoinduced electron transfer from (1)azaBODIPY* to C60 without participation of the PTZ entities. The energy level diagram constructed using spectral and electrochemical data provided a rational explanation for this observation. By monitoring the rise and decay of the fullerene radical ion peak, the measured rate of charge separation, kCS, and charge recombination, kCR, for supramolecule 1 were found to be 3.08 × 10(10) s(-1) and 7.96 × 10(9) s(-1), respectively, while these values for supramolecule 2 were found to be 4.68 × 10(11) s(-1) and 1.13 × 10(10) s(-1), respectively, revealing the occurrence of ultrafast electron transfer events. The photochemically generated (PTZ)2-azaBODIPY˙(+)-C60˙(-) radical ion pair followed a charge recombination path by populating (3)azaBODIPY* prior to returning to the ground state as confirmed by nanosecond transient absorption measurements.