[Validation Study on Developed Methods for Anions and Bromic Acid in Various Mineral Waters by Ion Chromatography].

Five kinds of anions namely fluoride, chlorate, chlorite, nitrate and nitrite ions, and bromic acid were determined in various mineral waters (MWs), and the methods were validated. MWs are varying in the degree of hardness and contents of carbonate. When the five anions were measured based on the official method of tap water, the peak shape of fluoride ion in MWs with high degree of hardness was different from the standard solution, making it difficult to determine. The same phenomenon was also observed when bromic acid was measured. In order to achieve accurate determination, five-fold dilution with ultrapure water was carried out on the samples. With the additional step, the abnormal peak of both analytes was improved, and no difference in the retention times between standard and sample solutions was observed. The validation tests were performed using the developed methods with the additional diluting step, and the results of all target substances met the criteria of the guideline on analytical method validation for MW in Japan. Our results suggested that the methods we developed could be useful for the accurate determination of the anions and bromic acid in various MWs on the market.

[Validation Study on Developed Methods for Total Organic Carbon in Some Kinds of Mineral Water].

Total organic carbon (TOC) was measured in some kinds of mineral water, and the method was validated. In mineral water, there are many kinds of elements such as carbon dioxide and a wide range of hardness. The official method for amount of TOC in tap water was validated in non-carbonated mineral water regardless of the degree of hardness. However, the amount of TOC was not accurately measured in two kinds of carbonated mineral water with medium or high degree of hardness. In our method of this study, the removal of carbon dioxide from the two kinds of mineral water was achieved by making bubbling time longer and additive rate of HCl upper than the official condition of tap water. And then, the method we developed was validated in the two kinds of mineral water. Our results suggested that the method we developed could be useful to measure the amount of TOC in many kinds of mineral water on the market.

Enhanced butanol production by eukaryotic Saccharomyces cerevisiae engineered to contain an improved pathway.

Compared with ethanol, butanol has more advantageous physical properties as a fuel, and biobutanol is thus considered a promising biofuel material. Biobutanol has often been produced by Clostridium species; however, because they are strictly anaerobic microorganisms, these species are challenging to work with. We attempted to introduce the butanol production pathway into yeast Saccharomyces cerevisiae, which is a well-known microorganism that is tolerant to organic solvents. 1-Butanol was found to be produced at very low levels when the butanol production pathway of Clostridium acetobutylicum was simply introduced into S. cerevisiae. The elimination of glycerol production pathway in the yeast contributed to the enhancement of 1-butanol production. In addition, by the use of trans-enoyl-CoA reductase in the engineered pathway, 1-butanol production was markedly enhanced to yield 14.1 mg/L after 48 h of cultivation.

Molecular breeding of advanced microorganisms for biofuel production.

Large amounts of fossil fuels are consumed every day in spite of increasing environmental problems. To preserve the environment and construct a sustainable society, the use of biofuels derived from different kinds of biomass is being practiced worldwide. Although bioethanol has been largely produced, it commonly requires food crops such as corn and sugar cane as substrates. To develop a sustainable energy supply, cellulosic biomass should be used for bioethanol production instead of grain biomass. For this purpose, cell surface engineering technology is a very promising method. In biobutanol and biodiesel production, engineered host fermentation has attracted much attention; however, this method has many limitations such as low productivity and low solvent tolerance of microorganisms. Despite these problems, biofuels such as bioethanol, biobutanol, and biodiesel are potential energy sources that can help establish a sustainable society.

[Interlaboratory Study on Evaporation Residue Test for Food Contact Products (Report 1)].

An interlaboratory study was performed to evaluate the equivalence between an official method and a modified method of evaporation residue test using three food-simulating solvents (water, 4% acetic acid and 20% ethanol), based on the Japanese Food Sanitation Law for food contact products. Twenty-three laboratories participated, and tested the evaporation residues of nine test solutions as blind duplicates. For evaporation, a water bath was used in the official method, and a hot plate in the modified method. In most laboratories, the test solutions were heated until just prior to evaporation to dryness, and then allowed to dry under residual heat. Statistical analysis revealed that there was no significant difference between the two methods, regardless of the heating equipment used. Accordingly, the modified method provides performance equal to the official method, and is available as an alternative method.

[Interlaboratory Study on Evaporation Residue Test for Food Contact Products (Report 2)].

An interlaboratory study was performed to evaluate the equivalence between an official method and a modified method of evaporation residue test using heptane as a food-simulating solvent for oily or fatty foods, based on the Japanese Food Sanitation Law for food contact products. Twenty-three laboratories participated, and tested the evaporation residues of nine test solutions as blind duplicates. In the official method, heating for evaporation was done with a water bath. In the modified method, a hot plate was used for evaporation, and/or a vacuum concentration procedure was skipped. In most laboratories, the test solutions were heated until just prior to dryness, and then allowed to dry under residual heat. Statistical analysis revealed that there was no significant difference between the two methods. Accordingly, the modified method provides performance equal to the official method, and is available as an alternative method. Furthermore, an interlaboratory study was performed to evaluate and compare two leaching solutions (95% ethanol and isooctane) used as food-simulating solvents for oily or fatty foods in the EU. The results demonstrated that there was no significant difference between heptane and these two leaching solutions.

Display of Clostridium cellulovorans xylose isomerase on the cell surface of Saccharomyces cerevisiae and its direct application to xylose fermentation.

Xylose isomerase (XI) is a key enzyme in the conversion of D-xylose, which is a major component of lignocellulosic biomass, to D-xylulose. Genomic analysis of the bacterium Clostridium cellulovorans revealed the presence of XI-related genes. In this study, XI derived from C. cellulovorans was produced and displayed using the yeast cell-surface display system, and the xylose assimilation and fermentation properties of this XI-displaying yeast were examined. XI-displaying yeast grew well in medium containing xylose as the sole carbon source and directly produced ethanol from xylose under anaerobic conditions.

Fixation of CO2 in Clostridium cellulovorans analyzed by 13C-isotopomer-based target metabolomics.

Clostridium cellulovorans has been one of promising microorganisms to use biomass efficiently; however the basic metabolic pathways have not been completely known. We carried out 13C-isotopomer-based target metabolome analysis, or carbohydrate conversion process analysis, for more profound understanding of metabolic pathways of the bacterium. Our findings that pyruvate + oxaloacetate, fumarate, and malate inside and outside cells exhibited 13C incorporation suggest that C. cellulovorans exactly fixed CO2 and partly operated the TCA cycle in a reductive manner. Accompanied with CO2 fixation, the microorganism was also found to produce and secrete lactate. Overall, our study demonstrates that a part of C. cellulovorans metabolic pathways related to glycolysis and the TCA cycle are involved in CO2 fixation.