Modulating charge-dependent and folding-mediated antimicrobial interactions at peptide-lipid interfaces.

Peptide-lipid interactions support a variety of biological functions. Of particular interest are those that underpin fundamental mechanisms of innate immunity that are programmed in host defense or antimicrobial peptide sequences found virtually in all multicellular organisms. Here we synthetically modulate antimicrobial peptide-lipid interactions using an archetypal helical antimicrobial peptide and synthetic membranes mimicking bacterial and mammalian membranes in solution. We probe these interactions as a function of membrane-induced folding, membrane stability and peptide-lipid ratios using a correlative approach encompassing light scattering and spectroscopy measurements such as circular dichroism spectroscopy, fluorescence and nuclear magnetic resonance spectroscopy. The peptide behavior is assessed against that of its anionic counterpart having similar propensities for α-helical folding. The results indicate strong correlations between peptide folding and membrane type, supporting folding-responsive binding of antimicrobial peptides to bacterial membranes. The study provides a straightforward approach for modulating structure-activity relationships in the context of membrane-induced antimicrobial action, thus holding promise for the rational design of potent antimicrobial agents.

pH-sensitive niosomes: Effects on cytotoxicity and on inflammation and pain in murine models.

pH-sensitive nonionic surfactant vesicles (niosomes) by polysorbate-20 (Tween-20) or polysorbate-20 derivatized by glycine (added as pH sensitive agent), were developed to deliver Ibuprofen (IBU) and Lidocaine (LID). For the physical-chemical characterization of vesicles (mean size, size distribution, zeta potential, vesicle morphology, bilayer properties and stability) dynamic light scattering (DLS), small angle X-ray scattering and fluorescence studies were performed. Potential cytotoxicity was evaluated on immortalized human keratinocyte cells (HaCaT) and on immortalized mouse fibroblasts Balb/3T3. In vivo antinociceptive activity (formalin test) and anti-inflammatory activity tests (paw edema induced by zymosan) in murine models were performed on drug-loaded niosomes. pH-sensitive niosomes were stable in the presence of 0 and 10% fetal bovine serum, non-cytotoxic and able to modify IBU or LID pharmacological activity in vivo. The synthesis of stimuli responsive surfactant, as an alternative to add pH-sensitive molecules to niosomes, could represent a promising delivery strategy for anesthetic and anti-inflammatory drugs.

Quantification of the cellular dose and characterization of nanoparticle transport during in vitro testing.

BACKGROUND: The constant increase of the use of nanomaterials in consumer products is making increasingly urgent that standardized and reliable in vitro test methods for toxicity screening be made available to the scientific community. For this purpose, the determination of the cellular dose, i.e. the amount of nanomaterials effectively in contact with the cells is fundamental for a trustworthy determination of nanomaterial dose responses. This has often been overlooked in the literature making it difficult to undertake a comparison of datasets from different studies. Characterization of the mechanisms involved in nanomaterial transport and the determination of the cellular dose is essential for the development of predictive numerical models and reliable in vitro screening methods. RESULTS: This work aims to relate key physico-chemical properties of gold nanoparticles (NPs) to the kinetics of their deposition on the cellular monolayer. Firstly, an extensive characterization of NPs in complete culture cell medium was performed to determine the diameter and the apparent mass density of the formed NP-serum protein complexes. Subsequently, the kinetics of deposition were studied by UV-vis absorbance measurements in the presence or absence of cells. The fraction of NPs deposited on the cellular layer was found to be highly dependent on NP size and apparent density because these two parameters influence the NP transport. The NP deposition occurred in two phases: phase 1, which consists of cellular uptake driven by the NP-cell affinity, and phase 2 consisting mainly of NP deposition onto the cellular membrane. CONCLUSION: The fraction of deposited NPs is very different from the initial concentration applied in the in vitro assay, and is highly dependent of the size and density of the NPs, on the associated transport rate and on the exposure duration. This study shows that an accurate characterization is needed and suitable experimental conditions such as initial concentration of NPs and liquid height in the wells has to be considered since they strongly influence the cellular dose and the nature of interactions of NPs with the cells.

Review of achievements of the OECD Working Party on Manufactured Nanomaterials' Testing and Assessment Programme. From exploratory testing to test guidelines.

This paper charts the almost ten years of history of OECD's work on nanosafety, during which the programme of the OECD on the Testing and Assessment of Manufactured Nanomaterials covered the testing of eleven nanomaterials for about 59 end-points addressing physical-chemical properties, mammalian and environmental toxicity, environmental fate and material safety. An overview of the materials tested, the test methods applied and the discussions regarding the applicability of the OECD test guidelines, which are recognised methods for regulatory testing of chemicals, are given. The results indicate that many existing OECD test guidelines are suitable for nanomaterials and consequently, hazard data collected using such guidelines will fall under OECD's system of Mutual Acceptance of Data (MAD) which is a legally binding instrument to facilitate the international acceptance of information for the regulatory safety assessment of chemicals. At the same time, some OECD test guidelines and guidance documents need to be adapted to address nanomaterials while new test guidelines and guidance documents may be needed to address endpoints that are more relevant to nanomaterials. This paper presents examples of areas where test guidelines or guidance for nanomaterials are under development.

Critical experimental evaluation of key methods to detect, size and quantify nanoparticulate silver.

Different analytical techniques, sedimentation flow field fractionation (SdFFF), asymmetrical flow field flow fractionation (AF4), centrifugal liquid sedimentation (CLS) and dynamic light scattering (DLS) have been used to give complementary size information about suspensions of silver nanoparticles (AgNPs) in the size range of 20-100 nm by taking advantage of the different physical principles on which are based. Particle morphology was controlled by TEM (Transmission Electron Microscopy). Both SdFFF and AF4 were able to accurately size all AgNPs; among sedimentation based techniques, CLS underestimated the average sizes of larger samples (70 and 100 nm), but it produced the best separation of bimodal mixtures Ag40/60 and Ag40/70 mix compared to SdFFF. On the contrary, DLS overestimated the average sizes of the smallest samples (20 and 30 nm) and it was unable to deal with bimodal mixtures. Quantitative mass and number particle size distributions were also calculated starting from UV-vis signals and ICP-MS data and the results evaluated as a means to address the issue of determining nanoparticle size distributions as required for implementation of European regulations relating to labeling of nanomaterials in consumer products. The results are discussed in light of possible particle aggregation state, analysis repeatability, size resolution and quantitative recoveries.

Solid-phase microextraction/gas chromatography-mass spectrometry method optimization for characterization of surface adsorption forces of nanoparticles.

A complete characterization of the different physico-chemical properties of nanoparticles (NPs) is necessary for the evaluation of their impact on health and environment. Among these properties, the surface characterization of the nanomaterial is the least developed and in many cases limited to the measurement of surface composition and zetapotential. The biological surface adsorption index approach (BSAI) for characterization of surface adsorption properties of NPs has recently been introduced (Xia et al. Nat Nanotechnol 5:671-675, 2010; Xia et al. ACS Nano 5(11):9074-9081, 2011). The BSAI approach offers in principle the possibility to characterize the different interaction forces exerted between a NP's surface and an organic--and by extension biological--entity. The present work further develops the BSAI approach and optimizes a solid-phase microextraction gas chromatography-mass spectrometry (SPME/GC-MS) method which, as an outcome, gives a better-defined quantification of the adsorption properties on NPs. We investigated the various aspects of the SPME/GC-MS method, including kinetics of adsorption of probe compounds on SPME fiber, kinetic of adsorption of probe compounds on NP's surface, and optimization of NP's concentration. The optimized conditions were then tested on 33 probe compounds and on Au NPs (15 nm) and SiO2 NPs (50 nm). The procedure allowed the identification of three compounds adsorbed by silica NPs and nine compounds by Au NPs, with equilibrium times which varied between 30 min and 12 h. Adsorption coefficients of 4.66 ± 0.23 and 4.44 ± 0.26 were calculated for 1-methylnaphtalene and biphenyl, compared to literature values of 4.89 and 5.18, respectively. The results demonstrated that the detailed optimization of the SPME/GC-MS method under various conditions is a critical factor and a prerequisite to the application of the BSAI approach as a tool to characterize surface adsorption properties of NPs and therefore to draw any further conclusions on their potential impact on health.

Gold nanoparticles downregulate interleukin-1ß-induced pro-inflammatory responses.

Interleukin 1 beta (IL-1ß)-dependent inflammatory disorders, such as rheumatoid arthritis and psoriasis, pose a serious medical burden worldwide, where patients face a lifetime of illness and treatment. Organogold compounds have been used since the 1930s to treat rheumatic and other IL-1ß-dependent diseases and, though their mechanisms of action are still unclear, there is evidence that gold interferes with the transmission of inflammatory signalling. Here we show for the first time that citrate-stabilized gold nanoparticles, in a size dependent manner, specifically downregulate cellular responses induced by IL-1ß both in vitro and in vivo. Our results indicate that the anti-inflammatory activity of gold nanoparticles is associated with an extracellular interaction with IL-1ß, thus opening potentially novel options for further therapeutic applications.

Microcontact printing and microspotting as methods for direct protein patterning on plasma deposited polyethylene oxide: application to stem cell patterning.

Two methods for protein patterning on antifouling surfaces have been applied to analyze the density and bioactivity of the proteins after deposition. Microcontact printing has been used as a technique to transfer fibronectin through conformal contact, while piezoelectric deposition has been employed as a non-contact technique for producing arrays of fibronectin (FN). Plasma deposited polyethylene oxide-like (PEO-like) films have been used as non-fouling background to achieve the bioadhesive/biorepellent surface contrast. Both patterning methods allow the direct fabrication of protein arrays on a non-fouling substrate, and the subsequent formation of a pattern of stem cells by cell attachment on the arrayed substrates. Microcontact printing produced fully packed homogeneous fibronectin patterns, much denser than microspotted patterns. Both printing and spotting technologies generated functional protein arrays, their bioactivity being primarily modulated by the density of the deposited protein layer. Optimization of the FN parameters used for deposition has lead to the achievement of high-quality microarrays with large population of neural stem cells immobilized in the patterns in serum-free conditions, where cells exhibit a more homogeneous starting population and factors influencing fate decisions can be more easily tracked. The immunorecognition of fibronectin targeted antibodies, as well as the cell density, increase with the protein density up to a saturation point. Over 100 ng/cm² of fibronectin on the surface leads to a decrease in the number of attached cells and a raise of cell spreading.

Predictive toxicology of cobalt ferrite nanoparticles: comparative in-vitro study of different cellular models using methods of knowledge discovery from data.

BACKGROUND: Cobalt-ferrite nanoparticles (Co-Fe NPs) are attractive for nanotechnology-based therapies. Thus, exploring their effect on viability of seven different cell lines representing different organs of the human body is highly important. METHODS: The toxicological effects of Co-Fe NPs were studied by in-vitro exposure of A549 and NCIH441 cell-lines (lung), precision-cut lung slices from rat, HepG2 cell-line (liver), MDCK cell-line (kidney), Caco-2 TC7 cell-line (intestine), TK6 (lymphoblasts) and primary mouse dendritic-cells. Toxicity was examined following exposure to Co-Fe NPs in the concentration range of 0.05 -1.2 mM for 24 and 72 h, using Alamar blue, MTT and neutral red assays. Changes in oxidative stress were determined by a dichlorodihydrofluorescein diacetate based assay. Data analysis and predictive modeling of the obtained data sets were executed by employing methods of Knowledge Discovery from Data with emphasis on a decision tree model (J48). RESULTS: Different dose-response curves of cell viability were obtained for each of the seven cell lines upon exposure to Co-Fe NPs. Increase of oxidative stress was induced by Co-Fe NPs and found to be dependent on the cell type. A high linear correlation (R2=0.97) was found between the toxicity of Co-Fe NPs and the extent of ROS generation following their exposure to Co-Fe NPs. The algorithm we applied to model the observed toxicity belongs to a type of supervised classifier. The decision tree model yielded the following order with decrease of the ranking parameter: NP concentrations (as the most influencing parameter), cell type (possessing the following hierarchy of cell sensitivity towards viability decrease: TK6 > Lung slices > NCIH441 > Caco-2 = MDCK > A549 > HepG2 = Dendritic) and time of exposure, where the highest-ranking parameter (NP concentration) provides the highest information gain with respect to toxicity. The validity of the chosen decision tree model J48 was established by yielding a higher accuracy than that of the well-known "naive bayes" classifier. CONCLUSIONS: The observed correlation between the oxidative stress, caused by the presence of the Co-Fe NPs, with the hierarchy of sensitivity of the different cell types towards toxicity, suggests that oxidative stress is one possible mechanism for the toxicity of Co-Fe NPs.

Nanopatterned submicron pores as a shield for nonspecific binding in surface plasmon resonance-based sensing.

We present a novel approach to tackle the most common drawback of using surface plasmon resonance for analyte screening in complex biological matrices--the nonspecific binding to the sensor chip surface. By using a perforated membrane supported by a polymeric gel structure at the evanescent wave penetration depth, we have fabricated a non-fouling sieve above the sensing region. The sieve shields the evanescent wave from nonspecific interactions which interfere with SPR sensing by minimizing the fouled area of the polymeric gel and preventing the translocation of large particles, e.g. micelles or aggregates. The nanopatterned macropores were fabricated by means of colloidal lithography and plasma enhanced chemical vapor deposition of a polyethylene oxide-like film on top of a polymeric gel matrix commonly used in surface plasmon resonance analysis. The sieve was characterized using surface plasmon resonance imaging, contact angle, atomic force microscopy and scanning electron microscopy. The performance of the sieve was studied using an immunoassay for detection of antibiotic residues in full fat milk and porcine serum. The non-fouling membrane presented pores in the 92-138 nm range organized in a hexagonal crystal lattice with a clearance of about 5% of the total surface. Functionally, the membrane with the nanopatterned macropores showed significant improvements in immunoassay robustness and sensitivity in untreated complex samples. The utilization of the sensor built-in sieve for measurements in complex matrices offers reduction in pre-analytical sample preparation steps and thus shortens the total analysis time.

Effects of silver nanoparticles in diatom Thalassiosira pseudonana and cyanobacterium Synechococcus sp.

The aim of the present study was to investigate the effect of silver nanoparticles (AgNP) of different sizes toward two primary producer aquatic species. Thalassiosira pseudonana and Synechococcus sp. have been selected as representative models for the lower trophic organisms in marine and freshwater habitats, respectively. Time-dependent cellular growth was measured upon exposure to both AgNP and silver nitrate (AgNO(3)). In addition, AgNP behavior in freshwater and marine waters has been followed by CPS disc centrifuge, in the time frame of AgNP exposure studies, and the kinetic release of silver from AgNP of different sizes was measured by dialysis and inductively coupled plasma mass spectrometry (ICP-MS). The combination and interpretation of all these data suggest that a shared effect of AgNP and released silver was responsible for the toxicity in both organisms. Furthermore, the toxic effects induced by AgNP exposure in the present study seem to result from a mixture of parameters including aggregated state, size of the AgNP, stability of the preparation, and speciation of the released silver.

Amorphous silica nanoparticles do not induce cytotoxicity, cell transformation or genotoxicity in Balb/3T3 mouse fibroblasts.

Although amorphous silica nanoparticles (aSiO(2)NPs) are believed to be non-toxic and are currently used in several industrial and biomedical applications including cosmetics, food additives and drug delivery systems, there is still no conclusive information on their cytotoxic, genotoxic and carcinogenic potential. For this reason, this work has investigated the effects of aSiO(2)NPs on Balb/3T3 mouse fibroblasts, focusing on cytotoxicity, cell transformation and genotoxicity. Results obtained using aSiO(2)NPs, with diameters between 15 nm and 300 nm and exposure times up to 72 h, have not shown any cytotoxic effect on Balb/3T3 cells as measured by the MTT test and the Colony Forming Efficiency (CFE) assay. Furthermore, aSiO(2)NPs have induced no morphological transformation in Balb/3T3 cells and have not resulted in genotoxicity, as shown by Cell Transformation Assay (CTA) and Micronucleus (MN) assay, respectively. To understand whether the absence of any toxic effect could result from a lack of internalization of the aSiO(2)NPs by Balb/3T3 cells, we have investigated the uptake and the intracellular distribution following exposure to 85 nm fluorescently-labelled aSiO(2)NPs. Using fluorescence microscopy, it was observed that fluorescent aSiO(2)NPs are internalized and located exclusively in the cytoplasmic region. In conclusion, we have demonstrated that although aSiO(2)NPs are internalized in vitro by Balb/3T3 mouse fibroblasts, they do not trigger any cytotoxic or genotoxic effect and do not induce morphological transformation, suggesting that they might be a useful component in industrial applications.

Measuring protein structure and stability of protein-nanoparticle systems with synchrotron radiation circular dichroism.

We measure the structural and stability changes of proteins at nanomolar concentration upon interaction with nanoparticles. Using synchrotron radiation circular dichroism (SRCD), we measure a decrease of 6 °C in the thermal unfolding of human serum albumin upon interaction with silver nanoparticles while this does not happen with gold. The use of SRCD allows measuring critical parameters on protein-nanoparticle interactions, and it will provide experimental data on the relative stability of key biological proteins for nanotoxicology.

Nanostructure protein repellant amphiphilic copolymer coatings with optimized surface energy by Inductively Excited Low Pressure Plasma.

Statistically designed amphiphilic copolymer coatings were deposited onto Thermanox, Si wafer, and quartz crystal microbalance (QCM) substrates via Plasma Enhanced Chemical Vapor Deposition of 1H,1H,2H,2H-perfluorodecyl acrylate and diethylene glycol vinyl ether in an Inductively Excited Low Pressure Plasma reactor. Plasma deposited amphiphilic coatings were characterized by Field Emission Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy, Atomic Force Microscopy, and Water Contact Angle techniques. The surface energy of the coatings can be adjusted between 12 and 70 mJ/m(2). The roughness of the coatings can be tailored depending on the plasma mode used. A very smooth coating was deposited with a CW (continuous wave) power, whereas a rougher surface with R(a) in the range of 2 to 12 nm was deposited with the PW (pulsed wave) mode. The nanometer scale roughness of amphiphilic PFDA-co-DEGVE coatings was found to be in the range of the size of the two proteins namely BSA and lysozyme used to examine for the antifouling properties of the surfaces. The results show that the statistically designed surfaces, presenting a surface energy around 25 mJ/m(2), present no adhesion with respect to both proteins measured by QCM.

Problems and challenges in the development and validation of human cell-based assays to determine nanoparticle-induced immunomodulatory effects.

BACKGROUND: With the increasing use of nanomaterials, the need for methods and assays to examine their immunosafety is becoming urgent, in particular for nanomaterials that are deliberately administered to human subjects (as in the case of nanomedicines). To obtain reliable results, standardised in vitro immunotoxicological tests should be used to determine the effects of engineered nanoparticles on human immune responses. However, before assays can be standardised, it is important that suitable methods are established and validated. RESULTS: In a collaborative work between European laboratories, existing immunological and toxicological in vitro assays were tested and compared for their suitability to test effects of nanoparticles on immune responses. The prototypical nanoparticles used were metal (oxide) particles, either custom-generated by wet synthesis or commercially available as powders. Several problems and challenges were encountered during assay validation, ranging from particle agglomeration in biological media and optical interference with assay systems, to chemical immunotoxicity of solvents and contamination with endotoxin. CONCLUSION: The problems that were encountered in the immunological assay systems used in this study, such as chemical or endotoxin contamination and optical interference caused by the dense material, significantly affected the data obtained. These problems have to be solved to enable the development of reliable assays for the assessment of nano-immunosafety.

Protein--nanoparticle interaction: identification of the ubiquitin--gold nanoparticle interaction site.

We demonstrate that it is possible to identify the protein--nanoparticle interaction site at amino acid scale in solution. Using NMR, chemical shift perturbation analysis, and dynamic light scattering we have identified a specific domain of human ubiquitin that interacts with gold nanoparticles. This method allows a detailed structural analysis of proteins absorbed onto surfaces of nanoparticles in physiological conditions and it will provide much needed experimental data for better modeling and prediction of protein--nanoparticle interactions.

Elimination of biological contaminations from surfaces by plasma discharges: chemical sputtering.

Plasma treatment of surfaces as a sterilisation or decontamination method is a promising approach to overcome limitations of conventional techniques. The precise characterisation of the employed plasma discharges, the application of sensitive surface diagnostic methods and targeted experiments to separate the effects of different agents, have led to rapid progress in the understanding of different relevant elementary processes. This contribution provides an overview of the most relevant and recent results, which reveal the importance of chemical sputtering as one of the most important processes for the elimination of biological residuals. Selected studies on the interaction of plasmas with bacteria, proteins and polypeptides are highlighted, and investigations employing beams of atoms and ions confirming the prominent role of chemical sputtering are presented. With this knowledge, it is possible to optimize the plasma treatment for decontamination/sterilisation purposes in terms of discharge composition, density of active species and UV radiation intensity.

Synthesis of Citrate-Stabilized Silver Nanoparticles Modified by Thermal and pH Preconditioned Tannic Acid.

Silver nanoparticles (AgNPs) may be synthesized by many different methods, with those based on the thermal reduction of silver salts by citric acid or citric acid/tannic acid being amongst the most commonly used. These methods, although widely used and technically simple, can produce particles in which the size, polydispersivity and morphology can vary greatly. In this work nearly mono-dispersed spherical AgNPs have been synthesized via a one-step reduction method by using sodium citrate and varying quantities of Tannic Acid (TA), which was thermally conditioned prior to use in the growth process. It was found that the final size can be further tailored by controlling the amount of TA and the thermal conditioning of the TA at 60 °C at different time points, which changes the size and polydispersivity of AgNPs. To better understand the origin of this effect, optical spectroscopic analysis and 1H NMR of the TA following mild thermal conditioning of the solution have been done. Comparison of thermally conditioned TA and TA exposed to basic pH shows that similar chemical modifications occur and consequently produce similar effects on growth when used in the synthesis of AgNPs. It is proposed that thermal preconditioning of the TA introduces either chemical or structural changes, which decrease the final particle size under a given total silver content.

Genotoxicity and morphological transformation induced by cobalt nanoparticles and cobalt chloride: an in vitro study in Balb/3T3 mouse fibroblasts.

Nanotechnology is an emerging field that involves the development, manufacture and measurement of materials and systems in the submicron to nanometer range. Its development is expected to have a large socio-economical impact in practically all fields of industrial activity. However, there is still a lack of information about the potential risks of manufactured nanoparticles for the environment and for human health. In this work, we studied the cytotoxicity, genotoxicity and morphological transforming activity of cobalt nanoparticles (Co-nano) and cobalt ions (Co(2+)) in Balb/3T3 cells. We also evaluated Co-nano dissolution in culture medium and cellular uptake of both Co-nano and Co(2+). Our results indicated dose-dependent cytotoxicity, assessed by colony-forming efficiency test, for both compounds. The toxicity was higher for Co-nano than for Co(2) after 2 and 24 h of exposure, while dose-effect relationships were overlapping after 72 h. Statistically significant results were observed for Co-nano with the micronucleus test and the comet assay, while for Co(2+) positive results were observed only with the latter. In addition, even when Co-nano was genotoxic (at >1 microM), no evident dose-dependent effect was observed. Concerning morphological transformation, we found a statistically significant increase in the formation of type III foci (morphologically transformed colonies) only for Co-nano. Furthermore, we observed a higher cellular uptake of Co-nano compared with Co(2+).