In vitro effect of calcium nanophosphate and high-concentrated fluoride agents on enamel erosion: an AFM study.

BACKGROUND: Calcium nanophosphate paste can provide ions to remineralize enamel. There are, however, no data available about the remineralizing effect of this paste on the prevention of enamel erosion, when compared with highly concentrated fluoride agents. AIM: To analyze the effect of calcium nanophosphate paste, fluoride gel, and varnish to protect against enamel erosion using surface Knoop hardness (KNH) and atomic force microscopy (AFM). DESIGN: Forty enamel blocks (4 × 4 mm) of third molars were used for 4 groups (n = 10): 1.23% fluoride gel (Fluorgel-DFL(®) ); calcium nanophosphate paste (Desensibilize NanoP-FGM(®) ); fluoride varnish (Duraphat-Colgate(®) ) and control (without agent). The specimens were immersed in cola drink for 5 min and 2 h in artificial saliva, 4× per day for 5 days. The agents were applied before the first erosive cycle. KNH values were obtained before and after the erosive challenge. The surface morphology was evaluated by AFM. anova, Tukey's, and T-Student tests were applied. RESULTS: After erosion, no significant difference was found for KNH among gel, nanophosphate, and varnish groups; however, they showed higher KNH than control group. Gel and nanophosphate paste showed a protective layer formation on enamel surface by AFM. CONCLUSIONS: The calcium nanophosphate paste showed similar protection against enamel erosion compared with high-concentrated fluoride agents, even containing lower fluoride concentration.

Validity and reliability of the Brazilian version of the Illness Perception Questionnaire-Revised for Dental.

This study aimed to test the validity and reliability of the Brazilian version of the "Illness Perception Questionnaire-Revised for Dental" (IPQ-RD) in parents/guardians of children aged six to 14 years. The sample consisted of 63 parents/guardians of schoolchildren from the municipal school system of Teófilo Otoni, MG. Remote and virtual data collection consisted of self-completion of personal data, socioeconomic questionnaire and the Brazilian short versions of the "Parental-Caregiver Perceptions Questionnaire" (16-P-CPQ) and the "Family Impact Scale" (4-FIS). The IPQ-RD was applied by telephone interview. Almost half of the sample belonged to socioeconomic classes C1 and C2. Approximately 1/3 classified their child's oral health as "regular" or "poor", while 11.1% reported "strong" or "very strong" impact on their child's well-being. The items most frequently cited as having an impact on the four domains of the 16-P-CPQ were: "bad breath" (23.8%), "mouth breathing" (20.7%), "feeling anxious or afraid" (20.7%), and "paying attention at school" (10%). In the 4-FIS, 11.1% "had little time for themselves or the family". There were higher IPQ-RD scores in the "disease coherence" domain for women and lower values of "emotional dimensions" for parents/guardians with incomplete education. The mean IPQ-RD score was 126.4 (±15.1), and domain scores were positively correlated. The internal consistency was "almost perfect" for the IPQ-RD total score, ranging from "moderate" to "almost perfect" for the "child-control" and "child-consequences" domains. The intraclass correlation coefficient ranged from 0.04 (poor) to 0.68 (substantial). The Brazilian Portuguese version of the IPQ-RD proved to be valid and reliable for assessing the cognitive and emotional perception of parents/guardians about childhood dental caries.

Synthesis of a chitosan nanoparticle suspension and its protective effects against enamel demineralization after an in vitro cariogenic challenge.

OBJECTIVE: Our study aims to synthesize, characterize, and determine the effects of a ChNPs suspension on human enamel after cariogenic challenge via pH-cycling. METHODOLOGY: ChNPs were synthesized by ion gelation and characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering. Forty enamel blocks were divided into four groups (n=10/group): (i) ChNPs suspension; (ii) chitosan solution; (iii) 0.05% sodium fluoride (NaF) solution; and (iv) distilled water. Specimens were exposed to cariogenic challenge by cycling in demineralization solution (3 h) and then remineralized (21h) for 7 days. Before each demineralization cycle, the corresponding solutions were passively applied for 90 s. After 7 days, specimens were examined for surface roughness (Ra) and Knoop hardness (KHN) before and after the cariogenic challenge; % KHN change (variation between initial and final hardness), and surface topography by an optical profilometer. The data were analyzed by repeated-measures ANOVA, One-way ANOVA, and Tukey tests (α=0.05). RESULTS: TEM images showed small spherical particles with diameter and zeta potential values of 79.3 nm and +47.9 mV, respectively. After the challenge, all groups showed an increase in Ra and a decrease in KHN values. Optical profilometry indicated that ChNPs- and NaF-treated specimens showed uneven roughness interspersed with smooth areas and the lowest %KHN values. CONCLUSION: The ChNPs suspension was successfully synthesized and minimized human enamel demineralization after a cariogenic challenge, showing an interesting potential for use as an oral formulation for caries prevention.

Validity and reliability of the Brazilian version of the Illness Perception Questionnaire-Revised for Dental

Abstract This study aimed to test the validity and reliability of the Brazilian version of the "Illness Perception Questionnaire-Revised for Dental" (IPQ-RD) in parents/guardians of children aged six to 14 years. The sample consisted of 63 parents/guardians of schoolchildren from the municipal school system of Teófilo Otoni, MG. Remote and virtual data collection consisted of self-completion of personal data, socioeconomic questionnaire and the Brazilian short versions of the "Parental-Caregiver Perceptions Questionnaire" (16-P-CPQ) and the "Family Impact Scale" (4-FIS). The IPQ-RD was applied by telephone interview. Almost half of the sample belonged to socioeconomic classes C1 and C2. Approximately 1/3 classified their child's oral health as "regular" or "poor", while 11.1% reported "strong" or "very strong" impact on their child's well-being. The items most frequently cited as having an impact on the four domains of the 16-P-CPQ were: "bad breath" (23.8%), "mouth breathing" (20.7%), "feeling anxious or afraid" (20.7%), and "paying attention at school" (10%). In the 4-FIS, 11.1% "had little time for themselves or the family". There were higher IPQ-RD scores in the "disease coherence" domain for women and lower values of "emotional dimensions" for parents/guardians with incomplete education. The mean IPQ-RD score was 126.4 (±15.1), and domain scores were positively correlated. The internal consistency was "almost perfect" for the IPQ-RD total score, ranging from "moderate" to "almost perfect" for the "child-control" and "child-consequences" domains. The intraclass correlation coefficient ranged from 0.04 (poor) to 0.68 (substantial). The Brazilian Portuguese version of the IPQ-RD proved to be valid and reliable for assessing the cognitive and emotional perception of parents/guardians about childhood dental caries.

TiF4 varnish protects the retention of brackets to enamel after in vitro mild erosive challenge.

The effect of fluoride agents on the retention of orthodontic brackets to enamel under erosive challenge is little investigated. The aim of this study was to evaluate the effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) agents on the shear bond strength of brackets to enamel and on the enamel microhardness around brackets under erosive challenge. Brackets were bonded to bovine incisors. Five groups were formed according to fluoride application (n=10): TiF4 varnish, TiF4 solution, NaF varnish, NaF solution and control (without application). The specimens were submitted to erosive challenge (90 s cola drink/2h artificial saliva, 4x per day for 7 days). Solutions were applied before each erosive cycle and varnishes were applied once. Vickers Microhardness (VHN) was obtained before and after all cycles of erosion and the percentage of microhardness loss was calculated. Shear bond strength, adhesive remnant index and polarized light microscopy were conducted after erosion. The data were analyzed by ANOVA, Tukey, Kruskal-Wallis and Mann-Whitney U tests (α=0.05). The %VHN had no statistically significant differences among the experimental groups. However, considering the comparisons of all groups with the control group, TiF4 varnish showed the highest protection from enamel demineralization (effect size of 2.94, while the effect size for the other groups was >2.4). The TiF4 varnish group had significantly higher shear bond strength compared to other groups. There was no difference among groups for adhesive remnant index. Polarized light microscopy showed higher demineralization depth for the control group. Application of NaF and TiF4 agents during mild erosive challenge minimized the enamel mineral loss around brackets, however only the experimental TiF4 varnish was able to prevent the reduction of shear bond strength of brackets to enamel.

Comparison of the reproducibility of two cervical vertebrae maturation methods

Aim: Facial orthopaedic treatments based on the stimulation or restrictions of craniofacial bone growth are more effective when carried out during the pubertal growth spurt. The aim of this cross-sectional study was to evaluate the reproducibility of two cervical vertebrae methods (CVM) with manual tracing and direct visual inspection. Methods: A sample of 60 lateral cephalometric radiographs (10 of each of the 6 CVM stages) was randomly selected from 171 records. 5 orthodontists classified these radiographs according to the skeletal maturation stage in 2002 and 2005, and the application of both methods was conducted by direct visual inspection and evaluation through manual tracing. Results: The average reliability of the two methods determination and the two forms of evaluation was substantial. The direct visual inspection evaluation showed the highest reliability and agreement interexaminer values for both methods, as well as the intraexaminers evaluation. Conclusion: The reproducibility of CVM method was substantial, indicating its clinical use to determine the skeletal maturity and the ideal moment for treatment execution

Synthesis of a chitosan nanoparticle suspension and its protective effects against enamel demineralization after an in vitro cariogenic challenge

Abstract Objective Our study aims to synthesize, characterize, and determine the effects of a ChNPs suspension on human enamel after cariogenic challenge via pH-cycling. Methodology ChNPs were synthesized by ion gelation and characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering. Forty enamel blocks were divided into four groups (n=10/group): (i) ChNPs suspension; (ii) chitosan solution; (iii) 0.05% sodium fluoride (NaF) solution; and (iv) distilled water. Specimens were exposed to cariogenic challenge by cycling in demineralization solution (3 h) and then remineralized (21h) for 7 days. Before each demineralization cycle, the corresponding solutions were passively applied for 90 s. After 7 days, specimens were examined for surface roughness (Ra) and Knoop hardness (KHN) before and after the cariogenic challenge; % KHN change (variation between initial and final hardness), and surface topography by an optical profilometer. The data were analyzed by repeated-measures ANOVA, One-way ANOVA, and Tukey tests (α=0.05). Results TEM images showed small spherical particles with diameter and zeta potential values of 79.3 nm and +47.9 mV, respectively. After the challenge, all groups showed an increase in Ra and a decrease in KHN values. Optical profilometry indicated that ChNPs- and NaF-treated specimens showed uneven roughness interspersed with smooth areas and the lowest %KHN values. Conclusion The ChNPs suspension was successfully synthesized and minimized human enamel demineralization after a cariogenic challenge, showing an interesting potential for use as an oral formulation for caries prevention.

Weight-loss and surface roughness of enamel after microabrasion procedure with different agents / Perda de peso e rugosidade da superfície do esmalte após procedimento de microabrasão com diferentes agentes

Introduction: Enamel microabrasion is achieved by abrasion of the enamel surface and it is a quick, practical and efficient procedure. Objective It was assessed the weight loss and surface aspect of enamel after microabrasion procedures with commercial and mixtures made in-office. Material and method Eighty bovine incisors were divided into four groups (n=10): OpalustreTM (6.6% HCl + silicon carbide); Whiteness RMTM (6% HCl + silicon carbide); 37% H3PO4 + pumice and 10% HCl + pumice. Treatment was performed by 15 applications of 10s duration. The enamel weight loss was determined by the difference in weight before and after the microabrasion. The surfaces were analyzed by a surface roughness equipment and scanning electron microscopy. Data were submitted to paired-T test, one-way ANOVA and Tukey tests (α=0.05). Result It was observed significantly weight loss for all groups. The difference in weight loss ranged from 0.037±0.012 for group 37% H3PO4 and from 0.054±0.009 for group 6,6% HCl. There was a significant increase in surface roughness for all groups and 10% HCl group showed the lower results (0.65±0.09). It was observed different patterns of enamel morphology by SEM images. Conclusion The in-office mixtures resulted in the lowest enamel structure loss (37% H3PO4) and the lowest surface roughness (10% HCl).

Introdução: A microabrasão do esmalte é realizada através da abrasão da superfície do mesmo, apresentando-se como um procedimento rápido, prático e eficiente. Objetivo Avaliar a perda de peso e o aspecto superficial do esmalte após procedimentos de microabrasão com agentes comerciais e não comerciais. Material e método Oitenta incisivos bovinos foram divididos em quatro grupos (n = 10): OpalustreTM (6,6% HCl + carboneto de silício); Whiteness RMTM (6% HCl + carboneto de silício); 37% H3PO4 + pedra-pomes e 10% HCl + pedra-pomes. O tratamento foi realizado em 15 aplicações de 10s de duração. A perda de peso do esmalte foi determinada pela diferença de peso antes e depois da microabrasão. As superfícies foram analisadas por equipamento de rugosidade superficial e microscopia eletrônica de varredura. Os dados foram submetidos ao teste T-pareado, ANOVA one-way e teste de Tukey (α = 0,05). Resultado Foi observada perda de peso significativa para todos os grupos, a diferença na perda de peso variou de -0,037±0,012 para o grupo 37% H3PO4 a -0.054±0.009 para o grupo 6.6% HCl. Houve um aumento significativo na rugosidade da superfície para todos os grupos e o grupo 10%HCl apresentou os resultados mais baixos (0,65±0,09). Foram observados diferentes padrões de morfologia do esmalte por meio de imagens MEV. Conclusão Os agentes não comerciais resultaram na menor perda de estrutura do esmalte (37% H3PO4) e na rugosidade superficial (10% HCl).

A higiene bucal de bebês edêntulos e sua influência na microbiota bucal: os profissionais de saúde devem preconizá-la? ­ revisão crítica / Oral hygiene in edentulous infants and its influence on oral microbiota: should the health professionals recommend it? ­ a critical review

Introdução: A indicação de higiene bucal em bebês edêntulos entre os profissionais de saúde ainda é controversa, sendo necessária a busca científica sobre esta indicação e a padronização da informação. Objetivo: Investigar criticamente as evidências relacionadas a indicação da higiene bucal para bebês edêntulos. Métodos: A busca de artigos foi realizada nas bases de dados PubMed, LILACS e Google Scholar, de modo a avaliar a seguinte pergunta: "A higienização da cavidade bucal de bebês edêntulos pode influenciar a microbiota bucal?". Uma busca em 8 livros de Odontopediatria também foi realizada. Resultados: Foram encontrados 317 artigos (167-PubMed, 146-Google Scholar e 4-LILACS). Não foram encontrados estudos primários que avaliaram o efeito da higiene bucal em bebês edêntulos na microbiota, impossibilitando a condução de revisão sistemática. Assim, para a revisão foram incluídos 6 estudos que investigaram micro-organismos na cavidade bucal de bebês edêntulos e o papel das imunoglobulinas salivares. Dentre os livros avaliados, somente 4 indicaram a higiene bucal em bebês edêntulos. Conclusão: Diante dos dados analisados, não existem estudos primários que avaliaram o efeito da higienização na microbiota bucal de bebês edêntulos. Torna-se relevante a condução de estudos clínicos para obtenção de evidências científicas sobre a indicação ou não da higienização da cavidade bucal de bebês edêntulos.

Introduction: The indication of oral hygiene in edentulous babies is still controversial among health professionals, being necessary the search of this recommendation and the standardization of information. Objective: To inves-tigate critically the evidence related to the indication of oral hygiene for edentulous babies. Methods: The search for articles was performed in the PubMed, LILACS and Google Scholar databases, in order to assess the following question: "Can oral cavity hygiene of edentulous babies influence oral microbiota?" A search in 8 books of Pediatric Dentistry was also performed. Results: 317 articles were found (167-PubMed, 146-Google Scholar and 4-LILACS). There were no primary studies that evalu-ated the effect of oral hygiene of edentulous infants on microbiota, which impair the conduction of a systematic review. Thus, it was included for this review six studies that investigated microorganisms in the oral cavity of edentulous infants and the role of salivary immunoglo- bulins. Among the textbooks evaluated, only 4 indicated the oral hygiene in edentulous infants. Conclusion:According to the data, there are no primary studies that assessed the effect of oral hygiene in the oral microbiota of edentulous babies. It is relevant to conduct clinical studies in order to obtain scientific evidence about the indication or no of the oral hygiene in edentulous babies

Histological analysis of biocompatibility of ionomer cements with an acid-base reaction.

The purpose of this study was to evaluate the inflammatory and cure events of acid-based reactions using glass ionomer cement used for cementation of crowns, bridges, onlays and orthodontic bands implanted in subcutaneous tissue, at different time intervals. A total of 48 male Wistar rats were used, distributed into 4 groups (n = 12), as follows: Group C (control, polyethylene), Group ME (Meron), Group KC (Ketac Cem) and Group PR (Precedent). The animals were sacrificed after time intervals of 7, 15 and 30 days, and their tissues were analyzed under an optical microscope for such events as inflammatory infiltrate, edema, necrosis, granulation tissue, multinucleated giant cells, young fibroblasts and collagen. The results was assessed using Kruskal-Wallis and Dunn's tests (p < 0.05). In the initial period, intense inflammatory infiltrate was observed for all the materials with no significant difference among them (p = 0.104). Groups PR and KC showed significant difference in relation to Group C, at 7 days (p = 0.025) and 15 days (p = 0.006). Edema and giant cells were more expressive in Group ME, differing significantly from Groups C (p = 0.023) and KC (p = 0.039), respectively, at 7 days. Group ME showed a statistically significant difference in relation to Groups PR and KC for the presence of young fibroblasts (p = 0.009) and for collagen (p = 0.002), at 7 days. Within the limits of this in vivo study, Precedent and Ketac Cem glass ionomer cements showed better tissue healing with a greater number of fibroblasts and collagen, as compared to Meron.

In Vitro Effects of Nano-hydroxyapatite Paste on Initial Enamel Carious Lesions.

PURPOSE: The purpose of this study was to analyze the protective effect of remineralizing agents on enamel caries lesions using surface Knoop microhardness testing (KHN) and atomic force microscopy (AFM). METHODS: Forty-eight human enamel blocks were assigned to four groups (N=12): (1) control (without agent); (2) fluoride varnish (Duraphat); (3) nano-HAP paste (Desensibilize Nano P); and (4) casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (MI Paste Plus). Incipient caries-like lesions were artificially developed. Cariogenic challenge (pH-cycling) was performed for seven days. The pastes were applied before each immersion in demineralization solution, and the varnish was applied only once. KHN values were obtained at baseline, after incipient enamel lesion, and after challenge. The percentage of surface hardness recovery (%SMHR) was performed, and the surface morphology was evaluated by atomic force microscopy (AFM). ANOVA, Tukey's, and student paired t tests were applied at P<.05. RESULTS: After the cariogenic challenge, the nano-HAP group showed significantly higher KHN and %SMHR values than varnish. The CPP-ACP group showed no increase in KHN. The nano-HAP group showed, via AFM, a protective layer formation with globular deposits on the surface. CONCLUSION: SMHR and AFM morphology revealed that nano-hydroxyapatite paste showed a protective effect against in vitro enamel caries development.

In vitro effects of nano-hydroxyapatite paste on initial enamel carious lesions.

PURPOSE: The purpose of this study was to analyze the protective effect of remineralizing agents on enamel caries lesions using surface Knoop microhardness testing (KHN) and atomic force microscopy (AFM). METHODS: Forty-eight human enamel blocks were assigned to four groups (N=12): (1) control (without agent); (2) fluoride varnish (Duraphat); (3) nano-HAP paste (Desensibilize Nano P); and (4) casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (MI Paste Plus). Incipient caries-like lesions were artificially developed. Cariogenic challenge (pH-cycling) was performed for seven days. The pastes were applied before each immersion in demineralization solution, and the varnish was applied only once. KHN values were obtained at baseline, after incipient enamel lesion, and after challenge. The percentage of surface hardness recovery (%SMHR) was performed, and the surface morphology was evaluated by atomic force microscopy (AFM). ANOVA, Tukey's, and student paired t tests were applied at P<.05. RESULTS: After the cariogenic challenge, the nano-HAP group showed significantly higher KHN and %SMHR values than varnish. The CPP-ACP group showed no increase in KHN. The nano-HAP group showed, via AFM, a protective layer formation with globular deposits on the surface. CONCLUSION: SMHR and AFM morphology revealed that nano-hydroxyapatite paste showed a protective effect against in vitro enamel caries development.

Fluoride release/uptake from different orthodontic adhesives: a 30-month longitudinal study.

The aim of this study was to test the null hypothesis that there is no difference in fluoride release between resin-modified glass ionomer cements (RMGICs) and composites in the long term. The materials were divided into 5 groups: a nonfluoride-releasing composite - Group TXT (Transbond XT), a fluoride-releasing composite - Group QC (Quick-Cure), and three RMGICs - Groups FOLC, FOB and MC (Fuji Ortho LC, Fuji Ortho Band, and Multi-Cure). Fluoride release was measured at time intervals of 1 h, 1, 7, 14, 21 and 29 days, followed by further evaluations performed at 6, 12, 18, 24 and 30 months using selective ion electrodes connected to an ionic analyzer. Fluoride releasing and re-releasing experiments were analyzed using the Kruskal-Wallis test and Mann-Whitney test with the Bonferroni correction. The amount of fluoride released by FOB was larger in comparison with the other adhesives (p=0.01). In the long-term, FOLC and MC had a similar performance (p>0.05). The composites presented a low fluoride release, but fluoride ion uptake and re-release capacity of QC was statistically significant (p<0.05) during the experiment. In conclusion, the null hypothesis was rejected, the RMGIC Fuji Ortho Band and the composite Quick-Cure presented greater fluoride release and re-release capacity when recharged.

Qual material possui maior longevidade em molares decíduos: resina composta ou cimento de ionômero de vidro? - revisão sistemática da literatura / Which material has the highest longevity in primary molars: composite resin or glass ionomer cement? - a systematic review of the literature

Introdução: Diversos materiais restauradores são indicados para a restauração de dentes decíduos posteriores, como amálgama, resina composta, cimento de ionômero de vidro convencional, cimento de ionômero de vidro modificado por resina e resinas compostas modificadas com poliácidos (compômeros). Entretanto, uma dúvida ainda persiste quanto ao desempenho clínico do cimento de ionômero de vidro, em decorrência de suas propriedades, para ser utilizado como material restaurador definitivo em molares decíduos. Objetivo: Realizar uma revisão sistemática da literatura acerca da taxa de sobrevivência de restaurações realizadas em molares decíduos utilizando resina composta e cimento de ionômero de vidro, buscando com base em evidências científicas, responder a PICO question: "Qual material possui maior longevidade em molares decíduos: resina composta ou cimento de ionômero de vidro?". Material e métodos: Para este fim foram realizadas buscas em duas bases de dados, PubMed e Web of Science, utilizando uma estratégia de busca previamente determinada, para selecionar artigos de acordo com critérios de inclusão e exclusão criados para esse trabalho por dois examinadores calibrados. Resultados: A seleção dos artigos foi realizada de acordo com o fluxograma do PRISMA e foi criada uma tabela para avaliação qualitativa dos artigos selecionados. Foram encontrados 398 artigos na base de dados PubMed e 375 na Web of Science, sendo 153 coincidentes em ambas. Quarenta e seis artigos foram selecionados para leitura completa, dentre eles 42 foram excluídos, e quatro artigos foram incluídos para esta revisão. Conclusão: Os artigos desta revisão demonstraram que a resina composta possuiu maior longevidade em molares decíduos comparada aos cimentos de ionômero de vidro. Porém futuros estudos clínicos necessitam ser conduzidos para comprovar qual o material mais indicado para restaurá-los, já que os cimentos de ionômero modificados por resina mostraram taxas de sobrevivência clínica satisfatórias.

Introduction: Several restorative materials are indicated for restoration of posterior deciduous teeth, such as amalgam, composite resin, conventional glass ionomer cement, resin modified glass ionomer cement and composite resins modified with polyacids (compomers). However, a doubt still persists related to the clinical performance of the glass ionomer cements to be used to restore deciduous molars, due to its properties. Objective: To perform a systematic review of the literature about the survival rate of composite resin and glass ionomer cement restorations performed in deciduous molars aiming scientific evidence to answer the PICO question: "Which material has greater longevity in deciduous molars: resin composite or glass ionomer cement?" Material and methods: The research was performed on two databases, PubMed and Web of Science, using a predetermined search strategy to select articles according to the inclusion and exclusion criteria, evaluated by two calibrated examiners. Results: The selection of the articles was carried out according to the PRISMA flowchart and a table was created for the qualitative evaluation of the included articles. It was found 398 articles in the PubMed database and 375 in the Web of Science, 153 of which were coincident in both. Forty-six articles were selected for complete reading, 42 of which were excluded, and four articles were included in this review. Conclusion: The articles investigated in this review demonstrated that composite resin has a higher longevity in deciduous molars compared to glass ionomer cements. However, future clinical studies are needed to attest which material is better to restore them, since the resin modified glass ionomer cements showed satisfactory clinical survival rates.

Protective effect of calcium nanophosphate and CPP-ACP agents on enamel erosion.

The aim of this study was to assess the effect of different remineralizing agents on enamel microhardness (KHN) and surface topography after an erosive challenge. Forty-eight human enamel specimens (4 × 4 mm) were randomly assigned to 4 groups: control (no treatment), fluoride varnish, calcium nanophosphate paste and casein phosphopeptide-amorphous calcium phosphate paste (CPP-ACP). Both pastes were applied for 5 minutes, and fluoride varnish, for 24 h. Four daily erosive cycles of 5 minutes of immersion in a cola drink and 2 h in artificial saliva were conducted for 5 days. KHN readings were performed at baseline and after 5 days. The percentage of enamel hardness change (%KHN) was obtained after erosion. The surface topography was evaluated by atomic force microscopy (AFM). The data were tested using ANOVA, Tukey's and paired-T tests (p < 0.05). After an erosive challenge, there was no statistically significant difference between the control (96.8 ± 11.4 KHN / 72.4 ± 3.0%KHN) and the varnish (91.7 ± 14.1 KHN / 73.4 ± 5.5%KHN) groups. The nanophosphate group showed lower enamel hardness loss (187.2 ± 27.9 / 49.0 ± 7.9%KHN), compared with the CPP-ACP group (141.8 ± 16.5 / 60.6 ± 4.0%KHN), and both were statistically different from the varnish and the control groups. AFM images showed a rough surface for the control and the varnish groups, a non-homogeneous layer with globular irregularities for CPP-ACP, and a thick homogeneous layer for the nanophosphate group. None of the agents provided protection against the development of erosion; however, nanophosphate paste was able to reduce enamel surface softening after the erosive challenge.

TiF4 varnish protects the retention of brackets to enamel after in vitro mild erosive challenge

Abstract The effect of fluoride agents on the retention of orthodontic brackets to enamel under erosive challenge is little investigated. Objective: The aim of this study was to evaluate the effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) agents on the shear bond strength of brackets to enamel and on the enamel microhardness around brackets under erosive challenge. Methods: Brackets were bonded to bovine incisors. Five groups were formed according to fluoride application (n=10): TiF4 varnish, TiF4 solution, NaF varnish, NaF solution and control (without application). The specimens were submitted to erosive challenge (90 s cola drink/2h artificial saliva, 4x per day for 7 days). Solutions were applied before each erosive cycle and varnishes were applied once. Vickers Microhardness (VHN) was obtained before and after all cycles of erosion and the percentage of microhardness loss was calculated. Shear bond strength, adhesive remnant index and polarized light microscopy were conducted after erosion. The data were analyzed by ANOVA, Tukey, Kruskal-Wallis and Mann-Whitney U tests (α=0.05). Results: The %VHN had no statistically significant differences among the experimental groups. However, considering the comparisons of all groups with the control group, TiF4 varnish showed the highest protection from enamel demineralization (effect size of 2.94, while the effect size for the other groups was >2.4). The TiF4 varnish group had significantly higher shear bond strength compared to other groups. There was no difference among groups for adhesive remnant index. Polarized light microscopy showed higher demineralization depth for the control group. Conclusions: Application of NaF and TiF4 agents during mild erosive challenge minimized the enamel mineral loss around brackets, however only the experimental TiF4 varnish was able to prevent the reduction of shear bond strength of brackets to enamel.

Effects of erosive challenge on the morphology and surface properties of luting cements / Efeito do desafio erosivo na morfologia e propriedades de superfície de agentes cimentantes

Introduction: Few studies investigated the surface properties of luting cements after erosive challenge. Objective: To evaluate the surface roughness (Ra), Vickers hardness (VHN) and morphology of 4 luting cements after erosive challenge. Material and method: Twenty specimens of each cement were prepared (4×2mm) and divided into experimental (erosive challenge) and control (artificial saliva) groups (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) and Zinc phosphate (ZnP). The erosive challenge was performed by four daily erosive cycles (90s) in a cola drink and 2 h in artificial saliva over 7 days. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was analyzed by scanning electron microscopy (SEM). ANOVA, Tukey and Student-T tests were used (α=0.05). Result: After erosion, all luting cements had increase in Ra values and U200 and ZnP groups had the highest %VHN. After saliva immersion, only U200 and ZnP groups had significant increases in Ra values and there were no significant differences among the groups in %VHN. SEM analysis showed that Ketac and ZnP groups had rough and porous surfaces, and U200 group had higher resin matrix degradation than ARC group. Conclusion: Erosive challenge with a cola drink affected the surface properties of all luting cements.

Introdução: Poucos estudos investigaram as propriedades de superfície de cimentos após desafio erosivo. Objetivo: Avaliar a rugosidade da superfície (Ra), dureza Vickers (VHN) e morfologia de superfície de 4 cimentos após desafio erosivo. Material e método: Vinte amostras de cada cimento foram preparadas (4×2mm) e divididas em grupo experimental (desafio erosivo) e controle (saliva artificial) (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) e Fosfato de Zinco (ZnP). O desafio erosivo foi realizado com quatro ciclos erosivos diárias (90s) em bebida à base de cola e 2h em saliva artificial durante 7 dias. As leituras de Ra e VHN foram realizadas antes e após erosão. A porcentagem de perda de dureza (%VHN) foi obtida depois da erosão. A morfologia de superfície foi analisada por microscopia eletrônica de varredura (MEV). Foram utilizados testes de ANOVA, Tukey e T-Student (α=0,05). Resultado: Após a erosão, foi observado aumento dos valores de Ra em todos os cimentos testados, e os grupos U200 e ZNP tiveram a maior %VHN. Após imersão em saliva, apenas os grupos U200 e ZnP tiveram aumento significativo nos valores de Ra e não houve diferenças significativas entre os grupos quanto à %VHN. A análise em MEV mostrou que os grupos Ketac e ZNP apresentaram superfícies rugosas e porosas, e o grupo U200 apresentou maior degradação da matriz comparado ao grupo ARC. Conclusão: O desafio erosivo com bebida a base de cola afetou as propriedades de superfície de todos os cimentos.

Cytotoxicity of latex and non-latex orthodontic elastomeric ligatures on L929 mouse fibroblasts.

This study investigated the cytotoxicity exists between latex and non-latex Orthodontic elastomeric ligatures. Six elastomeric ligatures (1 latex, 2 latex-free and 3 polyurethane) from different manufacturers were divided into 6 groups of 15 elastics each: A (Latex-free, American Orthodontics), M (Polyurethane, Morelli), G (Polyurethane,GAC International), Te (Polyurethane, Tecnident), TP (Natural latex,TP Orthodontics) and U (Latex-free,3M Unitek). The cytotoxicity assay was performed using cell cultures (L929 mouse fibroblast cell line), which were subjected to the cell viability test with neutral red ("dye-uptake") at 1, 2, 3, 7 and 28 days. Data were analyzed statistically by ANOVA and Tukey's test (α=0.05). No statistically significant differences (p>0.05) were observed between Groups M and Te in all experimental periods, except at 2 days. No significant differences (p>0.05) in cell viability were found either among Groups A, G, TP and U or between Groups M and Te at 24 h or among Groups CC, A, G, TP and U at 2 and 28 days. It may be concluded that latex-free elastomeric ligatures from American Orthodontics and Unitek trademarks induced less cell lysis compared to latex and polyurethane ligatures.

Biocompatibility of orthodontic adhesives in rat subcutaneous tissue.

OBJECTIVE: The objective of the present study was to verify the hypothesis that no difference in biocompatibility exists between different orthodontic adhesives. MATERIAL AND METHODS: Thirty male Wistar rats were used in this study and divided into five groups (n=6): Group 1 (control, distilled water), Group 2 (Concise), Group 3 (Xeno III), Group 4 (Transbond XT), and Group 5 (Transbond plus Self-Etching Primer). Two cavities were performed in the subcutaneous dorsum of each animal to place a polyvinyl sponge soaked with 2 drops of the respective adhesive in each surgical loci. Two animals of each group were sacrificed after 7, 15, and 30 days, and their tissues were analyzed by using an optical microscope. RESULTS: At day 7, Groups 3 (Transbond XT) and 4 (Xeno III) showed intense mono- and polymorphonuclear inflammatory infiltrate with no differences between them, whereas Groups 1 (control) and 2 (Concise) showed moderate mononuclear inflammatory infiltrate. At day 15, severe inflammation was observed in Group 3 (Transbond XT) compared to other groups. At day 30, the same group showed a more expressive mononuclear inflammatory infiltrate compared to other groups. CONCLUSION: Among the orthodontic adhesive analyzed, it may be concluded that Transbond XT exhibited the worst biocompatibility. However, one cannot interpret the specificity of the data generated in vivo animal models as a human response.

In vitro effects of erosive challenge on the surface properties of sealants

To assess in vitro the surface roughness (Ra), Vickers hardness (VHN) and surface morphology of resin and glass ionomer materials used for sealants after dynamic erosive challenge. Methods: Twenty specimens of each material were prepared and divided into experimental (erosive challenge) and control groups (n=10): Protect Riva (SDI), Opallis Flow (3M ESPE), Fluroshield (Dentsply), Filtek Z350 XT Flow (3M ESPE). The erosive challenge was performed 4 times per day (90 s) in cola drink and for 2 h in artificial saliva for 7 days. The control specimens were maintained in artificial saliva. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was evaluated by scanning electron microscopy (SEM). The data were analyzed by ANOVA, Tukey and paired t tests (á=0.05). Results: After erosion and saliva immersion, there was an increase in Ra values for all groups and Riva group showed the highest Ra values. After erosive challenge, Riva and Filtek groups showed significant decrease in VHN values, but Filtek group showed the greatest %VHN. For all groups there was inorganic particle protrusion and matrix degradation after erosion visualized by SEM images. Conclusions: Erosive challenge affected the surface properties of all materials used as sealants, particularly in the Riva and Filtek groups...