Author Correction: Photoredox catalysis using infrared light via triplet fusion upconversion.

In Fig. 1c of this Letter, the orange axis label of the graph should have read 'FDPP upconversion photoluminescence (AU)' instead of 'TTBP upconversion photoluminescence (AU)'. This has been corrected online.

Photoredox catalysis using infrared light via triplet fusion upconversion.

Recent advances in photoredox catalysis have made it possible to achieve various challenging synthetic transformations, polymerizations and surface modifications1-3. All of these reactions require ultraviolet- or visible-light stimuli; however, the use of visible-light irradiation has intrinsic challenges. For example, the penetration of visible light through most reaction media is very low, leading to problems in large-scale reactions. Moreover, reactants can compete with photocatalysts for the absorption of incident light, limiting the scope of the reactions. These problems can be overcome by the use of near-infrared light, which has a much higher penetration depth through various media, notably biological tissue4. Here we demonstrate various photoredox transformations under infrared radiation by utilizing the photophysical process of triplet fusion upconversion, a mechanism by which two low-energy photons are converted into a higher-energy photon. We show that this is a general strategy applicable to a wide range of photoredox reactions. We tune the upconversion components to adjust the output light, accessing both orange light and blue light from low-energy infrared light, by pairwise manipulation of the sensitizer and annihilator. We further demonstrate that the annihilator itself can be used as a photocatalyst, thus simplifying the reaction. This approach enables catalysis of high-energy transformations through several opaque barriers using low-energy infrared light.

Silver-doped CdSe magic-sized nanocrystals.

Magic-sized nanocrystals (MSNCs) grow via jumps between very specific sizes. This discrete growth is a possible avenue toward monodisperse nanomaterials that are completely identical in size and shape. In spite of this potential, MSNCs have seen limited study and application due to their poor optical properties. Specifically, MSNCs are limited in their range of emission wavelengths and commonly exhibit poor photoluminescence quantum yields (PLQYs). Here, we report silver doping of CdSe MSNCs as a strategy to improve the optical properties of MSNCs. Silver doping leads to controllable shifts in emission wavelength and significant increases in MSNC PLQYs. These results suggest that doped MSNCs are interesting candidates for displays or luminescent solar concentrators. Finally, we demonstrate that the doping process does not affect the magic size of our MSNCs, allowing further photophysical study of this class of nanomaterial.

Understanding Discrete Growth in Semiconductor Nanocrystals: Nanoplatelets and Magic-Sized Clusters.

ConspectusSemiconductor nanocrystals (NCs) fluoresce with a color that strongly depends on their size and shape. Thus, to obtain homogeneous optical properties, researchers have strived to synthesize particles that are uniform. However, because NCs typically grow through continuous, incremental addition of material, slight differences in the growth process between individual crystallites yield statistical distributions in size and shape, leading to inhomogeneities in their optical characteristics. Much work has focused on improving synthetic protocols to control these distributions and enhance performance. Interestingly, during these efforts, several syntheses were discovered that exhibit a different type of growth process. The NCs jump from one discrete size to the next. Through purification methods, one of these sizes can then be isolated, providing a different approach to uniform NCs. Unfortunately, the fundamental mechanism behind such discrete growth and how it differs from the conventional continuous process have remained poorly understood.Discrete growth has been observed in two major classes of NCs: semiconductor nanoplatelets (NPLs) and magic-sized clusters (MSCs). NPLs are quasi-two-dimensional crystallites that exhibit a precise thickness of only a few atomic layers but much larger lateral dimensions. During growth, NPLs slowly appear with an increasing number of monolayers. By halting this process at a specific time, NPLs with a desired thickness can then be isolated (e.g., four monolayers). Because the optical properties are primarily governed by this thickness, which is uniform, NPLs exhibit improved optical properties such as narrower fluorescence line widths.While NPLs have highly anisotropic shapes and show discrete growth only in one dimension (thickness), MSCs are isotropic particles. The name "magic" arose because a specific set of NC sizes appear during synthesis. They have been believed to represent special atomic arrangements that possess enhanced structural stability. Historically, they were very small, hence molecular-scale "clusters." Isolation of one of the MSC sizes can then, in principle, provide a uniform sample of NCs. More recently, MSC growth has been extended to larger sizes, beyond what is commonly considered to be the "cluster" regime, challenging the conventional explanation for these materials.This Account summarizes recent work by our group to understand the mechanism that governs discrete growth in semiconductor NCs. We begin by describing the synthesis of NPLs. Next, we discuss the mechanism behind the highly anisotropic shape of NPLs. We build on this by examining the ripening process in NPLs. We show that NPLs slowly appear with increasing thickness, counterintuitively through lateral growth. Then, we turn to the synthesis of MSCs, in particular focusing on their growth mechanism. Our findings indicate a strong connection between NPLs and MSCs. Finally, we review several remaining challenges for the growth of NPLs and MSCs and give a brief outlook on the future of discrete growth. By understanding the underlying process, we believe that it can be exploited more broadly, potentially moving us toward more uniform nanomaterials.

Core/Shell Magic-Sized CdSe Nanocrystals.

Magic-sized semiconductor nanocrystals (MSNCs) grow via discrete jumps between specific sizes. Despite their potential to offer atomically precise structures, their use has been limited by poor stability and trap-dominated photoluminescence. Recently, CdSe MSNCs have been grown to larger sizes. We exploit such particles and demonstrate a method to grow shells on CdSe MSNC cores via high-temperature synthesis. Thin CdS shells lead to dramatic improvements in the emissive properties of the MSNCs, narrowing their fluorescence line widths, enhancing photoluminescence quantum yields, and eliminating trap emission. Although thicker CdS shells lead to decreased performance, CdxZn1-xS alloyed shells maintain efficient and narrow emission lines. These alloyed core/shell crystallites exhibit a tetrahedral shape, in agreement with a recent model for MSNC growth. Our results indicate that MSNCs can compete with other state-of-the-art semiconductor nanocrystals. Furthermore, these core/shell structures will allow further study of MSNCs and their potential for atomically precise growth.

Bridge Resonance Effects in Singlet Fission.

A major benefit of intramolecular singlet fission (iSF) materials, in which through-bond interactions mediate triplet pair formation, is the ability to control the triplet formation dynamics through molecular engineering. One common design strategy is the use of molecular bridges to mediate interchromophore interactions, decreasing electronic coupling by increasing chromophore-chromophore separation. Here, we report how the judicious choice of aromatic bridges can enhance chromophore-chromophore electronic coupling. This molecular engineering strategy takes advantage of "bridge resonance", in which the frontier orbital energies are nearly degenerate with those of the covalently linked singlet fission chromophores, resulting in fast iSF even at large interchromophore separations. Using transient absorption spectroscopy, we investigate this bridge resonance effect in a series of pentacene and tetracene-bridged dimers, and we find that the rate of triplet formation is enhanced as the bridge orbitals approach resonance. This work highlights the important role of molecular connectivity in controlling the rate of iSF through chemical bonds and establishes critical design principles for future use of iSF materials in optoelectronic devices.

Tunable Emission from Triplet Fusion Upconversion in Diketopyrrolopyrroles.

Optical upconversion based on triplet fusion (TF), also known as triplet-triplet annihilation, is a process by which two or more low-energy photons are converted to one higher energy photon. This process requires two components, a sensitizer which absorbs the incident low-energy photons and an annihilator which emits the higher energy photons. While much attention has been given to the investigation of new types of sensitizers, very little work has been done on the exploration of new annihilators. In this work, we show that the singlet energy of diketopyrrolopyrroles (DPPs) can be altered by modifying the pendant aryl substituents to the core. This allows us to meet the energetic requirements necessary for TF upconversion and demonstrates DPPs as a new class of annihilator molecules. Using this new DPP platform, the output wavelength from upconversion can easily be tuned, which will greatly diversify the number of applications of DPPs in upconversion technologies.

Tuning Singlet Fission in π-Bridge-π Chromophores.

We have designed a series of pentacene dimers separated by homoconjugated or nonconjugated bridges that exhibit fast and efficient intramolecular singlet exciton fission (iSF). These materials are distinctive among reported iSF compounds because they exist in the unexplored regime of close spatial proximity but weak electronic coupling between the singlet exciton and triplet pair states. Using transient absorption spectroscopy to investigate photophysics in these molecules, we find that homoconjugated dimers display desirable excited-state dynamics, with significantly reduced recombination rates as compared to conjugated dimers with similar singlet fission rates. In addition, unlike conjugated dimers, the time constants for singlet fission are relatively insensitive to the interplanar angle between chromophores, since rotation about σ bonds negligibly affects the orbital overlap within the π-bonding network. In the nonconjugated dimer, where the iSF occurs with a time constant >10 ns, comparable to the fluorescence lifetime, we used electron spin resonance spectroscopy to unequivocally establish the formation of triplet-triplet multiexcitons and uncoupled triplet excitons through singlet fission. Together, these studies enable us to articulate the role of the conjugation motif in iSF.

Exciton Correlations in Intramolecular Singlet Fission.

We have synthesized a series of asymmetric pentacene-tetracene heterodimers with a variable-length conjugated bridge that undergo fast and efficient intramolecular singlet fission (iSF). These compounds have distinct singlet and triplet energies, which allow us to study the spatial dynamics of excitons during the iSF process, including the significant role of exciton correlations in promoting triplet pair generation and recombination. We demonstrate that the primary photoexcitations in conjugated dimers are delocalized singlets that enable fast and efficient iSF. However, in these asymmetric dimers, the singlet becomes more localized on the lower energy unit as the length of the bridge is increased, slowing down iSF relative to analogous symmetric dimers. We resolve the recombination kinetics of the inequivalent triplets produced via iSF, and find that they primarily decay via concerted processes. By identifying different decay channels, including delayed fluorescence via triplet-triplet annihilation, we can separate transient species corresponding to both correlated triplet pairs and uncorrelated triplets. Recombination of the triplet pair proceeds rapidly despite our experimental and theoretical demonstration that individual triplets are highly localized and unable to be transported across the conjugated linker. In this class of compounds, the rate of formation and yield of uncorrelated triplets increases with bridge length. Overall, these constrained, asymmetric systems provide a unique platform to isolate and study transient species essential for singlet fission, which are otherwise difficult to observe in symmetric dimers or condensed phases.

Intramolecular Singlet Fission in Oligoacene Heterodimers.

We investigate singlet fission (SF) in heterodimers comprising a pentacene unit covalently bonded to another acene as we systematically vary the singlet and triplet pair energies. We find that these energies control the SF process, where dimers undergo SF provided that the resulting triplet pair energy is similar or lower in energy than the singlet state. In these systems the singlet energy is determined by the lower-energy chromophore, and the rate of SF is found to be relatively independent of the driving force. However, triplet pair recombination in these heterodimers follows the energy gap law. The ability to tune the energies of these materials provides a key strategy to study and design new SF materials-an important process for third-generation photovoltaics.

Quantitative Intramolecular Singlet Fission in Bipentacenes.

Singlet fission (SF) has the potential to significantly enhance the photocurrent in single-junction solar cells and thus raise the power conversion efficiency from the Shockley-Queisser limit of 33% to 44%. Until now, quantitative SF yield at room temperature has been observed only in crystalline solids or aggregates of oligoacenes. Here, we employ transient absorption spectroscopy, ultrafast photoluminescence spectroscopy, and triplet photosensitization to demonstrate intramolecular singlet fission (iSF) with triplet yields approaching 200% per absorbed photon in a series of bipentacenes. Crucially, in dilute solution of these systems, SF does not depend on intermolecular interactions. Instead, SF is an intrinsic property of the molecules, with both the fission rate and resulting triplet lifetime determined by the degree of electronic coupling between covalently linked pentacene molecules. We found that the triplet pair lifetime can be as short as 0.5 ns but can be extended up to 270 ns.

New form of an old natural dye: bay-annulated indigo (BAI) as an excellent electron accepting unit for high performance organic semiconductors.

A novel electron acceptor was synthesized from one-step functionalization of the readily available indigo dye. The resulting bay-annulated indigo (BAI) was utilized for the preparation of a series of novel donor-acceptor small molecules and polymers. As revealed experimentally and by theoretical calculations, substituted BAIs have stronger electron accepting characteristics when compared to several premier electron deficient building blocks. As a result, the donor-acceptor materials incorporating BAI acceptor possess low-lying LUMO energy levels and small HOMO-LUMO gaps. In situ grazing incidence wide-angle X-ray scattering studies of the thin films of BAI donor-acceptor polymers indicated improved crystallinity upon thermal treatment. Field effect transistors based on these polymers show excellent ambipolar transporting behavior, with the hole and electron mobilities reaching 1.5 and 0.41 cm(2) V(-1) s(-1), respectively, affirming BAI as a potent electron accepting unit for high performance organic electronic materials.

Growth Synchronization and Size Control in Magic-Sized Semiconductor Nanocrystals.

"Magic-sized" nanocrystals (MSNCs) grow in discrete jumps between a series of specific sizes. Consequently, MSNCs have been explored as an alternative route to uniform semiconductor particles, potentially with atomic precision. However, because the growth mechanism has been poorly understood, the best strategies to control MSNC syntheses and obtain desired sizes are unknown. Experiments have found that common parameters, such as growth time and temperature, have limited utility. Here, we theoretically and experimentally investigate reactant supersaturation as a tool to control MSNC growth. We compare direct synthesis of CdSe MSNCs with ripening of isolated MSNCs or their mixtures. Surprisingly, we find that MSNCs readily synchronize to the same growth trajectory, even starting from distinct initial conditions, explaining the robustness of MSNC growth. Further, by understanding the synchronization mechanism, we demonstrate methods to control the final MSNC size. These results deepen our knowledge of MSNCs and indicate strategies to tailor their growth.

In silico prediction of annihilators for triplet-triplet annihilation upconversion via auxiliary-field quantum Monte Carlo.

The energy of the lowest-lying triplet state (T1) relative to the ground and first-excited singlet states (S0, S1) plays a critical role in optical multiexcitonic processes of organic chromophores. Focusing on triplet-triplet annihilation (TTA) upconversion, the S0 to T1 energy gap, known as the triplet energy, is difficult to measure experimentally for most molecules of interest. Ab initio predictions can provide a useful alternative, however low-scaling electronic structure methods such as the Kohn-Sham and time-dependent variants of Density Functional Theory (DFT) rely heavily on the fraction of exact exchange chosen for a given functional, and tend to be unreliable when strong electronic correlation is present. Here, we use auxiliary-field quantum Monte Carlo (AFQMC), a scalable electronic structure method capable of accurately describing even strongly correlated molecules, to predict the triplet energies for a series of candidate annihilators for TTA upconversion, including 9,10 substituted anthracenes and substituted benzothiadiazole (BTD) and benzoselenodiazole (BSeD) compounds. We compare our results to predictions from a number of commonly used DFT functionals, as well as DLPNO-CCSD(T0), a localized approximation to coupled cluster with singles, doubles, and perturbative triples. Together with S1 estimates from absorption/emission spectra, which are well-reproduced by TD-DFT calculations employing the range-corrected hybrid functional CAM-B3LYP, we provide predictions regarding the thermodynamic feasibility of upconversion by requiring (a) the measured T1 of the sensitizer exceeds that of the calculated T1 of the candidate annihilator, and (b) twice the T1 of the annihilator exceeds its S1 energetic value. We demonstrate a successful example of in silico discovery of a novel annihilator, phenyl-substituted BTD, and present experimental validation via low temperature phosphorescence and the presence of upconverted blue light emission when coupled to a platinum octaethylporphyrin (PtOEP) sensitizer. The BTD framework thus represents a new class of annihilators for TTA upconversion. Its chemical functionalization, guided by the computational tools utilized herein, provides a promising route towards high energy (violet to near-UV) emission.

Annihilator dimers enhance triplet fusion upconversion.

Optical upconversion is a net process by which two low energy photons are converted into one higher energy photon. There is vast potential to exploit upconversion in applications ranging from solar energy and biological imaging to data storage and photocatalysis. Here, we link two upconverting chromophores together to synthesize a series of novel tetracene dimers for use as annihilators. When compared with the monomer annihilator, TIPS-tetracene, the dimers yield a strong enhancement in the triplet fusion process, also known as triplet-triplet annihilation, as demonstrated via a large increase in upconversion efficiency and an order of magnitude reduction of the threshold power for maximum yield. Along with the ongoing rapid improvements to sensitizer materials, the dimerization improvements demonstrated here open the way to a wide variety of emerging upconversion applications.

Ultra-fast intramolecular singlet fission to persistent multiexcitons by molecular design.

Singlet fission-that is, the generation of two triplets from a lone singlet state-has recently resurfaced as a promising process for the generation of multiexcitons in organic systems. Although advances in this area have led to the discovery of modular classes of chromophores, controlling the fate of the multiexciton states has been a major challenge; for example, promoting fast multiexciton generation while maintaining long triplet lifetimes. Unravelling the dynamical evolution of the spin- and energy conversion processes from the transition of singlet excitons to correlated triplet pairs and individual triplet excitons is necessary to design materials that are optimized for translational technologies. Here, we engineer molecules featuring a discrete energy gradient that promotes the migration of strongly coupled triplet pairs to a spatially separated, weakly coupled state that readily dissociates into free triplets. This 'energy cleft' concept allows us to combine the amplification and migration processes within a single molecule, with rapid dissociation of tightly bound triplet pairs into individual triplets that exhibit lifetimes of ~20 µs.

Triplet Harvesting from Intramolecular Singlet Fission in Polytetracene.

Singlet fission (SF), a promising mechanism of multiple exciton generation, has only recently been engineered as a fast, efficient, intramolecular process (iSF). The challenge now lies in designing and optimizing iSF materials that can be practically applied in high-performance optoelectronic devices. However, most of the reported iSF systems, such as those based on donor-acceptor polymers or pentacene, have low triplet energies, which limits their applications. Tetracene-based materials can overcome significant challenges, as the tetracene triplet state is practically useful, ≈1.2 eV. Here, the synthesis and excited state dynamics of a conjugated tetracene homopolymer are studied. This polymer undergoes ultrafast iSF in solution, generating high-energy triplets on a sub-picosecond time scale. Magnetic-field-dependent photocurrent measurements of polytetracene-based devices demonstrate the first example of iSF-generated triplet extraction in devices, exhibiting the potential of iSF materials for use in next-generation devices.

Distinct properties of the triplet pair state from singlet fission.

Singlet fission, the conversion of a singlet exciton (S1) to two triplets (2 × T1), may increase the solar energy conversion efficiency beyond the Shockley-Queisser limit. This process is believed to involve the correlated triplet pair state 1(TT). Despite extensive research, the nature of the 1(TT) state and its spectroscopic signature remain actively debated. We use an end-connected pentacene dimer (BP0) as a model system and show evidence for a tightly bound 1(TT) state. It is characterized in the near-infrared (IR) region (~1.0 eV) by a distinct excited-state absorption (ESA) spectral feature, which closely resembles that of the S1 state; both show vibronic progressions of the aromatic ring breathing mode. We assign these near-IR spectra to 1(TT)→Sn and S1→Sn' transitions; Sn and Sn' likely come from the antisymmetric and symmetric linear combinations, respectively, of the S2 state localized on each pentacene unit in the dimer molecule. The 1(TT)→Sn transition is an indicator of the intertriplet electronic coupling strength, because inserting a phenylene spacer or twisting the dihedral angle between the two pentacene chromophores decreases the intertriplet electronic coupling and diminishes this ESA peak. In addition to spectroscopic signature, the tightly bound 1(TT) state also shows chemical reactivity that is distinctively different from that of an individual T1 state. Using an electron-accepting iron oxide molecular cluster [Fe8O4] linked to the pentacene or pentacene dimer (BP0), we show that electron transfer to the cluster occurs efficiently from an individual T1 in pentacene but not from the tightly bound 1(TT) state. Thus, reducing intertriplet electronic coupling in 1(TT) via molecular design might be necessary for the efficient harvesting of triplets from intramolecular singlet fission.

A Direct Mechanism of Ultrafast Intramolecular Singlet Fission in Pentacene Dimers.

Interest in materials that undergo singlet fission (SF) has been catalyzed by the potential to exceed the Shockley-Queisser limit of solar power conversion efficiency. In conventional materials, the mechanism of SF is an intermolecular process (xSF), which is mediated by charge transfer (CT) states and depends sensitively on crystal packing or molecular collisions. In contrast, recently reported covalently coupled pentacenes yield ∼2 triplets per photon absorbed in individual molecules: the hallmark of intramolecular singlet fission (iSF). However, the mechanism of iSF is unclear. Here, using multireference electronic structure calculations and transient absorption spectroscopy, we establish that iSF can occur via a direct coupling mechanism that is independent of CT states. We show that a near-degeneracy in electronic state energies induced by vibronic coupling to intramolecular modes of the covalent dimer allows for strong mixing between the correlated triplet pair state and the local excitonic state, despite weak direct coupling.