RESUMEN
Confined fluids and electrolyte solutions in nanopores exhibit rich and surprising physics and chemistry that impact the mass transport and energy efficiency in many important natural systems and industrial applications. Existing theories often fail to predict the exotic effects observed in the narrowest of such pores, called single-digit nanopores (SDNs), which have diameters or conduit widths of less than 10 nm, and have only recently become accessible for experimental measurements. What SDNs reveal has been surprising, including a rapidly increasing number of examples such as extraordinarily fast water transport, distorted fluid-phase boundaries, strong ion-correlation and quantum effects, and dielectric anomalies that are not observed in larger pores. Exploiting these effects presents myriad opportunities in both basic and applied research that stand to impact a host of new technologies at the water-energy nexus, from new membranes for precise separations and water purification to new gas permeable materials for water electrolyzers and energy-storage devices. SDNs also present unique opportunities to achieve ultrasensitive and selective chemical sensing at the single-ion and single-molecule limit. In this review article, we summarize the progress on nanofluidics of SDNs, with a focus on the confinement effects that arise in these extremely narrow nanopores. The recent development of precision model systems, transformative experimental tools, and multiscale theories that have played enabling roles in advancing this frontier are reviewed. We also identify new knowledge gaps in our understanding of nanofluidic transport and provide an outlook for the future challenges and opportunities at this rapidly advancing frontier.
RESUMEN
Escalating global water scarcity necessitates high-performance desalination membranes, for which fundamental understanding of structure-property-performance relationships is required. In this study, we comprehensively assess the ionization behavior of nanoporous polyamide selective layers in state-of-the-art nanofiltration (NF) membranes. In these films, residual carboxylic acids and amines influence permeability and selectivity by imparting hydrophilicity and ionizable moieties that can exclude coions. We utilize layered interfacial polymerization to prepare physically and chemically similar selective layers of controlled thickness. We then demonstrate location-dependent ionization of carboxyl groups in NF polyamide films. Specifically, only surface carboxyl groups ionize under neutral pH, whereas interior carboxyl ionization requires pH >9. Conversely, amine ionization behaves invariably across the film. First-principles simulations reveal that the low permittivity of nanoconfined water drives the anomalous carboxyl ionization behavior. Furthermore, we report that interior carboxyl ionization could improve the water-salt permselectivity of NF membranes over fourfold, suggesting that interior charge density could be an important tool to enhance the selectivity of polyamide membranes. Our findings highlight the influence of nanoconfinement on membrane transport properties and provide enhanced fundamental understanding of ionization that could enable novel membrane design.
RESUMEN
Despite decades of dominance in separation technology, progress in the design and development of high-performance polymer-based membranes has been incremental. Recent advances in materials science and chemical synthesis provide opportunities for molecular-level design of next-generation membrane materials. Such designs necessitate a fundamental understanding of transport and separation mechanisms at the molecular scale. Molecular simulations are important tools that could lead to the development of fundamental structure-property-performance relationships for advancing membrane design. In this Perspective, we assess the application and capability of molecular simulations to understand the mechanisms of ion and water transport across polymeric membranes. Additionally, we discuss the reliability of molecular models in mimicking the structure and chemistry of nanochannels and transport pathways in polymeric membranes. We conclude by providing research directions for resolving key knowledge gaps related to transport phenomena in polymeric membranes and for the construction of structure-property-performance relationships for the design of next-generation membranes.
Asunto(s)
Membranas Artificiales , Polímeros , Ósmosis , Reproducibilidad de los ResultadosRESUMEN
The transport of hydrated ions across nanochannels is central to biological systems and membrane-based applications, yet little is known about their hydrated structure during transport due to the absence of in situ characterization techniques. Herein, we report experimentally resolved ion dehydration during transmembrane transport using modified in situ liquid ToF-SIMS in combination with MD simulations for a mechanistic reasoning. Notably, complete dehydration was not necessary for transport to occur across membranes with sub-nanometer pores. Partial shedding of water molecules from ion solvation shells, observed as a decrease in the average hydration number, allowed the alkali-metal ions studied here (lithium, sodium, and potassium) to permeate membranes with pores smaller than their solvated size. We find that ions generally cannot hold more than two water molecules during this sterically limited transport. In nanopores larger than the size of the solvation shell, we show that ionic mobility governs the ion hydration number distribution. Viscous effects, such as interactions with carboxyl groups inside the membrane, preferentially hinder the transport of the mono- and dihydrates. Our novel technique for studying ion solvation in situ represents a significant technological leap for the nanofluidics field and may enable important advances in ion separation, biosensing, and battery applications.
Asunto(s)
Transporte Iónico , Litio/química , Potasio/química , Sodio/química , Agua/química , Dispositivos Laboratorio en un Chip , Membranas Artificiales , Microfluídica/instrumentación , Nylons/química , ViscosidadRESUMEN
Increased demand for highly selective and energy-efficient separations processes has stimulated substantial interest in emerging two-dimensional (2D) nanomaterials as a potential platform for next-generation membranes. However, persistently poor separation performance continues to hinder the viability of many novel 2D-nanosheet membranes in desalination applications. In this study, we examine the role of the lamellar structure of 2D membranes on their performance. Using self-fabricated molybdenum disulfide (MoS2) membranes as a platform, we show that the separation layer of 2D nanosheet frameworks not only fails to demonstrate water-salt selectivity but also exhibits low rejection toward dye molecules. Moreover, the MoS2 membranes possess a molecular weight cutoff comparable to its underlying porous support, implying negligible selectivity of the MoS2 layer. By tuning the nanochannel size through intercalation with amphiphilic molecules and analyzing mass transport in the lamellar structure using Monte Carlo simulations, we reveal that small imperfections in the stacking of MoS2 nanosheets result in the formation of catastrophic microporous defects. These defects lead to a precipitous reduction in the selectivity of the lamellar structure by negating the interlayer sieving mechanism that prevents the passage of large penetrants. Notably, the imperfect stacking of nanosheets in the MoS2 membrane was further verified using 2D X-ray diffraction measurements. We conclude that developing a well-controlled fabrication process, in which the lamellar structure can be carefully tuned, is critical to achieving defect-free and highly selective 2D desalination membranes.
Asunto(s)
Molibdeno , Nanoestructuras , Disulfuros , Membranas ArtificialesRESUMEN
Two-dimensional nanomaterial (2-D NM) frameworks, especially those comprising graphene oxide, have received extensive research interest for membrane-based separation processes and desalination. However, the impact of horizontal defects in 2-D NM frameworks, which stem from nonuniform deposition of 2-D NM flakes during layer build-up, has been almost entirely overlooked. In this work, we apply Monte Carlo simulations, under idealized conditions wherein the vertical interlayer spacing allows for water permeation while perfectly excluding salt, on both the formation of the laminate structure and molecular transport through the laminate. Our simulations show that 2-D NM frameworks are extremely tortuous (tortuosity ≈103), with water permeability decreasing from 20 to <1 L m-2 h-1 bar-1 as thickness increased from 8 to 167 nm. Additionally, we find that framework defects allow salt to percolate through the framework, hindering water-salt selectivity. 2-D NM frameworks with a packing density of 75%, representative of most 2-D NM membranes, are projected to achieve <92% NaCl rejection at a water permeability of <1 L m-2 h-1 bar-1, even with ideal interlayer spacing. A high packing density of 90%, which to our knowledge has yet to be achieved, could yield comparable performance to current desalination membranes. Maximizing packing density is therefore a critical technical challenge, in addition to the already daunting challenge of optimizing interlayer spacing, for the development of 2-D NM membranes.
Asunto(s)
Grafito , Nanoestructuras , Membranas Artificiales , Método de Montecarlo , PermeabilidadRESUMEN
Structural tunability and surface functionality of layered two-dimensional (2-D) iron oxychloride (FeOCl) nanosheets are critical for attaining exceptional adsorption properties. In this study, we combine computational and experimental tools to elucidate the distinct adsorption nature of Pb(II) on 2-D FeOCl nanosheets. After finding promising Pb(II) adsorption characteristics by bulk FeOCl sheets (B-FeOCl), we applied computational quantum mechanical modeling to mechanistically explore Pb(II) adsorption on representative FeOCl facets. Results indicate that increasing the exposure of FeOCl oxygen and chlorine sites significantly enhances Pb(II) adsorption. The (110) and (010) facets of FeOCl possess distinct orientations of oxygen and chlorine, resulting in different Pb(II) adsorption energies. Consequently, the (110) facet was found to be more selective toward Pb(II) adsorption than the (010) facet. To exploit this insight, we exfoliated B-FeOCl to obtain ultrathin FeOCl nanosheets (U-FeOCl) possessing unique chlorine- and oxygen-enriched surfaces. As we surmised, U-FeOCl nanosheets achieved excellent Pb(II) adsorption capacity (709 mg g-1 or 3.24 mmol g-1). Moreover, U-FeOCl demonstrated rapid adsorption kinetics, shortening adsorption equilibration time to one-third of the time for B-FeOCl. Extensive characterization of FeOCl-Pb adsorption complexes corroborated the simulation results, illustrating that increasing the number of Pb-O and Pb-Cl interaction sites led to the improved Pb(II) adsorption capacity of U-FeOCl.
Asunto(s)
Compuestos de Hierro , Purificación del Agua , Adsorción , PlomoRESUMEN
Because of their large surface areas, nanotubes and nanowires demonstrate exquisite mechanical coupling to their surroundings, promising advanced sensors and nanomechanical devices. However, this environmental sensitivity has resulted in several ambiguous observations of vibrational coupling across various experiments. Herein, we demonstrate a temperature-dependent Radial Breathing Mode (RBM) frequency in free-standing, electron-diffraction-assigned Double-Walled Carbon Nanotubes (DWNTs) that shows an unexpected and thermally reversible frequency downshift of 10 to 15%, for systems isolated in vacuum. An analysis based on a harmonic oscillator model assigns the distinctive frequency cusp, produced over 93 scans of 3 distinct DWNTs, along with the hyperbolic trajectory, to a reversible increase in damping from graphitic ribbons on the exterior surface. Strain-dependent coupling from self-tensioned, suspended DWNTs maintains the ratio of spring-to-damping frequencies, producing a stable saturation of RBM in the low-tension limit. In contrast, when the interior of DWNTs is subjected to a water-filling process, the RBM thermal trajectory is altered to that of a Langmuir isobar and elliptical trajectories, allowing measurement of the enthalpy of confined fluid phase change. These mechanisms and quantitative theory provide new insights into the environmental coupling of nanomechanical systems and the implications for devices and nanofluidic conduits.
RESUMEN
Designing single-species selective membranes for high-precision separations requires a fundamental understanding of the molecular interactions governing solute transport. Here, we comprehensively assess molecular-level features that influence the separation of 18 different anions by nanoporous cellulose acetate membranes. Our analysis identifies the limitations of bulk solvation characteristics to explain ion transport, highlighted by the poor correlation between hydration energy and the measured permselectivity (R2 = 0.37). Entropy-enthalpy compensation, spanning 40 kilojoules per mole, leads to a free-energy barrier (∆G) variation of only ~8 kilojoules per mole across all anions. We apply machine learning to elucidate descriptors for energetic barriers from a set of 126 collected features. Notably, electrostatic features account for 75% of the overall features used to describe ∆G, despite the relatively uncharged state of cellulose acetate. Our work presents an approach for studying ion transport across nanoporous membranes that could enable the design of ion-selective membranes.
RESUMEN
Ion-surface interactions can alter the properties of nanopores and dictate nanofluidic transport in engineered and biological systems central to the water-energy nexus. The ion adsorption process, known as "charge regulation", is ion-specific and is dependent on the extent of confinement when the electric double layers (EDLs) between two charged surfaces overlap. A fundamental understanding of the mechanisms behind charge regulation remains lacking. Herein, we study the thermodynamics of charge regulation reactions in 20 nm SiO2 channels via conductance measurements at various concentrations and temperatures. The effective activation energies (Ea) for ion conductance at low concentrations (strong EDL overlap) are â¼2-fold higher than at high concentrations (no EDL overlap) for the electrolytes studied here: LiCl, NaCl, KCl, and CsCl. We find that Ea values measured at high concentrations result from the temperature dependence of viscosity and its influence on ion mobility, whereas Ea values measured at low concentrations result from the combined effects of ion mobility and the enthalpy of cation adsorption to the charged surface. Notably, the Ea for surface reactions increases from 7.03 kJ mol-1 for NaCl to 16.72 ± 0.48 kJ mol-1 for KCl, corresponding to a difference in surface charge of -8.2 to -0.8 mC m-2, respectively. We construct a charge regulation model to rationalize the cation-specific charge regulation behavior based on an adsorption equilibrium. Our findings show that temperature- and concentration-dependent conductance measurements can help indirectly probe the ion-surface interactions that govern transport and colloidal interactions at the nanoscaleârepresenting a critical step forward in our understanding of charge regulation and adsorption phenomena under nanoconfinement.
Asunto(s)
Dióxido de Silicio , Cloruro de Sodio , Cationes , Electrólitos , Transporte Iónico , Termodinámica , AguaRESUMEN
The robustness of carbon nanomaterials and their potential for ultrahigh permeability has drawn substantial interest for separation processes. However, graphene oxide membranes (GOms) have demonstrated limited viability due to instabilities in their microstructure that lead to failure under cross-flow conditions and applied hydraulic pressure. Here we present a highly stable and ultrapermeable zeolitic imidazolate framework-8 (ZIF-8)-nanocrystal-hybridized GOm that is prepared by ice templating and subsequent in situ crystallization of ZIF-8 at the nanosheet edges. The selective growth of ZIF-8 in the microporous defects enlarges the interlayer spacings while also imparting mechanical integrity to the laminate framework, thus producing a stable microstructure capable of maintaining a water permeability of 60 l m-2 h-1 bar-1 (30-fold higher than GOm) for 180 h. Furthermore, the mitigation of microporous defects via ZIF-8 growth increased the permselectivity of methyl blue molecules sixfold. Low-field nuclear magnetic resonance was employed to characterize the porous structure of our membranes and confirm the tailored growth of ZIF-8. Our technique for tuning the membrane microstructure opens opportunities for developing next-generation nanofiltration membranes.
RESUMEN
Synthetic membranes with pores at the subnanometre scale are at the core of processes for separating solutes from water, such as water purification and desalination. While these membrane processes have achieved substantial industrial success, the capability of state-of-the-art membranes to selectively separate a single solute from a mixture of solutes is limited. Such high-precision separation would enable fit-for-purpose treatment, improving the sustainability of current water-treatment processes and opening doors for new applications of membrane technologies. Herein, we introduce the challenges of state-of-the-art membranes with subnanometre pores to achieve high selectivity between solutes. We then analyse experimental and theoretical literature to discuss the molecular-level mechanisms that contribute to energy barriers for solute transport through subnanometre pores. We conclude by providing principles and guidelines for designing next-generation single-species selective membranes that are inspired by ion-selective biological channels.
RESUMEN
Phosphorus (P) is a non-renewable natural resource which is used extensively in agriculture as a fertilizer. Phosphate (PO43-) rocks are mined to meet growing agricultural demands induced by rising global populations. Much of the P used in agricultural fields finds its way into surface waters where it permanently resides, leading to devastating effects on the aquatic ecosystem through eutrophication of the waterbodies. This research was aimed at developing a sorbent that can engender a P reuse cycle by utilizing eutrophic surface waters as viable P sources (mines). The goal was to develop a sorbent which can selectively recover low concentration (≤100â¯P⯵g L-1) typical of eutrophic waters. Molecularly imprinted polymers (MIPs) were identified as a potential technology for accomplishing this goal. Three MIPs were screened for viability by assessing their sorption capacities. After the initial screening, one MIP was selected for further studies. The selected MIP was found to have partial PO43- selectivity and tunable P sorption capacity. Adjusting the template:monomer ratio resulted in an increase in P sorption capacity from â¼11 to â¼28â¯mg PO43--P g-1, making this MIP competitive with existing technologies. The MIP was characterized to understand the polymer chemistry and mechanisms of P-removal. The possible mechanisms of aqueous P removal by the MIP were identified as selective chemical binding to the imprinted recognition sites and electrostatic attraction.