Tirofiban for Stroke without Large or Medium-Sized Vessel Occlusion.

BACKGROUND: The effects of the glycoprotein IIb/IIIa receptor inhibitor tirofiban in patients with acute ischemic stroke but who have no evidence of complete occlusion of large or medium-sized vessels have not been extensively studied. METHODS: In a multicenter trial in China, we enrolled patients with ischemic stroke without occlusion of large or medium-sized vessels and with a National Institutes of Health Stroke Scale score of 5 or more and at least one moderately to severely weak limb. Eligible patients had any of four clinical presentations: ineligible for thrombolysis or thrombectomy and within 24 hours after the patient was last known to be well; progression of stroke symptoms 24 to 96 hours after onset; early neurologic deterioration after thrombolysis; or thrombolysis with no improvement at 4 to 24 hours. Patients were assigned to receive intravenous tirofiban (plus oral placebo) or oral aspirin (100 mg per day, plus intravenous placebo) for 2 days; all patients then received oral aspirin until day 90. The primary efficacy end point was an excellent outcome, defined as a score of 0 or 1 on the modified Rankin scale (range, 0 [no symptoms] to 6 [death]) at 90 days. Secondary end points included functional independence at 90 days and a quality-of-life score. The primary safety end points were death and symptomatic intracranial hemorrhage. RESULTS: A total of 606 patients were assigned to the tirofiban group and 571 to the aspirin group. Most patients had small infarctions that were presumed to be atherosclerotic. The percentage of patients with a score of 0 or 1 on the modified Rankin scale at 90 days was 29.1% with tirofiban and 22.2% with aspirin (adjusted risk ratio, 1.26; 95% confidence interval, 1.04 to 1.53, P = 0.02). Results for secondary end points were generally not consistent with the results of the primary analysis. Mortality was similar in the two groups. The incidence of symptomatic intracranial hemorrhage was 1.0% in the tirofiban group and 0% in the aspirin group. CONCLUSIONS: In this trial involving heterogeneous groups of patients with stroke of recent onset or progression of stroke symptoms and nonoccluded large and medium-sized cerebral vessels, intravenous tirofiban was associated with a greater likelihood of an excellent outcome than low-dose aspirin. Incidences of intracranial hemorrhages were low but slightly higher with tirofiban. (Funded by the National Natural Science Foundation of China; RESCUE BT2 Chinese Clinical Trial Registry number, ChiCTR2000029502.).

Solibacillus ferritrahens sp. nov., a novel siderophore-producing bacterium isolated from Wumeng Mountain National Nature Reserve in Yunnan Province.

A gram-stain-positive, aerobic, rod-shaped bacterial strain capable of producing siderophores, named YIM B08730T, was isolated from a soil sample collected from Wumeng Mountain National Nature Reserve, Zhaotong City, Yunnan Province. Growth occurred at 10-45 °C (optimum, 35-40 â„ƒ), pH 7.0-9.0 (optimum, 7.0) and in the presence of 0-5 % (w/v) NaCl (optimum, 0-1 %, w/v). A comparative analysis of the 16S rRNA gene sequence (1558 bp) of strain YIM B08730T showed the highest similarity to Solibacillus isronensis JCM 13838T (96.2 %), followed by Solibacillus silvestris DSM 12223T (96.0 %) and Solibacillus kalamii ISSFR-015T (95.4 %). The main polar lipids were diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, phosphatidylserine and one unidentified lipid. The main respiratory quinone of strain YIM B08730T was menaquinone 7 (MK-7). The major fatty acids were iso-C15:0 and C16:1ω7c alcohol. The digital DNA-DNA hybridization and average nucleotide identity values between strain YIM B08730T and the reference strain S. isronensis JCM 13838T were 24.8 % and 81.2 %, respectively. The G + C content of the genomic DNA was 37.1 mol%. The genome of the novel strain contained genes associated with the production of siderophores, and it also revealed other functional gene clusters involved in plant growth promotion and soil bioremediation. Based on these phenotypic, chemotaxonomic and phylogenetic analyses, strain YIM B08730T is considered to be a novel species of the genus Solibacillus, for which the name Solibacillus ferritrahens sp. nov. is proposed. The type strain is YIM B08730T (= NBRC 116268T = CGMCC 1.60169T).

Asymmetric C3-Allylation of Pyridines.

Asymmetric intermolecular C-H functionalization of pyridines at C3 is unprecedented. Herein, we report the first examples of such transformations: specifically, C3-allylation of pyridines via tandem borane and iridium catalysis. First, borane-catalyzed pyridine hydroboration generates nucleophilic dihydropyridines; then, the dihydropyridine undergoes enantioselective iridium-catalyzed allylation; and finally, oxidative aromatization with air as the oxidant gives the C3-allylated pyridine. This protocol provides direct access to C3-allylated pyridines with excellent enantioselectivity (up to >99% ee) and is suitable for late-stage functionalization of pyridine-containing drugs.

Pseudomonas subflava sp. nov., a new Gram-negative bacterium isolated from Guishan in Yunnan province, south-west China.

A new Gram-negative, rod-shaped, flagellated bacterium was isolated from soil in the Guishan, Xinping County, Yuxi City, Yunnan Province, China, and named YIM B01952T. Growth occurred at 10-40 °C (optimum, 30 °C), pH 6.0-9.0 (optimum, pH 7.5) and with up to ≤ 5.0% (w/v) NaCl on Tryptic Soy Broth Agar (TSA) plates. Phylogenetic analysis based on the 16S rRNA gene and draft-genome sequence showed that strain YIM B01952T belonged to the genus Pseudomonas, and was closely related to the type strain of Pseudomonas alcaligenes (sequence similarity was 98.8%). The digital DNA-DNA hybridization (dDDH) value between strain YIM B01952T and the parallel strain P. alcaligenes ATCC 14909T was 49.0% based on the draft genome sequence. The predominant menaquinone was Q-9. The major fatty acids were summed feature 8 (C18:1 ω6c and/or C18:1 ω7c), summed feature 3 (C16:1 ω6c and/or C16:1 ω7c) and C16:0. The major polar lipids were phosphatidylethanolamine, diphosphatidylglycerol, and phosphatidylglycerol. The genome size of strain YIM B01952T was 4.341 Mb, comprising 4156 predicted genes with a DNA G + C content of 66.4 mol%. In addition, we detected that strain YIM B01952T had some traditional functional genes (plant growth promotion and multidrug resistance), unique genes through genome comparison and analysis with similar strains. Based on genetic analyses and biochemical characterization, the strain YIM B01952T was identified as a novel species in the genus Pseudomonas, for which the name Pseudomonas subflava sp. nov. is proposed. The type strain is YIM B01952T (=CCTCC AB 2021498T = KCTC 92073T).

Chitinolyticbacter albus sp. Nov., A Novel Chitin-Degrading Bacterium Isolated from Ancient Wood Rhizosphere Soil.

In this study, a novel aerobic mesophilic bacterial strain with capable of degrading chitin, designated YIM B06366T, was isolated and classified. The rod-shaped, Gram-stain-negative, on-spore-forming bacterium originated from rhizosphere soil sample collected in Kunming City, Yunnan Province, southwest PR China. Strain YIM B06366T exhibited growth at temperatures between 20 and 35 °C (optimum, 30 °C) and at pH 6.0-8.0 (optimum, pH 6.0). The analysis of 16S rRNA gene sequence similarity revealed that strain YIM B06366T was most closely related to type strain Chitinolyticbacter meiyuanensis SYBC-H1T (98.9%). Phylogenetic analysis based on genome data indicated that strain YIM B06366T should be assigned to the genus Chitinolyticbacter. The Average Nucleotide Identity (ANI) and digital DNA-DNA Hybridization (dDDH) values between strain YIM B06366T and the reference strain Chitinolyticbacter meiyuanensis SYBC-H1T were 84.4% and 27.7%, respectively. The major fatty acids included Summed Feature 3 (C16:1 ω6c/C16:1 ω7c), Summed Feature 8 (C18:1 ω6c/C18:1 ω7c), and C16:0. The polar lipids were diphosphatidylglycerol, phosphatidylethanolamine, aminophospholipids, and two unidentified phospholipids. The predominant menaquinone was Q-8, and the genomic DNA G + C content was 64.1%. Considering the polyphasic taxonomic evidence, strain YIM B06366T is proposed as a novel species within the genus Chitinolyticbacter, named Chitinolyticbacter albus sp. nov. (type strain YIM B06366T = KCTC 92434T = CCTCC AB 2022163T).

Clonorchis sinensis Reinfection Rate and Reinfection Determinants: A Prospective Cohort Study in Hengxian County, Guangxi, China.

BACKGROUND: To understand Clonorchis sinensis reinfection and the determinants of reinfection in endemic areas is important in establishment of control measures. METHODS: A prospective cohort study was implemented in Hengxian County, Guangxi, China. Individuals with C. sinensis infection were completely treated, and those cured were enrolled as study subjects and followed up for 3, 6, and 12 months. The reinfection frequency and incidence were calculated, and a multivariable Cox proportional hazard model was constructed to capture reinfection determinants. RESULTS: Among 635 enrolled subjects, 436 (68.7%) completed follow-up. Of these, 177 (40.6%) were reinfected; 133 (75.1%) were reinfected once, 41 (23.2%) twice, and 3 (1.7%) three times. The incidence of reinfection was 64.0 per 100 person-years. Men (adjusted hazard ratio [aHR], 1.67; 95% confidence interval [CI], 1.14-2.44), those with underlying diseases (aHR, 1.41; 95% CI, 1.02-1.95), and those with moderate- or heavy-intensity infections (aHR, 1.45; 95% CI, 1.14-1.85) had increasing reinfection probabilities. CONCLUSIONS: C. sinensis reinfection is high in endemic areas. Men and high-intensity infection are important determinants of reinfection. Repeated chemotherapy is necessary to control reinfection and its associated morbidities, especially in high-risk individuals. In addition, behavioral education is advised to decrease overall reinfection in endemic areas.

Borane-Catalyzed C3-Alkylation of Pyridines with Imines, Aldehydes, or Ketones as Electrophiles.

Achieving C3-selective pyridine functionalization is a longstanding challenge in organic chemistry. The existing methods, including electrophilic aromatic substitution and C-H activation, often require harsh reaction conditions and excess pyridine and generate multiple regioisomers. Herein, we report a method for borane-catalyzed tandem reactions that result in exclusively C3-selective alkylation of pyridines. These tandem reactions consist of pyridine hydroboration, nucleophilic addition of the resulting dihydropyridine to an imine, an aldehyde, or a ketone, and subsequent oxidative aromatization. Because the pyridine is the limiting reactant and the reaction conditions are mild, this method constitutes a practical tool for late-stage functionalization of structurally complex pharmaceuticals bearing a pyridine moiety.

Cohnella mopanensis sp. nov., a new Gram-negative bacterium isolated from soil in Xinping Mountain National Forest Park.

A Gram-stain-negative, aerobic, rod-shaped bacteria strain, named YIM B01951T, was isolated from a forest soil sample collected from Mopan Mountain National Forest Park, Xinping City, Yunnan Province, southwest PR China (101°58'06" N, 23°03'02" E). Growth occurred at 15-40 °C (optimum, 30 °C), pH 5.0-8.0 (optimum, pH 6.5) and with up to ≤ 3.0% (w/v) NaCl on Nutrient Agar plates. The results of 16S rRNA gene sequence similarity analysis showed that strain YIM B01951T was closely related to the type strain of Cohnella arctica M9-62T (96.5%) and Cohnella lupini RLAHU4BT (96.3%). YIM B01951T contains anteiso-C15:0 and iso-C16:0 as the major cellular fatty acids; the main polar lipids are diphosphatidylglycerol (DPG), phosphatidylglycerol (PG), phosphatidylethanolamine (PE), lysylphosphatidylglycerol (PGL) and five aminophospholipids (APL). The MK-7 is the major respiratory quinone and the DNA G + C content is 49.2 mol%. Based on these phenotypic, chemotaxonomic and phylogenetic analyses, strain YIM B01951T is considered to be a novel species of the genus Cohnella, and named Cohnella mopanensis sp. nov. The type strain is YIM B01951T (= NBRC 115331T = KCTC 43370T).

Brevibacillus daliensis sp. nov., Isolated From Soil in Machangqing Nature Reserve.

A new aerobic bacterial strain, designated strain YIM B02290T, was isolated from the soil of Machangqing, Dali city, Yunnan Province, China. Cells were Gram-stain-positive, sporogenous, rod-shaped, and motile with peritrichous flagella. Strain YIM B02290T showed the highest 16S rRNA gene sequence similarity with Brevibacillus laterosporus (97.6%) and Brevibacillus halotolerans (97.6%). The ANI and dDDH values between strain YIM B02290T and the two reference strains Brevibacillus laterosporus LAM00312T and Brevibacillus halotolerans DSM 25T are 72.6% and 72.2%, 20.2% and 19.5% based on the draft genome sequence, respectively. The major cellular fatty acids contain anteiso-C15: 0 and iso-C15: 0. The diagnostic diamino acid of the cell-wall peptidoglycan was meso-diaminopimelic acid. The predominant menaquinone was identified as menaquinone-7. The main polar lipids of strain YIM B02290T were diphosphatidylglycerol, phosphatidylglycerol, phospholipid, phosphatidyl monomethylethanolamine. The genomic DNA G + C content was 40.6 mol%. All results showed that strain YIM B02290T represents a novel species of the genus Brevibacillus, for which the name Brevibacillus daliensis sp. nov. is proposed. The type strain is YIM B02290T (= CCTCC AB 2021094T = CGMCC 1.18802T = KCTC 43376T).

Biomechanical analysis of stress around the tilted implants with different cantilever lengths in all-on-4 concept.

BACKGROUND: Many clinical studies have reported the high success rate of the All-on-4 concept. In the present study, we aimed to compare the stress distribution with different tilted distal implants and cantilever lengths in an All-on-4 system using the two-dimensional photoelastic method and to establish the All-on-4 implant photoelastic model by computer-aided design (CAD) and rapid prototyping (RP).  METHODS: The data of the human edentulous mandible were acquired by computed tomography (CT). Three human edentulous mandible All-on-4 implant models with different distally inclined implant holes were fabricated using Mimic, Geomagic Studio software, and a light solidifying fast shaping machine. Then the final photoelastic models were established through the traditional method. Each of the three models had four NobelSpeedy Replace implants between the interforaminal regions. The two posterior implants were placed 0, 15, and 45 degrees distally before the mental foramen. The four implants were splinted by wrought cobalt-chromium alloy frameworks. Each of the three photoelastic models was submitted to a 150 N vertical load at five points on the framework: the central fossa of the mandibular first molar, and 0 mm, 5 mm, 10 mm, and 15 mm of the cantilever length. The stress produced in the models was photographed with a digital camera, and the highest value of the stressed fringe pattern was recorded. RESULTS: The All-on-4 implant photoelastic model established by CAD and RP was highly controllable and easy to modify. The position and inclination of implants were accurate, and the frameworks could be passively emplaced. The stress values were higher around a single tilted implant compared with the distal implant in All-on-4 with the same inclination. The 0-degree distal implant and 45-degree distal implant demonstrated the highest and lowest stress when loading at the central fossa of the mandibular first molar, respectively. With the same inclination of distal implant, the peri-implant bone stress increased as the length of cantilever increased. CONCLUSION: The method of establishing the All-on-4 implant photoelastic model by CAD and RP was highly controllable, convenient, fast, and accurate. The tilted implants splinted in the fully fixed prosthesis with reduced cantilever lengths did not increase the stress level compared with the vertical distal implants.And this illustrated that the influence of cantilever on stress distribution was greater than the influence of implant inlination.

Realization of compact Watt-level single-frequency continuous-wave self-tuning titanium: sapphire laser.

Here, we present a compact Watt-level single-frequency continuous-wave (CW) self-tuning titanium:sapphire (Ti:S) laser, which is implemented using a three-plate Ti:S crystal as both a gain medium and frequency-tuning element. The thickness ratio of the three-plate Ti:S crystal is 1:2:4, of which the thinnest plate measured 1 mm. The optical axes lie on their own surfaces and parallel to each other. Based on the presented self-tuning crystal, a ring resonator is designed and built. The maximum wavelength tuning range of the single-frequency self-tuning Ti:S laser is 108.84 nm, as demonstrated experimentally by rotating the three-plate Ti:S crystal, indicating good agreement with theoretical prediction. To the best of our knowledge, this is the first study to report a single-frequency CW self-tuning Ti:S laser, which can provide a feasible approach for achieving a compact all-solid-state single-frequency CW-tunable Ti:S laser.

Identification of hub genes correlated with sleep deprivation using co-expression analysis.

BACKGROUND: Sleep deprivation (SD) has become a serious concern worldwide. This study aimed to identify key modules and candidate hub genes correlated with diseases caused by SD, using co-expression analysis. METHODS: The weighted gene co-expression network analysis was performed to construct a co-expression network of hub genes correlated with SD. Gene Ontology and Kyoto Encyclopedia of Genes and Genomes enrichment analyses were performed to search for signaling pathways. The protein-protein interaction network analysis of central genes was performed to recognize the interactions among central genes. Molecular Complex Detection, a plugin in Cytoscape, was used to discover the hub gene clusters involved in SD. RESULTS: A total of 564 genes in the yellow module were identified based on the results of topological overlap measure-based clustering. The yellow module showed a pivotal correlation with SD. Six hub gene clusters prominently associated with SD were identified. Heat shock protein family and circadian clock genes among them may be the hub genes involved in SD. CONCLUSIONS: These genes and pathways might become therapeutic targets with clinical usefulness in the future.

The effects of endodontic access cavity design on dentine removal and effectiveness of canal instrumentation in maxillary molars.

AIM: To evaluate in a laboratory setting, the impact of three designs of endodontic access cavities on dentine removal and effectiveness of canal instrumentation in extracted maxillary first molars using micro-computed tomography (micro-CT). METHODOLOGY: A total of 30 extracted intact maxillary first molars were selected and scanned by micro-CT with a voxel size of 24 µm and randomly distributed into three groups: the traditional endodontic cavity (TEC) group, the conservative endodontic cavity (CEC) group and the guided endodontic cavity (GEC) group. The pulp chambers of teeth in the groups were accessed accordingly. After root canal preparation, the teeth were rescanned. The volume of dentine removed after canal preparation, the noninstrumented canal areas, canal transportation and centring ratio were analysed. Data were analysed statistically using one-way analysis of variance. Tukey's post hoc test was used for multiple comparisons. The significance level was set at p < .05. RESULTS: The total volume of dentine removed was significantly greater in the TEC group after root canal preparation (p < .05). No significant differences in the volume of dentine removed occurred between the CEC and GEC groups (p > .05). The volume of dentine removed in the crown, pericervical dentine and coronal third of the canal was significantly lower in CEC and GEC groups when compared to that in the TEC group (p < .05), no difference was observed in the middle third of the canal and apical third of the canal amongst the three groups (p > .05). There was no significant difference in noninstrumented canal area, canal transportation and centring ratio amongst the TEC, CEC and GEC groups (p > .05). CONCLUSIONS: In extracted maxillary molars tested in a laboratory setting, CEC and GEC preserved more tooth tissue in the crown, pericervical dentine and coronal third of the canal compared with TEC after root canal preparation. The design of the endodontic access cavity did not impact on the effectiveness of canal instrumentation in terms of noninstrumented canal area, canal transportation and centring ratio.

Toll-like receptors and hepatitis C virus infection.

BACKGROUND: Hepatitis C virus (HCV) infection is a worldwide issue. However, the current treatment for hepatitis C has many shortcomings. Toll-like receptors (TLRs) are pattern recognition receptors involved in HCV infection, and an increasing number of studies are focusing on the role of TLRs in the progression of hepatitis C. DATA SOURCES: We performed a PubMed search up to January 2021 with the following keywords: hepatitis C, toll-like receptors, interferons, inflammation, and immune evasion. We also used terms such as single-nucleotide polymorphisms (SNPs), susceptibility, fibrosis, cirrhosis, direct-acting antiviral agents, agonists, and antagonists to supplement the query results. We reviewed relevant publications analyzing the correlation between hepatitis C and TLRs and the role of TLRs in HCV infection. RESULTS: TLRs 1-4 and 6-9 are involved in the process of HCV infection. When the host is exposed to the HCV, TLRs, as important participants in HCV immune evasion, trigger innate immunity to remove the virus and also promote inflammation and liver fibrosis. TLR gene SNPs affect hepatitis C susceptibility, treatment, and prognosis. The contribution of each TLR to HCV is different. Drugs targeting various TLRs are developed and validated, and TLRs can synergize with classic hepatitis C drugs, including interferon and direct-acting antiviral agents, constituting a new direction for the treatment of hepatitis C. CONCLUSIONS: TLRs are important receptors in HCV infection. Different TLRs induce different mechanisms of virus clearance and inflammatory response. Although TLR-related antiviral therapy strategies exist, more studies are needed to explore the clinical application of TLR-related drugs.

Architecture of the cancellous bone in human proximal tibia based on P45 sectional plastinated specimens.

PURPOSE: To reveal differences in the pattern of trabecular architecture in the epiphysis and metaphysis of the proximal tibia. METHODS: The trabecular architecture of the proximal tibia was observed in 27 P45 plastinated knee specimens. RESULTS: In the medial and lateral condyles, under the articular cartilage surrounded by the medial or lateral meniscus, the cancellous bone is formed by thick and dense trabecular bands, which run longitudinally in the epiphysis and then pass through the epiphyseal line to terminate on the slanted cortex of the metaphysis. In the intercondylar eminence, the trabeculae are arranged basically in a network. In the central portion of the tibial metaphysis, cancellous bone consists of fine arcuate trabeculae, which extend to the anterior and posterior cortices, respectively. These trabeculae are intersected sparsely and form trusses over the medullary cavity. Near the areas of attachment of the iliotibial tract, tibial collateral ligament, anterior and posterior cruciate ligaments, and patellar ligament, the cancellous bone is locally reinforced with patchy trabeculae, dense radiating trabeculae, or two orthotropic trabecular bands. CONCLUSION: This study provides further accurate anatomical information on the trabeculae of the proximal tibia. The soft structures of knee joint, including the articular cartilage, menisci, and ligaments, and the slanted cortices of the metaphysis are important landmarks for the location of different arrangements of the cancellous architecture. The present results are beneficial for clinical diagnosis and treatment of pathologies of the knee joint, or the establishment of a finite element analysis model of the knee joint.

[Yishen Tonglong Decoction inhibits the epithelial-mesenchymal transition and Ras/ERK signaling pathway in human prostate cancer DU-145 cells].

Objective: To observe the effect of Yishen Tonglong Decoction (YTD) on the epithelial-mesenchymal transition (EMT) and Ras/ERK signaling pathway in human PCa DU-145 cells and explore its action mechanism. METHODS: We treated human PCa DU-145 cells with normal plasma (the blank control) or plasma containing 5% (low-dose), 10% (medium-dose) and 15% (high-dose) YTD. After intervention, we examined the proliferation of the DU-145 cells in different groups with CCK-8 and their apoptosis by Annexin V/PI double staining. We detected the cell cycle by PI assay, the invasion and migration of the cells using the Transwell chamber and scratch test, and the expressions of the proteins and genes related to the EMT and Ras/ERK signaling pathways in the cells by Western blot and RT-PCR. RESULTS: Compared with the blank control group, high-, medium- and low-dose YTD significantly inhibited the proliferation of the PCa DU-145 cells, decreased their adherence and growth (P < 0.05, P < 0.01), promoted their apoptosis (P < 0.01), regulated their cell cycles (P < 0.05, P < 0.01), and reduced their in vitro invasion and migration abilities (P < 0.05), all in a dose-dependent manner. The results of Western blot and RT-PCR revealed down-regulated protein and mRNA expressions of N-cadherin, zinc finger transcription factor (Snail), Ras, p-ERK1/2 and ERK1/2, but up-regulated protein and mRNA expressions of E-cadherin in the PCa DU-145 cells treated with YTD (P < 0.05, P < 0.01). CONCLUSIONS: Yishen Tonglong Decoction can effectively inhibit the proliferation, promote the apoptosis, regulate the cell cycle and suppress the invasion and migration abilities and EMT process of human PCa DU-145 cells. The mechanism of Yishen Tonglong Decoction acting on PCa may be associated with its inhibitory effect on the EMT process and expression of the Ras/ERK signaling pathway in PCa cells./.

Imported Schistosomiasis, China, 2010-2018.

China has made remarkable progress in reducing schistosomiasis caused by Schistosoma japonicum over the past 7 decades but now faces a severe threat from imported schistosomiasis. Results from national surveillance during 2010-2018 indicate integrating active surveillance into current surveillance models for imported cases is urgently needed to achieve schistosomiasis elimination in China.

Electrical friction modulation on MoS2 using electron beam radiation without electrostatic interactions.

Nanoscale friction under different electronic states and the corresponding friction controlling methods are both scientifically interesting and technologically important. However, friction measurements under electrical modulation are severely hampered by electrostatic forces induced by the charge-trapping effect. Therefore, in this study, we developed a new modulation method free from the charge-trapping effect through electron beam radiation; this method successfully modulated the friction between few-layer MoS2 and the silicon tip on atomic force microscopy. Friction on monolayer MoS2 increased under electron beam radiation. Strong correlations between the accelerating voltage, beam current, and friction force were found, and constant adhesion force demonstrate that the influence of static electricity was eliminated in this method. Excited electron states caused by electron injection could be possible mechanisms for friction modulation. However, the electron beam radiation had a negligible influence on the friction of bilayer MoS2. This study is the first of its kind, revealing the effect of electron beam radiation and electronic states on friction, which is important for the development of tribological theories and nanoelectromechanical systems, and offers a new electrical modulation method for friction tuning.

Inverse design of an indoor environment using a filter-based topology method with experimental verification.

In order to create a healthy, comfortable, productive, and energy-efficient indoor environment, the computational fluid dynamics (CFD)-based adjoint method with an area-constrained topology method can be used to inversely design the optimal number, size, location, and shape of air supply inlets and air supply parameters. However, this method is not very mature, and the distribution of retained inlets is always scattered. To solve that problem, this investigation introduced a filter method that smooths the intermediate results during the inverse design process. Using a three-dimensional, non-isothermal, asymmetrical office with pre-set air supply inlets as an example, this study verified the performance of the proposed filter-based topology method. The verified method was then used to solve a multi-objective design problem and design an optimal indoor environment for a room. The results indicate that the proposed method was able to find the optimal number, location, and shape of air supply inlets and the optimal air supply temperature, velocity, and angle that led to a thermally comfortable, healthy, productive, and energy-efficient indoor environment. Finally, this investigation installed the optimal inlets in an environmental chamber to mimic the room. The measured air temperature, velocity, and mean age of air in several typical locations in the environmental chamber matched the CFD simulation results very closely.