Ion-exchanged glass microrods as hybrid SERS/fluorescence substrates for molecular beacon-based DNA detection.

Ion-exchange in molten nitrate salts containing metal ions (i.e. silver, copper, etc.) represents a well-established technique able to modify the chemical-physical properties of glass materials. It is widely used not only in the field of integrated optics (IO) but also, more recently, in plasmonics due to the possibility to induce the formation of metal nanoparticles in the glass matrix by an ad hoc thermal post-process. In this work, the application of this technology for the realisation of low-cost and stable surface-enhanced Raman scattering (SERS) active substrates, based on soda-lime glass microrods, is reported. The microrods, with a radius of a few tens of microns, were obtained by cutting the end of an ion-exchanged soda-lime fibre for a length less than 1 cm. As ion source, silver nitrate was selected due to the outstanding SERS properties of silver. The ion-exchange and thermal annealing post-process parameters were tuned to expose the embedded silver nanoparticles on the surface of the glass microrods, avoiding the use of any further chemical etching step. In order to test the combined SERS/fluorescence response of these substrates, labelled molecular beacons (MBs) were immobilised on their surface for deoxyribonucleic acid (DNA) detection. Our experiments confirm that target DNA is attached on the silver nanoparticles and its presence is revealed by both SERS and fluorescence measurements. These results pave the way towards the development of low-cost and stable hybrid fibres, in which SERS and fluorescence interrogation techniques are combined in the same optical device.

TiO2 nanoparticles in a biosolid-amended soil and their implication in soil nutrients, microorganisms and Pisum sativum nutrition.

The wide use of nanoparticles (NPs), gives concern about their possible negative implications in the environment and living organisms. In particular, titanium dioxide (TiO2) NPs are accumulated in biosolids (Bs) coming from wastewater treatment plants, which in turn are used as farm soil amendments and are becoming an important way of NPs entrance in the terrestrial ecosystems. In this study, to simulate a low and cumulative load of TiO2 NPs, 80 and 800 mg TiO2per Kg of soil were spiked in the Bs prior to its addition to soil. The effects of different crystal phases of TiO2 NPs (pure anatase and pure rutile or their mixture) and their non-coated bulk counterparts (larger particles) on the availability of mineral nutrients and on the status of the bacterial communities together with the nutritional status of Pisum sativum L. plants were evaluated. Results showed the reduction, to different extents, on the availability of important soil mineral nutrients (e.g. Mn 65%, Fe 20%, P 27%, averagely), in some cases size- (e.g. P) and dose-dependent. Bacterial biodiversity was also affected by the presence of high TiO2 dose in soil. The mineral nutrition of pea plants was also altered, showing the main reduction in Mn (80% in the roots and 50% in the shoots), K, Zn, P (respectively, 80, 40, and 35% in the roots), and an increase of N in the shoots, with possible consequences on the quality of the crop. The present study gives new integrated data on the effects of TiO2 NPs in the soil-plant system, on the soil health and on the nutritional quality of crops, rising new implications for future policies and human health.

Nanoscale Discrimination between Toxic and Nontoxic Protein Misfolded Oligomers with Tip-Enhanced Raman Spectroscopy.

Highly toxic protein misfolded oligomers associated with neurological disorders such as Alzheimer's and Parkinson's diseases are nowadays considered primarily responsible for promoting synaptic failure and neuronal death. Unraveling the relationship between structure and neurotoxicity of protein oligomers appears pivotal in understanding the causes of the pathological process, as well as in designing novel diagnostic and therapeutic strategies tuned toward the earliest and presymptomatic stages of the disease. Here, it is benefited from tip-enhanced Raman spectroscopy (TERS) as a surface-sensitive tool with spatial resolution on the nanoscale, to inspect the spatial organization and surface character of individual protein oligomers from two samples formed by the same polypeptide sequence and different toxicity levels. TERS provides direct assignment of specific amino acid residues that are exposed to a large extent on the surface of toxic species and buried in nontoxic oligomers. These residues, thanks to their outward disposition, might represent structural factors driving the pathogenic behavior exhibited by protein misfolded oligomers, including affecting cell membrane integrity and specific signaling pathways in neurodegenerative conditions.

Polylysine as a functional biopolymer to couple gold nanorods to tumor-tropic cells.

BACKGROUND: The delivery of plasmonic particles, such as gold nanorods, to the tumor microenvironment has attracted much interest in biomedical optics for topical applications as the photoacoustic imaging and photothermal ablation of cancer. However, the systemic injection of free particles still crashes into a complexity of biological barriers, such as the reticuloendothelial system, that prevent their efficient biodistribution. In this context, the notion to exploit the inherent features of tumor-tropic cells for the creation of a Trojan horse is emerging as a plausible alternative. RESULTS: We report on a convenient approach to load cationic gold nanorods into murine macrophages that exhibit chemotactic sensitivity to track gradients of inflammatory stimuli. In particular, we compare a new model of poly-L-lysine-coated particles against two alternatives of cationic moieties that we have presented elsewhere, i.e. a small quaternary ammonium compound and an arginine-rich cell-penetrating peptide. Murine macrophages that are exposed to poly-L-lysine-coated gold nanorods at a dosage of 400 µM Au for 24 h undertake efficient uptake, i.e. around 3 pg Au per cell, retain the majority of their cargo until 24 h post-treatment and maintain around 90% of their pristine viability, chemotactic and pro-inflammatory functions. CONCLUSIONS: With respect to previous models of cationic coatings, poly-L-lysine is a competitive solution for the preparation of biological vehicles of gold nanorods, especially for applications that may require longer life span of the Trojan horse, say in the order of 24 h. This biopolymer combines the cost-effectiveness of small molecules and biocompatibility and efficiency of natural peptides and thus holds potential for translational developments.

ESPRESSO: A novel device for laser-assisted surgery of the anterior eye segment.

INTRODUCTION: Merging robotics with laser eye surgery could enhance precision, repeatability and automation. During some eye laser procedures the patient is awake, thus eye stabilization is desired to avoid movements that could affect the treatment. MATERIAL AND METHODS: The ESPRESSO platform has a two-stage actuation system to position a stabilization tool on the eye, a proximity sensing unit to monitor the stabilization tool position, and a sensing unit to monitor the pressure exerted on the eye. The platform is tested in-vitro and ex-vivo with clinicians. A maximum pressure to be exerted on the eye is defined with expert ophthalmic surgeons to be 22 mmHg: physiological intraocular pressure (IOP) range is 10-21 mmHg. This pressure corresponds to a force of 0.3 N. RESULTS: The necessary contact force to have eye fixation (according to the clinicians' feedback) is evaluated: maximum values resulted always below 0.3 N. A maximum IOP increase of 4.67 mmHg is observed, that is a slight variation with respect to the performance of other platforms (IOP elevations up to 328 mmHg). CONCLUSION: Design and initial assessment of the platform is presented. Eye stabilization is performed without exceeding the critical contact force value and causing large/sudden IOP increases.

In vitro assessment of antibody-conjugated gold nanorods for systemic injections.

BACKGROUND: The interest for gold nanorods in biomedical optics is driven by their intense absorbance of near infrared light, their biocompatibility and their potential to reach tumors after systemic administration. Examples of applications include the photoacoustic imaging and the photothermal ablation of cancer. In spite of great current efforts, the selective delivery of gold nanorods to tumors through the bloodstream remains a formidable challenge. Their bio-conjugation with targeting units, and in particular with antibodies, is perceived as a hopeful solution, but the complexity of living organisms complicates the identification of possible obstacles along the way to tumors. RESULTS: Here, we present a new model of gold nanorods conjugated with anti-cancer antigen 125 (CA125) antibodies, which exhibit high specificity for ovarian cancer cells. We implement a battery of tests in vitro, in order to simulate major nuisances and predict the feasibility of these particles for intravenous injections. We show that parameters like the competition of free CA125 in the bloodstream, which could saturate the probe before arriving at the tumors, the matrix effect and the interference with erythrocytes and phagocytes are uncritical. CONCLUSIONS: Although some deterioration is detectable, anti-CA125-conjugated gold nanorods retain their functional features after interaction with blood tissue and so represent a powerful candidate to hit ovarian cancer cells.

In vivo laser assisted microvascular repair and end-to-end anastomosis by means of indocyanine green-infused chitosan patches: a pilot study.

BACKGROUND AND OBJECTIVES: Laser-based repairing techniques offer several advantages respect to standard suturing in microsurgery. In this work we evaluate the applicability and feasibility of two innovative laser-based approaches for microvascular repair and anastomoses: (1) laser-assisted vascular repair (LAVR); (2) laser-assisted end-to-end vascular anastomosis (LAVA). All these procedures have been executed by the use of diode laser irradiation and chitosan-patches infused with Indocyanine Green (ICG). STUDY DESIGN/MATERIALS AND METHODS: Experiments were performed on 30 rabbits. Twenty animals underwent LAVR and 10 end-to-end LAVA procedures. In the LAVR group, a 5-mm longitudinal cut was performed on the common carotid artery (CCA), then an ICG-infused chitosan patch was topically applied and laser-soldered over the arterial lesion. In the LAVA group the end-to-end anastomosis was executed on CCA by means of application of the three interrupted sutures and subsequent laser soldering of the ICG-infused patch. Animals underwent different follow-up periods (2, 7, 30, and 90 days). At the end of every follow-up, the animals were re-anesthetized and a microdoppler analysis was performed in order to check patency of the treated vessels. Then soldered segments were excised and subjected to histological and ultrastructural evaluations. RESULTS: At the end of surgery no bleeding from the treated segment was observed; all the treated vessels were patent. At the end of follow-up periods, no signs of perivascular haemorrhage were found. An intraoperative microdoppler evaluation assessed the patency of all the treated vessels. Histology showed a good reorganization of the vascular wall structures and an early endothelial regeneration was observed by SEM. CONCLUSIONS: Our study demonstrated the efficacy of laser tissue soldering by means of ICG-infused chitosan patches for the in vivo repairing of microvascular lesions and end-to-end anastomoses. This approach offers several advantages over conventional suturing methods and is technically easy to perform, minimizing the surgical trauma to vessels.

Photothermally activated hybrid films for quantitative confined release of chemical species.

Illuminating films of a porous chitosan matrix containing gold nanorods and thermosensitive micelles loaded with a chemical stimulates local photothermal conversion of the gold nanorods. The heat produced activates the ejection of the chemical from the micelles (see scheme), and causes the transient permeabilization of adjacent cell membranes, resulting in a selective cellular uptake of the released chemical with control over spatiotemporal parameters and dosage.

Response to Hypersalinity of Four Halophytes Growing in Hydroponic Floating Systems: Prospects in the Phytomanagement of High Saline Wastewaters and Extreme Environments.

Hypersaline environments occur naturally worldwide in arid and semiarid regions or in artificial areas where the discharge of highly saline wastewaters, such as produced water (PW) from oil and gas industrial setups, has concentrated salt (NaCl). Halophytes can tolerate high NaCl concentrations by adopting ion extrusion and inclusion mechanisms at cell, tissue, and organ levels; however, there is still much that is not clear in the response of these plants to salinity and completely unknown issues in hypersaline conditions. Mechanisms of tolerance to saline and hypersaline conditions of four different halophytes (Suaeda fruticosa (L.) Forssk, Halocnemum strobilaceum (Pall.) M. Bieb., Juncus maritimus Lam. and Phragmites australis (Cav.) Trin. ex Steudel) were assessed by analysing growth, chlorophyll fluorescence and photosynthetic pigment parameters, nutrients, and sodium (Na) uptake and distribution in different organs. Plants were exposed to high saline (257 mM or 15 g L-1 NaCl) and extremely high or hypersaline (514, 856, and 1712 mM or 30, 50, and 100 g L-1 NaCl) salt concentrations in a hydroponic floating culture system for 28 days. The two dicotyledonous S. fruticosa and H. strobilaceum resulted in greater tolerance to hypersaline concentrations than the two monocotyledonous species J. maritimus and P. australis. Plant biomass and major cation (K, Ca, and Mg) distributions among above- and below-ground organs evidenced the osmoprotectant roles of K in the leaves of S. fruticosa, and of Ca and Mg in the leaves and stem of H. strobilaceum. In J. maritimus and P. australis the rhizome modulated the reduced uptake and translocation of nutrients and Na to shoot with increasing salinity levels. S. fruticosa and H. strobilaceum absorbed and accumulated elevated Na amounts in the aerial parts at all the NaCl doses tested, with high bioaccumulation (from 0.5 to 8.3) and translocation (1.7-16.2) factors. In the two monocotyledons, Na increased in the root and rhizome with the increasing concentration of external NaCl, dramatically reducing the growth in J. maritimus at both 50 and 100 g L-1 NaCl and compromising the survival of P. australis at 30 g L-1 NaCl and over after two weeks of treatment.

Thermal transitions of fibrillar collagen unveiled by second-harmonic generation microscopy of corneal stroma.

The thermal transitions of fibrillar collagen are investigated with second-harmonic generation polarization anisotropy microscopy. Second-harmonic generation images and polarization anisotropy profiles of corneal stroma heated in the 35-80°C range are analyzed by means of a theoretical model that is suitable to probe principal intramolecular and interfibrillar parameters of immediate physiological interest. Our results depict the tissue modification with temperature as the interplay of three destructuration stages at different hierarchical levels of collagen assembly including its tertiary structure and interfibrillar alignment, thus supporting and extending previous findings. This method holds the promise of a quantitative inspection of fundamental biophysical and biochemical processes and may find future applications in real-time and postsurgical functional imaging of collagen-rich tissues subjected to thermal treatments.

Urban conditions affect soil characteristics and physiological performance of three evergreen woody species.

Physiological studies conducted mainly in metropolitan areas demonstrated that urban environments generate stressful conditions for plants. However, less attention has been paid to plant response to urban conditions in small cities. Here, we evaluated to what extent the health and physiological functions of some Mediterranean urban species [Quercus ilex L., Nerium oleander L. and Pittosporum tobira (Thunb.) W.T. Aiton] were impacted by urban and peri-urban conditions in Pisa (Italy), a small medieval city with narrow streets that impede efficient public transport causing oversized private transport. Experimental period spanned from late-summer to winter in concomitance with the sharp increase in air pollutants. Climate and air quality, soil physical and chemical properties, and plant physiological traits including leaf gas exchanges, chlorophyll fluorescence and leaf pigments were assessed. In soil, the organic carbon affected aggregates and water stability and the concentrations of some micro-elements decreased in winter. Air pollutants impaired leaf gas exchanges and photochemical processes at photosystem II, depending on species, season, and urban conditions. Shrubs were more susceptible than the tree species, highlighting that the latter adapted better to pollutants along an urban-peri-urban transect in Mediterranean environments. This study gives information on the physiological adaptability of some of the most frequent Mediterranean urban species to stressful conditions and demonstrated that, even in a small city, urban conditions influence the physiology and development of vegetation, affecting the plant health status and its ability to provide key ecosystem services.

Cyanine-Doped Nanofiber Mats for Laser Tissue Bonding.

In spite of an extensive body of academic initiatives and innovative products, the toolkit of wound dressing has always revolved around a few common concepts such as adhesive patches and stitches and their variants. Our work aims at an alternative solution for an immediate restitutio ad integrum of the mechanical functionality in cutaneous repairs. We describe the fabrication and the application of electrospun mats of bioactive nanofibers all made of biocompatible components such as a natural polysaccharide and a cyanine dye for use as laser-activatable plasters, resembling the ultrastructure of human dermis. In particular, we investigate their morphological features and mechanical moduli under conditions of physiological relevance, and we test their use to bind a frequent benchmark of connective tissue as rabbit tendon and a significant case of clinical relevance as human dermis. Altogether, our results point to the feasibility of a new material for wound dressing combining translational potential, strength close to human dermis, extensibility exceeding 15% and state-of-art adhesive properties.

Paper-based genetic assays with bioconjugated gold nanorods and an automated readout pipeline.

Paper-based biosensors featuring immunoconjugated gold nanoparticles have gained extraordinary momentum in recent times as the platform of choice in key cases of field applications, including the so-called rapid antigen tests for SARS-CoV-2. Here, we propose a revision of this format, one that may leverage on the most recent advances in materials science and data processing. In particular, we target an amplifiable DNA rather than a protein analyte, and we replace gold nanospheres with anisotropic nanorods, which are intrinsically brighter by a factor of ~ 10, and multiplexable. By comparison with a gold-standard method for dot-blot readout with digoxigenin, we show that gold nanorods entail much faster and easier processing, at the cost of a higher limit of detection (from below 1 to 10 ppm in the case of plasmid DNA containing a target transgene, in our current setup). In addition, we test a complete workflow to acquire and process photographs of dot-blot membranes with custom-made hardware and regression tools, as a strategy to gain more analytical sensitivity and potential for quantification. A leave-one-out approach for training and validation with as few as 36 sample instances already improves the limit of detection reached by the naked eye by a factor around 2. Taken together, we conjecture that the synergistic combination of new materials and innovative tools for data processing may bring the analytical sensitivity of paper-based biosensors to approach the level of lab-grade molecular tests.

Blue-LED-Light Photobiomodulation of Inflammatory Responses and New Tissue Formation in Mouse-Skin Wounds.

Background: Recent studies evidence that blue-LED-light irradiation can modulate cell responses in the wound healing process within 24 h from treatment. This study aims to investigate blue-light (410-430 nm) photobiomodulation used in a murine wound model within six days post-treatment. Methods: A superficial wound was made in 30 CD1 male mice. The injuries were treated with a blue LED light (20.6 J/cm2), and biopsies were collected at 24, 72, and 144 h. Histology, fluorescence analysis, and advanced microscopy techniques were used. Results: We can observe an increase in the cellular infiltrate response, and in mast-cell density and their degranulation index correlated to the expression of the major histocompatibility complex after 24 h. Furthermore, after six days, the vessel density increases with the expression of the platelet-derived growth factor in the mast cells. Finally, collagen deposition and morphology in the treated wounds appear more similar to unwounded skin. Conclusions: Blue-light photobiomodulation stimulates several cellular processes that are finely coordinated by mast cells, leading to more rapid wound healing and a better-recovered skin morphology.

Application of ultrafast gold luminescence to measuring the instrument response function for multispectral multiphoton fluorescence lifetime imaging.

When performing multiphoton fluorescence lifetime imaging in multiple spectral emission channels, an instrument response function must be acquired in each channel if accurate measurements of complex fluorescence decays are to be performed. Although this can be achieved using the reference reconvolution technique, it is difficult to identify suitable fluorophores with a mono-exponential fluorescence decay across a broad emission spectrum. We present a solution to this problem by measuring the IRF using the ultrafast luminescence from gold nanorods. We show that ultrafast gold nanorod luminescence allows the IRF to be directly obtained in multiple spectral channels simultaneously across a wide spectral range. We validate this approach by presenting an analysis of multispectral autofluorescence FLIM data obtained from human skin ex vivo.

Photostability of Contrast Agents for Photoacoustics: The Case of Gold Nanorods.

Plasmonic particles as gold nanorods have emerged as powerful contrast agents for critical applications as the photoacoustic imaging and photothermal ablation of cancer. However, their unique efficiency of photothermal conversion may turn into a practical disadvantage, and expose them to the risk of overheating and irreversible photodamage. Here, we outline the main ideas behind the technology of photoacoustic imaging and the use of relevant contrast agents, with a main focus on gold nanorods. We delve into the processes of premelting and reshaping of gold nanorods under illumination with optical pulses of a typical duration in the order of few ns, and we present different approaches to mitigate this issue. We undertake a retrospective classification of such approaches according to their underlying, often implicit, principles as: constraining the initial shape; or speeding up their thermal coupling to the environment by lowering their interfacial thermal resistance; or redistributing the input energy among more particles. We discuss advantages, disadvantages and contexts of practical interest where one solution may be more appropriate than the other.

Cost Effective Silver Nanowire-Decorated Graphene Paper for Drop-On SERS Biodetection.

The use of SERS for real-world bioanalytical applications represents a concrete opportunity, which, however, is being largely delayed by the inadequacy of existing substrates used to collect SERS spectra. In particular, the main bottleneck is their poor usability, as in the case of unsupported noble metal colloidal nanoparticles or because of the need for complex or highly specialized fabrication procedures, especially in view of a large-scale commercial diffusion. In this work, we introduce a graphene paper-supported plasmonic substrate for biodetection as obtained by a simple and rapid aerosol deposition patterning of silver nanowires. This substrate is compatible with the analysis of small (2 µL) analyte drops, providing stable SERS signals at sub-millimolar concentration and a detection limit down to the nanogram level in the case of hemoglobin. The presence of a graphene underlayer assures an even surface distribution of SERS hotspots with improved stability of the SERS signal, the collection of well-resolved and intense SERS spectra, and an ultra-flat and photostable SERS background in comparison with other popular disposable supports.

Ficoll as testing material for diffusion weighted imaging-quality assurance phantoms.

PURPOSE: The aim of this work is to test the use of aqueous solutions of Ficoll®**, a highly branched polymer displaying crowding properties, to build a phantom suitable for Diffusion Weighted Imaging (DWI) in Magnetic Resonance Imaging (MRI). METHODS: We developed a test object made of a cylindrical plastic container with a precise geometrical arrangement suitable for measuring several samples at the same time. The container was designed to host single vials with variable geometry and number, and to fit inside common commercial head coils for MRI scanners. In our experiments, vials were filled with 8 aqueous solutions of Ficoll 70 and Ficoll 400 spanning a range of polymer concentration from 5 to 30% by weight. Vials containing ultra-pure water were also used as reference. Experiments were performed on both 1.5 and 3 T clinical scanners (GE, Philips and Siemens), under the conditions of a standard clinical examination. RESULTS: The geometry of the phantom provided reduced imaging artifacts, especially image distortions at magnetic interfaces. We found that the Apparent Diffusion Coefficient (ADC) varied in the range of 0.00125-0.00223 mm2/s and decreased with Ficoll concentration. ADC vs Ficoll concentration exhibited a linear trend. Results were consistent over time and among different MRI clinical scanners, showing an average variability of 3% at 1.5 T and of 7.5% at 3 T. Moreover, no substantial difference was found between Ficoll 70 and 400. By varying Ficoll concentration, ADC can be modulated to approach tissue-mimicking values. Preliminary results for relaxation measurements proved that both T1 and T2 decreased with Ficoll concentration in the ranges 1.3-2.4 s and 150-800 ms respectively. CONCLUSIONS: In this work, we propose a 3D phantom design based on the widespread crowding agent Ficoll, which is suitable for DWI quality assurance purposes in MRI acquisitions. Aqueous Ficoll solutions provide good performance in terms of stability, ease of preparation, and safety.

Characterization and Ex Vivo Application of Indocyanine Green Chitosan Patches in Dura Mater Laser Bonding.

Dura mater repair represents a final and crucial step in neurosurgery: an inadequate dural reconstruction determines dreadful consequences that significantly increase morbidity and mortality rates. Different dural substitutes have been used with suboptimal results. To overcome this issue, in previous studies, we proposed a laser-based approach to the bonding of porcine dura mater, evidencing the feasibility of the laser-assisted procedure. In this work, we present the optimization of this approach in ex vivo experiments performed on porcine dura mater. An 810-nm continuous-wave AlGaAs (Aluminium Gallium Arsenide) diode laser was used for welding Indocyanine Green-loaded patches (ICG patches) to the dura. The ICG-loaded patches were fabricated using chitosan, a resistant, pliable and stable in the physiological environment biopolymer; moreover, their absorption peak was very close to the laser emission wavelength. Histology, thermal imaging and leak pressure tests were used to evaluate the bonding effect. We demonstrated that the application of 3 watts (W), pulsed mode (Ton 30 ms, Toff 3.5 ms) laser light induces optimal welding of the ICG patch to the dura mater, ensuring an average fluid leakage pressure of 216 ± 105 mmHg, falling within the range of physiological parameters. This study demonstrated that the thermal effect is limited and spatially confined and that the laser bonding procedure can be used to close the dura mater. Our results showed the effectiveness of this approach and encourage further experiments in in vivo models.