Performance evaluation of black soldier fly larvae fed on human faeces, food waste and their mixture.

In this study, Black Soldier Fly Larvae (BSFL)-based technology has been proposed and tested for treatment and valorization of human faeces, food waste and a mixture of 75% human faeces with 25% food waste. Experiments were conducted between 15 and 45 °C and 55-75% relative humidity. BSFL's performance for the degradation of the mixed waste was significantly better than their performances when used for the degradation of either human faeces or food waste fed alone, primarily due to the availability of more conducive pH, and better microbial and nutrient balance. The abiotic factors, temperature and relative humidity impacted the decomposition rate and weight gain pattern of BSFL when they were fed on the waste streams. The results showed that the optimum conditions to conduct the proposed BSFL-based treatment was 31-35 °C and 55-75% RH. The protein content in the BSFL was not impacted significantly by the quality of the waste stream, whereas the fat content varied substantially. The abiotic factors also impacted the protein and fat content of BSFL. The investigation led to the estimation of the decomposition rates over a wide range of temperature and relative humidity conditions, which could be useful for the design of large-scale BSFL-based treatment plants.

Black soldier fly larvae for treatment and segregation of commingled municipal solid waste at different environmental conditions.

The commingled nature of the municipal solid waste in many developing nations is one of the primary reasons behind the failure to its successful management. Although there are technologies to effectively treat and process well-segregated and classified waste, they are ineffective in managing the commingled waste. Commingled waste has neither calorific value enough to support waste-to-energy operations nor is it suitable for producing quality compost to generate market value. In this article, a novel Black Soldier Fly Larva (BSFL) -based technology has been proposed and tested to auto-segregate and treat the biodegradable fraction of the Commingled Municipal Solid Waste (CMSW). Several BSFL feeding experiments on five different CMSW compositions were conducted at various temperatures and relative humidity conditions. BSFL could selectively consume the biodegradable fraction of the CMSW to convert it into its body mass and separate itself from the rest of the waste, which mainly consisted of inert and recyclable waste fractions that can be further treated using appropriate waste treatment technology. The mature larvae or the pre-pupae grown at the expense of the biodegradable waste fraction can find several commercial uses. The larvae's consumption rate and weight gain were dependent on the environmental conditions; 30 °C and relative humidity of 65-75% provided the highest consumption rate and most significant weight gain. The batch experiments in the laboratory proved that BSFL could be promising for the treatment of CMSW. The experimental data presented may help design a process for further scaling up an effective treatment method for CMSW, which might benefit many developing nations in managing their waste effectively and economically.

Negative axicon tip-based fiber optic interferometer cavity sensor for volatile gas sensing.

In this research work we demonstrated negative axicon optical fiber tip filled with Polydimethylsiloxane (PDMS) as a sensor platform for volatile organic gases detection at room temperature. The response of the sensor was measured with various Volatile Organic Compounds (VOCs) such as Chloroform, Hexane, Isopropanol, Acetone, Toluene and Methanol in the concentration ranging from 5 to 200 ppm. The corresponding sensitivity and limit of detection (LOD) of the developed sensor for the measured VOCs were observed between the order of around 23.7 to 3.2 pm/ppm and 0.84 to 6.10 ppm, respectively. The response and recovery time of sensor were found between the order of 30 to 57 seconds and 8 to 25 seconds respectively for the measured VOCs. Thermal stability of the developed sensor was also studied at 30-70 °C with intervals of 10°C. The principle of sensing is based on change in the length of the Fabry-Perot Interferometric (FPI) cavity in the presence of varied concentrations of VOCs, which results in changes in the shift in wavelength of an interference pattern attributed to the change in PDMS filling the cavity length (swelling). The experimentally observed trends in the relative swelling of PDMS with VOCs are found in agreement with the theoretically calculated values obtained from the Hansen solubility parameter (HSP). The developed gas sensor has the potential to fulfill the demands of industrial applications.

Combined effect of ZnO nanoripples and solvent additive on the nanomorphology and performance of PTB7-Th: PC71BM organic solar cells.

In bulk heterojunction organic solar cells (OSCs), nanomorphology of the photoactive layer plays a crucial role in determining photocurrent and fill factor (FF) of OSCs, and therefore it is essential to control the nanomorphology of the photoactive layer to fabricate devices with high power conversion efficiency (PCE). We demonstrate the combined effects of a ZnO nanorippled electron transport layer (ETL) and solvent additive (1,8-diiodooctane (DIO)) on the nanomorphology and performance of a model OSC in an inverted geometry. The photoactive layer in the model OSC is composed of Poly [4,8-bis (5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl] (PTB7-Th):phenyl-C71-butyric acid methyl ester (PC71BM) blend. It is observed that the use of ZnO nanoripples as an ETL and DIO as a solvent additive facilitates the formation of near ideal nanomorphology of bi-continuous interpenetrating network of donor and acceptor. This is confirmed by morphological studies using atomic force microscopy, scanning electron microscopy and transmission electron microscopy. Photo-electrochemical impedance spectroscopy measurements confirm that obtained nanomorphology of bicontinuous interpenetrating network is contributing to the improved device performance. The device with 3 vol% DIO, with underneath ZnO nanoripples exhibited improved current density (J sc), FF, open circuit voltage (V oc) and PCE of 15.57 mA cm-2, 64.50%, 0.81V and 8.20%, respectively.

Spatial distribution of major bacterial species and different volatile fatty acids in a two-phase anaerobic biofilm reactor with PVA gel beads as bio-carrier.

Conventional completely mixed anaerobic treatment systems limit the chances of the different species of bacteria to spatially group together according to their mutual cooperation and as a result, show a lower efficiency and vulnerability towards shock situations. It is interesting to know about the stratification of the different bacterial species participating in the degradation process and the intermediates that they produce. In this study, we established and optimized a two-phase anaerobic packed bed biofilm reactor system (AnPBR) with porous PVA gel beads used as bio-carriers and ran the reactor system in a steady state to observe the VFAs produced along with the microbial diversity of the predominant species at different stages of the reactor system. We observed that acetate and butyrate were the predominant intermediate VFAs while concentrations of other VFAs such that propionic acid were low. Acetobacterium and Clostridium were found to be the most abundant bacterial species in acidogenic reactor while methanogenic reactor was highly enriched with Methanobacterium and Methanosarcina. Apart from the above, syntrophic populations such as Syntrophobactor wolinii were also observed to be dominant in both the reactors - especially towards the end of acidogenic reactor and the initial part of the methanogenic reactor.

Uncertainties in Coastal Ocean Color Products: Impacts of Spatial Sampling.

With increasing demands for ocean color (OC) products with improved accuracy and well characterized, per-retrieval uncertainty budgets, it is vital to decompose overall estimated errors into their primary components. Amongst various contributing elements (e.g., instrument calibration, atmospheric correction, inversion algorithms) in the uncertainty of an OC observation, less attention has been paid to uncertainties associated with spatial sampling. In this paper, we simulate MODIS and VIIRS OC products from 30m resolution OC products derived from the Operational Land Imager (OLI) aboard Landsat-8, to examine impacts of spatial sampling on both cross-sensor product intercomparisons and in-situ validations of Rrs products in coastal waters. The simulations were carried out for OLI scenes "scanned" for one full orbital-repeat cycle of each ocean color satellite. While some view-angle dependent differences in simulated Aqua-MODIS and VIIRS were observed, the average uncertainties (absolute) in product intercomparisons (due to differences in spatial sampling) at regional scales are found to be 1.8%, 1.9%, 2.4%, 4.3%, 2.7%, 1.8%, and 4% for the Rrs(443), Rrs(482), Rrs(561), Rrs(655), [Chla], Kd(482), and bbp(655) products, respectively. It is also found that, depending on in-water spatial variability and the sensor's footprint size, the errors for an in-situ validation location in coastal areas can reach as high as ±18%. We conclude that a) expected biases induced by the spatial sampling in product intercomparisons are mitigated when products are averaged over at least 7km×7km windows, b) VIIRS observations, with improved consistency in cross-track spatial sampling yields more precise calibration/validation results than MODIS, and c) use of a single pixel centered on in-situ coastal sites provides an optimal sampling size for validation efforts. These findings will have implications for enhancing our understanding of uncertainties in ocean color retrievals and for planning of future calibration/validation exercises.

Alleviation of toxic hexavalent chromium using indigenous aerobic bacteria isolated from contaminated tannery industry sites.

In the last decade, much attention has been paid to bioremediation of Cr(VI) using various bacterial species. Cr(VI) remediation by indegeneous bacteria isolated from contaminated sites of a tannery industry located in Tamil Nadu, India, was investigated in this study. Three Cr(VI) resistant bacterial strains (TES-1, TEf-1, and TES-2) were isolated and selected based on their Cr(VI) reduction ability in minimal salt medium. Among these three bacterial strains, TES-1 was found to be most efficient in bioreduction, while TES-2 was only found to be Cr(VI) resistant and showed negligible bioreduction, whereas TEf-1 was observed to be most Cr(VI) tolerant. Potential for bioremediation of TES-1 and TEf-1 was further investigated at different concentrations of Cr(VI) in the range of 50 to 350 mg L(-1). TEf-1 showed prominent synchronous growth throughout the experiment, whereas TES-1 took a longer acclimatization time. Minimum inhibitory concentrations (MIC) of Cr(VI) for TES-1 and TEf-1 were approximated as 600 mg L(-1) and 750 mg L(-1), respectively. The kinetic behavior of Cr(VI) reduction by TES-1 and TEf-1 exhibited zero- and first-order removal kinetics for Cr(VI), respectively. The most efficient strain TES-1 was identified as Streptomyces sp. by gene sequencing of 16S rRNA.

MRI characterization of temporal lobe epilepsy using rapidly measurable spatial indices with hemisphere asymmetries and gender features.

INTRODUCTION: The paucity of morphometric markers for hemispheric asymmetries and gender variations in hippocampi and amygdalae in temporal lobe epilepsy (TLE) calls for better characterization of TLE by finding more useful prognostic MRI parameter(s). METHODS: T1-weighted MRI (3 T) morphometry using multiple parameters of hippocampus-parahippocampus (angular and linear measures, volumetry) and amygdalae (volumetry) including their hemispheric asymmetry indices (AI) were evaluated in both genders. The cutoff values of parameters were statistically estimated from measurements of healthy subjects to characterize TLE (57 patients, 55% male) alterations. RESULTS: TLE had differential categories with hippocampal atrophy, parahippocampal angle (PHA) acuteness, and several other parametric changes. Bilateral TLE categories were much more prevalent compared to unilateral TLE categories. Female patients were considerably more disposed to bilateral TLE categories than male patients. Male patients displayed diverse categories of unilateral abnormalities. Few patients (both genders) had combined bilateral appearances of hippocampal atrophy, amygdala atrophy, PHA acuteness, and increase in hippocampal angle (HA) where medial distance ratio (MDR) varied among genders. TLE had gender-specific and hemispheric dominant alterations in AI of parameters. Maximum magnitude of parametric changes in TLE includes (a) AI increase in HA of both genders, (b) HA increase (bilateral) in female patients, and (c) increase in ratio of amygdale/hippocampal volume (unilateral, right hemispheric), and AI decrease in MDR, in male patients. CONCLUSION: Multiparametric MRI studies of hippocampus and amygdalae, including their hemispheric asymmetry, underscore better characterization of TLE. Rapidly measurable single-slice parameters (HA, PHA, MDR) can readily delineate TLE in a time-constrained clinical setting, which contrasts with customary three-dimensional hippocampal volumetry that requires many slice computation.

Inkjet-printed sub-zero temperature sensor for real-time monitoring of cold environments.

Real-time monitoring of low temperatures (usually below 0 °C) or cold environments is a specific requirement that finds its high demand in the aerospace, pharmaceutical, food, and beverage industries to maintain the temperature at high altitudes or in refrigerators and cold storage. In general, this purpose is achieved by using a sub-zero temperature sensor coupled with a control system. However, the market available such temperature sensors are very expensive, and bulky, thus not being suitable for portable operation, and also they suffer from poor accuracy. Therefore, the development of high-performance, low-cost, lightweight, and portable sub-zero temperature sensors is highly desired. In our recent work, we developed such sensors and integrated them with auxiliary electronics to demonstrate their wireless operation for the continuous and real-time monitoring of cold environments. So, in order to obtain low-cost sensors a cost-effective inkjet printing technology was employed for the fabrication of devices. A lightweight polydimethylsiloxane (PDMS) was used as the substrate and an electrically conducting graphene nanocomposite was used as the temperature-sensing material. To obtain a functional graphene nanocomposite film with a thickness of 530 nm and a conductivity of ~189 S m-1, the printed graphene nanocomposite was photonically sintered using a xenon flash lamp. This step was crucial for obtaining a sensor on the soft PDMS platform. The graphene nanocomposite film exhibited a positive temperature coefficient resistance value of approximately 0.119 %/°C, and its resistance values varied almost linearly (with an Adjusted R2 value (model accuracy) of 0.99) with temperature within the operating range of -30 °C to 80 °C. The sensor was properly encapsulated for protection without significantly affecting its performance. The sensors demonstrated sufficient flexibility, with a bending radius of 20 mm, and sustained 500 continuous bending cycles. Finally, the real-time operation of the sensors was demonstrated by wirelessly transmitting and monitoring the temperature over a smartphone platform.

Transitioning from MODIS to VIIRS Global Water Reservoir Product.

Reservoirs play a crucial role in regulating water availability and enhancing water security. Here, we develop NASA's Visible Infrared Imaging Radiometer Suite (VIIRS) based Global Water Reservoir (GWR) product, consisting of measurements of reservoir area, elevation, storage, evaporation rate, and evaporation loss for 164 large global reservoirs. The dataset is available at 8-day and monthly temporal resolutions. Since the Moderate Resolution Imaging Spectroradiometer (MODIS) is close to the end of its life, we further evaluated the consistency between MODIS and VIIRS-based GWR to ensure continuity to the 20+ year MODIS GWR product. Independent assessment of VIIRS reservoir storage (8-day) retrievals against in-situ measurements shows an average of R2 = 0.84, RMSE = 0.47 km3, and NRMSE = 16.45%. The evaporation rate has an average of R2 = 0.56, RMSE = 1.32 mm/day, and NRMSE = 28.14%. Furthermore, results show good consistency (R2 ≥ 0.90) between the VIIRS and MODIS-based product components, confirming that long-term data continuity can be achieved. This dataset can provide valuable insights for long-term trend analysis, hydrological modeling, and understanding hydroclimatic extremes in the context of reservoirs.

Self-transfecting GMO-PMO chimera targeting Nanog enable gene silencing in vitro and suppresses tumor growth in 4T1 allografts in mouse.

Phosphorodiamidate morpholino oligonucleotide (PMO)-based antisense reagents cannot enter cells without the help of a delivery technique, which limits their clinical applications. To overcome this problem, self-transfecting guanidinium-linked morpholino (GMO)-PMO or PMO-GMO chimeras have been explored as antisense agents. GMO facilitates cellular internalization and participates in Watson-Crick base pairing. Targeting NANOG in MCF7 cells resulted in decline of the whole epithelial to mesenchymal transition (EMT) and stemness pathway, evident through its phenotypic manifestations, all of which were promulgated in combination with Taxol due to downregulation of MDR1 and ABCG2. GMO-PMO-mediated knockdown of no tail gene resulted in desired phenotypes in zebrafish even upon delivery after 16-cell stages. In BALB/c mice, 4T1 allografts were found to regress via intra-tumoral administration of NANOG GMO-PMO antisense oligonucleotides (ASOs), which was associated with occurrence of necrotic regions. GMO-PMO-mediated tumor regression restored histopathological damage in liver, kidney, and spleen caused by 4T1 mammary carcinoma. Serum parameters of systemic toxicity indicated that GMO-PMO chimeras are safe. To the best of our knowledge, self-transfecting antisense reagent is the first report since the discovery of guanidinium-linked DNA (DNG), which could be useful as a combination cancer therapy and, in principle, can render inhibition of any target gene without using any delivery vehicle.

Hydroalcoholic root extracts of Houttuynia cordata (Thunb.) standardized by UPLC-Q-TOF-MS/MS promotes apoptosis in human hepatocarcinoma cell HepG2 via GSK-3ß/ß-catenin/PDL-1 axis.

Houttuynia cordata (Thunb.), an important medicinal plant of Northeast India, Korea, and China, is used to treat various ailments and for anticancer research. Knowing its traditional practices, we are interested in the mode-of-action of HCT on HepG2 to co-relate the traditional practice with modern drug therapeutics. UPLC-Q-ToF-Ms analysis of HCT reveals identification of 14 metabolites. Network pharmacology analysis of the 14 compounds showed interaction with 232 different targets with their potential involvement in hepatocellular carcinoma. Whole extracts impart cytotoxicity on variety of cell lines including HepG2. There was a significant morphological alteration in treated HepG2 cells due to impairment of cytoskeletal components like ß and γ- tubulin. Arrest at G1-S checkpoint was clearly indicated downregulation of Cyclin D1. The root extracts actuated apoptosis in HepG2 as evident from altered mitochondrial membrane potential, Annexin V- FITC, BrdU-PI, AO/EtBr assays, and modulations of apoptotic protein expression but without ROS generation. Whole extracts caused abrogation of epithelial to mesenchymal transition with repression of Snail, N-Cadherin, Vimentin, MMP-9, and upregulation of Pan-Cadherin. Pathway analysis found GSK-3ß in Wnt/ß-Catenin signaling cascade to be involved through Hepatocellular carcinoma (hsa05225) pathway. The GSK-3ß/ß-Catenin/PDL-1 signaling was found to be inhibited with the downregulation of pathway components. This was further confirmed by application of EGF, an inducer of the GSK-3ß/ß-Catenin pathway that neutralized the effect of Houttuynia cordata (Thunb.) root extract on the said pathway. Network pharmacology analysis also confirms the synergy network with botanical-bioactive-target-disease which showed Kaempferol to have the highest degree of association with the said pathway.

Physical process first law and increase of horizon entropy for black holes in Einstein-Gauss-Bonnet gravity.

We establish the physical process version of the first law by studying small perturbations of a stationary black hole with a regular bifurcation surface in Einstein-Gauss-Bonnet gravity. Our result shows that when the stationary black hole is perturbed by a matter stress energy tensor and finally settles down to a new stationary state, the Wald entropy increases as long as the matter satisfies the null energy condition.

A novel hybrid ferrous sulfide impregnated anion exchanger for trace removal of hexavalent chromium from contaminated water.

To effectively remove trace concentration of potential cancer-causing Cr(VI) from impaired drinking water, a novel hybrid material was synthesized through an in-situ synthesis process by dispersing ferrous sulfide nanoparticles within an anion exchanger. Characterization studies revealed that the hybrid material, named hybrid ferrous sulfide impregnated anion exchanger (HISIIX), contained uniformly distributed ferrous sulfide nanoparticles of size 10-40 nm within the anion exchanger host. Apart from FeS2 nanoparticles, it also included nanoparticles of FeO and FeOOH. The incorporation of ferrous sulfide nanoparticles within the anion exchanger contributed to the significant differences in the Cr(VI) uptake capacity of HISIIX. Validation studies using fixed-bed column proved that HISIIX had significantly high Cr(VI) uptake capacity and was able to run for 4200 bed volumes (BVs) before a breakthrough of 50 µg L-1 when subjected to a synthetic aqueous solution containing 200 µg L-1 Cr(VI). Cr(VI) uptake capacity of the parent anion exchanger and HISIIX were determined to be 1.39 mg g-1 and 3.44 mg g-1, respectively, when the columns were allowed to run until exhaustion. Ferrous sulfide nanoparticles acted as a reducing agent transforming Cr(VI) anions into Cr(III) precipitates. It also produced sites for further removal of Cr(VI) anions through ligand sorption upon oxidation. The anion exchanger substrate attracted anions selectively via the Donnan membrane principle, resulting in a synergy of three different processes - ion exchange, redox reaction, and ligand sorption that gave the HISIIX a high capacity for the selective Cr(VI) removal from contaminated water.

Frequency and patterns of exposure to live poultry and the potential risk of avian influenza transmission to humans in urban Bangladesh.

Avian influenza is endemic in Bangladesh, where greater than 90% of poultry are marketed through live poultry markets (LPMs). We conducted a population-based cross-sectional mobile telephone survey in urban Dhaka, Bangladesh to investigate the frequency and patterns of human exposure to live poultry in LPMs and at home. Among 1047 urban residents surveyed, 74.2% (95% CI 70.9-77.2) reported exposure to live poultry in the past year, with the majority of exposure occurring on a weekly basis. While visiting LPMs was less common amongst females (40.3%, 95% CI 35.0-45.8) than males (58.9%, 95% CI 54.0-63.5), females reported greater poultry exposure through food preparation, including defeathering (13.2%, 95% CI 9.5-17.9) and eviscerating (14.8%, 95% CI 11.2-19.4) (p < 0.001). A large proportion of the urban population is frequently exposed to live poultry in a setting where avian influenza viruses are endemic in LPMs. There is thus not only ample opportunity for spillover of avian influenza infections into humans in Dhaka, Bangladesh, but also greater potential for viral reassortment which could generate novel strains with pandemic potential.

Population Health Surveillance Using Mobile Phone Surveys in Low- and Middle-Income Countries: Methodology and Sample Representativeness of a Cross-sectional Survey of Live Poultry Exposure in Bangladesh.

BACKGROUND: Population-based health surveys are typically conducted using face-to-face household interviews in low- and middle-income countries (LMICs). However, telephone-based surveys are cheaper, faster, and can provide greater access to hard-to-reach or remote populations. The rapid growth in mobile phone ownership in LMICs provides a unique opportunity to implement novel data collection methods for population health surveys. OBJECTIVE: This study aims to describe the development and population representativeness of a mobile phone survey measuring live poultry exposure in urban Bangladesh. METHODS: A population-based, cross-sectional, mobile phone survey was conducted between September and November 2019 in North and South Dhaka City Corporations (DCC), Bangladesh, to measure live poultry exposure using a stratified probability sampling design. Data were collected using a computer-assisted telephone interview platform. The call operational data were summarized, and the participant data were weighted by age, sex, and education to the 2011 census. The demographic distribution of the weighted sample was compared with external sources to assess population representativeness. RESULTS: A total of 5486 unique mobile phone numbers were dialed, with 1047 respondents completing the survey. The survey had an overall response rate of 52.2% (1047/2006) and a co-operation rate of 89.0% (1047/1176). Initial results comparing the sociodemographic profile of the survey sample to the census population showed that mobile phone sampling slightly underrepresented older individuals and overrepresented those with higher secondary education. After weighting, the demographic profile of the sample population matched well with the latest DCC census population profile. CONCLUSIONS: Probability-based mobile phone survey sampling and data collection methods produced a population-representative sample with minimal adjustment in DCC, Bangladesh. Mobile phone-based surveys can offer an efficient, economic, and robust way to conduct surveillance for population health outcomes, which has important implications for improving population health surveillance in LMICs.

Avian influenza transmission risk along live poultry trading networks in Bangladesh.

Live animal markets are known hotspots of zoonotic disease emergence. To mitigate those risks, we need to understand how networks shaped by trading practices influence disease spread. Yet, those practices are rarely recorded in high-risk settings. Through a large cross-sectional study, we assessed the potential impact of live poultry trading networks' structures on avian influenza transmission dynamics in Bangladesh. Networks promoted mixing between chickens sourced from different farming systems and geographical locations, fostering co-circulation of viral strains of diverse origins in markets. Viral transmission models suggested that the observed rise in viral prevalence from farms to markets was unlikely explained by intra-market transmission alone, but substantially influenced by transmission occurring in upstream network nodes. Disease control interventions should therefore alter the entire network structures. However, as networks differed between chicken types and city supplied, standardised interventions are unlikely to be effective, and should be tailored to local structural characteristics.

Assessment of low ABSPI among arsenic exposed and non-exposed populations: a pilot study.

This cross-sectional study was carried out to assess and compare Ankle Brachial Systolic Pressure Index (ABSPI) amongst 120 arsenic exposed and 120 non-exposed populations of Samta village in Bangladesh. Abnormal ABSPI was more prevalent in arsenic exposed (13.3%) than in non-exposed (2.5%) group. The prevalence of abnormal ABSPI for respondents when adjusted for age, sex, BMI, blood pressure status and diabetic status, the prevalence remain significantly different. The findings suggest that those exposed to arsenic have increased chance of having abnormal ABSP and hence increased chance of peripheral arterial disease in Bangladesh.