RESUMEN
Beryllium-7 (7Be) was created by proton irradiation of natural (natB) and enriched (10B) boron targets. The targets were dissolved in nitric acid, and the 7Be was separated from the bulk boron target material by cation-exchange chromatography. An average recovery of (99.4 ± 3.7)% was obtained for 6 separations. The purified 7Be sample was placed into a batch-mode ion source to create a 7Be beam that was delivered at an average rate of 5 × 105 pps to end users at the National Superconducting Cyclotron Laboratory.
RESUMEN
At the Facility for Rare Isotope Beams (FRIB), an oven-ion source combination was used to create rare isotope beams in support of the stand-alone user beam program of the ReAccelerator (ReA) facility. This ion source, called Batch-Mode Ion Source (BMIS), was loaded with enriched stable nuclides (30Si, 50Cr, and 58Fe) and long-lived radionuclides (26Al, 32Si). The introduced samples, herein designated as source samples, were thermally volatilized in the BMIS oven, and then ionization was used to generate the required beams. Owing to the different chemical behavior of the used samples, it was important to tailor the sample loading process for each desired beam species. An important parameter here is the volatility of the introduced species, which influences the adequate release of the isotope of interest. Additionally, any co-present, volatile components will affect the ion yields of the desired isotope, while isobaric contaminants will decrease the beam purity. To manufacture isotope source samples that meet these characteristics, various chemical methodologies were developed. All prepared samples were successfully used in BMIS to deliver beams for various user beam experiments. The here-established sample preparation techniques will greatly aid future efforts in developing offline rare-isotope beams.
RESUMEN
Tungsten is a commonly used material at many heavy-ion beam facilities, and it often becomes activated due to interactions with a beam. Many of the activation products are useful in basic and applied sciences if they can be recovered efficiently. In order to develop the radiochemistry for harvesting group (IV) elements from irradiated tungsten, a heavy-ion beam containing 88Zr was embedded into a stack of tungsten foils at the National Superconducting Cyclotron Laboratory and a separation methodology was devised to recover the 88Zr. The foils were dissolved in 30% hydrogen peroxide, and the 88Zr was chemically purified from the tungsten matrix and from other co-implanted radionuclides (such as 85Sr and 88Y) using strong cation-exchange (AG MP-50) chromatographic resin in sulfuric acid media. The procedure provided 88Zr in approximately 60 mL 0.5 M sulfuric acid with no detectable radio-impurities. The overall recovery yield for 88Zr was (92.3 ± 1.2)%. This proof-of-concept experiment has facilitated the development of methodologies to harvest from tungsten and tungsten-alloy parts that are regularly irradiated at heavy-ion beam facilities.
RESUMEN
During routine operation of the Facility for Rare Isotope Beams (FRIB), radionuclides will accumulate in both the aqueous beam dump and along the beamline in the process of beam purification. These byproduct radionuclides, many of which are far from stability, can be collected and purified for use in other scientific applications in a process called isotope harvesting. In this work, the viability of 88Zr harvesting from solid components was investigated at the National Superconducting Cyclotron Laboratory. A secondary 88Zr beam was stopped in a series of collectors comprised of Al, Cu, W, and Au foils. This work details irradiation of the collector foils and the subsequent radiochemical processing to isolate the deposited 88Zr (and its daughter 88Y) from them. Total average recovery from the Al, Cu, and Au collector foils was (91.3 ± 8.9) % for 88Zr and (95.0 ± 5.8) % for 88Y, respectively, which is over three times higher recovery than in a previous aqueous-phase harvesting experiment. The utility of solid-phase isotope harvesting to access elements such as Zr that readily hydrolyze in near-neutral pH aqueous conditions has been demonstrated for application to harvesting from solid components at FRIB.