Sialic Acid Conjugate-Modified Cationic Liposomal Paclitaxel for Targeted Therapy of Lung Metastasis in Breast Cancer: What a Difference the Cation Content Makes.

Cationic lipids play a pivotal role in developing novel drug delivery systems for diverse biomedical applications, owing to the success of mRNA vaccines against COVID-19 and the Phase III antitumor agent EndoTAG-1. However, the therapeutic potential of these positively charged liposomes is limited by dose-dependent toxicity. While an increased content of cationic lipids in the formulation can enhance the uptake and cytotoxicity toward tumor-associated cells, it is crucial to balance these advantages with the associated toxic side effects. In this work, we synthesized the cationic lipid HC-Y-2 and incorporated it into sialic acid (SA)-modified cationic liposomes loaded with paclitaxel to target tumor-associated immune cells efficiently. The SA-modified cationic liposomes exhibited enhanced binding affinity toward both RAW264.7 cells and 4T1 tumor cells in vitro due to the increased ratios of cationic HC-Y-2 content while effectively inhibiting 4T1 cell lung metastasis in vivo. By leveraging electrostatic forces and ligand-receptor interactions, the SA-modified cationic liposomes specifically target malignant tumor-associated immune cells such as tumor-associated macrophages (TAMs), reduce the proportion of cationic lipids in the formulation, and achieve dual objectives: high cellular uptake and potent antitumor efficacy. These findings highlight the potential advantages of this innovative approach utilizing cationic liposomes.

Search for Solar

A search for interactions from solar ^{8}B neutrinos elastically scattering off xenon nuclei using PandaX-4T commissioning data is reported. The energy threshold of this search is further lowered compared with the previous search for dark matter, with various techniques utilized to suppress the background that emerges from data with the lowered threshold. A blind analysis is performed on the data with an effective exposure of 0.48 tonne year, and no significant excess of events is observed. Among the results obtained using the neutrino-nucleus coherent scattering, our results give the best constraint on the solar ^{8}B neutrino flux. We further provide a more stringent limit on the cross section between dark matter and nucleon in the mass range from 3 to 9 GeV/c^{2}.

Development of the thermophilic fungus Myceliophthora thermophila into glucoamylase hyperproduction system via the metabolic engineering using improved AsCas12a variants.

BACKGROUND: Glucoamylase is an important enzyme for starch saccharification in the food and biofuel industries and mainly produced from mesophilic fungi such as Aspergillus and Rhizopus species. Enzymes produced from thermophilic fungi can save the fermentation energy and reduce costs as compared to the fermentation system using mesophiles. Thermophilic fungus Myceliophthora thermophila is industrially deployed fungus to produce enzymes and biobased chemicals from biomass during optimal growth at 45 °C. This study aimed to construct the M. thermophila platform for glucoamylase hyper-production by broadening genomic targeting range of the AsCas12a variants, identifying key candidate genes and strain engineering. RESULTS: In this study, to increase the genome targeting range, we upgraded the CRISPR-Cas12a-mediated technique by engineering two AsCas12a variants carrying the mutations S542R/K607R and S542R/K548V/N552R. Using the engineered AsCas12a variants, we deleted identified key factors involved in the glucoamylase expression and secretion in M. thermophila, including Mtstk-12, Mtap3m, Mtdsc-1 and Mtsah-2. Deletion of four targets led to more than 1.87- and 1.85-fold higher levels of secretion and glucoamylases activity compared to wild-type strain MtWT. Transcript level of the major amylolytic genes showed significantly increased in deletion mutants. The glucoamylase hyper-production strain MtGM12 was generated from our previously strain MtYM6 via genetically engineering these targets Mtstk-12, Mtap3m, Mtdsc-1 and Mtsah-2 and overexpressing Mtamy1 and Mtpga3. Total secreted protein and activities of amylolytic enzymes in the MtGM12 were about 35.6-fold and 51.9‒55.5-fold higher than in MtWT. Transcriptional profiling analyses revealed that the amylolytic gene expression levels were significantly up-regulated in the MtGM12 than in MtWT. More interestingly, the MtGM12 showed predominantly short and highly bulging hyphae with proliferation of rough ER and abundant mitochondria, secretion vesicles and vacuoles when culturing on starch. CONCLUSIONS: Our results showed that these AsCas12a variants worked well for gene deletions in M. thermophila. We successfully constructed the glucoamylase hyper-production strain of M. thermophila by the rational redesigning and engineering the transcriptional regulatory and secretion pathway. This targeted engineering strategy will be very helpful to improve industrial fungal strains and promote the morphology engineering for enhanced enzyme production.

Search for Cosmic-Ray Boosted Sub-GeV Dark Matter at the PandaX-II Experiment.

We report a novel search for the cosmic-ray boosted dark matter using the 100 tonne·day full dataset of the PandaX-II detector located at the China Jinping Underground Laboratory. With the extra energy gained from the cosmic rays, sub-GeV dark matter particles can produce visible recoil signals in the detector. The diurnal modulations in rate and energy spectrum are utilized to further enhance the signal sensitivity. Our result excludes the dark matter-nucleon elastic scattering cross section between 10^{-31} and 10^{-28} cm^{2} for dark matter masses from 0.1 MeV/c^{2} to 0.1 GeV/c^{2}, with a large parameter space previously unexplored by experimental collaborations.

First Search for the Absorption of Fermionic Dark Matter with the PandaX-4T Experiment.

Compared with the signature of dark matter elastic scattering off nuclei, the absorption of fermionic dark matter by nuclei opens up a new searching channel for light dark matter with a characteristic monoenergetic signal. In this Letter, we explore the 95.0-day data from the PandaX-4T commissioning run and report the first dedicated searching results of the fermionic dark matter absorption signal through a neutral current process. No significant signal was found, and the lowest limit on the dark matter-nucleon interaction cross section is set to be 1.5×10^{-50} cm^{2} for a fermionic dark matter mass of 40 MeV/c^{2} with 90% confidence level.

Search for Light Fermionic Dark Matter Absorption on Electrons in PandaX-4T.

We report a search on sub-MeV fermionic dark matter absorbed by electrons with an outgoing active neutrino using the 0.63 tonne year exposure collected by the PandaX-4T liquid xenon experiment. No significant signals are observed over the expected background. The data are interpreted into limits to the effective couplings between such dark matter and the electron. For axial-vector or vector interactions, our sensitivity is competitive in comparison to existing astrophysical bounds on the decay of such a dark matter candidate into photon final states. In particular, we present the first direct detection limits for a vector (axial-vector) interaction which are the strongest in the mass range from 35 to 55 (25 to 45) keV/c^{2} in comparison to other astrophysical and cosmological constraints.

One-pot synthesis of copper nanocluster/Tb-MOF composites for the ratiometric fluorescence detection of Cu2.

The increasing degradation of ecosystems due to heavy metal residues has led to environment and food contamination, prompting the development of convenient platforms for monitoring heavy metals. Here, a new dual-emission fluorescent sensor CuNCs@Tb@UiO-66-(COOH)2 for the detection of copper ions (Cu2+ ) has been synthesized using one-pot encapsulation of Tb(III) and glutathione-stabilized copper nanoclusters (CuNCs) into metal-organic frameworks (MOFs) UiO-66-(COOH)2 . In this ratiometric sensor, the fluorescence intensity of Tb3+ decreased significantly upon the addition of Cu2+ , whereas that of CuNCs showed good stability, together with an apparent colour change. Therefore, ratiometric fluorescence detection of Cu2+ can be accomplished by measuring the ratio of the fluorescence intensity at the 450 nm (F450 ) wavelength of CuNCs to the 548 nm (F548 ) emission of Tb3+ in the fluorescence spectra of the CuNCs@Tb@UiO-66-(COOH)2 suspension. Moreover, the obtained fluorescent probe showed good results in the detection of actual samples. This work can provide the basis of method for the exploration of ratiometric fluorescence and visual sensors of trace pollutants analysis in complicated samples.

Dark Matter Search Results from the PandaX-4T Commissioning Run.

We report the first dark matter search results using the commissioning data from PandaX-4T. Using a time projection chamber with 3.7 tonne of liquid xenon target and an exposure of 0.63 tonne·year, 1058 candidate events are identified within an approximate nuclear recoil energy window between 5 and 100 keV. No significant excess over background is observed. Our data set a stringent limit to the dark matter-nucleon spin-independent interactions, with a lowest excluded cross section (90% C.L.) of 3.8×10^{-47} cm^{2} at a dark matter mass of 40 GeV/c^{2}.

Improving cellulases production by Myceliophthora thermophila through disruption of protease genes.

OBJECTIVE: To identify main protease genes for the proteolytic degradation of cellulases in M. thermophila and generate a lower-proteases fungal host that can be used for further metabolic engineering to increase cellulase production and heterologous protein expression. RESULTS: Systematic transcriptomic analysis were conducted on the expression of proteases genes in M. thermophila genome and five highly expressed genes encoding extracellular proteases were selected for mutation analyses. A series of single- and multi-gene mutants of these five selected genes was constructed using the CRISPR-Cas9 technique. Compared with WT, the ΔMtalp1 and the quintuple mutant showed significantly lower protease activity (decreased 52.7% and 58.4%, respectively) and at least double enhanced cellulase production. CONCLUSIONS: The results indicated that Mtalp1 is a critical protease gene in cellulase degradation in M. thermophila and disruption of protease genes showed significantly decreased protease activity and obviously enhanced cellulase production in the fermentation broth of ΔMtalp1 and the quintuple mutant.

Construction of a new thermophilic fungus Myceliophthora thermophila platform for enzyme production using a versatile 2A peptide strategy combined with efficient CRISPR-Cas9 system.

OBJECTIVE: To construct a new thermophilic platform for glucoamylase production through 2A peptide strategy combined with CRISPR-Cas9 system using Myceliophthora thermophila as host, thermophilic filamentous fungus with industrial attractiveness to produce enzymes and chemicals from biomass. RESULTS: We adapted the viral 2A peptide approach for M. thermophila and constructed a bicistronic vector for co-expressing two heterologous genes MhglaA and egfp. We obtained positive transformants OE-MhglaA-gfp overexpressing MhGlaA-9 ×His-2A-eGFP through convenient fluorescence screening, western blotting and RT-qPCR. We purified and characterized the recombinant MhGlaA, which exhibited stability in a broader pH range of 3.0-9.0 and thermostable stability at 65 °C, suggesting its potential industrial application. Furthermore, to improve glucoamylase secretion, we genetically engineered the obtained strain OE-MhglaA-gfp through our efficient CRISPR/Cas9 system and generated the quintuple mutant OE-MhglaA-gfpOE-amyRΔalp-1Δres-1Δcre-1, in which protein productivity and amylase activity were increased by approximately 12.0- and 8.2-fold compared with WT. CONCLUSIONS: The 2A peptide approach worked well in M. thermophila and can be used to heterologously co-express two different proteins, and thus in combination with efficient CRISPR-Cas system will accelerate establishing hyper-secretion platforms for biotechnological applications.

Preparation and Evaluation of mPEG-PLGA Block Copolymer Micelles Loaded with a Sarsasapogenin Derivative.

Sarsasapogenin derivative 5n (SGD 5n) is a new compound with potent antitumor efficacy, but the low solubility severely affects its absorption and bioavailability. Therefore, the SGD 5n-loaded mPEG-PLGA block copolymer micelles were developed to improve the value of SGD 5n in clinical application. The polymeric micelles were prepared by an organic solvent evaporation method, and the encapsulation efficiency (EE), drug loading (DL), critical micelle concentrations (CMC), morphology, particle size, and zeta potential were determined. The cytotoxicity was examined by the MTT assay, and the cellular uptake study was performed by confocal laser scanning microscopy. A model of tumor-bearing mouse was established to study the antitumor activity in vivo. The results demonstrated that the particle size of the prepared micelle was 124.6 ± 9.6 nm, the encapsulation efficiency was 82.0 ± 2.9%, and the drug loading was 8.3 ± 0.4%. The results of cytotoxicity and cellular uptake demonstrated that the SGD 5n-loaded micelles could efficiently enter tumor cells, and the cellular uptake of SGD 5n presented concentration and time dependence. This study demonstrated that the prepared SGD 5n-loaded polymeric micelles had significant antitumor activity and provided a basis for clinical development of new compound SGD 5n.

Flexibility of 3D Extruded Printing for a Novel Controlled-Release Puerarin Gastric Floating Tablet: Design of Internal Structure.

The objective of this study was to investigate the development of a novel puerarin gastric floating system with a concentric annular internal pattern by a 3D extrusion-based printing technique and to explore the flexibility of turning the release behavior through the design of the internal structure. The composition consisted of the conventional sustained-release pharmaceutical excipients without addition of foaming agent or light materials. First, the proper alcohol/water proportion was selected for the binding agent. The desired drug release behaviors and good floating properties were obtained either through modification of the formulation composition or adjustment of the internal structure. In vitro, the printed tablets were evaluated for drug release, mechanical properties, lag time, and floating duration time. The in vivo behaviors of the formulations were noted at certain time intervals through assessment of the radiographic pictures of healthy volunteers. The gastric retention time in the 3D-printed tablet was approximately 6 h in vivo. Results indicated these puerarin gastric floating 3D-printed tablets had great potential to achieve good gastric residence time and controlled release. Therefore, 3D extrusion-based printing appears to be appropriate for the production of oral administration systems, owing to its flexibility and the great floating ability and controlled-release capacity of its products.

Disruption of gul-1 decreased the culture viscosity and improved protein secretion in the filamentous fungus Neurospora crassa.

BACKGROUND: The cellulolytic fungus Neurospora crassa is considered a potential host for enzyme and bioethanol production. However, large scale applications are hindered by its filamentous growth. Although previous investigations have shown that mycelial morphology in submerged culture can be controlled by altering physical factors, there is little knowledge available about the potential for morphology control by genetic modification. RESULTS: In this study, we screened morphological mutants in the filamentous fungus N. crassa. Of the 90 morphological mutants screened, 14 mutants exhibited considerably higher viscosity compared with that of the wild type strain, and only two mutants showed low-viscosity morphologies in submerged culture. We observed that disruption of gul-1 (NCU01197), which encodes an mRNA binding protein involved in cell wall remodeling, caused pellet formation as the fermentation progressed, and resulted in the most significant decrease in viscosity of culture broth. Moreover, over-expression of gul-1 caused dramatically increased viscosity, suggesting that the gul-1 had an important function in mycelial morphology during submerged cultivation. Transcriptional profiling showed that expression of genes encoding eight GPI-anchored cell wall proteins was lowered in Δgul-1 while expression of genes associated with two non-anchored cell wall proteins was elevated. Meanwhile, the expression levels of two hydrophobin genes were also significantly altered. These results suggested that GUL-1 affected the transcription of cell wall-related genes, thereby influencing cell wall structure and mycelial morphology. Additionally, the deletion of gul-1 caused increased protein secretion, probably due to a defect in cell wall integrity, suggesting this as an alternative strategy of strain improvement for enzyme production. To confirm practical applications, deletion of gul-1 in the hyper-cellulase producing strain (∆ncw-1∆Ncap3m) significantly reduced the viscosity of culture broth. CONCLUSIONS: Using the model filamentous fungus N. crassa, genes that affect mycelial morphology in submerged culture were explored through systematic screening of morphological mutants. Disrupting several candidate genes altered viscosities in submerged culture. This work provides an example for controlling fungal morphology in submerged fermentation by genetic engineering, and will be beneficial for industrial fungal strain improvement.

Solar spectrum matching with white OLED and monochromatic LEDs.

In this paper, the solar spectrum matching in the visible range of 380-780 nm with white organic light-emitting diode (OLED) and monochromatic light-emitting diodes (LEDs) is investigated. The correlation index (R2) is used to evaluate the difference between the matching spectrum and the solar spectrum. The optimal combination is obtained by the least squares method. We also perform subtraction experiments to find the optimal combination. We utilize a common white OLED device design and just change the species of monochromatic LEDs used. We report and evaluate different degrees of matching effects. The results show that the correlation index of the best combination can reach 94.09% with white OLED and 36 monochromatic LEDs. We define three levels of performance as an evaluation system in accordance with the matching effect. The level is excellent with an R2 above 90.14%. The good level is from 86.65% to 58.28%. From 42.08% to 33.06% is the reasonable level. Compared with other methods, using white OLED combined with monochromatic LEDs achieves the best solar spectrum matching effect. The results can be applied to different requirements of engineering practice.

Disruption of non-anchored cell wall protein NCW-1 promotes cellulase production by increasing cellobiose uptake in Neurospora crassa.

OBJECTIVES: To elucidate the mechanism of cellulase signal transduction in filamentous fungi including the components of the cellulase induction pathway. RESULTS: Neurospora crassa ncw-1 encodes a non-anchored cell wall protein. The absence of ncw-1 increased cellulase gene expression and this is not due to relieving carbon catabolite repression mediated by the cre-1 pathway. A mutant lacking genes encoding both three major ß-glucosidase enzymes and NCW-1 (Δ3ßGΔncw-1) was constructed. Transcriptome analysis of the quadruple mutant demonstrated enhanced expression of cellodextrin transporters after ncw-1 deletion, indicating that ncw-1 affects cellulase expression and production by inhibiting the uptake of the cellodextrin. CONCLUSIONS: NCW-1 is a novel component that plays a critical role in the cellulase induction signaling pathway.

Heterologous expression of a GH3 ß-glucosidase from Neurospora crassa in Pichia pastoris with high purity and its application in the hydrolysis of soybean isoflavone glycosides.

Previous studies have shown isoflavone aglycones to have more biological effects than their counterparts, isoflavone glycones. Some ß-glucosidases can hydrolyze isoflavone glucosides to release aglycones, and discovery of these has attracted great interest. A glycoside hydrolase (GH) family 3 ß-glucosidase (bgl2) gene from Neurospora crassa was heterologously expressed in Pichia pastoris with high purity. The recombinant BGL2 enzyme displayed its highest activity at pH 5.0 and 60 °C, and had its maximum activity against p-nitrophenyl-ß-d-glucopyranoside (pNPG) (143.27 ± 4.79 U/mg), followed by cellobiose (74.99 ± 0.78 U/mg), gentiobiose (47.55 ± 0.15 U/mg), p-nitrophenyl-ß-d-cellobioside (pNPC) (40.07 ± 0.87 U/mg), cellotriose (12.31 ± 0.36 U/mg) and cellotetraose (9.04 ± 0.14 U/mg). The kinetic parameters of Km and Vmax were 0.21 ± 0.01 mM and 147.93 ± 2.77 µM/mg/min for pNPG. The purified enzyme showed a heightened ability to convert the major soybean isoflavone glycosides (daidzin, genistin and glycitin) into their corresponding aglycone forms (daidzien, genistein and glycitein). With this activity against soybean isoflavone glycosides, BGL2 shows great potential for applications in the food, animal feed, and pharmaceutical industries.

Unveiling equal importance of two 14-3-3 proteins for morphogenesis, conidiation, stress tolerance and virulence of an insect pathogen.

Two conserved 14-3-3 proteins orthologous to Saccharomyces cerevisiae Bmh1/2 are poorly understood in filamentous fungi. Here we show that Bmh1 and Bmh2 contribute equally to the fundamental biology and physiology of Beauveria bassiana by targeting many sets of proteins/enzymes. Single Bmh deletion caused similar upregulation of another. Excellent knockdown (∼91%) expressions of Bmh1 in ΔBmh2 and Bmh2 in ΔBmh1 resulted in equally more severe multiphenotypic defects than the single deletions, including G2 /M transition, blastospore size, carbon/nitrogen utilization, conidiation, germination and conidial tolerances to high osmolarity, oxidation, cell wall stress, high temperature and UV-B irradiation. All the deletion and deletion/knockdown mutants showed similar defects in blastospore yield and density, hyphal septation and cell size, hyphal responses to most chemical stresses and virulence. All the defects were evident with altered transcripts of phenotype-related genes and well restored by each Bmh complementation. Our Bmh1- and Bmh2-specific transcriptomes generated under osmotic and oxidative stresses revealed up to 6% genes differentially expressed by at least twofold in the fungal genome. Many of those were greatly depressed or co-depressed in ΔBmh1 and ΔBmh2. Our findings provide a thorough insight into the functions and complementary effects of the two 14-3-3 proteins in the filamentous entomopathogen.

Development of genetic tools for Myceliophthora thermophila.

BACKGROUND: The thermophilic filamentous fungus Myceliophthora thermophila has many suitable characteristics for industrial biotechnology and could be a promising new chassis system for synthetic biology, particularly the ATCC 42464 strain, whose genome was sequenced in 2011. However, metabolic engineering of this strain using genetic approaches has not been reported owing to a lack of genetic tools for this organism. RESULTS: In the present study, we developed a high efficiency Agrobacterium tumefaciens mediated transformation system for M. thermophila, including an approach for targeted gene deletion using green fluorescence protein (GFP) as a marker for selection. Up to 145 transformants per 10(5) conidia were obtained in one transformation plate. Moreover, a ku70 deletion mutant was constructed in the ATCC 42464 background using the tools developed in present study and subsequently characterized. The ku70 deletion construct was designed using resistance to phosphinothricin as the selection marker. Additionally, a GFP-encoding cassette was incorporated that allowed for the selection of site-specific (no fluorescence) or ectopic (fluorescence) integration of the ku70 construct. Transformants with ectopically integrated ku70 deletion constructs were therefore identified using the fluorescent signal of GFP. PCR and Southern blotting analyses of non-fluorescent putative ku70 deletion transformants revealed all 11 tested transformants to be correct deletions. The deletion frequency in a pool of 116 transformants analyzed was 58 %. Moreover, the homologous rate improved about 3 folds under ku70 mutant using the pyrG as a test gene to disrupt in M. thermophila. CONCLUSIONS: We successfully developed an efficient transformation and target gene disruption approach for M. thermophila ATCC 42464 mediated by A. tumefaciens. The tools and the ku70 deletion strain developed here should advance the development of M. thermophila as an industrial host through metabolic engineering and accelerate the elucidation of the mechanism of rapid cellulose degradation in this thermophilic fungus.

Label-free fluorescent DNA biosensors based on metallointercalators and nanomaterials.

DNA based biosensors have become increasingly important in medical diagnostics, genetic and drug screening, and forensics in this post-genomic era. Chemical labeling methods suffer from several drawbacks, which are tedious, cost-expensive and time-consuming, thus the development of simple and general label free strategies is being demanded. The present article introduces a new model of biosensor device based on both metallointercalators and nanomaterials, with the aim of highlighting, in particular, the use of the "label-free" strategy for the construction of simple and inexpensive sensing platforms. In this work, two strategies were developed for designing "label-free" sensors: (1) metallointercalators act as the quencher to nanomaterials; (2) nanomaterials act as the quencher to metallointercalators. These methods take advantage of the sensitive luminescence signal change of metallointercalators or nanomaterials upon analytes binding. By monitoring the luminescence change, we were able to detect metal ions and biomolecules. Compared to other label-free fluorescent methods, these "label-free" DNA biosensors provide fast, simple, economical, sensitive and selective detection of target analytes with specific probes.

Independent metabolism of oligosaccharides is the keystone of synchronous utilization of cellulose and hemicellulose in Myceliophthora.

The effective utilization of cellulose and hemicellulose, the main components of plant biomass, is a key technical obstacle that needs to be overcome for the economic viability of lignocellulosic biorefineries. Here, we firstly demonstrated that the thermophilic cellulolytic fungus Myceliophthora thermophila can simultaneously utilize cellulose and hemicellulose, as evidenced by the independent uptake and intracellular metabolism of cellodextrin and xylodextrin. When plant biomass serviced as carbon source, we detected the cellodextrin and xylodextrin both in cells and in the culture medium, as well as high enzyme activities related to extracellular oligosaccharide formation and intracellular oligosaccharide hydrolysis. Sugar consumption assay revealed that in contrast to inhibitory effect of glucose on xylose and cellodextrin/xylodextrin consumption in mixed-carbon media, cellodextrin and xylodextrin were synchronously utilized in this fungus. Transcriptomic analysis also indicated simultaneous induction of the genes involved in cellodextrin and xylodextrin metabolic pathway, suggesting carbon catabolite repression (CCR) is triggered by extracellular glucose and can be eliminated by the intracellular hydrolysis and metabolism of oligosaccharides. The xylodextrin transporter MtCDT-2 was observed to preferentially transport xylobiose and tolerate high cellobiose concentrations, which helps to bypass the inhibition of xylobiose uptake. Furthermore, the expression of cellulase and hemicellulase genes was independently induced by their corresponding inducers, which enabled this strain to synchronously utilize cellulose and hemicellulose. Taken together, the data presented herein will further elucidate the degradation of plant biomass by fungi, with implications for the development of consolidated bioprocessing-based lignocellulosic biorefinery.