Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Más filtros

Banco de datos
Tipo del documento
Intervalo de año de publicación
1.
Opt Lett ; 44(3): 715-718, 2019 Feb 01.
Artículo en Inglés | MEDLINE | ID: mdl-30702718

RESUMEN

We demonstrate a 102 W middle infrared ZnGeP2 (ZGP) optical parametric amplifier (OPA) pumped by a 2097-nm Q-switched Ho:YAG laser at a pulse repetition frequency of 10 kHz. The seed middle infrared laser was produced by a ZGP optical parametric oscillator. Its average power was 28.4 W pumped by a 50 W 2097-nm laser. By thermal lens compensation, the beam factor M2 reduced from 3.1 to 2.1. When the incident Ho pump power was 120 W, the middle infrared ZGP OPA yielded the maximum average output power of 102 W and slope efficiency of 61.7%. The overall optical conversion efficiency of 60% from Ho to middle infrared was obtained for the whole middle infrared laser system. In addition, at the maximum average output power, the beam quality factors of the middle infrared ZGP OPA were measured to be about 2.7 and 2.8 for horizontal and vertical directions, respectively.

2.
Opt Lett ; 43(24): 5989-5992, 2018 Dec 15.
Artículo en Inglés | MEDLINE | ID: mdl-30547987

RESUMEN

A high-efficiency and high-brightness Ho:YAG master-oscillator power-amplifier (MOPA) system dual-end pumped by Tm:YLF lasers was demonstrated. The maximum output power of 231 W at a wavelength of 2090.7 nm was achieved with pulse repetition frequency of 10 kHz and pulse width of 22.9 ns, corresponding to pulse energy of 23.1 mJ and peak power of ∼1 MW. The extraction efficiency of the amplifier system was more than 60%. The beam quality factor M2 was measured to be ∼1.05. Using the Ho:YAG MOPA system as the pump source, the ZnGeP2 optical parametric oscillator delivered an output power of 110 W, corresponding to slope efficiency of 62%.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA