Novel Technologies towards the Implementation and Exploitation of "Green" Wireless Agriculture Sensors.

This manuscript presents the use of three novel technologies for the implementation of wireless green battery-less sensors that can be used in agriculture. The three technologies, namely, additive manufacturing, energy harvesting, and wireless power transfer from airborne transmitters carried from UAVs, are considered for smart agriculture applications, and their combined use is demonstrated in a case study experiment. Additive manufacturing is exploited for the implementation of both RFID-based sensors and passive sensors based on humidity-sensitive materials. A number of energy-harvesting systems at UHF and ISM frequencies are presented, which are in the position to power platforms of wireless sensors, including humidity and temperature IC sensors used as agriculture sensors. Finally, in order to provide wireless energy to the soil-based sensors with energy harvesting features, wireless power transfer (WPT) from UAV carried transmitters is utilized. The use of these technologies can facilitate the extensive use and exploitation of battery-less wireless sensors, which are environmentally friendly and, thus, "green". Additionally, it can potentially drive precision agriculture in the next era through the implementation of a vast network of wireless green sensors which can collect and communicate data to airborne readers so as to support, the Artificial Intelligence and Machine Learning-based decision-making with data.

Beamforming with 1 × N Conformal Arrays.

The rapid growth of wireless spectrum access through cellular and IoT devices, for example, requires antennas with more capabilities such as being conformal and self-adapting beamforming. In this paper, the adaptive beamforming patterns of microstrip patch antenna arrays on changing flexible (or conformal) curved surfaces are developed by deriving array coefficients based on the projection method that includes the mutual coupling between elements. A linear four-element microstrip patch antenna array is then embedded on two deformed conformal surfaces to investigate the projection method for desired beamforming patterns. The generated beamforming radiation patterns using the computed weighting coefficients are validated with theoretical equations evaluated in MATLAB, full-wave simulations in HFSS and measurement results. The measured results of the fabricated system agree with the simulated results. Furthermore, new guidelines are provided on the effects of mutual coupling and changing conformal surfaces for various beam-forming patterns. Such demonstrations pave the way to an efficient and robust conformal phased-array antenna with multiple beam forming and adaptive nulling capabilities.

Conformal Design of a High-Performance Antenna for Energy-Autonomous UWB Communication.

In view of the need for communication with distributed sensors/items, this paper presents the design of a single-port antenna with dual-mode operation, representing the front-end of a future generation tag acting as a position sensor, with identification and energy harvesting capabilities. An Archimedean spiral covers the lower European Ultra-Wideband (UWB) frequency range for communication/localization purposes, whereas a non-standard dipole operates in the Ultra High Frequency (UHF) band to wirelessly receive the energy. The versatility of the antenna is guaranteed by the inclusion of a High Impedance Surface (HIS) back layer, which is responsible for the low-profile stack-up and the insensitivity to the background material. A conformal design, supported by 3D-printing technology, is pursued to check the versatility of the proposed architecture in view of any application involving its deformation and tracking/powering operations.

Reconfigurable absorptive and polarization conversion metasurface consistent for wide angles of incidence.

In this paper, a single-layer reconfigurable reflective metasurface is presented. The proposed metasurface operates at 5.4 GHz and can achieve either absorption or cross-polarization conversion corresponding at two different diode biasing states. The reflective metasurface acts as an absorber for an incident wave when the diodes are forward-biased. Similarly, it changes the polarization state of the reflected wave for a linearly polarized incident wave when the diodes are reverse-biased. The proposed structure maintains the aforementioned performance characteristics for oblique incidence, up to 60° compared to the perpendicular incidence. The proposed metasurface can achieve linear to linear polarization conversion with polarization conversion ratio (PCR) > 95% and absorption, with absorption ratio (AR) > 80% in the same frequency band just by reconfiguring the state of the PIN diodes.

A multiband circular polarization selective metasurface for microwave applications.

In this research article, a multiband circular polarization selective (CPS) metasurface is presented. A reciprocal bi-layered metasurface is designed by introducing the chirality in the structure. The top layer of the proposed metasurface is composed of circular split-ring resonator with a cross shape structure inside it. The same structure is printed on the bottom side of the proposed metasurface by rotating it at an angle of 90° to achieve chirality in the structure. The proposed metasurface is able to add CPS surface capability between 5.18 and 5.23 GHz for y-polarized incident wave. For the frequency band of 5.18-5.23 GHz, the transmission goes up to - 4 dB, while the polarization extinction ratio (PER) reaches up to - 27.4 dB at 5.2 GHz. Similarly, for x-polarized incident wave, three strategic CPS operating bands are achieved within the frequency ranges of 10.64-10.82 GHz, 12.25-12.47 GHz, and 14.42-14.67 GHz. The maximum PER of 47.16 dB has been achieved for the 14.42-14.67 GHz frequency band at 14.53 GHz. Furthermore, the response of the metasurface does not vary against oblique incidences up to 45°. The simple structure, angular stability, multiband and miniaturized size make this metasurface an outstanding applicant for polarization conversion and biomedical applications.

A multifunctional ultrathin flexible bianisotropic metasurface with miniaturized cell size.

In this paper, a flexible bianisotropic metasurface possessing omega-type coupling is presented. The designed metasurface behaves differently when excited from either forward (port 1) or back (port 2) sides. It provides an absorption of 99.46% at 15.1 Gigahertz (GHz), when illuminated from port 1, whereas, on simultaneous illumination from port 2, it behaves like a partially reflective surface (PRS). Furthermore, the presented metasurface not only acts as an in-band absorptive surface (port 1) and partially reflective surface (port 2), but it also provides 97% out-of-band transmission at 7.8 GHz. The response of the presented metasurface remains the same for both transverse Electric (TE) and transverse magnetic (TM) polarized wave or any arbitrary linearly polarized wave. Additionally, the response of the metasurface is angularly stable for any oblique incidence up to 45º. The proposed ultrathin flexible metasurface with absorption, partial reflection and out-of-band transmission properties can be used in the Fabry Perrot cavity antenna for gain enhancement with radar cross-section (RCS) reduction both for passband and stop-band filtering, and conformal antenna applications.