Long-term effects of maxillary skeletal expander treatment on functional breathing.

Objective: : To investigate the long-term effects of maxillary skeletal expander (MSE) treatment on functional breathing. Objective: measures of breathing, the peak nasal inspiratory flow (PNIF), and peak oral inspiratory flow (POIF), and subjective measures of breathing, the visual analog scale (VAS) and nasal obstruction symptom evaluation (NOSE) survey, were used to investigate the long-term effects of MSE in functional breathing. Seventeen patients, mean age 19.4 ± 3.9 years treated at the UCLA Orthodontics Clinic were assessed on their functional breathing at 3 timepoints: pre-expansion (T0), post-expansion (T1), and post-orthodontic treatment (T2). Results: : Immediately after expansion (T1), all the objective functional breathing values were significantly increased in comparison to T0 (P < 0.05). The VAS total, VAS right and VAS left were significantly lower at T1 in comparison to T0 (P < 0.05). At 26.8 ± 3.9 months after MSE expansion (T2), PNIF total, PNIF right, PNIF left, and POIF were significantly higher when compared to T0 (P < 0.05). Also, VAS total, VAS right and VAS left were significantly lower at T2 when compared to T0 (P < 0.05). Additionally, there was a positive correlation between PNIF and the magnitude of expansion at anterior nasal spine and zygomaticomaxillary point (ZMA). There was a positive correlation between total VAS and the magnitude of expansion at the ZMA. There were no significant changes for the NOSE subjective breathing measurement at all time comparisons. Conclusions: : Overall, MSE treatment produces an increased objective and subjective airway improvement that continues to remain stable in the long-term post expansion.

Breathing changes following mini-implant-supported maxillary skeletal expander treatment in late adolescent or adult patients : Assessment of objective and subjective functional breathing changes.

PURPOSE: The aim of this study was to assess objective and subjective breathing changes in adult patients who underwent maxillary skeletal expansion with the mini-implant-supported maxillary skeletal expander (MSE). METHODS: Twenty-nine patients (mean age 18.1 ± 4.3 years) who underwent expansion using the MSE were compared pre- and posttreatment and with a control group (mean age 19.9 ± 2.6 years) to assess objective and subjective functional breathing changes. Objective measurements of the airway including peak nasal inspiratory flow (PNIF) and peak oral inspiratory flow (POIF) were measured utilizing the In-Check medical device (Clement Clarke, Harlow, United Kingdom). Patients reported subjective breathing assessment utilizing the visual analog scale (VAS). Intragroup comparisons were performed with Wilcoxon tests and intergroup comparison with Mann-Whitney U tests. Spearman correlation coefficients were calculated among the studied variables (P < 0.05). RESULTS: Following MSE treatment, there were significantly higher values for PNIF total (P < 0.0001), PNIF right (P < 0.0001), PNIF left (P < 0.0001), and POIF (P < 0.01) compared to pretreatment and control group results. Also, patients reported a significant decrease in troubled breathing as measured by the VAS for breathing through the right nostril (P < 0.01), left nostril (P < 0.001), and both nostrils (P < 0.01). Comparing the objective and subjective variables for both the pre-MSE or post-MSE groups, the results indicated no significant correlation between total PNIF and total VAS. However, the values had significant correlations between PNIF and VAS on each side when the patients were asked to block one nostril. CONCLUSIONS: Objective functional breathing measurements were increased immediately after treatment with MSE. Subjective functional breathing measurements changes were significantly higher after MSE treatment and compared with the control group. MSE presents a nonsurgical alternative to achieving orthopedic expansion in adult patients which may provide a benefit for patients with nasal airway obstruction.

Total maxillary arch distalization by using headgear in an adult patient.

Although headgear is rarely used in adult patients, its use in adults is mainly for anchorage control. In the current case report, a 24-year-old patient had a skeletal Class I relationship with a Class II tendency, brachyfacial pattern, significant facial asymmetry, and dental 3/4 cusp Class II molar and canine relationships on both sides. The patient declined surgery, and facial asymmetry was not his concern. The final treatment goal was to achieve a stable Class I dental relationship and normal occlusion without significantly compromising the patient's profile. The patient was compliant with the use of cervical-pull headgear after he refused the options of orthodontic-orthognathic combined treatment, maxillary premolar extraction, or temporary skeletal anchorage mini-implants. A 5-mm maxillary arch distal movement was accomplished without significant distal tipping of the molar crowns. The active treatment duration was 31 months. Proper overbite and overjet, balanced occlusion, and an acceptable facial profile were achieved. The treatment results inspire reconsideration of the possibility of using headgear in dental Class II correction in adult patients.

Differential assessment of skeletal, alveolar, and dental components induced by microimplant-supported midfacial skeletal expander (MSE), utilizing novel angular measurements from the fulcrum.

BACKGROUND: In order to assess skeletal expansion, alveolar bone bending, and dental tipping after maxillary expansion, linear and angular measurements have been performed utilizing different craniofacial references. Since the expansion with midfacial skeletal expander (MSE) is archial in nature, the aim of this paper is to quantify the differential components of MSE expansion by calculating the fulcrum locations and applying a novel angular measurement system. METHODS: Thirty-nine subjects with a mean age of 18.2 ± 4.2 years were treated with MSE. Pre- and post-expansion CBCT records were superimposed and compared. The rotational fulcrum of the zygomaticomaxillary complex was identified by localizing the interfrontal distance and modified interfrontal distance. Based on the fulcrum, a novel angular measurement method is presented and compared with a conventional linear method to assess changes of the zygomaticomaxillary complex, dentoalveolar bone, and maxillary first molars. RESULTS: From 39 patients, 20 subjects have the rotational fulcrum of the zygomaticomaxillary complex at the most distant points of the interfrontal distance (101.6 ± 4.7 mm) and 19 subjects at the most distant points of the modified interfrontal distance (98.9 ± 5.7 mm). Linear measurements accounted for 60.16% and 56.83% of skeletal expansion, 16.15% and 16.55% of alveolar bone bending, and 23.69% and 26.62% of dental tipping for right and left side. Angular measurements showed 96.58% and 95.44% of skeletal expansion, 0.34% and 0.33% alveolar bone bending, and 3.08% and 4.23% of dental tipping for the right and left sides. The frontozygomatic, frontoalveolar, and frontodental angles were not significant different (P > 0.05). CONCLUSIONS: In the coronal plane, the center of rotation for the zygomaticomaxillary complex was located at the most external and inferior point of the zygomatic process of the frontal bone or slightly above and parallel to the interfrontal distance. Due to the rotational displacement of the zygomaticomaxillary complex, angular measurements should be a preferred method for assessing the expansion effects, instead of the traditional linear measurement method.

An assessment of the magnitude, parallelism, and asymmetry of micro-implant-assisted rapid maxillary expansion in non-growing patients.

BACKGROUND AND OBJECTIVES: Micro-implant-assisted expanders have shown significant effects on the mid-face, including a degree of asymmetry. The aim of this study is to quantify the magnitude, parallelism, and asymmetry of this type of expansion in non-growing patients. METHODS: A retrospective study on a sample of 31 non-growing patients with an average age of 20.4 years old, with cone beam computed tomography images taken before and right after expansion using maxillary skeletal expander (MSE) were assessed for skeletal expansion at three landmarks bilaterally. RESULTS: Average magnitude of total expansion was 4.98 mm at the anterior nasal spine (ANS) and 4.77 mm at the posterior nasal spine (PNS) which showed statistical significance using a paired t test with p < 0.01. Average expansion at the PNS was 95% of that at the ANS. The sample was divided into symmetric (n = 15) and asymmetric (n = 16) based on the difference in expansion at the ANS, with 16 out of 31 patients exhibiting statistically significant asymmetry. CONCLUSIONS: MSE achieves distinctly parallel expansion in the sagittal plane but can exhibit asymmetrical expansion in the transverse plane.

Zygomaticomaxillary modifications in the horizontal plane induced by micro-implant-supported skeletal expander, analyzed with CBCT images.

BACKGROUND: Miniscrew-assisted rapid palatal expansion (MARPE) has been adopted in recent years to expand the maxilla in late adolescence and adult patients. Maxillary Skeletal Expander (MSE) is a device that exploits the principles of skeletal anchorage to transmit the expansion force directly to the maxillary bony structures and is characterized by the miniscrews' engagement of the palatal and nasal cortical bone layers. In the literature, it has been reported that the zygomatic buttress is a major constraint that hampers the lateral movement of maxilla, since maxilla is located medially to the zygomatic arches. The objective of the present study is to analyze the changes in the zygomatic bone, maxillary bone, and zygomatic arches and to localize the center of rotation for the zygomaticomaxillary complex in the horizontal plane after treatment with MSE, using high-resolution cone-beam computed tomography (CBCT) images. METHODS: Fifteen subjects with a mean age of 17.2 (± 4.2) years were treated with MSE. CBCT records were taken before and after miniscrew-assisted maxillary expansion; three linear and four angular parameters were identified in the axial zygomatic section (AZS) and were compared from pre-treatment to post-treatment using the Wilcoxon signed rank test. RESULTS: Anterior inter-maxillary distance increased by 2.8 mm, posterior inter-zygomatic distance by 2.4 mm, angle of the zygomatic process of the temporal bone by 1.7° and 2.1° (right and left side) (P < 0.01). Changes in posterior inter-temporal distance and zygomaticotemporal angle were negligible (P > 0.05). CONCLUSIONS: In the horizontal plane, the maxillary and zygomatic bones and the whole zygomatic arch were significantly displaced in a lateral direction after treatment with MSE. The center of rotation for the zygomaticomaxillary complex was located near the proximal portion of the zygomatic process of the temporal bone, more posteriorly and more laterally than what has been reported in the literature for tooth-borne expanders. Bone bending takes place in the zygomatic process of the temporal bone during miniscrew-supported maxillary expansion.