RESUMEN
The adsorption of the alkane tetratetracontane (TTC, C44H90) on graphene induces the formation of a curved surface stabilized by a gain in adsorption energy. This effect arises from a curvature-dependent variation of a moiré pattern due to the mismatch of the carbon-carbon separation in the adsorbed molecule and the period of graphene. The effect is observed when graphene is transferred onto a deformable substrate, which in our case is the interface between water layers adsorbed on mica and an organic solvent, but is not observed on more rigid substrates such as boron nitride. Our results show that molecular adsorption can be influenced by substrate curvature, provide an example of two-dimensional molecular self-assembly on a soft, responsive interface, and demonstrate that the mechanical properties of graphene may be modified by molecular adsorption, which is of relevance to nanomechanical systems, electronics, and membrane technology.
RESUMEN
The excited-state dynamics of a reactive dye molecule, auramine O, have been studied in nanoscale water droplets stabilized by a nonionic surfactant. Spectral dynamics were measured as a function of the radius of the water nanodroplet with 50 fs time resolution using time-resolved fluorescence up-conversion method. Qualitatively, the effect of confinement is to dramatically slow the rate of the reaction compared to that of bulk water. Data were quantitatively analyzed using the one-dimensional generalized Smoluchowski equation assuming a time-dependent diffusion coefficient. The results were contrasted with our earlier analysis of auramine O in aqueous nanodroplets stabilized by the ionic surfactant AOT. The excited-state reaction is slower in the nonionic surfactant, showing that interfacial charge is not required to suppress reactions in nanoscale water droplets. The location of the dye in the heterogeneous micelle is investigated by comparing the absorption spectra of AO in the micelle with those of a water- polyethyleneglycol mixture (to mimic the surfactant head group). The results suggest that the charged dye is located in the water phase.
Asunto(s)
Benzofenoneido/química , Ácido Dioctil Sulfosuccínico/química , Nanoestructuras/química , Tensoactivos/química , Agua/química , Fricción , Micelas , Estructura Molecular , Polietilenglicoles/química , Espectrometría de Fluorescencia , Electricidad Estática , Factores de TiempoRESUMEN
The original version of this Article contained an error in the spelling of the author Dan Credgington, which was incorrectly given as Dan Credington. This has now been corrected in both the PDF and HTML versions of the Article.
RESUMEN
Optoelectronic devices based on conjugated polymers often rely on multilayer device architectures, as it is difficult to design all the different functional requirements, in particular the need for efficient luminescence and fast carrier transport, into a single polymer. Here we study the photophysics of a recently discovered class of conjugated polymers with high charge carrier mobility and low degree of energetic disorder and investigate whether it is possible in this system to achieve by molecular design a high photoluminescence quantum yield without sacrificing carrier mobility. Tracing exciton dynamics over femtosecond to microsecond time scales, we show that nearly all nonradiative exciton recombination arises from interactions between chromophores on different chains. We evaluate the temperature dependence and role of electron-phonon coupling leading to fast internal conversion in systems with strong interchain coupling and the extent to which this can be turned off by varying side chain substitution. By sterically decreasing interchain interaction, we present an effective approach to increase the fluorescence quantum yield of low-energy gap polymers. We present a red-NIR-emitting amorphous polymer with the highest reported film luminescence quantum efficiency of 18% whose mobility concurrently exceeds that of amorphous-Si. This is a key result toward the development of single-layer optoelectronic devices that require both properties.
RESUMEN
The generation and recombination of charge carriers in semiconductors through photons controls photovoltaic and light-emitting diode operation. Understanding of these processes in hybrid perovskites has advanced, but remains incomplete. Using femtosecond transient absorption and photoluminescence, it is observed that the luminescence signal shows a rise over 2 ps, while initially hot photogenerated carriers cool to the band edge. This indicates that the luminescence from hot carriers is weaker than that of cold carriers, as expected from strongly radiative transitions in direct gap semiconductors. It is concluded that the electrons and holes show a strong overlap in momentum space, despite recent proposals that Rashba splitting leads to a band offset suppressing such an overlap. A number of possible resolutions to this, including lattice dynamics that remove the Rashba splitting at room temperature, and localization of luminescence events to length scales below 10 nm are considered.
RESUMEN
Organometal halide perovskites (OHP) are promising materials for low-cost, high-efficiency light-emitting diodes. In films with a distribution of two-dimensional OHP nanosheets and small three-dimensional nanocrystals, an energy funnel can be realized that concentrates the excitations in highly efficient radiative recombination centers. However, this energy funnel is likely to contain inefficient pathways as the size distribution of nanocrystals, the phase separation between the OHP and the organic phase. Here, we demonstrate that the OHP crystallite distribution and phase separation can be precisely controlled by adding a molecule that suppresses crystallization of the organic phase. We use these improved material properties to achieve OHP light-emitting diodes with an external quantum efficiency of 15.5%. Our results demonstrate that through the addition of judiciously selected molecular additives, sufficient carrier confinement with first-order recombination characteristics, and efficient suppression of non-radiative recombination can be achieved while retaining efficient charge transport characteristics.
RESUMEN
Anharmonic crystal lattice dynamics have been observed in lead halide perovskites on picosecond timescales. Here, we report that the soft nature of the perovskite crystal lattice gives rise to dynamic fluctuations in the electronic properties of excited states. We use linear polarization selective transient absorption spectroscopy to study the charge carrier relaxation dynamics in lead-halide perovskite films and nanocrystals. We find that photo-excited charge carriers maintain an initial polarization anisotropy for several picoseconds, independent of crystallite size and composition, and well beyond the reported timescales of carrier scattering. First-principles calculations find intrinsic anisotropies in the transition dipole moment, which depend on the orientation of light polarization and the polar distortion of the local crystal lattice. Lattice dynamics are imprinted in the optical transitions and anisotropies arise on the time-scales of structural motion. The strong coupling between electronic states and structural dynamics requires a unique interpretation of recombination and transport mechanisms.
RESUMEN
Organic light-emitting diodes (OLEDs) promise highly efficient lighting and display technologies. We introduce a new class of linear donor-bridge-acceptor light-emitting molecules, which enable solution-processed OLEDs with near-100% internal quantum efficiency at high brightness. Key to this performance is their rapid and efficient utilization of triplet states. Using time-resolved spectroscopy, we establish that luminescence via triplets occurs within 350 nanoseconds at ambient temperature, after reverse intersystem crossing to singlets. We find that molecular geometries exist at which the singlet-triplet energy gap (exchange energy) is close to zero, so that rapid interconversion is possible. Calculations indicate that exchange energy is tuned by relative rotation of the donor and acceptor moieties about the bridge. Unlike other systems with low exchange energy, substantial oscillator strength is sustained at the singlet-triplet degeneracy point.
RESUMEN
In lead halide perovskite solar cells, there is at least one recycling event of electron-hole pair to photon to electron-hole pair at open circuit under solar illumination. This can lead to a significant reduction in the external photoluminescence yield from the internal yield. Here we show that, for an internal yield of 70%, we measure external yields as low as 15% in planar films, where light out-coupling is inefficient, but observe values as high as 57% in films on textured substrates that enhance out-coupling. We analyse in detail how externally measured rate constants and photoluminescence efficiencies relate to internal recombination processes under photon recycling. For this, we study the photo-excited carrier dynamics and use a rate equation to relate radiative and non-radiative recombination events to measured photoluminescence efficiencies. We conclude that the use of textured active layers has the ability to improve power conversion efficiencies for both LEDs and solar cells.
RESUMEN
The performance of quantum dots (QDs) in optoelectronic devices suffers as a result of sub-bandgap states induced by the large fraction of atoms on the surface of QDs. Recent progress in passivating these surface states with thiol ligands and halide ions has led to competitive efficiencies. Here, we apply a hybrid ligand mixture to passivate PbSe QD sub-bandgap tail states via a low-temperature, solid-state ligand exchange. We show that this ligand mixture allows tuning of the energy levels and the physical QD size in the solid state during film formation. We hereby present a novel, postsynthetic path to tune the properties of QD films.