Ambient exposure to fine particulate matter with oxidative potential affects oxidative stress biomarkers in pregnancy.

Prenatal exposures to ambient particulate matter (PM2.5) from traffic may generate oxidative stress, and thus contribute to adverse birth outcomes. We investigated whether PM2.5 constituents from brake and tire wear affect levels of oxidative stress biomarkers (malondialdehyde (MDA), 8-hydroxy-2'-deoxyguanosine (8-OHdG)) using urine samples collected up to three times during pregnancy in 156 women recruited from antenatal clinics at the University of California Los Angeles. Land use regression models with co-kriging were employed to estimate average residential outdoor concentrations of black carbon (BC), PM2.5 mass, PM2.5 metal components, and three PM2.5 oxidative potential metrics during the 4-weeks prior to urine sample collection. 8-OHdG concentrations in mid-pregnancy increased by 24.8% (95% CI: 9.0, 42.8) and 14.3% (95% CI: 0.4%, 30.0%) per interquartile range (IQR) increase in PM2.5 mass and BC, respectively. The brake wear marker (barium) and the oxidative potential metrics were associated with increased MDA concentration in the 1st sample collected (10-17 gestational week), but 95% CIs included the null. Traffic-related air pollution contributed in early to mid-pregnancy to oxidative stress generation previously linked to adverse birth outcomes.

Characterizing Hydroxyl Radical Formation from the Light-Driven Fe(II)-Peracetic Acid Reaction, a Key Process for Aerosol-Cloud Chemistry.

The reaction of peracetic acid (PAA) and Fe(II) has recently gained attention due to its utility in wastewater treatment and its role in cloud chemistry. Aerosol-cloud interactions, partly mediated by aqueous hydroxyl radical (OH) chemistry, represent one of the largest uncertainties in the climate system. Ambiguities remain regarding the sources of OH in the cloud droplets. Our research group recently proposed that the dark and light-driven reaction of Fe(II) with peracids may be a key contributor to OH formation, producing a large burst of OH when aerosol particles take up water as they grow to become cloud droplets, in which reactants are consumed within 2 min. In this work, we quantify the OH production from the reaction of Fe(II) and PAA across a range of physical and chemical conditions. We show a strong dependence of OH formation on ultraviolet (UV) wavelength, with maximum OH formation at λ = 304 ± 5 nm, and demonstrate that the OH burst phenomenon is unique to Fe(II) and peracids. Using kinetics modeling and density functional theory calculations, we suggest the reaction proceeds through the formation of an [Fe(II)-(PAA)2(H2O)2] complex, followed by the formation of a Fe(IV) complex, which can also be photoactivated to produce additional OH. Determining the characteristics of OH production from this reaction advances our knowledge of the sources of OH in cloudwater and provides a framework to optimize this reaction for OH output for wastewater treatment purposes.

Iron and Copper Alter the Oxidative Potential of Secondary Organic Aerosol: Insights from Online Measurements and Model Development.

The oxidative potential (OP) of particulate matter has been widely suggested as a key metric for describing atmospheric particle toxicity. Secondary organic aerosol (SOA) and redox-active transition metals, such as iron and copper, are key drivers of particle OP. However, their relative contributions to OP, as well as the influence of metal-organic interactions and particulate chemistry on OP, remains uncertain. In this work, we simultaneously deploy two novel online instruments for the first time, providing robust quantification of particle OP. We utilize online AA (OPAA) and 2,7-dichlorofluoroscein (ROSDCFH) methods to investigate the influence of Fe(II) and Cu(II) on the OP of secondary organic aerosol (SOA). In addition, we quantify the OH production (OPOH) from these particle mixtures. We observe a range of synergistic and antagonistic interactions when Fe(II) and Cu(II) are mixed with representative biogenic (ß-pinene) and anthropogenic (naphthalene) SOA. A newly developed kinetic model revealed key reactions among SOA components, transition metals, and ascorbate, influencing OPAA. Model predictions agree well with OPAA measurements, highlighting metal-ascorbate and -naphthoquinone-ascorbate reactions as important drivers of OPAA. The simultaneous application of multiple OP assays and a kinetic model provides new insights into the influence of metal and SOA interactions on particle OP.

Aerosol Oxidative Potential in the Greater Los Angeles Area: Source Apportionment and Associations with Socioeconomic Position.

Oxidative potential (OP) has been proposed as a possible integrated metric for particles smaller than 2.5 µm in diameter (PM2.5) to evaluate adverse health outcomes associated with particulate air pollution exposure. Here, we investigate how OP depends on sources and chemical composition and how OP varies by land use type and neighborhood socioeconomic position in the Los Angeles area. We measured OH formation (OPOH), dithiothreitol loss (OPDTT), black carbon, and 52 metals and elements for 54 total PM2.5 samples collected in September 2019 and February 2020. The Positive Matrix Factorization source apportionment model identified four sources contributing to volume-normalized OPOH: vehicular exhaust, brake and tire wear, soil and road dust, and mixed secondary and marine. Exhaust emissions contributed 42% of OPOH, followed by 21% from brake and tire wear. Similar results were observed for the OPDTT source apportionment. Furthermore, by linking measured PM2.5 and OP with census tract level socioeconomic and health outcome data provided by CalEnviroScreen, we found that the most disadvantaged neighborhoods were exposed to both the most toxic particles and the highest particle concentrations. OPOH exhibited the largest inverse social gradients, followed by OPDTT and PM2.5 mass. Finally, OPOH was the metric most strongly correlated with adverse health outcome indicators.

A Fulvic Acid-like Substance Participates in the Pro-inflammatory Effects of Cigarette Smoke and Wood Smoke Particles.

We tested the postulates that (1) a fulvic acid (FA)-like substance is included in cigarette smoke and wood smoke particles (WSP) and (2) cell exposure to this substance results in a disruption of iron homeostasis, associated with a deficiency of the metal and an inflammatory response. The fluorescence excitation-emission matrix spectra of the water-soluble components of cigarette smoke condensate and WSP (Cig-WS and Wood-WS) approximated those for the standard reference materials, Suwanee River and Nordic fulvic acids (SRFA and NFA). Fourier transform infrared spectra for the FA fraction of cigarette smoke and WSP (Cig-FA and Wood-FA), SRFA, and NFA also revealed significant similarities (O-H bond in alcohols, phenols, and carboxylates, C═O in ketones, aldehydes, and carboxylates, and a significant carboxylate content). After exposure to Cig-WS and Wood-WS and the FA standards, iron was imported by respiratory epithelial cells, reflecting a functional iron deficiency. The release of pro-inflammatory mediators interleukin (IL)-8 and IL-6 by respiratory epithelial cells also increased following exposures to Cig-WS, Wood-WS, SRFA, and NFA. Co-exposure of the respiratory epithelial cells with iron decreased supernatant concentrations of the ILs relative to exposures to Cig-WS, Wood-WS, SRFA, and NFA alone. It is concluded that (1) a FA-like substance is included in cigarette smoke and WSP and (2) respiratory epithelial cell exposure to this substance results in a disruption of iron homeostasis associated with both a cell deficiency of the metal and an inflammatory response.

Ozone Reacts With Carbon Black to Produce a Fulvic Acid-Like Substance and Increase an Inflammatory Effect.

Exposure to ambient ozone has been associated with increased human mortality. Ozone exposure can introduce oxygen-containing functional groups in particulate matter (PM) effecting a greater capacity of the particle for metal complexation and inflammatory effect. We tested the postulate that (1) a fulvic acid-like substance can be produced through a reaction of a carbonaceous particle with high concentrations of ozone and (2) such a fulvic acid-like substance included in the PM can initiate inflammatory effects following exposure of respiratory epithelial (BEAS-2B) cells and an animal model (male Wistar Kyoto rats). Carbon black (CB) was exposed for 72 hours to either filtered air (CB-Air) or approximately 100 ppm ozone (CB-O3). Carbon black exposure to high levels of ozone produced water-soluble, fluorescent organic material. Iron import by BEAS-2B cells at 4 and 24 hours was not induced by incubations with CB-Air but was increased following coexposures of CB-O3 with ferric ammonium citrate. In contrast to CB-Air, exposure of BEAS-2B cells and rats to CB-O3 for 24 hours increased expression of pro-inflammatory cytokines and lung injury, respectively. It is concluded that inflammatory effects of carbonaceous particles on cells can potentially result from (1) an inclusion of a fulvic acid-like substance after reaction with ozone and (2) changes in iron homeostasis following such exposure.

Development of a Physiologically Relevant Online Chemical Assay To Quantify Aerosol Oxidative Potential.

Large-scale epidemiological studies have shown a close correlation between adverse human health effects and exposure to ambient particulate matter (PM). The oxidative potential (OP) of ambient PM has been implicated in inducing toxic effects associated with PM exposure. In particular, reactive oxygen species (ROS), either bound to PM or generated by particulate components in vivo, substantially contribute to the OP and therefore toxicity of PM by lowering antioxidant concentrations in the lung, which can subsequently lead to oxidative stress, inflammation, and disease. Traditional methods for measuring aerosol OP are labor intensive and have poor time resolution, with significant delays between aerosol collection and ROS analysis. These methods may underestimate ROS concentrations in PM because of the potentially short lifetime of some ROS species; therefore, continuous online, highly time-resolved measurement of ROS components in PM is highly advantageous. In this work, we develop a novel online method for measuring aerosol OP based on ascorbic acid chemistry, an antioxidant prevalent in the lung, thus combining the advantages of continuous online measurement with a physiologically relevant assay. The method limit of detection is estimated for a range of atmospherically important chemical components such as Cu(II) 0.22 ± 0.03 µg m-3, Fe(II) 47.8 ± 5.5 µg m-3, Fe(III) 0.63 ± 0.05 µg m-3, and secondary organic aerosol 41.2 ± 6.9 µg m-3, demonstrating that even at this early stage of development, the online method is capable of measuring the OP of PM in polluted urban environments and smog chamber studies.

Oxidative Potential by PM2.5 in the North China Plain: Generation of Hydroxyl Radical.

Adverse health effects of ambient PM2.5 ( dp < 2.5 µm) can be associated with the production of reactive oxygen species (ROS), among which hydroxyl radical (•OH) is the most reactive. However, â€¢OH generated by PM2.5 has not been quantified and studied in the North China Plain (NCP), which has suffered from heavy air pollution in recent years. In this study, PM2.5 samples were collected at an urban site (Beijing) and a suburban site (Wangdu), extracted in a cell-free surrogate lung fluid (SLF), and •OH generated in the extracts were quantified. The results show that more •OH is produced on heavily polluted days than that on clean days (2.0 and 1.6 times higher in Beijing and Wangdu, respectively). The production of •OH per unit mass (ng/µg·PM2.5) decreases with the increase of ambient PM2.5 concentration because SO42-, NO3-, and NH4+ dominate the increased PM2.5, while these secondary inorganic components do not contribute to the generation of •OH. Trace metals (e.g., Fe, Cu, Se) and carbonaceous species (organic carbon and elemental carbon) correlate well with the •OH production, indicating that particles from combustion sources including coal combustion, vehicle exhaust, and industry contribute more to •OH generation.

Rapid Aqueous-Phase Hydrolysis of Ester Hydroperoxides Arising from Criegee Intermediates and Organic Acids.

Stabilized Criegee intermediates react with organic acids in the gas phase and at the air-water interface to form a class of ester hydroperoxides, α-acyloxyalkyl hydroperoxides (αAAHPs). A number of recent studies have proposed the importance of αAAHPs to the formation and growth of secondary organic aerosol (SOA). The chemistry of αAAHPs has not been investigated due to a lack of commercially available chemical standards. In this work, the behavior of αAAHPs in condensed phases is investigated for the first time. Experiments were performed with two synthesized αAAHP species. αAAHPs decomposed rapidly in the aqueous phase, with the rate highly dependent on the solvent, temperature, solution pH, and other compounds present in the solution. The measured 1st-order decomposition rate coefficient varied between 10-3 and 10-5 s-1 under the conditions examined in this work. Elucidation of the reaction mechanism is complicated by byproducts arising from the synthetic procedure, but observations are consistent with a base-catalyzed hydrolysis of αAAHPs. The rapid hydrolysis of αAAHPs observed in this work implies their short lifetimes in ambient cloud and fog waters. Decomposition of αAAHPs likely gives rise to smaller peroxides, such as H2O2. The loss of αAAHPs is also relevant to filter extraction, which is commonly practiced in laboratory experiments, potentially explaining contradictory results reported in the existing literature regarding the importance of αAAHPs in SOA.

Exploration of spatial patterns of congenital anomalies in Los Angeles County using the vital statistics birth master file.

Research has shown linkages between environmental exposures and population health metrics such as low birth weight and incidence of congenital anomalies. While the exact causal relationship between specific environmental teratogens and suspected corresponding congenital anomalies has largely not been established, spatial analysis of anomaly incidence can identify potential locations of increased risk. This study uses the Vital Statistics Birth Master File to map and analyze the rates of congenital anomalies of births from non-smoking mothers 15-35 years old within Los Angeles County. Hot spot analysis shows that the distribution of congenital anomalies is not randomly distributed throughout the county and identified the Antelope Valley and San Gabriel Foothills as two areas with elevated incidence rates. These results are not explained by potential confounders such as maternal age, race, smoking status, or socioeconomic status and seem to correlate well with the concentration of atmospheric ozone. This approach demonstrates the value of using spatial techniques to inform future research efforts and the need to establish and maintain a comprehensive reproductive health surveillance system.

HULIS Enhancement of Hydroxyl Radical Formation from Fe(II): Kinetics of Fulvic Acid-Fe(II) Complexes in the Presence of Lung Antioxidants.

Oxidative stress mediated by reactive oxygen species (ROS) is a hypothesized mechanism for particulate-matter related health effects. Fe(II) is a key player in ROS formation in surrogate lung fluid (SLF) containing antioxidants. Humic-like substances (HULIS) in particulate matter such as biomass burning aerosol chelate Fe(II), but the effect on ROS formation in the presence of lung antioxidants is not known. We use Suwanee River Fulvic Acid (SRFA) as a surrogate for HULIS and investigate its effect on OH formation from Fe(II). For the first time, a chemical kinetics model was developed to explain behavior of Fe(II) and SRFA in SLF. Model and experimental results are used to find best-fit rate coefficients for key reactions. Modeling results indicate SRFA enhances Fe-mediated reduction of O2 to O2- and destruction of H2O2 to OH to 5.1 ± 1.5 and (4.3 ± 1.4) × 103 M-1 s-1 respectively. Best-fit rates for Citrate-Fe(II) mediated O2 to O2- and H2O2 to OH were 3.0 ± 0.7 and (4.2 ± 1.7) × 103 M-1 s-1 respectively. The kinetics model agrees with both the experimental results and thermodynamic model calculations of chemical speciation for 0 and 5 µg/mL SRFA, but both models are less successful at predicting further enhancements to OH formation at higher SRFA Concentrations.

Robust quantification of the burst of OH radicals generated by ambient particles in nascent cloud droplets using a direct-to-reagent approach.

Reactive oxygen species (ROS) play a central role in chemistry in cloud water, as well as in other aqueous phases such as lung fluid and in wastewater treatment. Recently, work simulating nascent cloud droplets showed that aerosol particles produce a large burst of OH radicals when they first take up water. This activity stops abruptly, within two minutes. The source of the OH radicals is not well understood, but it likely includes the aqueous phase chemistry of ROS and/or organic hydroperoxides and redox active metals such as iron and copper. ROS and their precursors are in general highly reactive and labile, and thus may not survive during traditional sampling methods, which typically involve multi-hour collection on a filter or direct sampling into water or another collection liquid. Further, these species may further decay during storage. Here, we develop a technique to grow aerosol particles into small droplets and capture the droplets directly into a vial containing the terephthalate probe in water, which immediately scavenges OH radicals produced by aerosol particles. The method uses a Liquid Spot Sampler. Extensive characterization of the approach reveals that the collection liquid picks up substantial OH/OH precursors from the gas phase. This issue is effectively addressed by adding an activated carbon denuder. We then compared OH formation measured with the direct-to-reagent approach vs. filter collection. We find that after a modest correction for OH formed in the collection liquid, the samples collected into the reagent produce about six times those collected on filters, for both PM2.5 and total suspended particulate. This highlights the need for direct-to-reagent measurement approaches to accurately quantify OH production from ambient aerosol particles.

Fine Particulate Matter Metal Composition, Oxidative Potential, and Adverse Birth Outcomes in Los Angeles.

BACKGROUND: Although many studies have linked prenatal exposure to PM2.5 to adverse birth outcomes, little is known about the effects of exposure to specific constituents of PM2.5 or mechanisms that contribute to these outcomes. OBJECTIVES: Our objective was to investigate effects of oxidative potential and PM2.5 metal components from non-exhaust traffic emissions, such as brake and tire wear, on the risk of preterm birth (PTB) and term low birth weight (TLBW). METHODS: For a birth cohort of 285,614 singletons born in Los Angeles County, California, in the period 2017-2019, we estimated speciated PM2.5 exposures modeled from land use regression with cokriging, including brake and tire wear related metals (barium and zinc), black carbon, and three markers of oxidative potential (OP), including modeled reactive oxygen species based on measured iron and copper (ROS), OH formation (OPOH), and dithiothreitol (DTT) loss (OPDTT). Using logistic regression, we estimated odds ratios (OR) and 95% confidence intervals (CI) for PTB and TLBW with speciated PM2.5 exposures and PM2.5 mass as continuous variables scaled by their interquartile range (IQR). RESULTS: For both metals and oxidative potential metrics, we estimated increased risks for PTB (ORs ranging from 1.01 to 1.03) and TLBW (ORs ranging from 1.02 to 1.05) per IQR exposure increment that were robust to adjustment for PM2.5 mass. Associations for PM2.5 mass, black carbon, metal components, and oxidative potential (especially ROS and OPOH) with adverse birth outcomes were stronger in Hispanic, Black, and mixed-race or Native American women. DISCUSSION: Our results indicate that exposure to PM2.5 metals from brake and tire wear and particle components that contribute to oxidative potential were associated with an increased risk of PTB and TLBW in Los Angeles County, particularly among Hispanic, Black, and mixed-race or Native American women. Thus, reduction of PM2.5 mass only may not be sufficient to protect the most vulnerable pregnant women and children from adverse effects due to traffic source exposures. https://doi.org/10.1289/EHP12196.

Real refractive indices and formation yields of secondary organic aerosol generated from photooxidation of limonene and α-pinene: the effect of the HC/NO(x) ratio.

The refractive index is an important property affecting aerosol optical properties, which in turn help determine the aerosol direct effect and satellite retrieval results. Here, we investigate the real refractive indices (m(r)) of secondary organic aerosols (SOA) generated from the photooxidation of limonene and α-pinene with different HC/NO(x) ratios. Refractive indices were obtained from polar nephelometer data using parallel and perpendicular polarized 532 nm light combined with measured size distributions, and retrievals were performed using a genetic algorithm and Mie-Lorenz scattering theory. The absolute error associated with the m(r) retrieval is ±0.03, and reliable retrievals are possible for mass concentrations above 5-20 µg/m(3) depending on particle size. The limonene SOA data suggest the most important factor controlling the refractive index is the HC/NO(x) ratio; the refractive index is much less sensitive to the aerosol age or mass concentration. The refractive index ranges from about 1.34 to 1.56 for limonene and from 1.36 to 1.52 for α-pinene, and generally decreases as the HC/NO(x) ratio increases. Especially for limonene, the particle diameter is also inversely related to the HC/NO(x) ratio; the final size mode increases from 220 to 330 nm as the HC/NO(x) ratio decreases from 33 to 6. In an effort to explore the ability of models from the literature to explain the observed refractive indices, a recent limonene oxidation mechanism was combined with SOA partitioning and a structure-property relationship for estimating refractive indices of condensing species. The resulting refractive indices fell in a much narrower range (1.475 ± 0.02) of m(r) than observed experimentally. We hypothesize the experimentally observed high m(r) values are due to oligomerization and the low values to water uptake, small soluble molecules such as glyoxal and other factors, each of which is not included in the oxidation mechanism. Aerosol formation yields were measured over the mass concentration range from 6 to ∼150 µg/m(3), over which they increased steadily, and were higher for high HC/NO(x) ratio experiments.

Observation of Elevated Air Pollutant Concentrations in a Residential Neighborhood of Los Angeles California Using a Mobile Platform.

We observed elevated air pollutant concentrations, especially of ultrafine particles (UFP), black carbon (BC) and NO, across the residential neighborhood of the Boyle Heights Community (BH) of Los Angeles, California. Using an electric vehicle mobile platform equipped with fast response instruments, real-time air pollutant concentrations were measured in BH in spring and summer of 2008. Pollutant concentrations varied significantly in the two seasons, on different days, and by time of day, with an overall average UFP concentration in the residential areas of ~33 000 cm-3. The averaged UFP, BC, and NO concentrations measured on Soto St, a major surface street in BH, were 57 000 cm-3, 5.1 µg m-3, and 67 ppb, respectively. Concentrations of UFP across the residential areas in BH were nearly uniform spatially, in contrast to other areas in the greater metropolitan area of Los Angeles where UFP concentrations exhibit strong gradients downwind of roadways. We attribute this "UFP cloud" to high traffic volumes, including heavy duty diesel trucks on the freeways which surround and traverse BH, and substantial numbers of high-emitting vehicles (HEVs) on the surface streets traversing BH. Additionally, the high density of stop signs and lights and short block lengths, requiring frequent accelerations of vehicles, may contribute. The data also support a role for photochemical production of UFP in the afternoon. UFP concentration peaks (5 s average) of up to 9 million particles cm-3 were also observed immediately behind HEVs when they accelerated from stop lights in the BH neighborhood and areas immediately adjacent. Although encounters with HEV during mornings accounted for only about 6% and 17% of time spent monitoring residential areas and major surface streets, HEV contributed to about 28% and 53% of total ultrafine particles measured on the route, respectively. The observation of elevated pollutant number concentrations across the Boyle Heights community highlights how multiple factors combine to create high pollutant levels, and has important human exposure assessment implications, including the potential utility of our data as inputs to epidemiological studies.

Elemental composition of fine and coarse particles across the greater Los Angeles area: Spatial variation and contributing sources.

The inorganic components of particulate matter (PM), especially transition metals, have been shown to contribute to PM toxicity. In this study, the spatial distribution of PM elements and their potential sources in the Greater Los Angeles area were studied. The mass concentration and detailed elemental composition of fine (PM2.5) and coarse (PM2.5-10) particles were assessed at 46 locations, including urban traffic, urban community, urban background, and desert locations. Crustal enrichment factors (EFs), roadside enrichments (REs), and bivariate correlation analysis revealed that Ba, Cr, Cu, Mo, Pd, Sb, Zn, and Zr were associated with traffic emissions in both PM2.5 and PM2.5-10, while Fe, Li, Mn, and Ti were affected by traffic emissions mostly in PM2.5. The concentrations of Ba, Cu, Mo, Sb, Zr (brake wear tracers), Pd (tailpipe tracer), and Zn (associated with tire wear) were higher at urban traffic sites than urban background locations by factors of 2.6-4.6. Both PM2.5 and PM2.5-10 elements showed large spatial variations, indicating the presence of diverse emission sources across sampling locations. Principal component analysis extracted four source factors that explained 88% of the variance in the PM2.5 elemental concentrations, and three sources that explained 86% of the variance in the PM2.5-10 elemental concentrations. Based on multiple linear regression analysis, the contribution of traffic emissions (27%) to PM2.5 was found to be higher than mineral dust (23%), marine aerosol (18%), and industrial emissions (8%). On the other hand, mineral dust was the dominant source of PM2.5-10 with 45% contribution, followed by marine aerosol (22%), and traffic emissions (19%). This study provides novel insight into the spatial variation of traffic-related elements in a large metropolitan area.

Effects of albumin, transferrin and humic-like substances on iron-mediated OH radical formation in human lung fluids.

Inhalation of particulate matter is hypothesized to contribute to health effects by overproducing reactive oxygen species (ROS) and inducing oxidative stress. Fe(II) has been shown to contribute to ROS generation in acellular simulated lung fluids. Atmospheric humic-like substances (HULIS) have been shown to chelate Fe(II) and significantly enhance this ROS generation. Here, we investigate Fe(II)-mediated .OH generation from the iron active proteins in lung fluid, albumin and transferrin, and fulvic acid, a surrogate for HULIS, in human bronchoalveolar lavage fluid (BALF). We find that albumin enhances .OH generation from inorganic Fe(II) and that transferrin attenuates this enhancement. We estimate the rate constants for albumin-Fe(II) and fulvic acid-Fe(II) mediated O2.- reduction (1.9 ± 0.3) M-1 s-1 and (2.7 ± 0.3) M-1s-1 (pH = 5.5, T = 37 °C), 17-25 times the rate for free iron, which we measured to be (110 ± 20) × 10-3 M-1s-1, in agreement with the literature. .OH generation measured from fulvic acid-Fe(II) in BALF from 8 individuals with added fulvic acid is successfully predicted rates of .OH generation by mixtures of Fe(II), albumin, transferrin, fulvic acid, and ascorbate in saline solution. This indicates that fulvic acid enhances .OH formation in BALF, and that albumin and transferrin in BALF moderate the effect. We propose that fulvic acid, and thereby HULIS, is capable of mobilizing Fe(II) away from albumin and transferrin and this increases the formation rate of O2.- and ultimately of .OH. Furthermore, we find that albumin and transferrin have significantly different impacts on Fe(II)-mediated .OH than citrate, a common component of simulated lung fluids, a factor that should be considered carefully in the interpretation of results obtained from solutions containing citrate.

Ascorbate oxidation by iron, copper and reactive oxygen species: review, model development, and derivation of key rate constants.

Ascorbic acid is among the most abundant antioxidants in the lung, where it likely plays a key role in the mechanism by which particulate air pollution initiates a biological response. Because ascorbic acid is a highly redox active species, it engages in a far more complex web of reactions than a typical organic molecule, reacting with oxidants such as the hydroxyl radical as well as redox-active transition metals such as iron and copper. The literature provides a solid outline for this chemistry, but there are large disagreements about mechanisms, stoichiometries and reaction rates, particularly for the transition metal reactions. Here we synthesize the literature, develop a chemical kinetics model, and use seven sets of laboratory measurements to constrain mechanisms for the iron and copper reactions and derive key rate constants. We find that micromolar concentrations of iron(III) and copper(II) are more important sinks for ascorbic acid (both AH2 and AH-) than reactive oxygen species. The iron and copper reactions are catalytic rather than redox reactions, and have unit stoichiometries: Fe(III)/Cu(II) + AH2/AH- + O2 → Fe(III)/Cu(II) + H2O2 + products. Rate constants are 5.7 × 104 and 4.7 × 104 M-2 s-1 for Fe(III) + AH2/AH- and 7.7 × 104 and 2.8 × 106 M-2 s-1 for Cu(II) + AH2/AH-, respectively.

A Wide Area of Air Pollutant Impact Downwind of a Freeway during Pre-Sunrise Hours.

We have observed a wide area of air pollutant impact downwind of a freeway during pre-sunrise hours in both winter and summer seasons. In contrast, previous studies have shown much sharper air pollutant gradients downwind of freeways, with levels above background concentrations extending only 300 m downwind of roadways during the day and up to 500 m at night. In this study, real-time air pollutant concentrations were measured along a 3 600 m transect normal to an elevated freeway 1-2 hours before sunrise using an electric vehicle mobile platform equipped with fast-response instruments. In winter pre-sunrise hours, the peak ultrafine particle (UFP) concentration (~95 000 cm-3) occurred immediately downwind of the freeway. However, downwind UFP concentrations as high as ~ 40 000 cm-3 extended at least 1 200 m from the freeway, and did not reach background levels (~15 000 cm-3) until a distance of about 2 600 m. UFP concentrations were also elevated over background levels up to 600 m upwind of the freeway. Other pollutants, such as NO and particle-bound polycyclic aromatic hydrocarbons, exhibited similar long-distance downwind concentration gradients. In contrast, air pollutant concentrations measured on the same route after sunrise, in the morning and afternoon, exhibited the typical daytime downwind decrease to background levels within ~300 m as found in earlier studies. Although pre-sunrise traffic volumes on the freeway were much lower than daytime congestion peaks, downwind UFP concentrations were significantly higher during pre-sunrise hours than during the daytime; UFP and NO concentrations were also strongly correlated with traffic counts on the freeway. We associate these elevated pre-sunrise concentrations over a wide area with a nocturnal surface temperature inversion, low wind speeds, and high relative humidity. Observation of a wide air pollutant impact area downwind of a major roadway prior to sunrise has important exposure assessment implications since it demonstrates extensive roadway impacts on residential areas during pre-sunrise hours, when most people are at home.

A light-driven burst of hydroxyl radicals dominates oxidation chemistry in newly activated cloud droplets.

Aerosol particles and their interactions with clouds are one of the most uncertain aspects of the climate system. Aerosol processing by clouds contributes to this uncertainty, altering size distributions, chemical composition, and radiative properties. Many changes are limited by the availability of hydroxyl radicals in the droplets. We suggest an unrecognized potentially substantial source of OH formation in cloud droplets. During the first few minutes following cloud droplet formation, the material in aerosols produces a near-UV light-dependent burst of hydroxyl radicals, resulting in concentrations of 0.1 to 3.5 micromolar aqueous OH ([OH]aq). The source of this burst is previously unrecognized chemistry between iron(II) and peracids. The contribution of the "OH burst" to total OH in droplets varies widely, but it ranges up to a factor of 5 larger than previously known sources. Thus, this new process will substantially enhance the impact of clouds on aerosol properties.