Biofilm formation on dental implants with a hybrid surface microtopography: An in vitro study in a validated multispecies dynamic biofilm model.

OBJECTIVES: The objective of this study is to qualitatively and quantitatively evaluate biofilm formation on hybrid titanium implants (HS), with moderately rough and turned surface topographies. MATERIALS AND METHODS: A validated dynamic in vitro multispecies biofilm model, based on bacterial growth under flow and shear conditions resembling the oral cavity, was used to evaluate biofilm formation on the tested implant surfaces. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to compare the biofilm structure and microbial biomass deposited on either the moderately rough or the turned surface of HS. Quantitative polymerase chain reaction (qPCR) was used to evaluate the total bacterial counts and counts of each specific bacterium in biofilms formed on implants with either the moderately rough or the turned surfaces, as in the hybrid titanium implants, after 24, 48 and 72 h. A general linear model was applied to compare the CLSM and qPCR results between the tested implant surfaces. RESULTS: A significantly higher bacterial biomass grew on the moderately rough implant surfaces, compared to the turned surface area of HS implants (p < .05), at all incubation times, as evidenced with both CLSM and SEM. qPCR analysis also demonstrated an important increase in the total and specific bacterial counts in moderately rough surface implants at the three incubation times. CONCLUSIONS: Implant surface topography (moderately rough versus turned) significantly influenced in vitro biofilm formation in terms of biofilm structure, bacterial biomass and quantity of the specific species selected for the model used.

Radiosurgery for classical trigeminal neuralgia: impact of the shot size on clinical outcome.

BACKGROUND: This study compares the outcome of patients suffering from medically refractory classical trigeminal neuralgia (TN) after treatment with radiosurgery using two different shot sizes (5- and 6-mm). METHODS: All patients included in this open, prospective, non-controlled study were treated in a single institution for TN (95 cases in 93 patients) with LINear ACcelerators (LINAC) single-dose radiosurgery using a 5-mm shot (43 cases) or 6-mm shot (52 cases). The target was positioned on the intracisternal part of the trigeminal nerve. RESULTS: The mean Dmax (D0.035) to the brainstem was higher in the 6-mm group: 12.6 vs 21.3 Gy (p < 0.001). Pain relief was significantly better in the 6-mm group: at 12 and 24 months in the 6-mm group the rate of pain-free patients was 90.2 and 87.8%, respectively vs. 73.6 and 73.6% in the 5-mm group (p = 0.045). At 12 and 24 months post-radiosurgical hypoesthesia was more frequent in the 6-mm group: 47.0 and 58% vs.11.3 and 30.8% in the 5-mm group (p = 0.002). To investigate the effect of cone diameter and the dose to the brainstem on outcomes, patients were stratified into three groups: group 1 = 5-mm shot, (all Dmax < 25 Gy, 43 cases), group 2 = 6-mm shot, Dmax < 25 Gy (32 cases), group 3 = 6-mm shot Dmax > 25 Gy (20 cases). At 12 months the rates of hypoesthesia were 11.3, 33.5 and 76.0%, respectively in groups 1, 2 and 3 (p < 0.001) and the rates of recurrence of pain were 26.4, 16.5 and 5%, respectively, (p = 0.11). CONCLUSION: LINAC treatment with a 6-mm shot provided excellent control of pain, but increased the rate of trigeminal nerve dysfunction, especially when the maximum dose to the brainstem was higher than 25 Gy.

One-year outcomes of dental implants with a hybrid surface macro-design placed in patients with history of periodontitis: A randomized clinical trial.

AIM: To evaluate the radiological, clinical, and microbiological outcomes of implants with a hybrid surface macro-design in patients with a history of periodontitis. MATERIAL AND METHODS: The study was designed as a 12-month, parallel-arm, randomized controlled trial where patients with a history of treated periodontitis in need of dental implants for single-unit or short-span prosthesis were randomly allocated to a test [implants with a machined titanium surface in the coronal collar (hybrid; HS)] or a control group [conventional implants with moderately rough surface up to the implant shoulder (RS)]. Patients were followed at 3, 6, and 12 months after loading with assessment of radiological, clinical, and microbiological outcomes, as well as patient-related outcome measures (PROMs). RESULTS: Forty patients were randomly assigned to either the RS group (n = 20) or the HS (n = 20) group. At 1 year, the mean marginal bone level changes were 0.22 [standard deviation (SD) 0.36] mm for the HS group and 0.22 (SD 0.29) mm for the RS group, with no significant differences between them (p = .961). Similarly, no significant differences in clinical, microbiological, or PROMs were observed between groups. CONCLUSIONS: HS implants demonstrated radiographic, clinical, and microbiological characteristics equal to RS implants in patients with a history of periodontitis. CLINICAL TRIAL REGISTRATION: ClinicalTrials.gov (identifier NCT05010382).

COVID-19 pneumonia: relationship between inflammation assessed by whole-body FDG PET/CT and short-term clinical outcome.

PURPOSE: [18F]-2-Fluoro-2-deoxy-D-glucose PET/CT (FDG PET/CT) is a sensitive and quantitative technic for detecting inflammatory process. Glucose uptake is correlated with an increased anaerobic glycolysis seen in activated inflammatory cells such as monocytes, lymphocytes, and granulocytes. The aim of the study was to assess the inflammatory status at the presumed peak of the inflammatory phase in non-critically ill patients requiring admission for COVID-19. METHODS: Patients admitted with COVID-19 were prospectively enrolled. FDG PET/CT was performed from day 6 to day 14 of the onset of symptoms. Depending on FDG PET/CT findings, patients' profiles were classified as "inflammatory" or "low inflammatory." FDG PET/CT data were compared with chest CT evolution and short-term clinical outcome. All inflammatory sites were reported to screen potential extra-pulmonary tropism. RESULTS: Thirteen patients were included. Maximum standardized uptake values ranged from 4.7 to 16.3 in lungs. All patients demonstrated increased mediastinal lymph nodes glucose uptake. Three patients (23%) presented mild nasopharyngeal, two patients (15%) bone marrow, and five patients (38%) splenic mild increase in glucose uptake. No patient had significant digestive focal or segmental glucose uptake. There was no significant physiological myocardial glucose uptake in all patients except one. There was no correlation between PET lung inflammatory status and chest CT evolution or short-term clinical outcome. CONCLUSION: Inflammatory process at the presumed peak of the inflammatory phase in COVID-19 patients is obvious in FDG PET/CT scans. Glucose uptake is heterogeneous and typically focused on lungs. TRIAL REGISTRATION: NCT04441489. Registered 22 June 2020 (retrospectively registered).

Added Value of a Single Fast 20-second Deep-Inspiration Breath-hold Acquisition in FDG PET/CT in the Assessment of Lung Nodules.

Purpose To compare the accuracy of a single 20-second deep-inspiration breath hold (DIBH) in fluorodeoxyglucose (FDG) positron emission tomography (PET)/computed tomography (CT) to that with conventional free-breathing (FB) whole-body PET/CT for the assessment, characterization, and quantification of lung lesions in terms of the blurring effect of respiratory motion. Materials and Methods Institutional review board approval was obtained, and the requirement to obtain informed consent was waived. A preclinical study was performed in a test population of 19 patients to evaluate the feasibility and consistency of DIBH techniques compared with phase-based respiratory gating (PBRG). One hundred fifteen patients with lung lesions were then prospectively included and assessed with FB PET/CT followed by 20-second DIBH PET/CT. Maximum standardized uptake value (SUVmax), peak standardized uptake value (SUVpeak), and number and size of nodules were reported for each acquisition and then compared with findings from histopathologic examination and/or clinical-radiologic follow-up. Statistical analysis was performed with the t test, χ2 test, Pearson correlation coefficient, and receiver operating characteristic analysis. Results In the test population, data obtained with DIBH PET and PBRG PET showed close correlation (r = 0.94, P < .001 for SUVmax and r = 0.98, P < .001 for SUVpeak). In the clinical population, both SUVmax and SUVpeak were significantly increased with DIBH compared with FB (5.60 ± 4.20 vs 3.11 ± 1.80 and 2.25 ± 1.75 vs 1.71 ± 0.96, respectively; P < .001). A significantly greater number of lung lesions was detected with DIBH PET/CT compared with FB PET/CT (P < .001), with the detection of 70 additional nodules and more accurate coregistration of 84. According to the area under the receiver operating characteristic curve for SUVpeak, DIBH demonstrated a higher level of accuracy than did FB (P = .039). Conclusion The DIBH PET/CT technique is feasible in routine clinical practice and is more sensitive for quantitative measurements and lesion localization. This technique reduces the blurring effect of respiratory motion, thus improving the diagnostic accuracy for lung nodules. © RSNA, 2017.

Detectors assessment for stereotactic radiosurgery with cones.

The purpose of this work is to assess eight detectors performance for output factor (OF), percent depth dose (PDD), and beam profiles in a 6-MV Clinac stereotactic radiosurgery mode for cone irradiation using Monte Carlo simulation as reference. Cones with diameters comprised between 30 and 4 mm have been studied. The evaluated detectors were ionization chambers: pinpoint and pinpoint 3D, diodes: SRS, P and E, Edge, MicroDiamond and EBT3 radiochromic films. The results showed that pinpoints underestimate OF up to -2.3% for cone diameters ≥10 mm and down to -12% for smaller cones. Both nonshielded (SRS and E) and shielded diodes (P and Edge) overestimate the OF respectively up to 3.3% and 5.2% for cone diameters ≥10 mm and in both cases more than 7% for smaller cones. MicroDiamond slightly overestimates the OF, 3.7% for all the cones and EBT3 film is the closest to Monte Carlo with maximum difference of ±1% whatever the cone size is. For the profiles and the PDD, particularly for the small cones, the size of the detector predominates. All diodes and EBT3 agree with the simulation within ±0.2 mm for beam profiles determination. For PDD curve all the active detectors response agree with simulation up to 1% for all the cones. EBT3 is the more accurate detector for beam profiles and OF determinations of stereotactic cones but it is restrictive to use. Due to respectively inappropriate size of the sensitive volume and composition, pinpoints and diodes do not seem appropriate without OF corrective factors below 10 mm diameter cone. MicroDiamond appears to be the best detector for OF determination regardless all cones. For off-axis measurements, the size of the detector predominates and for PDD all detectors give promising results.

Quantitative analysis of 99mTc-pertechnetate thyroid uptake with a large-field CZT gamma camera: feasibility and comparison between SPECT/CT and planar acquisitions.

PURPOSE: The main objective of this study was to evaluate the ability of a large field Cadmium Zinc Telluride (CZT) camera to estimate thyroid uptake (TU) on single photon emission computed tomography (SPECT) images with and without attenuation correction (Tomo-AC and Tomo-NoAC) compared with Planar acquisition in a series of 23 consecutive patients. The secondary objective was to determine radiation doses for the tracer administration and for the additional Computed Tomography (CT) scan. METHODS: Cross-calibration factors were determined using a thyroid phantom, for Planar, Tomo-AC and Tomo-NoAC images. Then Planar and SPECT/CT acquisitions centered on the thyroid were performed on 5 anthropomorphic phantoms with activity ranging from 0.4 to 10 MBq, and 23 patients after administration of 79.2 ± 3.7 MBq of [99mTc]-pertechnetate. We estimated the absolute thyroid activity (AThA) for the anthropomorphic phantoms and the TU for the patients. Radiation dose was also determined using International Commission on Radiological Protection (ICRP) reports and VirtualDoseTMCT software. RESULTS: Cross-calibration factors were 66.2 ± 4.9, 60.7 ± 0.7 and 26.5 ± 0.3 counts/(MBq s), respectively, for Planar, Tomo-AC and Tomo-NoAC images. Theoretical and estimated AThA for Planar, Tomo-AC and Tomo-NoAC images were statistically highly correlated (r < 0.99; P < 10-4) and the average of the relative percentage difference between theoretical and estimated AThA were (8.6 ± 17.8), (- 1.3 ± 5.2) and (12.8 ± 5.7) %, respectively. Comparisons between TU based on different pairs of images (Planar vs Tomo-AC, Planar vs Tomo-NoAC and Tomo-AC vs Tomo-NoAC) showed statistically significant correlation (r = 0.972, 0.961 and 0.935, respectively; P < 10-3). Effective and thyroid absorbed doses were, respectively (0.34CT + 0.95NM) mSv, and (3.88CT + 1.74NM) mGy. CONCLUSION: AThA estimation using Planar and SPECT/CT acquisitions on a new generation of CZT large-field cameras is feasible. In addition, TU on SPECT/CT was as accurate as conventional planar acquisition, but the CT induced additional thyroid exposure. Trial registration Name of the registry: Thyroid Uptake Quantification on a New Generation of Gamma Camera (QUANTHYC). TRIAL NUMBER: NCT05049551. Registered September 20, 2021-Retrospectively registered, https://clinicaltrials.gov/ct2/show/record/NCT05049551?cntry=MC&draw=2&rank=4 .

Integrin-αvß3 is a Therapeutically Targetable Fundamental Factor in Medulloblastoma Tumorigenicity and Radioresistance.

Medulloblastoma is one of the most prevalent solid tumors found in children, occurring in the brain's posterior fossa. The standard treatment protocol involves maximal resection surgery followed by craniospinal irradiation and chemotherapy. Despite a long-term survival rate of 70%, wide disparities among patients have been observed. The identification of pertinent targets for both initial and recurrent medulloblastoma cases is imperative. Both primary and recurrent medulloblastoma are marked by their aggressive infiltration into surrounding brain tissue, robust angiogenesis, and resistance to radiotherapy. While the significant role of integrin-αvß3 in driving these characteristics has been extensively documented in glioblastoma, its impact in the context of medulloblastoma remains largely unexplored. Integrin-αvß3 was found to be expressed in a subset of patients with medulloblastoma. We investigated the role of integrin-αvß3 using medulloblastoma-derived cell lines with ß3-subunit depletion or overexpression both in vitro and in vivo settings. By generating radioresistant medulloblastoma cell lines, we uncovered an increased integrin-αvß3 expression, which correlated with increased susceptibility to pharmacologic integrin-αvß3 inhibition with cilengitide, a competitive ligand mimetic. Finally, we conducted single-photon emission computed tomography (SPECT)/MRI studies on orthotopic models using a radiolabeled integrin-αvß3 ligand (99mTc-RAFT-RGD). This innovative approach presents the potential for a novel predictive imaging technique in the realm of medulloblastoma. Altogether, our findings lay the foundation for employing SPECT/MRI to identify a specific subset of patients with medulloblastoma eligible for integrin-αvß3-directed therapies. This breakthrough offers a pathway toward more targeted and effective interventions in the treatment of medulloblastoma. SIGNIFICANCE: This study demonstrates integrin-αvß3's fundamental role in medulloblastoma tumorigenicity and radioresistance and the effect of its expression on cilengitide functional activity.

A prospective evaluation of zirconia posterior fixed dental prostheses: three-year clinical results.

STATEMENT OF PROBLEM: Although the favorable mechanical properties of zirconium oxide-based ceramics have increased the acceptance of fixed dental prostheses for use in the posterior regions of the mouth in recent years, there are few clinical studies documenting the longevity of these restorations. Furthermore, certain complications must be resolved before the material is used more extensively. PURPOSE: The purpose of this randomized prospective study was to evaluate the clinical performance of zirconia (Lava) 3-unit posterior fixed dental prostheses. MATERIAL AND METHODS: Twenty 3-unit fixed dental prostheses were placed in 17 participants to replace a second premolar or a first molar. Eleven were placed in the maxilla and 9 in the mandible. All abutment teeth were prepared with a chamfer finish line of 0.8 to 1 mm, and frameworks were prepared with the Lava system. Restorations were cemented with a resin cement. Two calibrated examiners independently evaluated the fixed dental prostheses 1 week (baseline) and 1, 2, and 3 years after placement with the California Dental Association quality evaluation system. The periodontal parameters: the gingival index, plaque index, margin index, and the probing depths of abutment teeth and contralateral teeth were assessed. Data were analyzed by using descriptive statistics and the Wilcoxon signed-rank test (α=.05). RESULTS: All fixed dental prostheses were rated satisfactory after 3 years, and no fracture of the framework was observed during the observation period. One fixed dental prostheses was lost because of a biological complication at the 3-year examination, and a small degree of chipping of the veneering ceramic was observed in 2 participants. No significant differences among the periodontal parameters of the test and control teeth were observed except for the margin index. CONCLUSIONS: The results of a 3-year evaluation suggest that posterior zirconia 3-unit fixed dental prostheses are a reliable treatment.

Analyzing the far-right political action on Twitter: the Chilean constituent process.

The concept of "politics of the end" assumes the catastrophe of living in a world that produces new forms of accumulation and allows symbolic and semiotic capital to create value. Currently, various far-right movements worldwide seem to appropriate this concept, employing radical communication strategies as a repertoire to contest the public agenda. These strategies include the massive creation of bots on social networks to spread hate speech and coordinate ideological manifestations. This article seeks to verify the use of these strategies by the Chilean far-right on Twitter. For the above, a social network analysis approach is proposed during the current socio-political crisis in Chile, which began with the massive protests of October 2019 and led to an unprecedented constituent process. For nine months, we studied five opinion leaders on Twitter from the Chilean far-right, who together have more than 600 thousand followers and almost 130 thousand followings. Through descriptive, quantitative, and qualitative techniques, an explicit political action "from the resistance" is revealed in the activity of the network, which includes hundreds of new users and coordinated bots to disseminate identifiable discourses with strongly ideological ideas. This coordination also presents identifiable differences in how opinion leaders interact and communicate with their network environment.

Microvascular injuries, secondary edema, and inconsistencies in lung vascularization between affected and nonaffected pulmonary segments of non-critically ill hospitalized COVID-19 patients presenting with clinical deterioration.

PURPOSE: We aimed to better understand the pathophysiology of SARS-CoV-2 pneumonia in non-critically ill hospitalized patients secondarily presenting with clinical deterioration and increase in oxygen requirement without any identified worsening factors. METHODS: We consecutively enrolled patients without clinical or biological evidence for superinfection, without left ventricular dysfunction and for whom a pulmonary embolism was discarded by computed tomography (CT) pulmonary angiography. We investigated lung ventilation and perfusion (LVP) by LVP scintigraphy, and, 24 h later, left and right ventricular function by Tc-99m-labeled albumin-gated blood-pool scintigraphy with late (60 mn) tomographic albumin images on the lungs to evaluate lung albumin retention that could indicate microvascular injuries with secondary edema. RESULTS: We included 20 patients with confirmed SARS-CoV-2 pneumonia. All had CT evidence of organizing pneumonia and normal left ventricular ejection fraction. No patient demonstrated preserved ventilation with perfusion defect (mismatch), which may discard a distal lung thrombosis. Patterns of ventilation and perfusion were heterogeneous in seven patients (35%) with healthy lung segments presenting a relative paradoxical hypoperfusion and hypoventilation compared with segments with organizing pneumonia presenting a relative enhancement in perfusion and preserved ventilation. Lung albumin retention in area of organizing pneumonia was observed in 12 patients (60%), indicating microvascular injuries, increase in vessel permeability, and secondary edema. CONCLUSION: In hospitalized non-critically ill patients without evidence of superinfection, pulmonary embolism, or cardiac dysfunction, various types of damage may contribute to clinical deterioration including microvascular injuries and secondary edema, inconsistencies in lung segments vascularization suggesting a dysregulation of the balance in perfusion between segments affected by COVID-19 and others. SUMMARY STATEMENT: Microvascular injuries and dysregulation of the balance in perfusion between segments affected by COVID-19 and others are present in non-critically ill patients without other known aggravating factors. KEY RESULTS: In non-critically ill patients without evidence of superinfection, pulmonary embolism, macroscopic distal thrombosis or cardiac dysfunction, various types of damage may contribute to clinical deterioration including 1/ microvascular injuries and secondary edema, 2/ inconsistencies in lung segments vascularization with hypervascularization of consolidated segments contrasting with hypoperfusion of not affected segments, suggesting a dysregulation of the balance in perfusion between segments affected by COVID-19 and others.

An Intravenous 100-mL Lipid Emulsion Infusion Dramatically Improves Myocardial Glucose Metabolism Extinction in Cardiac FDG PET Clinical Practice.

PURPOSE: Physiological myocardial accumulation of FDG impairs the diagnosis of inflammatory/infectious or tumoral myocardial detection by FDG PET/CT. We prospectively evaluated the addition, 3 hours before imaging, of an intravenous 100-mL lipid emulsion infusion (Intralipid) to a high-fat, low-carbohydrate diet (HFLCD) for at least 2 meals followed by a fast of at least 6 to 12 hours in patients referred for the diagnosis of myocardial inflammation, endocarditis, cardiac or paracardiac masses, intracardiac device, or prosthetic valve infections. METHODS: Data of 58 patients consecutively included (28 Intralipid patients, 30 controls with HFLCD alone) were compared. FDG uptake in normal myocardium was scored from 0 (complete myocardial suppression) to 3 (high diffuse uptake). Myocardial maximal, peak, and mean SUV and the rate of interpretable images according to the clinical indication were measured. RESULTS: Compared with controls, Intralipid infusion significantly improved the rate of score 0 (89% vs 63%, P = 0.021), of interpretable images according to the clinical indication (100% vs 72%, P = 0.0047) and decreased all myocardial SUV values (eg, SUVmax median, 1.9 [interquartile range, 1.7-2.5] vs 3.1 [interquartile range, 2.3-4.1]; P < 0.001). CONCLUSIONS: A lipid emulsion infusion in addition to HFLCD better suppresses cardiac glucose metabolism than HFLCD alone.

In vivo monitoring of the therapeutic efficacy of a CXCR1/2 inhibitor with 18F-FDG PET/CT imaging in experimental head and neck carcinoma: A feasibility study.

The chemokine receptors CXCR1/2 play a key role in the aggressiveness of several types of cancers including head and neck squamous cell carcinomas (HNSCCs). In HNSCCs, CXCR1/2 signaling promotes cell proliferation and angiogenesis leading to tumor growth and metastasis. The competitive inhibitor of CXCR1/2, C29, inhibits the growth of experimental HNSCCs in mice. However, a non-invasive tool to monitor treatment response is essential to implement the use of C29 in clinical practices. 18F-FDG PET/CT is a gold-standard tool for the staging and the post-therapy follow-up of HNSCCs patients. Our study aimed to perform the first in vivo monitoring of C29 efficacy by non-invasive 18F-FDG PET/CT imaging. Mice bearing experimental HNSCCs (CAL33) were injected with 18F-FDG (T0) and thereafter treated (n = 7 mice, 9 tumors, 50 mg/kg by gavage) or not (n = 7 mice, 10 tumors) with C29 for 4 consecutive days. Final 18F-FDG-tumor uptake was determined at day 4 (TF). The average relative change (TF-T0) in 18F-FDG tumor uptake was +25.85 ± 10.93 % in the control group vs -5.72 ± 10.07 % in the C29-treated group (p < 0.01). These results were consistent with the decrease of the tumor burden and with the decrease of tumor proliferating Ki67+ cells. These results paved the way for the use of 18F-FDG to monitor tumor response following C29 treatment.

A comparison of the marginal vertical discrepancies of zirconium and metal ceramic posterior fixed dental prostheses before and after cementation.

STATEMENT OF PROBLEM: Marginal discrepancies of zirconia posterior fixed dental prostheses (FDPs) fabricated using various systems have been assessed to determine the quality of the restorations and facilitate clinical use; however, studies are limited and results are ambiguous because of the sample sizes and measurement methods. PURPOSE: The purpose of this in vitro study was to compare changes in marginal fit of posterior fixed dental prostheses of 3 zirconia systems manufactured using CAD/CAM technology and metal ceramic posterior fixed dental protheses fabricated with the conventional lost-wax technique, before and after cementation. MATERIAL AND METHODS: Forty standardized master steel dies with 2 abutments simulating first mandibular premolars were fabricated to receive a posterior 3-unit FDP (from first molar to first premolar) and divided into 4 groups (n=10): Lava All-Ceramic System, Procera Bridge Zirconia, VITA In-Ceram 2000 YZ, and metal ceramic (control group). All FDPs were prepared for an internal space of 50 microm. The external marginal gap of the restorations was investigated by measuring 30 points in the middle of the buccal and lingual surfaces; therefore, 60 measurements per abutment were recorded. Measurements were made with an image analysis program on the master steel model before and after conventional cementation with a glass ionomer agent (Ketac Cem Easymix). The data obtained were statistically analyzed using 1-way ANOVA, Duncan's multiple range post hoc test, and Student's paired t test (alpha=.05). RESULTS: No significant differences in the vertical marginal fit before and after cementation were recorded for the analyzed groups. The marginal discrepancy of Procera abutments before and after cementation (9 +/-10 microm and 12 +/-9 microm, respectively) was less than that of the other groups. Significant differences (P=.001) were observed in marginal adaptation between Procera Bridge Zirconia and the other groups. CONCLUSIONS: The results of this study showed that cementation did not cause a significant increase in the vertical marginal discrepancies of the FDPs and that an internal space of 50 mum provided a high precision of fit of the restorations. The accuracy of fit achieved for the 3 zirconium oxide groups analyzed was within the range of clinical acceptance, and the discrepancies were lower than in the metal ceramic group. Procera Bridge Zirconia showed the lowest vertical discrepancies.

Evaluation of MLACF based calculated attenuation brain PET imaging for FDG patient studies.

Calculating attenuation correction for brain PET imaging rather than using CT presents opportunities for low radiation dose applications such as pediatric imaging and serial scans to monitor disease progression. Our goal is to evaluate the iterative time-of-flight based maximum-likelihood activity and attenuation correction factors estimation (MLACF) method for clinical FDG brain PET imaging. FDG PET/CT brain studies were performed in 57 patients using the Biograph mCT (Siemens) four-ring scanner. The time-of-flight PET sinograms were acquired using the standard clinical protocol consisting of a CT scan followed by 10 min of single-bed PET acquisition. Images were reconstructed using CT-based attenuation correction (CTAC) and used as a gold standard for comparison. Two methods were compared with respect to CTAC: a calculated brain attenuation correction (CBAC) and MLACF based PET reconstruction. Plane-by-plane scaling was performed for MLACF images in order to fix the variable axial scaling observed. The noise structure of the MLACF images was different compared to those obtained using CTAC and the reconstruction required a higher number of iterations to obtain comparable image quality. To analyze the pooled data, each dataset was registered to a standard template and standard regions of interest were extracted. An SUVr analysis of the brain regions of interest showed that CBAC and MLACF were each well correlated with CTAC SUVrs. A plane-by-plane error analysis indicated that there were local differences for both CBAC and MLACF images with respect to CTAC. Mean relative error in the standard regions of interest was less than 5% for both methods and the mean absolute relative errors for both methods were similar (3.4% ± 3.1% for CBAC and 3.5% ± 3.1% for MLACF). However, the MLACF method recovered activity adjoining the frontal sinus regions more accurately than CBAC method. The use of plane-by-plane scaling of MLACF images was found to be a crucial step in order to obtain improved activity estimates. Presence of local errors in both MLACF and CBAC based reconstructions would require the use of a normal database for clinical assessment. However, further work is required in order to assess the clinical advantage of MLACF over CBAC based method.

Marginal Vertical Discrepancies of Monolithic and Veneered Zirconia and Metal-Ceramic Three-Unit Posterior Fixed Dental Prostheses.

PURPOSE: The aim of this study was to investigate and compare the marginal fit of posterior fixed dental prostheses (FDPs) made of monolithic and veneered computer-aided design/computer-assisted manufacture (CAD/CAM) zirconia ceramic with metal-ceramic posterior FDPs. MATERIALS AND METHODS: Thirty standardized steel dies were prepared to receive posterior three-unit FDPs. Specimens were randomly divided into three groups (n = 10): (1) metal-ceramic (control group), (2) veneered zirconia, and (3) monolithic zirconia. All FDPs were cemented using a glass-ionomer cement. The specimens were subjected to thermal cycling (5°C to 55°C). A scanning electron microscope (SEM) with a magnification of ×500 was used for measurements. The data were statistically analyzed using one-way analysis of variance and paired t test. RESULTS: Both zirconia groups showed similar vertical marginal discrepancies, and no significant differences (P = .661) in marginal adaptation were observed among the groups. No differences were observed in either group in marginal discrepancies between surfaces or abutments. CONCLUSION: Monolithic zirconia posterior FDPs exhibit similar vertical marginal discrepancies to veneered zirconia posterior FDPs. No influence of localization measurements was observed.

Impact of a new respiratory amplitude-based gating technique in evaluation of upper abdominal PET lesions.

UNLABELLED: PET acquisition requires several minutes which can lead to respiratory motion blurring, to increase partial volume effect and SUV under-estimation. To avoid these artifacts, conventional 10-min phase-based respiratory gating (PBRG) can be performed but is time-consuming and difficult with a non-compliant patient. We evaluated an automatic amplitude-based gating method (AABG) which keeps 35% of the counts at the end of expiration to minimize respiratory motion. We estimated the impact of AABG on upper abdominal lesion detectability, quantification and patient management. METHODS: We consecutively included 31 patients (82 hepatic and 25 perihepatic known lesions). Each patient underwent 3 acquisitions on a Siemens Biograph mCT (4 rings and time-of-flight): a standard free-breathing whole-body (SWB, 5-7 steps/2.5 min per step, 3.3±0.4 MBq/kg of 18F-FDG), a 10-min PBRG with six bins and a 5-min AABG method. All gated acquisitions were performed with an ANZAI respiratory gating system. SUVmax and target to background ratio (TBR, defined as the maximum SUV of the lesion divided by the mean SUV of a region of interest drawn in healthy liver) were compared. RESULTS: All 94 lesions in SWB images were detected in the gated images. 10-min PBRG and 5-min AABG acquisitions respectively revealed 9 and 13 new lesions and relocated 7 and 8 lesions. Four lesions revealed by 5-min AABG were missed by 10-min PBRG in 3 non-compliant patients. Both gated methods failed to relocate 2 lesions seen on SWB acquisition. Compared to SWB, TBR increased significantly with 10-min PBRG and with 5-min AABG (respectively 41±59%, p=4.10-3 and 66±75%, p=6.10-5) whereas SUVmax did not (respectively 14±43%, p=0.29 with 10-min PBRG, and 24±46%, p=0.11 with 5-min AABG). CONCLUSION: The AABG is a fast and a user-friendly respiratory gating method to increase detectability and quantification of upper abdominal lesions compared to the conventional PBRG procedure and the SWB acquisition.

Integrating respiratory-gated PET-based target volume delineation in liver SBRT planning, a pilot study.

BACKGROUND: To assess the feasibility and benefit of integrating four-dimensional (4D) Positron Emission Tomography (PET) - computed tomography (CT) for liver stereotactic body radiation therapy (SBRT) planning. METHODS: 8 patients with 14 metastases were accrued in the study. They all underwent a non-gated PET and a 4D PET centered on the liver. The same CT scan was used for attenuation correction, registration, and considered the planning CT for SBRT planning. Six PET phases were reconstructed for each 4D PET. By applying an individualized threshold to the 4D PET, a Biological Internal Target Volume (BITV) was generated for each lesion. A gated Planning Target Volume (PTVg) was created by adding 3 mm to account for set-up margins. This volume was compared to a manual Planning Target Volume (PTV) delineated with the help of a semi-automatic Biological Target Volume (BTV) obtained from the non-gated exam. A 5 mm radial and a 10 mm craniocaudal margins were applied to account for tumor motion and set-up margins to create the PTV. RESULTS: One undiagnosed liver metastasis was discovered thanks to the 4D PET. The semi-automatic BTV were significantly smaller than the BITV (p = 0.0031). However, after applying adapted margins, 4D PET allowed a statistically significant decrease in the PTVg as compared to the PTV (p = 0.0052). CONCLUSIONS: In comparison to non-gated PET, 4D PET may better define the respiratory movements of liver targets and improve SBRT planning for liver metastases. Furthermore, non respiratory-gated PET exams can both misdiagnose liver metastases and underestimate the real internal target volumes.

A four-year prospective clinical evaluation of zirconia and metal-ceramic posterior fixed dental prostheses.

PURPOSE: The aim of this study was to compare the survival rates and biologic and technical complications of three-unit metal-ceramic posterior fixed dental prostheses (FDPs) with those obtained with zirconia frameworks. MATERIALS AND METHODS: Thirty-seven patients in need of 40 three-unit posterior FDPs were included in this study. The FDPs were randomly assigned to 20 zirconia and 20 metal-ceramic restorations. Abutment preparation guidelines consisted of a 1-mm-wide circumferential chamfer, axial reduction of 1 mm, and occlusal reduction of 1.5 to 2 mm. At baseline and 1, 2, 3, and 4 years after cementation, success of both types of restorations was evaluated. The restorations were assessed using the California Dental Association's assessment system. Periodontal parameters were assessed by determining the Plaque Index (PI), Gingival Index (GI), Marginal Index (MI), and pocket depth of the abutment and control teeth. Statistical analysis was performed by applying Wilcoxon rank sum and Wilcoxon signed-rank tests. RESULTS: Patients were examined after a mean observation period of 50 ± 2.4 months. The survival rates for metal-ceramic and zirconia restorations were 100% and 95%, respectively. One biologic complication in a zirconia FDP was observed at the 3-year follow-up. No fractures of the zirconia or metal frameworks were observed. Restorations from both groups were assessed as satisfactory. Minor chipping of the veneering ceramic was observed in 2 zirconia FDPs after 4 years. No significant differences were observed between abutment and contralateral teeth for either type of restoration or within the groups with regard to PI, GI, and pocket depth. CONCLUSION: Zirconia-based FDPs demonstrated a similar survival rate to metal-ceramic FDPs after medium-term clinical use.

Comparative analysis of two measurement methods for marginal fit in metal-ceramic and zirconia posterior FPDs.

The purpose of this study was to compare two measurement methods for the external marginal fit of zirconia posterior fixed partial dentures (FPDs) fabricated using computer-aided design/manufacturing technology and metal-ceramic posterior FPDs fabricated using the conventional lost-wax technique. The null hypothesis was that there would be no differences between the measurement methods. Forty standardized steel specimens were prepared to receive posterior three-unit FPDs. Specimens were divided into four groups (n = 10): (1) metal-ceramic, (2) Procera Bridge Zirconia, (3) Lava AllCeramic System, and (4) Vita In-Ceram YZ 2000. All FPDs were luted with glass-ionomer cement (Ketac Cem EasyMix, 3M ESPE). Two measurement methods were used to analyze marginal fit: an image analysis (IA) program and a scanning electron microscope (SEM) (JEOL JSM-6400) with magnifications of 340 and 31,000, respectively. Marginal fit was measured at the same point on each abutment. Significant interaction was observed between measurement method and material (P = .0019). Therefore, the measurement method is not independent of the restoration material. Differences among groups were observed for IA (P = .0001) and SEM (P = .0013). Significant differences were observed for the Procera (P = .0050) and metal-ceramic (P = .0039) specimen groups when both measurement methods were evaluated separately. Accuracy of fit achieved by the four groups analyzed was within the range of clinical acceptance, yielding Procera Bridge Zirconia to have the best marginal fit using both measurement methods.