RESUMEN
BiFeO3 (BFO) thin films were grown by chemical solution deposition on a range of electrodes to determine their role in controlling the phase formation and microstructure of the films. The crystallization on oxide electrodes followed the sequence: amorphous â Bi2O2(CO3) â perovskite, while those on Pt crystallized directly from the amorphous phase. IrO2 electrodes promoted perovskite phase formation at the lowest temperature and LaNiO3 additionally induced local epitaxial growth. All compositions exhibited fully coherent Fe-rich precipitates within the grain interior of the perovskite matrix, whereas the incoherent Bi2Fe4O9 second phase was also observed at the grain boundaries of BFO grown on Pt electrodes. The latter could be observed by X-ray diffraction as well as transmission electron microscopy (TEM) but coherent precipitates were only observed by TEM, principally evidenced by their Z contrast in annular dark field images. These data have pronounced consequences for the extended use of BFO films under an applied field for actuator, sensor and memory applications.
RESUMEN
Carbon fullerenes and nanotubes revolutionized understandingof the reactivity of nanoscale compounds. Subsequently, our group and others discovered analogous inorganic compounds with hollow, closed nanostructures. Such inorganic nanostructures offer many applications, particularly in the energy and electronics industries. One way to create inorganic nanostructures is via misfit layer-ed compounds (MLC), which are stacks of alternating two-dimensional molecular slabs, typically held together via weak van der Waals forces. They contain "misfits" in their a-b plane structures that can make them unstable, leading to collapse of the slabs into tubular nanostructures. For example, metal chalcogenide MLCs of the general formula (MX)1+y/TX2 (M = Sn, Pb, Bi, Sb, and other rare earths; T = Sn, Ti, V, Cr, Nb, Ta, etc.; X = S or Se) consist of a superstructure of alternating layers where the MX unit belongs to a (distorted NaCl) orthorhombic symmetry group (O), the TX2 layer possesses trigonal (T) or octahedral symmetry, and the two layers are held together via both van der Waals and polar forces. A misfit in the a axis or both a and b axes of the two sublattices may lead to the formation of nanostructures as the lattices relax via scrolling. Previous research has also shown that the abundance of atoms with dangling bonds in the rims makes nanoparticles of compounds with layered structure unstable in the planar form, and they tend to fold into hollow closed structures such as nanotubes. This Account shows that combining these two triggers, misfits and dangling bond annihilation in the slab rims, leads to new kinds of nanotubes from MLCs. In particular, we report the structure of two new types of nanotubes from misfits, namely, the SnS/SnS2 and PbS/NbS2 series. To decipher the complex structures of these nanotubes, we use a range of methods: high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDS), selected area electron diffraction (SAED) analyses, scanning electron microscopy (SEM), and Cs-corrected scanning transmission electron microscopy (STEM) in the high-angle annular dark-field mode (HAADF). In both new types, the lattice mismatch between the two alternating sublayers dictates the relative layer-stacking order and leads to a variety of chiral tubular structures. In particular, the incommensuration (a type of misfit) of the SnS2/SnS system in both the (in plane) a and b directions leads to a variety of relative in-plane orientation and stacking orders along the common c-axis. Thus the SnS/SnS2 nanotubes form superstructures with the sequence O-T and O-T-T, and mixtures thereof. We also report nanotubes of the misfit layered compound (PbS)1.14NbS2, and of NbS2 intercalated with Pb atoms, with the chemical formula PbNbS2. Thus, the possibility to use two kinds of folding mechanisms jointly offers a new apparatus for the synthesis of unique 1-D nanostructures of great complexity and a potentially large diversity of physicochemical properties.
RESUMEN
This work reports the analysis of the distribution of Gd atoms and the quantification of O vacancies applied to individual CeO2 and Gd-doped CeO2 nanocrystals by electron energy-loss spectroscopy. The concentration of O vacancies measured on the undoped system (6.3±2.6 %) matches the expected value given the typical Ce(3+) content previously reported for CeO2 nanoparticles. The doped nanoparticles have an uneven distribution of dopant atoms and an atypical amount of O vacant sites (37.7±4.1 %). The measured decrease of the O content induced by Gd doping cannot be explained solely by the charge balance including Ce(3+) and Gd(3+) ions.
RESUMEN
Silicon has several advantages when compared to other thermoelectric materials, but until recently it was not used for thermoelectric applications due to its high thermal conductivity, 156 W K(-1) m(-1) at room temperature. Nanostructuration as means to decrease thermal transport through enhanced phonon scattering has been a subject of many studies. In this work we have evaluated the effects of nanostructuration on the lattice dynamics of bulk nanocrystalline doped silicon. The samples were prepared by gas phase synthesis, followed by current and pressure assisted sintering. The heat capacity, density of phonons states, and elastic constants were measured, which all reveal a significant, ≈25%, reduction in the speed of sound. The samples present a significantly decreased lattice thermal conductivity, ≈25 W K(-1) m(-1), which, combined with a very high carrier mobility, results in a dimensionless figure of merit with a competitive value that peaks at ZT≈ 0.57 at 973 °C. Due to its easily scalable and extremely low-cost production process, nanocrystalline Si prepared by gas phase synthesis followed by sintering could become the material of choice for high temperature thermoelectric generators.
RESUMEN
A theoretical approach aiming at the prediction of segregation of dopant atoms on nanocrystalline systems is discussed here. It considers the free energy minimization argument in order to provide the most likely dopant distribution as a function of the total doping level. For this, it requires as input (i) a fixed polyhedral geometry with defined facets, and (ii) a set of functions that describe the surface energy as a function of dopant content for different crystallographic planes. Two Sb-doped SnO2 nanocrystalline systems with different morphology and dopant content were selected as a case study, and the calculation of the dopant distributions expected for them is presented in detail. The obtained results were compared to previously reported characterization of this system by a combination of HRTEM and surface energy calculations, and both methods are shown to be equivalent. Considering its application pre-requisites, the present theoretical approach can provide a first estimation of doping atom distribution for a wide range of nanocrystalline systems. We expect that its use will support the reduction of experimental effort for the characterization of doped nanocrystals, and also provide a solution to the characterization of systems where even state-of-art analytical techniques are limited.
RESUMEN
A new procedure for the synthesis of MoS(2) nanotubes is reported, and additionally demonstrated for MoSe(2), WS(2), and WSe(2). Highly concentrated sunlight creates continuous high temperatures, strong temperature gradients, and extended hot annealing regions, which, together with a metallic (Pb) catalyst, are conducive to the formation of different inorganic nanotubes. Structural characterization (including atomic resolution images) reveals a three-step reaction mechanism. In the first step, MoS(2) platelets react with water-air residues, decompose by intense solar irradiation, and are converted to molybdenum oxide. Subsequently, the hot annealing environment leads to the growth of Pb-stabilized MoO(3-x) nanowhiskers. Shortly afterward, the surface of the MoO(3-x) starts to react with the sulfur vapor supplied by the decomposition of nearby MoS(2) platelets and becomes enveloped by MoS(2) layers. Finally, the molybdenum oxide core is gradually transformed into MoS(2) nanotubes. These findings augur well for similar syntheses of as yet unattained nanotubes from other metal chalcogenides.
RESUMEN
This work presents an overview of high-resolution scanning transmission electron microscopy (HRSTEM) techniques and exemplifies the novel quantitative characterization possibilities that have emerged from recent advances in these methods. The synergistic combination of atomic resolution imaging and spectroscopy provided by HRSTEM is highlighted as a unique feature that can provide a comprehensive analytical description of material properties at the nanoscale. State-of-the-art high-angle annular dark field and annular bright field examples are depicted as well as the use of X-ray energy-dispersive spectroscopy and electron energy-loss spectroscopy for probing samples properties at the atomic scale. In addition, promising techniques such as cathodoluminescence, confocal HRSTEM, and diffraction mapping are introduced. The presented examples and results indicate that HRSTEM-related techniques are fundamental tools for comprehensive assessment of properties at the atomic scale.
RESUMEN
The development of reliable nanostructured devices is intrinsically dependent on the description and manipulation of materials' properties at the atomic scale. Consequently, several technological advances are dependent on improvements in the characterization techniques and in the models used to describe the properties of nanosized materials as a function of the synthesis parameters. The evaluation of doping element distributions in nanocrystals is directly linked to fundamental aspects that define the properties of the material, such as surface-energy distribution, nanoparticle shape, and crystal growth mechanism. However, this is still one of the most challenging tasks in the characterization of materials because of the required spatial resolution and other various restrictions from quantitative characterization techniques, such as sample degradation and signal-to-noise ratio. This paper addresses the dopant segregation characterization for two antimony-doped tin oxide (Sb:SnO(2)) systems, with different Sb doping levels, by the combined use of experimental and simulated high-resolution transmission electron microscopy (HRTEM) images and surface-energy ab initio calculations. The applied methodology provided three-dimensional models with geometrical and compositional information that were demonstrated to be self-consistent and correspond to the systems' mean properties. The results evidence that the dopant distribution configuration is dependent on the system composition and that dopant atom redistribution may be an active mechanism for the overall surface-energy minimization.
RESUMEN
Modeling of nanocrystals supported by advanced morphological and chemical characterization is a unique tool for the development of reliable nanostructured devices, which depends on the ability to synthesize and characterize materials on the atomic scale. Among the most significant challenges in nanostructural characterization is the evaluation of crystal growth mechanisms and their dependence on the shape of nanoparticles and the distribution of doping elements. This paper presents a new strategy to characterize nanocrystals, applied here to antimony-doped tin oxide (Sb-SnO(2)) (ATO) by the combined use of experimental and simulated high-resolution transmission electron microscopy (HRTEM) images and surface energy ab initio calculations. The results show that the Wulff construction can not only describe the shape of nanocrystals as a function of surface energy distribution but also retrieve quantitative information on dopant distribution by the dimensional analysis of nanoparticle shapes. In addition, a novel three-dimensional evaluation of an oriented attachment growth mechanism is provided in the proposed methodology. This procedure is a useful approach for faceted nanocrystal shape modeling and indirect quantitative evaluation of dopant spatial distribution, which are difficult to evaluate by other techniques.
RESUMEN
This work focuses on the nonaqueous synthesis of antimony-doped tin oxide nanocrystals in the size range of 2-6 nm and the investigation of their solubility in organic solvents (CHCl(3) and THF) in the presence of amphiphilic molecules (oleic acid and oleylamine). To unravel the underlying processes, a set of molecular dynamics simulations is performed involving the compatibility of oleic acid and oleylamine in mixtures with both CHCl(3) and THF. The results show that the method is useful for obtaining the desired oxide, and that the interaction between amphiphilic molecules and solvents can be predicted by molecular dynamics simulations with very good qualitative agreement.
RESUMEN
A supramolecular strategy based on strong molecular dipole moments is presented to gain access to covalent organic framework structures with high crystallinity and porosity. Antiparallel alignment of the molecules within the pore walls is proposed to lead to reinforced columnar stacking, thus affording a high-quality material. As a proof of principle, a novel pyrene dione building block was prepared and reacted with hexahydroxytriphenylene to form a boronic ester-linked covalent organic framework. We anticipate the strategy presented herein to be valuable for producing highly defined COF structures.
RESUMEN
The nature of As-Al-Fe co-precipitates aged for 120 days are investigated in detail by High Resolution Transmission Electron Microscopy (HRTEM), Scanning TEM (STEM), electron diffraction, Energy Dispersive X-Ray Spectroscopy (EDS), Electron Energy-Loss Spectroscopy (EELS), and Energy Filtered Transmission Electron Microscopy (EFTEM). The Al present in magnetite is shown to favour As incorporation (up to 1.10 wt%) relative to Al-free magnetite and Al-goethite, but As uptake by Al-magnetite decreases with increasing Al substitution (3.53-11.37 mol% Al). Arsenic-bearing magnetite and goethite mesocrystals (MCs) are formed by oriented aggregation (OA) of primary nanoparticles (NPs). Well-crystalline magnetite likely formed by Otswald ripening was predominant in the Al-free system. The As content in Al-goethite MCs (having approximately 13% substituted Al) was close to the EDS detection limit (0.1 wt% As), but was below detection in Al-goethites with 23.00-32.19 mol% Al. Our results show for the first time the capacity of Al-magnetite to incorporate more As than Al-free magnetite, and the role of Al in favouring OA-based crystal growth under the experimental conditions, and therefore As retention in the formed MCs. The proposed mechanism of As incorporation involves adsorption of As onto the newly formed NPs. Arsenic is then trapped in the MCs as they grow by self-assembly OA upon attachment of the NPs. We conclude that Al may diffuse to the crystal faces with high surface energy to reduce the total energy of the system during the attachment events, thus favouring the oriented aggregation.
Asunto(s)
Aluminio/química , Arsénico/aislamiento & purificación , Nanopartículas de Magnetita/química , Nanopartículas/química , Nanotecnología/métodos , Adsorción , Arsénico/química , Cristalización , Restauración y Remediación Ambiental , Óxido Ferrosoférrico/química , Compuestos de Hierro/química , Nanopartículas del Metal/química , Microscopía Electrónica de Transmisión de Rastreo , Microscopía Electrónica de Transmisión , Minerales/química , Espectroscopía de Pérdida de Energía de ElectronesRESUMEN
There is increasing interest in the development of new magnetic polymeric carriers for biomedical applications such as trigger-controlled drug release, magnetic hyperthermia (MH) for the treatment of cancer, and as contrast agents in magnetic resonance imaging (MRI). This work describes the synthesis of sub-micrometer and magnetic polymer nanocomposite capsules (MPNCs) by combining in one single platform the biodegradable polymer poly-ε-caprolactone (PCL) and different concentrations of â¼8 nm oleic acid (OA)-functionalized magnetite nanoparticles (Fe3O4@OA), employing the oil-in-water emulsion/solvent evaporation method. The MPNCs showed a significant increase in particle size from â¼400 to â¼800 nm as the magnetic loading in the organic-inorganic hybrids increases from 1.0% to 10%. The MPNCs presented high incorporation efficiency of Fe3O4@OA nanoparticles, good colloidal stability, and super-paramagnetic properties. Interestingly, electron microscopy results showed that the Fe3O4@OA nanoparticles were preferentially located at the surface of the capsules. Evaluation of the magnetic properties showed that the saturation magnetization and the blocking temperature of the MPNCs samples increased as a function of the Fe3O4@OA loading. All the MPNCs exhibited heating when subjected to MH, and showed good specific absorption rates. Use of the formulations decreased the longitudinal (T1) and transverse (T2) relaxation times of water protons' nuclei, with excellent transverse relaxivity (r2) values, especially in the case of the formulation with lowest Fe3O4@OA loading. Furthermore, the MPNCs-cell interaction was studied, and MPNCs showed lower cellular toxicity to normal cells compared to cancer cells. These findings help in understanding the relationships between magnetic nanoparticles and polymeric capsules, opening perspectives for their potential clinical uses as simultaneous heating sources and imaging probes in MH and MRI, respectively.
RESUMEN
This work presents the morphological characterization of CeO2 nanocrystals by the analysis of single unfiltered high-angle annular dark-field (HAADF)-high-resolution scanning transmission electron microscopy (HRSTEM) images. The thickness of each individual atomic column is estimated by the classification of its HAADF integrated intensity using a Gaussian mixture model. The resulting thickness maps obtained from two example nanocrystals with distinct morphology were analyzed with aid of the symmetry from the CeO2 crystallographic structure, providing an approximation for their 3-D morphology with high spatial resolution. A confidence level of ±1 atom per atomic column along the viewing direction on the thickness estimation is indicated by the use of multislice image simulation. The described characterization procedure stands out as a simple approach for retrieving morphological parameters of individual nanocrystals, such as volume and specific surface areas for different crystalline planes. The procedure is an alternative to the tilt-series tomography technique for a number of nanocrystalline systems, since its application does not require the acquisition of multiple images from the same nanocrystal along different zone axes.
RESUMEN
Image simulation has an invaluable importance for the accurate analysis of High Resolution Transmission Electron Microscope (HRTEM) results, especially due to its non-linear image formation mechanism. Because the as-obtained images cannot be interpreted in a straightforward fashion, the retrieval of both qualitative and quantitative information from HRTEM micrographs requires an iterative process including the simulation of a nanocrystal model and its comparison with experimental images. However most of the available image simulation software requires atom-by-atom coordinates as input for the calculations, which can be prohibitive for large finite crystals and/or low-symmetry systems and zone axis orientations. This paper presents an open source citation-ware tool named MEGACELL, which was developed to assist on the construction of nanocrystals models. It allows the user to build nanocrystals with virtually any convex polyhedral geometry and to retrieve its atomic positions either as a plain text file or as an output compatible with EMS (Electron Microscopy Software) input protocol. In addition to the description of this tool features, some construction examples and its application for scientific studies are presented. These studies show MEGACELL as a handy tool, which allows an easier construction of complex nanocrystal models and improves the quantitative information extraction from HRTEM images.
RESUMEN
In this work, we describe a kinetically controlled crystallization process assisted by an oriented attachment (OA) mechanism based on a nonaqueous sol-gel synthetic method (specifically, the reaction of titanium(IV) chloride (TiCl(4)) with n-octanol) to prepare re-crystallized anatase TiO(2) mesocrystals (single crystal). The kinetics study revealed a multi-step and hierarchical process controlled by OA, and a high resolution transmission electron microscopy (HRTEM) analysis clearly shows that the synthesized mesocrystal presents a truncated bipyramidal Wulff shape, indicating that its surface is dominated by {101} facets. This shape is developed during the recrystallization step. The material developed here displayed superior photocatalytic activity under visible light irradiation compared to TiO(2)-P25 as a benchmarking.
Asunto(s)
Cristalización/métodos , Nanoestructuras/química , Nanoestructuras/ultraestructura , Titanio/química , Sustancias Macromoleculares/química , Ensayo de Materiales , Conformación Molecular , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
This work reports a detailed characterization of an anomalous oriented attachment behaviour for SnO(2) nanocrystals. Our results evidenced an anisotropic growth for two identical <110> directions, which are equivalent according to the SnO(2) crystallographic structure symmetry. A hypothesis is proposed to describe this behaviour.