Same day discharge after chronic total occlusion interventions: A single center experience.

OBJECTIVES: To assess the feasibility and safety of same day discharge (SDD) after chronic total occlusion (CTO) percutaneous coronary intervention (PCI). BACKGROUND: CTO PCI has been associated with higher complication rates and procedural and hospitalization costs. Shortening post-PCI hospitalization length not only increases the patients' comfort but at the same time it consists an important part of cost reduction policies. METHODS: We retrospectively compared the 30-day outcomes of patients who underwent CTO PCI at the Red Cross Hospital, Greece between January 2016 and June 2019 and underwent SDD versus non-SDD. Major adverse cardiovascular events (MACE) were defined as the composite of death, myocardial infarction, urgent repeat target vessel revascularization, tamponade, and stroke. RESULTS: A total of 173 patients (mean age 63.7 ± 8.9 years) were included, of whom 51 (30%) underwent SDD. SDD patients were less likely to have diabetes mellitus (51 vs. 31%, p = .015), arterial hypertension (89 vs. 67%, p < .001), and acute coronary syndrome presentation (39.7 vs. 21.6%, p = .022), compared with non-SDD patients. Forearm access was used in all SDD patients and in 83% of the non-SDD patients. The 30-day incidence of MACE was 0% in the SDD group and 1.6% in the non-SDD group. Multivariable analysis showed that diabetes mellitus and longer procedural time were associated with lower probability of SDD (OR: 0.34, 95% CI: 0.15, 0.73 and OR: 0.29, 95% CI: 0.12, 0.71, respectively). CONCLUSIONS: SDD appears to be feasible and safe in selected patients undergoing an uncomplicated CTO PCI through forearm approach.

Circulating levels of TNF-like cytokine 1A correlate with reflected waves and atherosclerosis extent and may predict cardiac death in patients with stable coronary artery disease.

BACKGROUND: TNF-like cytokine 1A (TL1A)-mediated interactions are involved in atheromatic plaque formation. In stable coronary artery disease (CAD) we examined whether circulating TL1A levels correlate with coronary and/or peripheral atherosclerosis extent and predict future cardiovascular events. METHODS: In this cross-sectional study, peripheral vascular studies and TL1A serum measurements were performed in 122 consecutive patients with angiographically confirmed CAD who were followed for a median of 41.9 months. TL1A levels were compared against controls (n = 63) and 20 patients with acute coronary syndrome (ACS). RESULTS: TL1A was higher in ACS than the 2 other groups (p < 0.001). In stable CAD, after adjustment for traditional risk factors independent positive correlations between TL1A serum levels and reflected waves (p = 0.049), and carotid atheromatic plaque score (p = 0.049) were evident. In stable patients with a history of ACS, TL1A levels correlated with worse endothelial function (p = 0.006), extent of CAD assessed by Gensini score (p = 0.042), and cardiac mortality (p = 0.051). CONCLUSIONS: This pilot study suggests that serum TL1A measurements are of clinical value in CAD. Studies on the pathogenetic role of TL1A in atherosclerosis and its sequelae are warranted.

Eco-Friendly Lead-Free Solder Paste Printing via Laser-Induced Forward Transfer for the Assembly of Ultra-Fine Pitch Electronic Components.

Current challenges in printed circuit board (PCB) assembly require high-resolution deposition of ultra-fine pitch components (<0.3 mm and <60 µm respectively), high throughput and compatibility with flexible substrates, which are poorly met by the conventional deposition techniques (e.g., stencil printing). Laser-Induced Forward Transfer (LIFT) constitutes an excellent alternative for assembly of electronic components: it is fully compatible with lead-free soldering materials and offers high-resolution printing of solder paste bumps (<60 µm) and throughput (up to 10,000 pads/s). In this work, the laser-process conditions which allow control over the transfer of solder paste bumps and arrays, with form factors in line with the features of fine pitch PCBs, are investigated. The study of solder paste as a function of donor/receiver gap confirmed that controllable printing of bumps containing many microparticles is feasible for a gap < 100 µm from a donor layer thickness set at 100 and 150 µm. The transfer of solder bumps with resolution < 100 µm and solder micropatterns on different substrates, including PCB and silver pads, have been achieved. Finally, the successful operation of a LED interconnected to a pin connector bonded to a laser-printed solder micro-pattern was demonstrated.

Distal Radial Access: A Review Article.

Transradial approach (TRA) for coronary angiography and interventions has been increasingly used over the last decades and has become the default strategy in the majority of catheterization laboratories worldwide. Recently, a novel transradial access site, the distal radial access (DRA), has been proposed as an alternative to traditional TRA. Several case reports and case series have been published on this new approach over the last year showing overall good success rates. Aim of this review is to present the possible benefits and drawbacks of DRA and offer guidance on its successful use.

Single Sheath for Dual Injection Prior to CTO Intervention.

To our knowledge, this is the first reported case of a dual injection using a single sheath approach, in order to evaluate a CTO and plan a future intervention.

"Single Arm-Double Access" for CTO Intervention.

To our knowledge, this is the first reported case of a dual-access approach for CTO intervention using transradial and ipsilateral transulnar access. Although retrograde CTO intervention is a challenging procedure, a single arm-double access approach seems to be a feasible alternative that may be useful in patients with limited access-site availability.

Distal Versus Traditional Radial Approach for Coronary Angiography.

PURPOSE: The aim of this study was to evaluate the efficacy and safety of distal radial (DR) versus traditional radial (TR) approach during coronary angiography. METHODS: Two hundred patients scheduled to undergo transradial coronary angiography were randomized between the two approaches. Primary endpoint of the study was switching to another access site due to inability of successful target artery cannulation. Secondary endpoints were time to cannulation, total procedure duration, number of attempts, number of skin punctures and duration of manual hemostasis. Secondary safety endpoints were the rate of moderate or severe spasm, arm hematoma EASY class III or more and radial artery occlusion at discharge. Quality of life endpoint was the patient's preference of cannulation method at 30 days. RESULTS: The primary endpoint was met in 30 patients (30%) from the DR group and 2 patients (2%) from the TR group (p < 0.001). The time of cannulation was longer in the DR group compared to the TR group (269 ±â€¯251 s vs 140 ±â€¯161 s, p < 0.001), but this did not affect the total procedural duration (925 ±â€¯896 s vs 831 ±â€¯424 s, p = 0.494). The number of attempts and the number of skin punctures were more in the DR group compared to the TR group (6.8 ±â€¯6.2 vs 3.4 ±â€¯4.5, p < 0.001 and 2.4 ±â€¯1.7 vs 1.6 ±â€¯1.2, p < 0.001, respectively). However, DR treated patients had faster manual hemostasis time compared to TR treated patients (568 ±â€¯462 s vs 841 ±â€¯574 s, p = 0.002). There were no differences recorded in the safety endpoints of moderate or severe spasm, EASY grade III or more radial hematomas or the incidence of radial artery occlusion after the procedure. Patients' preference to the randomized puncture sites was the same (79% vs 85%, p = 0.358). CONCLUSION: Distal radial approach is associated with lower successful cannulation rates and shorter manual hemostasis time compared to the traditional radial approach.

Pre-treatment with simvastatin prevents the induction of diet-induced atherosclerosis in a rabbit model.

The aim of the present study was to investigate the potential antiatherosclerotic activities of simvastatin in rabbits. Twenty-two, male, New Zealand rabbits were divided into the following groups: Control group (group C); cholesterol group (group A), in which the rabbits were fed a commercial rabbit chow supplemented with 0.5% w/w cholesterol for 8 weeks and then fed with normal chow for an additional 8 weeks; and a treatment group (group B), in which the rabbits initially received standard commercial rabbit chow along with being administered simvastatin for 8 weeks, following which they consumed a high-cholesterol diet for a further 8 weeks. The rabbits pre-treated with simvastatin presented significantly lower serum cholesterol and low-density lipoprotein cholesterol levels when compared with the non simvastatin-treated cholesterol-fed animals. Furthermore, none of the rabbits in the simvastatin group presented with atherosclerotic lesions in the aorta. Thus, simvastatin was demonstrated to exhibit preventive properties against the formation of atherosclerosis in the atherosclerosis model in the current study, predominantly via its hypolipidemic activity.

A network of peers and practices for addressing Learner Variability: UDLnet.

Grounded on new research in neuroscience and the Design for All principles, Universal Design for Learning (UDL) constitutes an educational approach that promotes access, participation and progress in the general curriculum for all learners. The difficulty is in all cases translating the UDL principles and guidelines into practice. Though the UDL policy context supports a shift to inclusion, professionals need more support to develop their practice. In order to bridge the gap between policies and practice the UDLnet network aspires to address this necessity collecting and creating good practices under the framework of Universal Design for Learning. This paper presents the UDLnet project, its aims, the methodological framework, as well as the envisaged themes. UDLnet is a European network that aims to contribute to the improvement of teachers' practice in all areas of their work, combining ICT skills with UDL-based innovations in pedagogy, curriculum, and institutional organization.