Targeting MFGE8 secreted by cancer-associated fibroblasts blocks angiogenesis and metastasis in esophageal squamous cell carcinoma.

Cancer-associated fibroblasts (CAFs) play vital roles in establishing a suitable tumor microenvironment. In this study, RNA sequencing data revealed that CAFs could promote cell proliferation, angiogenesis, and ECM reconstitution by binding to integrin families and activating PI3K/AKT pathways in esophageal squamous cell carcinoma (ESCC). The secretions of CAFs play an important role in regulating these biological activities. Among these secretions, we found that MFGE8 is specifically secreted by CAFs in ESCC. Additionally, the secreted MFGE8 protein is essential in CAF-regulated vascularization, tumor proliferation, drug resistance, and metastasis. By binding to Integrin αVß3/αVß5 receptors, MFGE8 promotes tumor progression by activating both the PI3K/AKT and ERK/AKT pathways. Interestingly, the biological function of MFGE8 secreted by CAFs fully demonstrated the major role of CAFs in ESCC and its mode of mechanism, showing that MFGE8 could be a driver factor of CAFs in remodeling the tumor environment. In vivo treatment targeting CAFs-secreting MFGE8 or its receptor produced significant inhibitory effects on ESCC growth and metastasis, which provides an approach for the treatment of ESCC.

Synchronous Elimination of Excess Photoinstable PbI2 and Interfacial Band Mismatch for Efficient and Stable Perovskite Solar Cells.

Eliminating the undesired photoinstability of excess lead iodide (PbI2 ) in the perovskite film and reducing the energy mismatch between the perovskite layer and heterogeneous interfaces are urgent issues to be addressed in the preparation of perovskite solar cells (PVSCs) by two-step sequential deposition method. Here, the 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF4 ) is employed to convert superfluous PbI2 to more robust 1D EMIMPbI3 which can withstand lattice strain, while forming an interfacial dipole layer at the SnO2 /perovskite interface to reconfigure the interfacial energy band structure and accelerate the charge extraction. Consequently, the unencapsulated PVSCs device attains a champion efficiency of 24.28 % with one of the highest open-circuit voltage (1.19 V). Moreover, the unencapsulated devices showcase significantly improved thermal stability, enhanced environmental stability and remarkable operational stability accompanied by 85 % of primitive efficiency retained over 1500 h at maximum power point tracking under continuous illumination.

Amine-releasable Mediator In situ Repair Perovskites for Efficient and Stable Perovskite Solar Cells.

Residual lead iodide (PbI2) is deemed to a double-edged sword in perovskite film as small amounts of PbI2 are beneficial to the photovoltaic performance, but excessive will cause degradation of photovoltaic performance and stability. Herein, an in situ repair strategy has been developed by introducing amine-releasable mediator (methylammonium pyridine-2-carboxylic, MAPyA) to eliminate over-residual PbI2 and regulate the crystal quality of perovskite film. Notably, MAPyA can be partially decomposed into methylamine (MA) gas and pyridine-2-carboxylic (PyA) during high temperature annealing. The released MA can locally form liquid intermediate phase, facilitating the reconstruction of perovskite microcrystals and residual PbI2. Moreover, the leftover PyA is confirmed to effectively passivate the uncoordinated lead ions in final perovskite film. Based upon this, superior perovskite film with optimized crystal structure and holistic negligible PbI2 is acquired. The assembled device realizes outstanding efficiency of 24.06 %, and exhibits a remarkable operational stability that maintaining 87 % of its origin efficiency after continuous illumination for 1480 h. And the unencapsulated MAPyA-treated devices present significant uplift in humidity stability (maintaining ~93 % of the initial efficiency over 1500 h, 50-60 % relative humidity). Furthermore, the further optimization of this strategy with nanoimprint technology proves its superiority in the amplificative preparation for perovskite films.

Development and validation of a gene model predicting lymph node metastasis and prognosis of oral squamous cell carcinoma based on single-cell and bulk RNA-seq analysis.

BACKGROUND: Lymph node metastasis can independently predict oral squamous cell carcinoma patients' survival. This study would investigate the genetic and cellular differences between oral squamous cell carcinoma with positive and negative lymph node metastases. METHODS: We gathered single-cell RNA sequencing and bulk gene expression data from the Cancer Genome Atlas and Gene Expression Omnibus databases. Sixty lymph node-metastasis-related genes were discovered with refined single-cell RNA sequencing data analysis, and consensus clustering provided three molecular subtypes of oral squamous cell carcinoma. Least absolute shrinkage and selection operator analyses were then utilized to establish a five-gene risk model. CIBERSORT analysis revealed the immune infiltration profile of different risk subgroups. RESULTS: Oral squamous cell carcinoma patients were classified into three subtypes based on the 60 lymph node-metastasis-related key genes identified by single-cell RNA sequencing data. Patients in Subtype 3 showed a tendency for lymph node metastasis and poorer prognosis. Moreover, five biomarkers were selected from the 60 genes to construct a five-gene risk model evaluating the risk of lymph node metastasis. A lower probability of lymph node metastasis and a better prognosis was observed in the low-risk group. The immune infiltration of three different risk groups was explored with CIBERSORT. Besides, further analysis implied different sensitivities of anticancer drugs, including immunotherapy drugs and targeted compounds, in the three risk groups. CONCLUSION: In view of intratumoral heterogeneity, we found 60 genes associated with lymph node metastasis of oral squamous cell carcinoma. Subsequently, we constructed a five-gene signature that could improve the prediction of lymph node metastasis, clinical outcome, and promote individualized treatment strategies for oral squamous cell carcinoma.

Monodisperse Adducts-Induced Homogeneous Nucleation Towards High-Quality Tin-Based Perovskite Film.

The classic solvent system can't sufficiently separate one-dimensional edge-sharing SnI2 crystals in solution, which severely restricts the fabrication of high-quality tin-based perovskite film. Herein, a strong Lewis base (hexamethylphosphoramide, HMPA) has been introduced to coordinate Sn2+ to modulate solvation behaviours on perovskite precursor and regulate crystallization kinetics. The large molecular volume of HMPA and stronger bind energy of SnI2 ⋅ 2HMPA (-0.595 eV vs -0.118 eV for SnI2 ⋅ 2DMSO) change the solvation structure of SnI2 from edge-sharing cluster to monodisperse adduct, which contributes to uniform nucleation sites and prolongs crystal growth process. Delightfully, a fully-covered perovskite film is formed on the large-area substrate and tin-based perovskite solar cells processed with HMPA exhibit an excellent efficiency of 13.46 %. This research provides novel insights and directions for the solution preparation of smooth and uniform large-area tin-based perovskite film.

Different clinicopathologic features predispose to different patterns of distant metastasis with heterogeneous short-term prognosis in patients with differentiated thyroid cancer.

BACKGROUND: Limited studies have focused on the associated clinicopathologic features and short-term prognostic impacts of metastatic patterns at initial diagnosis in differentiated thyroid cancer (DTC). METHODS: Overall, 530 individuals with distant DTC diagnosed between 2010 and 2014 were identified from Surveillance, Epidemiology, and End Results (SEER) database. Multinomial logistic regression model was used to assess the clinicopathologic factors influencing the pattern of distant metastasis. Kaplan-Meier method and multivariable Cox regression were used to estimate the short-term effects of metastatic patterns on overall (OS) and thyroid cancer-specific survival (TCSS). RESULTS: Fifty, 111, 263, 59 and 47 patients presented with distant lymph node (LN)-only, bone-only, lung-only, bone plus lung, and liver and/or brain metastases (Mets), respectively. Regional lymph node metastasis (LNM) and follicular histotype were the only confirmed risk factors for distant LN-only Mets and bone-only Mets, respectively. Larger tumour size, extrathyroidal extension (ETE) and papillary histotype were associated with lung-only Mets. Synchronous bone and lung Mets were more likely to occur in older patients. In addition, patients with distant LN-only Mets had hardly any negative effect on OS and TCSS, whereas those with synchronous bone and lung or liver/brain Mets predicted unfavourable short-term outcomes, regardless of whether they received total thyroidectomy and radioisotopes. CONCLUSIONS: Different clinicopathologic factors predispose to different patterns of metastases with profound short-term survival differences among DTC patients. Our findings may help to determine effective pretreatment screening for aggressive metastatic patterns at initial diagnosis, and thus to provide additional treatment or access of clinical trials for these patients.

Diammonium Molecular Configuration-Induced Regulation of Crystal Orientation and Carrier Dynamics for Highly Efficient and Stable 2D/3D Perovskite Solar Cells.

The effects from the molecular configuration of diammonium spacer cations on 2D/3D perovskite properties are still unclear. Here, we investigated systematically the mechanism of molecular configuration-induced regulation of crystallization kinetic and carrier dynamics by employing various diammonium molecules to construct Dion-Jacobson (DJ)-type 2D/3D perovskites to further facilitating the photovoltaic performance. The minimum average Pb-I-Pb angle leads to the smallest octahedral tilting of [PbX6 ]4- lattice in optimal diammonium molecule-incorporated DJ-type 2D/3D perovskite, which enables suitable binding energy and hydrogen-bonding between spacer cations and inorganic [PbX6 ]4- cages, thus contributing to the formation of high-quality perovskite film with vertical crystal orientation, mitigatory lattice distortion and efficient carrier transportation. As a consequence, a dramatically improved device efficiency of 22.68 % is achieved with excellent moisture stability.

Multidentate Chelation Heals Structural Imperfections for Minimized Recombination Loss in Lead-Free Perovskite Solar Cells.

Tin-based perovskite solar cells (Sn-PSCs) have emerged as promising environmentally viable photovoltaic technologies, but still suffer from severe non-radiative recombination loss due to the presence of abundant deep-level defects in the perovskite film and under-optimized carrier dynamics throughout the device. Herein, we healed the structural imperfections of Sn perovskites in an "inside-out" manner by incorporating a new class of biocompatible chelating agent with multidentate claws, namely, 2-Guanidinoacetic acid (GAA), which passivated a variety of deep-level Sn-related and I-related defects, cooperatively reinforced the passivation efficacy, released the lattice strain, improved the structural toughness, and promoted the carrier transport of Sn perovskites. Encouragingly, an efficiency of 13.7 % with a small voltage deficit of ≈0.47 V has been achieved for the GAA-modified Sn-PSCs. GAA modification also extended the lifespan of Sn-PSCs over 1200 hours.

Arms-qPCR Improves Detection Sensitivity of Earlier Diagnosis of Papillary Thyroid Cancers With Worse Prognosis Determined by Coexisting BRAF V600E and Tert Promoter Mutations.

OBJECTIVE: The coexistence of BRAF V600E and the telomerase reverse transcriptase (TERT) promoter mutation C228T/C250T is extensively associated with thyroid cancer prognosis. Our study aimed to establish a sensitive method for mutation detection and explore the correlation in detail. METHODS: The BRAF and TERT promoter mutation status of 250 papillary thyroid cancers was determined using amplification-refractory mutation system quantitative polymerase chain reaction (ARMS-qPCR) and Sanger sequencing to compare the sensitivity of the 2 methods. Associations between the mutation status and clinicopathological features were then analyzed. RESULTS: ARMS-qPCR was more sensitive than Sanger sequencing (BRAF V600E: 75.2% [188 of 250] vs 52.4% [131 of 250], P < .001; TERT promoter C228T/C250T mutation: 12.0% [30 of 250] vs 3.6% [9 of 250], P = .001; comutation: 9.6% [24 of 250] vs 3.2% [8 of 250], P = .005). Both ARMS-qPCR and Sanger sequencing indicated that patients with coexisting BRAF V600E and TERT promoter mutations had an older diagnosis age, higher recurrence rate, and were associated with a more advanced TNM stage and higher metastasis, age, completeness of resection, invasion, and size score. Moreover, ARMS-qPCR helped identify an earlier group stage, which was younger and had smaller tumors and a lower recurrence rate, compared with the group with coexisting BRAF V600E and TERT promoter mutations identified by Sanger sequencing. The newly identified group had a lower metastasis, age, completeness of resection, invasion, and size score and TNM stage. CONCLUSION: Patients with coexisting BRAF V600E and TERT promoter mutations had a worse prognosis. ARMS-qPCR, the more sensitive method, can be used to identify patients who have a potentially worse prognosis earlier.

Stretchable Perovskite Solar Cells with Recoverable Performance.

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light-weight, and low-cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the "Achilles' heel" of optoelectronic and mechanical stability. We incorporate a self-healing polyurethane (s-PU) with dynamic oxime-carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s-PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self-encapsulating structure. Importantly, the self-healing function of the s-PU scaffold was verified in situ. The s-PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.

Silver Mesh Electrodes via Electroless Deposition-Coupled Inkjet-Printing Mask Technology for Flexible Polymer Solar Cells.

The application of metal grids as flexible transparent electrodes (FTEs) in optoelectronic devices is significantly influenced by poor adhesion and thickness difference between the metal and the substrate, resistance distribution uniformity, and a high annealing temperature. Direct inkjet printing of the metal mesh can overcome junction resistance while maintaining high conductivity, but the metal mesh thickness is still unsatisfactory. In addition, inkjet printing of mechanically durable metal FTEs directly on flexible substrates is challenging because of the high-temperature sintering treatment. Electroless deposition is a well-established method for low-cost and large-scale deposition of metal films. Here, ultrathin and ultraflexible Ag mesh@polydopamine (PDA)/poly(ethylene terephthalate) (PET) FTEs were fabricated by integrating inkjet-printed polymer matrices on a PDA-modified flexible PET substrate to form consecutive patterns as a mask and performing subsequent electroless deposition of the Ag mesh. The FTEs exhibit an excellent sheet resistance (Rs) of 9 Ω/sq with 89.9% transmittance. The resultant polymer solar cells show a superior power conversion efficiency (PCE) of 10.24% with 1 cm2 area and feature excellent flexural endurance (81% of initial PCE after 1500 bending cycles) and operational reliability (83% of initial PCE after 30 days). This ecofriendly and large-area fabrication technique has potential for future commercial applications of wearable electronics.

3-Dimensional ZnO/CdS nanocomposite with high mobility as an efficient electron transport layer for inverted polymer solar cells.

The inclusions of solution-processed ZnO electron transport layers (ETLs) of inverted polymer solar cells can lead to various surface defects, which can act as interfacial recombination centers for photogenerated charges and thereby can lead to degradation of the device performance. Three-dimensional (3D) CdS with different morphologies, such as flower-like CdS (F-CdS), branched CdS (B-CdS), and spherical CdS (S-CdS), are synthesized to modify ZnO ETLs, by effectively removing the intragap states of the ZnO nanocrystal films by forming ZnO/F-CdS, ZnO/B-CdS, and ZnO/S-CdS composite ETLs, respectively. Moreover, ZnO/CdS possesses higher electron mobility and provides a larger interface between the ETL and active layer, which is beneficial for enhancing the power conversion efficiency (PCE) of the inverted organic solar cells. In particular, a device based on a ZnO/S-CdS ETL and thieno[3,4-b]-thiophene/benzodithiophene (PTB7):[6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) active layer achieved a PCE of 8.0%, together with better long-term stability.

Alternative alcohol-soluble conjugated small molecule electrolytes for high-efficiency inverted polymer solar cells.

New alcohol-soluble conjugated small molecule electrolytes (CSMEs), 3,6-bis-(5-benzoic acid-thiophen-2-yl)-2,5-bis-(2-ethylhexyl)-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione liquid crystalline (DPP-COOH) and di-tetrabutylammonium cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)ruthenium(II) dye (N719), are developed as interfacial modification in inverted polymer solar cells (PSCs). Further optimization of the device architecture by combining the electrolytes as hole and electron buffer layers can significantly promote the photovoltaic performances of PSCs due to the integrated advantages of excellent alcohol processability, hole and electron mobility, interfacial dipole effect and good energy level alignment with electrodes. Moreover, the PSCs with the CSMEs interlayers based on narrow band-gap PTB7:PC71BM active layers show considerable improvement in power conversion efficiency (PCE), compared with P3HT:PCBM active layer-based devices. Devices with DPP-COOH and N719 modifications after thermal treatment at 120 °C exhibit the PCE of 8.0% and 7.6% under AM 1.5G irradiation, respectively, improving from 6.7% PCE of the pristine device without any interfacial layer. Encouragingly, the simultaneous use of CSMEs as hole and electron modification layers can boost the PCE to 8.2%. These findings demonstrate that the utilization of alcohol-soluble small molecule conjugated electrolytes with lower band gaps as interfacial modification layers is an effective and practical strategy for improving photovoltaic performance in PSCs.

A comprehensive study of sulfonated carbon materials as conductive composites for polymer solar cells.

Sulfonated carbon nanotubes (S-CNTs) and sulfonated graphene (S-Gra) with superior dispersibility were successfully prepared to modify poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) for applications in polymer solar cells (PSCs). The synergetic effect between S-CNTs/S-Gra and PEDOT:PSS could remove excess insulating PSS chains leading to an obvious phase separation between the PEDOT and PSS chains, which allows the formation of more conductive PEDOT channels. The PEDOT:PSS (Clevios PH 4083):S-CNTs with well-matched work function, favorable morphology, optimized hydrophobicity and superior hole mobility is demonstrated to be an excellent hole transport layer (HTL) for PSCs. However, the PEDOT:PSS (Clevios PH 4083) modified by sulfonated graphene with stacked and wrinkled lamellae as an HTL renders a rough morphology and has a negative impact on the morphology of the active layer, consequently resulting in a poor device performance. Excitingly, PEDOT:PSS (Clevios PH 1000) modified with S-Gra shows high conductivity, because the sulfonated graphene lamellae contribute to the connection between the insulator and conductive PEDOT islands and improves the charge conduction. The PH1000:S-Gra with multiple layers presents excellent electrical conductive properties and a high transmittance (sheet resistance of ∼45 Ω sq(-1) and transmittance of ∼85.5% at 550 nm), which possess great potential for its application as a transparent conductive and flexible electrode in organic electronics.

Performance enhancement of bulk heterojunction solar cells with direct growth of CdS-cluster-decorated graphene nanosheets.

Two-dimensional graphene-CdS (G-CdS) semiconductor hybrid nanosheets were synthesized in situ by graphene oxide (GO) quantum wells and a metal-xanthate precursor through a one-step growth process. Incorporation of G-CdS nanosheets into a photoactive film consisting of poly[4,8-bis-(2-ethyl-hexyl-thiophene-5-yl)-benzo[1,2-b:4,5-b]dithiophene-2,6-diyl]-alt-[2-(2-ethyl-hexanoyl)-thieno[3,4-b]thiophen-4,6-diyl] (PBDTTT-C-T) and [6,6]-phenyl C70 butyric acid methyl ester (PC70 BM) effectively decreases the exciton lifetime to accelerate exciton dissociation. More importantly, the decreasing energy levels of PBDTTT-C-T, PC70 BM, and G-CdS produces versatile heterojunction interfaces of PBDTTT-C-T:PC70 BM, PBDTTT-C-T:G-CdS, and PBDTTT-C-T:PC70 BM:G-CdS; this offers multi-charge-transfer channels for more efficient charge separation and transfer. The charge transfer in the blend film also depends on the G-CdS nanosheet loadings. In addition, G-CdS nanosheets improve light utilization and charge mobility in the photoactive layer. As a result, by incorporation of G-CdS nanosheets into the active layer, the power-conversion efficiency of inverted solar cells based on PBDTTT-C-T and PC71 BM is improved from 6.0 % for a reference device without G-CdS nanosheets to 7.5 % for the device with 1.5wt % G-CdS nanosheets, due to the dramatically enhanced short-circuit current. Combined with the advantageous mechanical properties of the PBDTTT-C-T:PC70 BM:G-CdS active layer, the novel CdS-cluster-decorated graphene hybrid nanomaterials provide a promising approach to improve the device performance.

Achieving Desired Pseudo-Planar Heterojunction Organic Solar Cells via Binary-Dilution Strategy.

The sequential deposition process has demonstrated the great possibility to achieve a photolayer architecture with an ideal gradient phase separation morphology, which has a vital influence on the physical processes that determine the performance of organic solar cells (OSCs). However, the controllable preparation of pseudo-planar heterojunction (P-PHJ) with gradient distribution has not been effectively elucidated. Herein, a binary-dilution strategy is proposed, the PM6 solution with micro acceptor BO-4Cl and the L8-BO solution with micro donor PM6 respectively, to form P-PHJ film. This architecture exists good donor (D) and acceptor (A) vertical gradient distribution and larger D/A interpenetrating regions, which promotes exciton generation and dissociation, shortens charge transport distance and optimizes carrier dynamics. Moreover, the dilution of PM6 by BO-4Cl promotes the regulation of active layer aggregation size and phase purity, thus alleviating energy disorder and voltage loss. As a result, the P-PHJ device exhibits an outstanding power conversion efficiency of 19.32% with an excellent short-circuit current density of 26.92 mA cm-2 , much higher than planar binary heterojunction (17.67%) and ternary bulk heterojunction (18.49%) devices. This research proves a simple but effective method to provide an avenue for constructing desirable active layer morphology and high-performance OSCs.

A distinct tumor microenvironment makes anaplastic thyroid cancer more lethal but immunotherapy sensitive than papillary thyroid cancer.

Both anaplastic thyroid cancer (ATC) and papillary thyroid cancer (PTC) originate from thyroid follicular epithelial cells, but ATC has a significantly worse prognosis and shows resistance to conventional therapies. However, clinical trials found that immunotherapy works better in ATC than late-stage PTC. Here, we used single-cell RNA sequencing (scRNA-Seq) to generate a single-cell atlas of thyroid cancer. Differences in ATC and PTC tumor microenvironment components (including malignant cells, stromal cells, and immune cells) leading to the polarized prognoses were identified. Intriguingly, we found that CXCL13+ T lymphocytes were enriched in ATC samples and might promote the development of early tertiary lymphoid structure (TLS). Last, murine experiments and scRNA-Seq analysis of a treated patient's tumor demonstrated that famitinib plus anti-PD-1 antibody could advance TLS in thyroid cancer. We displayed the cellular landscape of ATC and PTC, finding that CXCL13+ T cells and early TLS might make ATC more sensitive to immunotherapy.

Synchronous papillary and follicular thyroid carcinomas: the first retrospective cohort study and literature review.

Background: Papillary thyroid carcinoma (PTC) and follicular thyroid carcinoma (FTC) contribute to more than 95% of thyroid malignancies. However, synchronous PTC and FTC are less common; it is most commonly discovered incidentally as synchronous malignancies during operation, which adds difficulties to intraoperative decision-making and postoperative treatment. Therefore, we analyzed the clinicopathological characteristics and prognosis of patients with PTC and FTC in our center. Methods: We conducted a search of single PTC, single FTC, and synchronous PTC/FTC patients who received initial surgery treatment at Fudan University Shanghai Cancer Center from 2006 to 2018 and collected paraffin-embedded samples of synchronous patients. Clinicopathological characteristics were collected from the electronic medical record system. Follow-up was performed through telephone contact or medical records. Exome sequencing was performed by ThyroLead panel. Results: Total of 42 synchronous PTC/FTC patients, 244 single FTC patients, and 2,959 single PTC patients were included. It showed a similarity between the clinicopathological features of synchronous thyroid cancer patients and single PTC patients, with a greater proportion of females, higher probabilities of lymph node metastasis, and higher rate of concurrence of Hashimoto's disease. The disease-free survival (DFS) curve indicated a worse prognosis of the synchronous group and single PTC group compared to the single FTC group, who had a propensity for neck lymph node recurrence; however, logistic multivariate regression analysis did not find any factor related to recurrence in the synchronous group. After re-checking pathology, DNA extraction, and quality control, genetic alteration information of 62 samples including primary tumors and metastatic lymph nodes from 35 synchronous cancer patients was displayed. In total, 81 mutations and 1 fusion gene were identified, including mutations related to outcomes and targeted therapy. Besides, some rare mutations in thyroid cancer were found in these patients. Conclusions: To conclude, synchronous PTC/FTC tend to be incidentally discovered during or after operation, behaving more like single PTC. The prognosis of synchronous patients is worse than that of single FTC patients and supplemental cervical lymph node dissection, total thyroidectomy, and postoperative radioiodine therapy should be taken into consideration after diagnosis. The next-generation sequencing (NGS) showed a unique molecular feature of synchronous patients with some rare mutations.

Cancer stem cells: Recent insights and therapies.

Tumors are intricate ecosystems containing malignant components that generate adaptive and evolutionarily driven abnormal tissues. Through self-renewal and differentiation, cancers are reconstructed by a dynamic subset of stem-like cells that enforce tumor heterogeneity and remodel the tumor microenvironment (TME). Through recent technology advances, we are now better equipped to investigate the fundamental role of cancer stem cells (CSCs) in cancer biology. In this review, we discuss the latest insights into characteristics, markers and mechanism of CSCs and describe the crosstalk between CSCs and other cells in TME. Additionally, we explore the performance of single-cell sequencing and spatial transcriptome analysis in CSCs studies and summarize the therapeutic strategies to eliminate CSCs, which could broaden the understanding of CSCs and exploit for therapeutic benefit.

Inhibition of Ion Migration for Highly Efficient and Stable Perovskite Solar Cells.

In recent years, organic-inorganic halide perovskites are now emerging as the most attractive alternatives for next-generation photovoltaic devices, due to their excellent optoelectronic characteristics and low manufacturing cost. However, the resultant perovskite solar cells (PVSCs) are intrinsically unstable owing to ion migration, which severely impedes performance enhancement, even with device encapsulation. There is no doubt that the investigation of ion migration and the summarization of recent advances in inhibition strategies are necessary to develop "state-of-the-art" PVSCs with high intrinsic stability for accelerated commercialization. This review systematically elaborates on the generation and fundamental mechanisms of ion migration in PVSCs, the impact of ion migration on hysteresis, phase segregation, and operational stability, and the characterizations for ion migration in PVSCs. Then, many related works on the strategies for inhibiting ion migration toward highly efficient and stable PVSCs are summarized. Finally, the perspectives on the current obstacles and prospective strategies for inhibition of ion migration in PVSCs to boost operational stability and meet all of the requirements for commercialization success are summarized.