RESUMEN
The BRASSINAZOLE-RESISTANT (BZR) transcription factor is a core component of brassinosteroid (BR) signaling and is involved in the development of many plant species. BR is essential for the initiation and elongation of cotton fibers. However, the mechanism of BR-regulating fiber development and the function of BZR is poorly understood in Gossypium hirsutum L. (cotton). Here, we identified a BZR family transcription factor protein referred to as GhBZR3 in cotton. Overexpression of GhBZR3 in Arabidopsis caused shorter root hair length, hypocotyl length, and hypocotyl cell length, indicating that GhBZR3 negatively regulates cell elongation. Pathway enrichment analysis from VIGS-GhBZR3 cotton plants found that fatty acid metabolism and degradation might be the regulatory pathway that is primarily controlled by GhBZR3. Silencing GhBZR3 expression in cotton resulted in taller plant height as well as longer fibers. The very-long-chain fatty acid (VLCFA) content was also significantly increased in silenced GhBZR3 plants compared with the wild type. The GhKCS13 promoter, a key gene for VLCFA biosynthesis, contains two GhBZR3 binding sites. The results of yeast one-hybrid, electrophoretic mobility shift, and luciferase assays revealed that GhBZR3 directly interacted with the GhKCS13 promoter to suppress gene expression. Taken together, these results indicate that GhBZR3 negatively regulates cotton fiber development by reducing VLCFA biosynthesis. This study not only deepens our understanding of GhBZR3 function in cotton fiber development, but also highlights the potential of improving cotton fiber length and plant growth using GhBZR3 and its related genes in future cotton breeding programs.
Asunto(s)
Arabidopsis , Fibra de Algodón , Arabidopsis/genética , Brasinoesteroides/metabolismo , Brasinoesteroides/farmacología , Ácidos Grasos/metabolismo , Regulación de la Expresión Génica de las Plantas , Gossypium/metabolismo , Fitomejoramiento , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Factores de Transcripción/metabolismoRESUMEN
This article presents the design method of a compact MEMS switched-line true-time delay line (TTDL) network over a wide frequency range extending from 2 to 42 GHz using TTDL units. The TTDL units, namely the cascading radio frequency micro-electromechanical system (RF MEMS) switches and GCPW, were employed in the proposed TTDL network to improve the delay-bandwidth product (DBW) while maintaining its compact size and low delay variation (DV). For comparison, a theoretical analysis of the RF MEMS switch was performed while observing the switch performance with various top electrodes. The MEMS TTDL network has a compact size of 5 mm × 5 mm, with a maximum delay of 200 ps and a minimum of 30 ps. The maximum insertion loss of 9 states is 10 dB, and the in/out return loss is better than 20 dB across 2-42 GHz. The group delay variations are within ±2.5% for all the delay states over the operating frequency range. To the best of our knowledge, the proposed TTDL network obtains the most control bits among the TTDL networks offered to date.
RESUMEN
Aggressive space mapping (ASM) is a common filter simulation and debugging method. It plays an important role in the field of microwave device design. This paper introduces ASM and presents the design and fabrication of a compact fifth-order microstrip interdigital filter with a center frequency of 2.5 GHz and a relative bandwidth of 10% using ASM. The filter used a double-layer silicon substrate structure and stepped impedance resonators (SIRs) and was optimized by ASM. After five iterations, the filter achieved the design specification, which greatly improves the efficiency of the filter design compared with the traditional method. It was fabricated on high-resistance silicon wafers by micro-electro-mechanical systems (MEMSs) technology, and the final size of the chip is 9.5 mm × 7.6 mm × 0.8 mm. The measurement results show that the characteristics of the filter are similar to the simulation results, which also shows the efficiency and precision of the ASM algorithm.
RESUMEN
A molecular simulation technique is employed to investigate the transport of H2/CH4 mixture through the two-dimensional (2D) channel between adjacent graphene layers. Pristine graphene membrane (GM) with pore width of 0.515~0.6 nm is found to only allow H2 molecules to enter rather than CH4, forming a molecular sieve. At pore widths of 0.64~1.366 nm, both H2 and CH4 molecules could fill into the GM channel, where the permeability of methane is more preferential than that of hydrogen with the largest CH4/H2 selectivity (1.89) at 0.728 nm. The edge functionalization by -H, -F, -OH, -NH2, and -COOH groups could significantly alter gas permeability by modifying the active surface area of the pore and tuning attractive and/or repulsive interaction with molecules at the entrance of channel. At the pore width of 0.6 nm, the H2 permeability of molecular sieve is enhanced by -H, -F, and -OH groups but restrained by -NH2, especially -COOH with a passing rate of zero. At pore widths of 0.64 and 0.728 nm, both -H and -F edge-functionalized GMs show a preferential selectivity of methane over hydrogen, while the favorable transport for GM-OH is changed from H2 molecules at 0.64 nm to CH4 molecules at 0.728 nm. For GM-NH2, it exhibits an excellent hydrogen molecular sieve at 0.64 nm and then turns into a significant H2/CH4 selectivity at 0.728 nm. Meanwhile, small H2 molecules start to enter the channel of GM-COOH at the pore width up to 0.728 nm. For the largest pore width of 1.336 nm, the influence of edge functionalization becomes small, and a comparable CH4/H2 selectivity is observed for all the considered membranes.