Type of admission and nursing workload of critical patients: a cross-sectional study.

BACKGROUND: According to the perception of nurses in the intensive care unit (ICU), surgical patients need more nursing care, thus requiring higher nursing workloads for these patients than those admitted as clinical patients. However, some study results on the relationship between the type of admission and the nursing workload are considered contradictory. AIMS AND OBJECTIVES: To identify if the type of admission (clinical, emergency surgery or elective surgery) is a predictive factor of the nursing workload required by patients on the first day or throughout their stay in the ICU. DESIGN: This was a quantitative cross-sectional study comprised of a retrospective analysis of clinical records of critical patients. METHODS: Data were collected from 1 May 2015 to 30 September 2015 in a hospital located in São Paulo, Brazil. Nursing workload was measured using the Nursing Activities Score. The type of admission and the demographic and clinical variables of the patients were investigated. Multiple linear regression was used to identify nursing workload predictive factors, with 5% significance level. RESULTS: In the analysed sample (n = 211; mean age of 60·3 ± 18·7 years), there was a prevalence of male gender (56·9%). A statistically significant difference (p = 0·025) was found between the type of admission and the nursing workload required for patients on the first ICU day. The Simplified Acute Physiologic Score (p = 0·009) was a predictor of nursing workload on the first day in the ICU, and the Logistic Organ Dysfunction System (p = 0·026) and mortality (p < 0·001) were predictors throughout the ICU stay. CONCLUSIONS: The type of admission was not a predictive factor of the nursing workload required by critical patients. RELEVANCE TO CLINICAL PRACTICE: Identifying the predictive factors of nursing workload favours the appropriate staffing of the critical unit by nurses. However, nurses should not consider the type of admission in predicting the nursing workload required by patients in the ICU.

Enamel permeability and resistance to acid challenges after systemic use of sodium alendronate: a study in rat teeth.

OBJECTIVES: To evaluate the enamel resistance and permeability of rat teeth to acid challenges after systemic use of sodium alendronate. MATERIALS AND METHODS: Eighteen Wistar rats (36 teeth), aged 36-42 days (200-230 g), were assigned into two groups: alendronate group (n = 20 teeth), which received two weekly doses of 1 mg/kg of alendronate, via gavage; and a non-alendronate group (n = 16 teeth), which received only distilled water. After 60 days, the animals were killed, the maxillary incisors were extracted and used for the artificial induction of the caries lesion (pH cycling regimen) and erosion area (immersion cycles in cola-type soft drink) and for the enamel permeability test (dye penetration). The teeth were divided into alendronate group (n = 10) or non-alendronate group (n = 8) for each test. The quantitative response variables were the percent longitudinal change in Knoop microhardness (%LMC), the enamel carious/erosion lesion area (CELA) and enamel permeability. RESULTS: Groups were not significantly different (p > 0.05) with regard to the %LMC and enamel permeability (25.58 µm ± 12.73 and 25.40 µm ± 4.6 for the experimental and control groups, respectively). For CELA, it was not observed significant difference (p > 0.05) between the non-alendronate group (24.08 ± 1.36 and 25.22 ± 1.60, for caries and erosion, respectively) and the alendronate group (25.46 ± 1.60 and 25.0 ± 1.26) for caries and erosion, respectively). CONCLUSIONS: Based on the methodological conditions and the presented results of this study, sodium alendronate did not affect the longitudinal microhardness, demineralisation lesion area or permeability of the enamel after acid challenge; therefore, alendronate did not become the enamel of rats more resistant. CLINICAL RELEVANCE: The systemic alendronate treatment for 60 days did not change the enamel of rats regarding the susceptibility to acids.

Nd:YAG laser in occlusal caries prevention of primary teeth: a randomized clinical trial.

Dental caries is still the most prevalent chronic disease affecting human populations. Among the preventive treatments performed, it has been reported that laser irradiation combined with topical fluoride can induce an even greater increase in enamel caries resistance. The aim of this study was to evaluate the Nd:YAG laser, with or without fluoride, in occlusal caries prevention of the primary dentition. A double-blind split-mouth study design was used. Fifty-two children with high caries risk (7.6 ± 1.4 years) were selected and received the following: G1--the first molar was a negative control, and the second received a resin sealant; G2--the first molar was a negative control, and the second received laser irradiation (50 mJ, 10 Hz, 0.5 W); G3--the first molar received only acidulate phosphate fluoride (APF), and the second received APF + laser; G4--fisrt molar received only fluoride varnish, and the second received fluoride varnish + laser. Patients were followed up to 12 months to evaluate the presence of white-spot lesions and/or caries cavities by three calibrated observers. Thirty-five patients completed the study. Significant differences were found between the treatment and control groups (p < 0.05). The laser-alone and resin sealant resulted in statistically lower caries formation than the negative control group (p < 0.05). Nd:YAG laser irradiation in primary teeth effectively prevented occlusal caries in pits and fissures when used alone with lower energy over a 1-year period.

Effect of pretreatment with an Er:YAG laser and fluoride on the prevention of dental enamel erosion.

The aim of this study was to evaluate the effect of the Er:YAG laser and its association with fluoride (1.23% acidulate phosphate fluoride gel) on the prevention of enamel erosion. Sixty specimens were obtained from bovine enamel (4 × 4 mm), which were ground flat, polished, and randomly divided into five groups according to the preventive treatments: control-fluoride application; L--Er:YAG laser; L+F--laser + fluoride; F+L--fluoride + laser; L/F--laser/fluoride simultaneously. Half of the enamel surface was covered with nail varnish (control area), and the other half was pretreated with one of the preventive strategies to subsequently be submitted to erosive challenge. When the laser was applied, it was irradiated for 10 s with a focal length of 4 mm and 60 mJ/2 Hz. Fluoride gel was applied for 4 min. Each specimen was individually exposed to regular Coca-Cola® for 1 min, four times/day, for 5 days. Wear analysis was performed with a profilometer, and demineralization was assessed with an optical microscope. Data were analyzed using the Kruskal-Wallis test (wear)/Dunn test and ANOVA/Fisher's exact tests. The group L/F was similar to control group. The other groups showed higher wear, which did not present differences among them. In the demineralization assessment, the groups F+L and L/F showed lower demineralization in relation to the other groups. It can be concluded that none preventive method was able to inhibit dental wear. The treatments L/F and F+L showed lower enamel demineralization.

Cytokine Release Syndrome in the Pediatric Population and Implications for Intensive Care Management.

Cytokine release syndrome represents a spectrum of disease varying from fever alone to multiorgan system failure. Most commonly seen following treatment with chimeric antigen receptor T cell therapy, it is increasingly being described with other immunotherapies as well as following hematopoietic stem cell transplant. As its symptoms are nonspecific, awareness is key to timely diagnosis and initiation of treatment. Given the high risk of cardiopulmonary involvement, critical care providers must be familiar with the cause, symptoms, and therapeutic options. Current treatment modalities focus on immunosuppression and targeted cytokine therapy.

Epidemiology of Bleeding in Critically Ill Children With an Underlying Oncologic Diagnosis.

OBJECTIVES: Critically ill children with malignancy have significant risk of bleeding but the exact epidemiology is unknown. We sought to describe severe bleeding events and associated risk factors in critically ill pediatric patients with an underlying oncologic diagnosis using the newly developed Bleeding Assessment Scale in Critically Ill Children definition. DESIGN: Retrospective cohort study. SETTING: PICU in comprehensive cancer center. PATIENTS: Children ages 28 days to 18 years with an underlying oncologic diagnosis admitted to the PICU during 2018. INTERVENTIONS: None. MEASUREMENTS AND MAIN RESULTS: Two-hundred sixty-seven admissions met inclusion criteria. Sixty-four percent (171/267) were male, with a median (interquartile range) age of 6.3 years (3.1-12.1 yr). Nine percent (23/267) had at least one severe bleeding event during their PICU admission. There were no significant differences between those with severe bleeding and those without, with respect to gender (p = 0.07), age (p = 0.66), weight (p = 0.76), or transplant status (p = 0.18). There was a difference in the frequency of severe bleeding based on underlying oncologic diagnosis (p = 0.009). For patients with severe bleeding, the median (interquartile range) platelet count and international normalized ratio on the day of bleeding were 102 × 109/L (40-181 × 109/L) and 1.36 (1.26-1.51), respectively. Eighty-seven percent patients (20/23) with severe bleeding received at least one blood component in response to bleeding. Two patients received antifibrinolytics. Patients with severe bleeding had significantly fewer PICU-free days (p = 0.001), fewer ventilator-free days (p < 0.001), and higher 28-day mortality (p = 0.003). CONCLUSIONS: Severe bleeding occurred in nearly one-tenth of critically ill children with an underlying oncologic diagnosis without severe thrombocytopenia or coagulopathy. The vast majority received blood component therapy, but few received hemostatic medication. Studies are needed to guide the treatment of severe bleeding in this vulnerable patient population.

Effect of a bleaching agent on abrasion of resin-based restoratives.

PURPOSE: To evaluate the effect of a 10% carbamide peroxide-containing bleaching agent on brushing abrasion of esthetic restorative materials. METHODS: Using a randomized complete block design, 150 specimens (n = 15) measuring 3 x 3 x 2 mm were fabricated into acrylic resin cylinders, using one of the restorative materials: a microfilled resin composite (Al), a hybrid resin composite (Ch), a flowable resin composite (Wa), a resin-modified glass-ionomer cement (Fj) and a polyacid-modified resin composite (Dy). The bleaching agent or artificial saliva (control) was applied for 2 hours/day. After that, 120 brushing strokes were simulated automatically and the samples were kept in artificial saliva. Such bleaching/brushing cycle was performed daily for 21 days. Wear depth was assessed using profilometry. RESULTS: Bleaching did not show significant effect on wear depth. There was a significant difference among the restorative materials. Tukey's test showed that (Al = Ch) < (Wa) < (Fj) and that Dy was only different from Fj.

Concentration-dependent effect of bleaching agents on microhardness and roughness of enamel and dentin.

PURPOSE: To evaluate the microhardness and surface roughness of enamel and root dentin bleached with 10%, 15% and 22% carbamide peroxide agents. METHODS: 52 slabs of enamel and root dentin (6 x 3 x 2 mm) were cut from bovine incisors, ground flat and polished. According to a randomized complete block design, enamel and root dentin slabs (n = 13) were independently allocated to be bleached with one of the following carbamide peroxide-containing agents (CP): 10% (Rembrandt Bleaching Gel Plus), 15% (Rembrandt Xtra Comfort), or 22% (Rembrandt Xtra Comfort Ultra Strength). The control groups were mock-treated with artificial saliva. The bleaching procedures consisted of daily application of the agents on dental substrate surfaces for 2 hours, followed by immersion in artificial saliva for 22 hours over 21 days. Knoop microhardness and surface roughness were measured initially, on sound dental tissues, and at the postbleaching phase. RESULTS: In enamel, microhardness attained after bleaching with 10% CP and 15% CP were similar and significantly lower than that observed for the control group. Specimens bleached with CP 22% did not differ from any of the other groups tested. In root dentin, microhardness changes were indistinguishable. ANOVA showed no significant difference among treatments with respect to surface roughness.

Susceptibility of bleached enamel and root dentin to artificially formed caries-like lesions.

PURPOSE: To evaluate in vitro the susceptibility of caries-like lesion formation on enamel and root dentin that had been bleached with carbamide peroxide agents. METHODS: 150 slabs of bovine enamel and root dentin were ground flat and polished. According to a randomized complete block design, the specimens were then allocated to be bleached with agents (Rembrandt) containing 12% [CP12], 16% [CP16], 22% [CP22] or 30% [CP30] of carbamide peroxide over 21 days. The control group remained unbleached. Afterwards, all specimens were randomly distributed between two subgroups (n= 15): one was subjected to alternating demineralizing and remineralizing solutions to induce caries-like lesions and the other was not. Enamel specimens were cycled four times in demineralizing (pH 5.0) and remineralizing solutions (pH 7.0), while root dentin specimens were cycled twice. Microhardness measurements were carried out at the post-bleaching and at the post-caries lesion formation phases. RESULTS: In the post-bleaching condition, microhardness values for both enamel and root dentin were dependent on the bleaching agent used. At the post-caries formation stage, there was a significant interaction between the bleaching treatment and substrate condition (carious or noncarious) for enamel and root dentin. Regardless of the bleaching agent, carious enamel and root dentin presented significantly lower microhardness values as compared to the noncarious counterparts. For carious enamel, those specimens exposed to CP16 exhibited higher microhardness values than the subset group formed by CP22, CP30 and unbleached samples. Both subsets did not differ from CP12. For carious root dentin, no difference was observed among the microhardness values attained as a result of the different bleaching treatments.

Chemical and Morphological Changes of Primary Teeth Irradiated with Nd:YAG Laser: An Ex Vivo Long-Term Analysis.

OBJECTIVE: The aim of this study was to assess any long-term chemical and morphological Nd:YAG laser modifications on irradiated primary enamel. BACKGROUND DATA: Previous studies on irradiated primary human enamel employed methodologies that evaluated the short-term effects only. METHODS: One hundred and eighty-six irradiated (with and/or without fluoride) primary enamel teeth from high-caries-risk children, which were exfoliated over a 1-year period, were collected, and the sample surface area was submitted for scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray energy-dispersive spectrometry (EDS). The subsurface was analyzed by Knoop microhardness and light microscopy (LM). Data were analyzed by one way ANOVA and Tukey tests (α=0.05) and Kruskall-Wallis and Tukey tests (α=0.05). RESULTS: FTIR analysis revealed a higher concentration of phosphate and carbonate in the irradiated (0.987±0.064) and lower concentration in the control groups (1.477±0.310). SEM analysis showed that the control samples exhibited a slightly smoother surface than the irradiated groups. The EDS analysis did not show any differences in the amount of calcium, phosphorus, or fluoride among the groups. The microhardness analysis revealed that sealant (249.86±7.15) and laser irradiation (262.44±22.69) led to higher hardness values than the negative control group (128.35±25.19). LM indicated significantly reduced caries formation in the laser (5.35±5.38%) and the laser plus acidulated phosphate fluoride (APF) groups (10.35±0.88%) compared with the negative control group (72.56±12.86%). CONCLUSIONS: Even with the limitations of the present study, these results suggest that Nd:YAG irradiation clinically modified the chemical composition of the enamel surface regardless of fluoride concentration, which successfully inhibited demineralization of primary tooth enamel over a 1-year period without significant morphological changes.

The combined use of Er,Cr:YSGG laser and fluoride to prevent root dentin demineralization.

UNLABELLED: The use of erbium lasers to prevent caries in enamel has shown positive results. However, it is not known if Er,Cr:YSGG laser can also be used to increase acid resistance of root dentine, which is another dental tissue susceptible to the action of cariogenic bacteria. OBJECTIVE: To analyze the effects of the Er,Cr:YSGG laser (λ=2.78 µm, 20 Hz) irradiation associated with 2% neutral sodium fluoride (NaF) to prevent root dentin demineralization. MATERIAL AND METHODS: One hundred human root dentin samples were divided into 10 groups (G) and treated as follows: G1: no treatment; G2: NaF; G3: laser (4.64 J/cm2) with water cooling (WC=5.4 mL/min); G4: laser (4.64 J/cm2) without WC; G5: laser (8.92 J/cm2) with WC; G6: laser (8.92 J/cm2) without WC; G7: laser (4.64 J/cm2) with WC and NaF; G8: laser (4.64 J/cm2) without WC and NaF; G9: laser (8.92 J/cm2) with WC and NaF; G10: laser (8.92 J/cm2) without WC and NaF. The NaF gel was applied alone or after 4 min of irradiation. After 14 days of acid challenge, the samples were sectioned and the Knoop microhardness (KHN) test was done at different depths (30, 60, 90 and 120 µm) from the outer dentin surface. Data were analyzed by one-way ANOVA and Fisher's test (α=5%). RESULTS: The results showed that G8 and G10 presented higher KHN than the G1 for the depths of 30 and 60 µm, indicating an increase of the acid resistance of the dentin in up to 35% (p<0.05). CONCLUSIONS: The use of Er,Cr:YSGG laser irradiation at 4.64 J/ cm2 and 8.92 J/cm2 without water cooling and associated with 2% NaF can increase the acid resistance of human root dentin.

The use of an Er:YAG laser to remove demineralized dentin and its influence on dentin permeability.

The purpose of this study was to analyze, correlate, and compare the demineralization and permeability of dentin remaining after caries removal with either an Er:YAG laser, a bur, or a curette. Thirty human dentin fragments were immersed in a demineralizing solution for 20 days and were randomly divided into three groups (n = 10) for the removal of the demineralized lesion. The groups were G1-Er:YAG laser (200 mJ/6 Hz; noncontact at 12 mm; spot: 0.63 mm), G2-Bur, and G3-Curette. The specimens were then immersed in a 10% copper sulfate solution, then in a 1% dithiooxamide alcoholic solution for 30 min and kept in ammonia vapor for 7 days. Next, the specimens were examined with optical microscopy. The amount of demineralized dentin and the level of copper ion infiltration in the dentin were quantified in µm using Axion Vision software. Data were analyzed with the Kruskal-Wallis test (p < 0.05) and Pearson's Correlation test. The analysis revealed no significant differences between the three caries removal methods in terms of their capacity to remove demineralized tissue (G1: 10.6 µm; G2: 8.4 µm; G3: 11 µm), although the laser removal generated more tissue permeability than the others methods (G1: 17.6 µm; G2: 6.6 µm; G3: 5.5 µm). The correlation between the remaining demineralized dentin and the dentin permeability was moderate for the conventional methods and higher for the Er:YAG laser. It can therefore be concluded that the laser produced an increase in permeability that was directly proportional to the amount of demineralized tissue removal.

Effect of Nd:YAG laser combined with fluoride on the prevention of primary tooth enamel demineralization.

Most studies dealing with the caries preventive action of Nd:YAG laser have been done in permanent teeth and studies on primary teeth are still lacking. The aim of this study was to evaluate in vitro the effect of Nd:YAG laser combined or not with fluoride sources on the acid resistance of primary tooth enamel after artificial caries induction by assessing longitudinal microhardness and demineralization depth. Sixty enamel blocks obtained from the buccal/lingual surface of exfoliated human primary molars were coated with nail polish/wax, leaving only a 9 mm² area exposed on the outer enamel surface, and randomly assigned to 6 groups (n=10) according to the type of treatment: C-control (no treatment); APF: 1.23% acidulated phosphate fluoride gel; FV: 5% fluoride varnish; L: Nd:YAG laser 0.5 W/10 Hz in contact mode; APFL: fluoride gel + laser; FVL: fluoride varnish + laser. After treatment, the specimens were subjected to a des-remineralization cycle for induction of artificial caries lesions. Longitudinal microhardness data (%LMC) were analyzed by the Kruskal-Wallis test and demineralization depth data were analyzed by oneway ANOVA and Fisher's LSD test (á=0.05). APFL and APF groups presented the lowest percentage of microhardness change (p<0.05). Demineralization depth was smaller in all treated groups compared with the untreated control. In conclusion, Nd:YAG laser combined or not with fluoride gel/varnish was not more effective than fluoride alone to prevent enamel demineralization within the experimental period.

Effect of a 10% carbamide peroxide on wear resistance of enamel and dentine: in situ study.

OBJECTIVES: This triple-blind, 2x2 crossover in situ study, was undertaken to verify whether the wear resistance of enamel and root dentine would be affected by bleaching with a 10% carbamide peroxide agent and a placebo agent. METHODS: Thirty slabs of each substrate (2mm x 3mm x 2mm) were selected for each phase, after flattening and polishing procedures and microhardness test. After a 7-day lead-in period, one specimen of each substrate was randomly bonded on the facial surface of each one of 30 subject's upper second premolars. The volunteers received instructions on how to perform toothbrushing and application of gel in the tray. Fifteen volunteers bleached their maxillary arch with a 10% carbamide peroxide bleaching agent for a 2-week period, while the remainders used a placebo agent. After a 1-week washout period, a new set of enamel and root dentine slabs were bonded to the premolars and volunteers were crossed over to the alternate agent for 14 days. The resistance of enamel and root dentine to wear following bleaching, toothbrushing and intraoral exposure was measured with a profilometer, using reference areas. RESULTS: For enamel, ANOVA did not demonstrate significant difference between wear provided by placebo and bleaching agent (p=0.3713), but higher wear depth was observed for bleached root dentine (p=0.0346). CONCLUSIONS: While overnight bleaching caused no alteration in wear resistance of enamel, root dentine showed increased tissue loss.

The combined use of Er, Cr: YSGG laser and fluoride to prevent root dentin demineralization

The use of erbium lasers to prevent caries in enamel has shown positive results. However, it is not known if Er,Cr:YSGG laser can also be used to increase acid resistance of root dentine, which is another dental tissue susceptible to the action of cariogenic bacteria. Objective: To analyze the effects of the Er,Cr:YSGG laser (λ=2.78 μm, 20 Hz) irradiation associated with 2% neutral sodium fluoride (NaF) to prevent root dentin demineralization. Material and Methods: One hundred human root dentin samples were divided into 10 groups (G) and treated as follows: G1: no treatment; G2: NaF; G3: laser (4.64 J/cm2) with water cooling (WC=5.4 mL/min); G4: laser (4.64 J/cm2) without WC; G5: laser (8.92 J/cm2) with WC; G6: laser (8.92 J/cm2) without WC; G7: laser (4.64 J/cm2) with WC and NaF; G8: laser (4.64 J/cm2) without WC and NaF; G9: laser (8.92 J/cm2) with WC and NaF; G10: laser (8.92 J/cm2) without WC and NaF. The NaF gel was applied alone or after 4 min of irradiation. After 14 days of acid challenge, the samples were sectioned and the Knoop microhardness (KHN) test was done at different depths (30, 60, 90 and 120 μm) from the outer dentin surface. Data were analyzed by one-way ANOVA and Fisher’s test (α=5%). Results: The results showed that G8 and G10 presented higher KHN than the G1 for the depths of 30 and 60 μm, indicating an increase of the acid resistance of the dentin in up to 35% (p<0.05). Conclusions: The use of Er,Cr:YSGG laser irradiation at 4.64 J/ cm2 and 8.92 J/cm2 without water cooling and associated with 2% NaF can increase the acid resistance of human root dentin. .

Bleaching agents with varying concentrations of carbamide and/or hydrogen peroxides: effect on dental microhardness and roughness.

PURPOSE: To evaluate the effect of low and highly concentrated bleaching agents on microhardness and surface roughness of bovine enamel and root dentin. METHODS: According to a randomized complete block design, 100 specimens of each substrate were assigned into five groups to be treated with bleaching agents containing carbamide peroxide (CP) at 10% (CP10); hydrogen peroxide (HP) at 7.5% (HP7.5) or 38% (HP38), or the combination of 18% of HP and 22% of CP (HP18/CP22), for 3 weeks. The control group was left untreated. Specimens were immersed in artificial saliva between bleaching treatments. Knoop surface microhardness (SMH) and average surface roughness (Ra) were measured at baseline and post-bleaching conditions. RESULTS: For enamel, there were differences between bleaching treatments for both SMH and Ra measurements (p = 0.4009 and p = 0.7650, respectively). SMH significantly increased (p < 0.0001), whereas Ra decreased (p = 0.0207) from baseline to post-bleaching condition. For root dentin, the group treated with CP10 exhibited the significantly highest SMH value differing from those groups bleached with HP18/CP22, HP7.5, which did not differ from each other. Application of HP38 resulted in intermediate SMH values. No significant differences were found for Ra (p = 0.5975). Comparing the baseline and post-bleaching conditions, a decrease was observed in SMH (p < 0.0001) and an increase in Ra (p = 0.0063). CONCLUSION: Bleaching agents with varying concentrations of CP and/or HP are capable of causing mineral loss in root dentin. Enamel does not perform in such bleaching agent-dependent fashion when one considers either hardness or surface roughness evaluations. CLINICAL SIGNIFICANCE Bleaching did not alter the enamel microhardness and surface roughness, but in root dentin, microhardness seems to be dependent on the bleaching agent used.

Comparative study of the wear behavior of composites for posterior restorations.

This investigation sought to compare the abrasive wear rates of resin composites designed for posterior applications. Seventy-five specimens were fabricated with conventional hybrid (Charisma and Filtek Z250) or packable composites (Filtek P60, Solitaire II and Tetric Ceram HB), according to a randomized complete block design (n = 15). Specimens were finished and polished metallographically and subjected to abrasive wear which was performed under a normal load of 13N at a frequency of 2 Hz using a pneumatic device (MSM/Elquip) in the presence of a mucin-containing artificial saliva. Wear was quantified profilometrically in five different locations of each specimen after 1,000, 5,000, 10,000, 50,000 and after every each 50,000 through 250,000 cycles. A split-plot ANOVA showed a significant difference between the wear resistance of composites (alpha = 0.05). Tukey's test ascertained that while the composites Filtek Z250 and Charisma wore significantly less than any other of the materials tested, Tetric Ceram HB experienced the greatest wear rates. Filtek P60 and Solitaire II showed intermediate rates of material removal. The wear pattern of composites proved to be biphasic with the primary phase having the faster wear rate. In conclusion, packable resin composites may not have superior wear compared to conventional hybrid composites.

Effect of Nd:YAG laser combined with fluoride on the prevention of primary tooth enamel demineralization

Most studies dealing with the caries preventive action of Nd:YAG laser have been done in permanent teeth and studies on primary teeth are still lacking. The aim of this study was to evaluate in vitro the effect of Nd:YAG laser combined or not with fluoride sources on the acid resistance of primary tooth enamel after artificial caries induction by assessing longitudinal microhardness and demineralization depth. Sixty enamel blocks obtained from the buccal/lingual surface of exfoliated human primary molars were coated with nail polish/wax, leaving only a 9 mm² area exposed on the outer enamel surface, and randomly assigned to 6 groups (n=10) according to the type of treatment: C-control (no treatment); APF: 1.23% acidulated phosphate fluoride gel; FV: 5% fluoride varnish; L: Nd:YAG laser 0.5 W/10 Hz in contact mode; APFL: fluoride gel + laser; FVL: fluoride varnish + laser. After treatment, the specimens were subjected to a des-remineralization cycle for induction of artificial caries lesions. Longitudinal microhardness data (%LMC) were analyzed by the Kruskal-Wallis test and demineralization depth data were analyzed by oneway ANOVA and Fisher’s LSD test (á=0.05). APFL and APF groups presented the lowest percentage of microhardness change (p<0.05). Demineralization depth was smaller in all treated groups compared with the untreated control. In conclusion, Nd:YAG laser combined or not with fluoride gel/varnish was not more effective than fluoride alone to prevent enamel demineralization within the experimental period.

A maioria dos estudos que utilizam o laser Nd:YAG com ação preventiva são em dentes permanentes, e são escassos os estudos em dentes decíduos. Desta forma, o objetivo do presente estudo foi avaliar in vitro o efeito do laser Nd: YAG combinado ou não com flúor na resistência ácida do esmalte decíduo após a indução de cárie artificial, através da avaliação de microdureza longitudinal e profundidade da desmineralização. Para tanto, foram selecionados 60 fragmentos de esmalte obtidos a partir da superfície bucal / lingual de molares decíduos irrompidos, os quais foram isolados com esmalte de unha e cera, deixando uma área exposta de 9 mm² na superfície do esmalte. Os espécimes foram divididos aleatoriamente em 6 grupos (n = 10) de acordo com o tipo de tratamento: C- Controle: sem tratamento; APF: aplicação de gel flúor fosfato acidulado 1,23%; FV: aplicação de verniz fluoretado 5%; L: aplicação do Laser Nd:YAG 0,5 W/10 Hz no modo contato; APFL: aplicação de gel flúor fosfato acidulado + Laser Nd:YAG; FVL: aplicação de verniz fluoretado 5% + Laser Nd:YAG. Após os tratamentos, os espécimes foram submetidos a um ciclo de desremineralização para a indução de lesão de cárie artificial. Os dados de microdureza longitudinal (%LMC) foram avaliados pelo teste de Kruskal-Wallis e os dados de profundidade da desmineralização foram avaliados pelos testes ANOVA e Fisher’s LSD (α=5%). Observou-se que os grupos APFL e APF apresentaram menor percentual de perda de dureza (p<0,05). A profundidade de desmineralização foi menor em todos os grupos tratados em comparação com o controle. Em conclusão, o laser Nd: YAG associado ou não com flúor/verniz não foi mais efetivo do que o flúor sozinho para prevenir a desmineralização do esmalte durante o período experimental.

Rehardening of caries-like lesions in root surfaces by saliva substitutes.

OBJECTIVE: This study sought to evaluate whether root dentine caries-like lesions could be remineralised by saliva substitutes. METHODS: Root dentine slabs (3 x 3 x 2 mm) were cut from bovine incisors, ground flat, polished and pre-tested for Knoop microhardness (KHN) at five locations spaced 500 microm apart and 500 microm from the left edge of each sectioned piece. After 60 out of the 100 slabs had been selected based upon their KHN values, specimens were coated with wax except for their outer surface. Specimens were then cycled through a highly cariogenic challenge model to induce caries-like lesions, whose formation was confirmed by KHN measurements located 500 microm from the right edge of the specimen. According to a randomised complete block design, the experimental units (n = 15) were exposed to 1.5 ml of saliva substitutes, based on either mucin (MC) or carboxymethylcellulose (CM), to natural human saliva (HS) or to 100% relative humidity (RH) over 20 days. Remineralisation was verified by KHN measurements located 1000 microm apart from the right edge of the specimen. RESULTS: Analysis of variance indicated a significant (p < 0.0001) difference among the KHN values attained by the carious root dentine after exposure to the remineralising agents. Tukey's test ascertained that remineralisation was greatest with MC, intermediate with CM and least with HS, but rehardening did not reach the pre-caries lesion formation values. CONCLUSION: Saliva substitutes may provide partial remineralisation to preformed caries-like lesions in root dentine.

Influência de dentifrícios com diferentes formulações no desgaste do esmalte dental clareado / Influence of dentifrices with different formulations in the wear of bleached enamel

Esse estudo in vitro avaliou o efeito de dentifrícios com diferentes formulações no desgaste do esmalte dental quando submetido ao tratamento clareador caseiro com gel a base de peróxido de carbamida em diferentes concentrações. Foram avaliados os efeitos de nove grupos experimentais, resultantes da combinação de três agentes clareadores - Whiteness Perfect 10% (PC10%), Whiteness Perfect 16% (PC16%) e saliva artificial (SA), como controle - e de três dentifrícios - Enamel Care (EC), Restore (RE) e Colgate Total 12 (CO), como controle. A amostra foi constituída de 99 fragmentos de esmalte bovino (n=11). Os agentes clareadores ou a saliva artificial foram aplicados na superfície de cada fragmento, que foi recoberto por uma moldeira individual e, então, imerso em um recipiente fechado contendo saliva artificial por 4 horas. Após esse período, os espécimes foram submetidos aos ensaios abrasivos, utilizando-se uma suspensão (slurry) obtida pela mistura de um dos dentifrícios com água destilada e deionizada. No restante do período diário, os grupos experimentais e controle foram mantidos em saliva artificial. Este ciclo clareamento/escovação foi realizado por 11 dias. A leitura de desgaste superficial foi realizada por meio de perfilômetro. O teste de Friedman foi significativo (p<0,0001). Os grupos SA/CO e SA/EC apresentaram os menores valores de desgaste, significativamente diferente do PC16%/RE. Os demais grupos apresentam valores intermediários sem diferenças entre os demais. Sugere-se que o gel a base de peróxido de carbamida a 16% utilizado neste estudo, deveria ser utilizado em associação com os dentifrícios que contenham flúor em sua composição.

This in vitro study evaluated the effect of dentifrices with different formulations in the wear of enamel submitted to treatment with carbamide peroxide bleaching agents in different concentrations. Nine experimental groups (n=11) were evaluated, resulting from the combination of three bleaching agents - Whiteness Perfect 10% (PC10%), Whiteness Perfect 16% (PC16%) and artificial saliva (SA), as control - and three dentifrices - Enamel Care (EC), Restore (RE) and Colgate Total 12 (CO), as control. The experimental units consisted of 99 bovine enamel slabs, which were exposed to one of the bleaching agent or artificial saliva. During the bleaching process, the specimens were covered with a tray and individually kept in artificial saliva for 4 hours. Subsequently, the experimental units were subject to brushing abrasion, using slurry obtained by mixing each one of the dentifrices with deionized and distilled water. During the remaining time, the specimens were individually maintained in containers with artificial saliva. These procedures were repeated over 11 consecutive days. The wear depth was measured using a profilometer. Friedman's test was significant (p<0.0001). The groups SA/CO and SA/EC had the lowest wear value differing significantly from group PC16%/RE. The other groups showed intermediate values. The results suggested that treatment with 16% carbamide peroxide bleaching agent used in this study should be used in combination with a fluoride dentifrice.