Correlation between the Stability of Substituted Cobaltocenium and Molecular Descriptors.

Metallocenium cations, used as a component in an anion exchange membrane of a fuel cell, demonstrate excellent thermal and alkaline stability, which can be improved by the chemical modification of the cyclopentadienyl rings with substituent groups. In this work, the relation between the bond dissociation energy (BDE) of the cobaltocenium (CoCp2+) derivatives, used as a measure of the cation stability, and chemistry-informed descriptors obtained from the electronic structural calculations is established. The analysis of 12 molecular descriptors for 118 derivatives reveals a nonlinear dependence of the BDE on the electron donating-withdrawing character of the substituent groups coupled to the energy of the frontier molecular orbitals. A chemistry-informed feed-forward neural network trained using k-fold cross-validation over the modest data set is able to predict the BDE from the molecular descriptors with the mean absolute error of about 1 kcal/mol. The theoretical analysis suggests some promising modifications of cobaltocenium for experimental research. The results demonstrate that even for modest data sets the incorporation of the chemistry knowledge into the neural network architecture, e.g., through mindful selection and screening of the descriptors and their interactions, paves the way to gain new insight into molecular properties.

Mechanochemistry of Cationic Cobaltocenium Mechanophore.

Recent research on the mechanochemistry of metallocene mechanophores has shed light on the force-responsiveness of these thermally and chemically stable organometallic compounds. In this work, we report a combination of experimental and computational studies on the mechanochemistry of main-chain cobaltocenium-containing polymers. Ester derivatives of the cationic cobaltocenium, though isoelectronic to neutral ferrocene, are unstable in the nonmechanical control experimental conditions that were accommodated by their ferrocene analogs. Replacing the electron withdrawing C-ester linkages with electron-donating C-alkyls conferred the necessary stability and enabled the mechanochemistry of the cobaltocenium to be assessed. Despite their high bond dissociation energy, cobaltocenium mechanophores are found to be selective sites of main chain scission under sonomechanical activation. Computational CoGEF calculations suggest that the presence of a counterion to cobaltocenium plays a vital role by promoting a peeling mechanism of dissociation in conjunction with the initial slipping.

Rational Synthesis of Metallo-Cations Toward Redox- and Alkaline-Stable Metallo-Polyelectrolytes.

Cations are crucial components in emerging functional polyelectrolytes for a myriad of applications. Rapid development in this area necessitates the exploration of new cations with advanced properties. Herein we describe a combination of computational and experimental design of cobaltocene metallo-cations that have distinct electronic and redox properties. One of the direct outcomes on the first synthesis of a complete set of cation derivatives is to discover highly stable cations, which are further integrated to construct metallo-polyelectrolytes as anion-exchange membranes in solid-state alkaline fuel cells. The device performance of these polyelectrolytes under highly basic and oxidative environments is competitive with many organo-polyelectrolytes.

Synthesis of Site-specific Charged Metallopolymers via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization.

Site-specific cobaltocenium-labeled polymers are synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization using cobaltocenium-labeled chain transfer agents. These chain transfer agents show counterion-dependent solubility. Based on the chemical structure of the chain transfer agents, single cobaltocenium moieties are dictated to be in predetermined locations at either the center or terminals of the polymer chains. Polymerization of hydrophobic monomers (methyl methacrylate, methyl acrylate and styrene) and hydrophilic monomers (2-(dimethylamino)ethyl methacrylate and methacrylic acid) is demonstrated to follow a controlled manner based on kinetic studies. Cobaltocenium-labeled polymers with molecular weights greater than 100,000 Da can be prepared by using a difunctional chain transfer agent. Photophysical properties, electrochemical properties, thermal properties and morphology of the cobaltocenium-labeled polymers are also investigated.

CD44 deletion leading to attenuation of experimental autoimmune encephalomyelitis results from alterations in gut microbiome in mice.

Dysbiosis in gut microbiome has been shown to be associated with inflammatory and autoimmune diseases. Previous studies from our laboratory demonstrated the pivotal role played by CD44 in the regulation of EAE, a murine model of multiple sclerosis. In the current study, we determined whether these effects resulted from an alteration in gut microbiota and the short-chain fatty acid (SCFA) production in CD44 knockout (CD44KO) mice. Fecal transfer from naïve CD44KO but not C57BL/6 wild type (CD44WT) mice, into EAE-induced CD44WT mice, led to significant amelioration of EAE. High-throughput bacterial 16S rRNA gene sequencing, followed by clustering sequences into operational taxonomic units (OTUs) and biochemical analysis, revealed that EAE-induced CD44KO mice showed significant diversity, richness, and evenness when compared to EAE-induced CD44WT mice at the phylum level, with dominant Bacteroidetes (68.5%) and low Firmicutes (26.8%). Further, data showed a significant change in the abundance of SCFAs, propionic acid, and i-butyric acid in EAE-CD44KO compared to EAE-CD44WT mice. In conclusion, our results demonstrate that the attenuation of EAE seen following CD44 gene deletion in mice may result from alterations in the gut microbiota and SCFAs. Furthermore, our studies also demonstrate that the phenotype of gene knock-out animals may be shaped by gut microbiota.

Sustainable Elastomers from Renewable Biomass.

Sustainable elastomers have undergone explosive growth in recent years, partly due to the resurgence of biobased materials prepared from renewable natural resources. However, mounting challenges still prevail: How can the chemical compositions and macromolecular architectures of sustainable polymers be controlled and broadened? How can their processability and recyclability be enabled? How can they compete with petroleum-based counterparts in both cost and performance? Molecular-biomass-derived polymers, such as polymyrcene, polymenthide, and poly(ε-decalactone), have been employed for constructing thermoplastic elastomers (TPEs). Plant oils are widely used for fabricating thermoset elastomers. We use abundant biomass, such as plant oils, cellulose, rosin acids, and lignin, to develop elastomers covering a wide range of structure-property relationships in the hope of delivering better performance. In this Account, recent progress in preparing monomers and TPEs from biomass is first reviewed. ABA triblock copolymer TPEs were obtained with a soft middle block containing a soybean-oil-based monomer and hard outer blocks containing styrene. In addition, a combination of biobased monomers from rosin acids and soybean oil was formulated to prepare triblock copolymer TPEs. Together with the above-mentioned approaches based on block copolymers, multigraft copolymers with a soft backbone and rigid side chains are recognized as the first-generation and second-generation TPEs, respectively. It has been recently demonstrated that multigraft copolymers with a rigid backbone and elastic side chains can also be used as a novel architecture of TPEs. Natural polymers, such as cellulose and lignin, are utilized as a stiff, macromolecular backbone. Cellulose/lignin graft copolymers with side chains containing a copolymer of methyl methacrylate and butyl acrylate exhibited excellent elastic properties. Cellulose graft copolymers with biomass-derived polymers as side chains were further explored to enhance the overall sustainability. Isoprene polymers were grafted from a cellulosic backbone to afford Cell-g-polyisoprene copolymers. Via cross-linking of these graft copolymers, human-skin-mimic elastomers and high resilient elastomers with a well-defined network structure were achieved. The mechanical properties of these resilient elastomers could be finely controlled by tuning the cellulose content. As isoprene can be produced by engineering of microorganisms, these elastomers could be a renewable alternative to petroleum products. In summary, triblock copolymer and graft copolymer TPEs with biomass components, skin-mimic elastomers, high resilient biobased elastomers, and engineering of macromolecular architectures for elastomers are discussed. These approaches and design provide us knowledge on the potential to make sustainable elastomers for various applications to compete with petroleum-based counterparts.

Charged Metallopolymer-Grafted Silica Nanoparticles for Antimicrobial Applications.

Inappropriate and frequent use of antibiotics has led to the development of antibiotic-resistant bacteria, which cause infectious diseases that are difficult to treat. With the rising threat of antibiotic resistance, the need to develop effective new antimicrobial agents is prominent. We report antimicrobial metallopolymer nanoparticles, which were prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization of a cobaltocenium-containing methacrylate monomer from silica nanoparticles. These particles are capable of forming a complex with ß-lactam antibiotics, such as penicillin, rejuvenating the bactericidal activity of the antibiotic. Disk diffusion assays showed significantly increased antibacterial activities against both Gram-positive and Gram-negative bacteria. The improved efficiencies were attributed to the inhibition of hydrolysis of the ß-lactam antibiotics and enhancement of local antibiotics concentration on a nanoparticle surface. In addition, hemolysis evaluations demonstrated minimal toxicity to red blood cells.

Cationic Metallo-Polyelectrolytes for Robust Alkaline Anion-Exchange Membranes.

Chemically inert, mechanically tough, cationic metallo-polyelectrolytes were conceptualized and designed as durable anion-exchange membranes (AEMs). Ring-opening metathesis polymerization (ROMP) of cobaltocenium-containing cyclooctene with triazole as the only linker group, followed by backbone hydrogenation, led to a new class of AEMs with a polyethylene-like framework and alkaline-stable cobaltocenium cation for ion transport. These AEMs exhibited excellent thermal, chemical and mechanical stability, as well as high ion conductivity.

A biomass approach to mendable bio-elastomers.

Sustainable bioelastomers with high elastic recovery, high resilience and mendability are conceptualized with low chain-entanglement polymers that are predominantly originated from renewable biomass. Polymers with plant oil-derived fatty groups at the side chain were installed with furan, which allowed Diels-Alder addition to introduce dynamic covalent crosslinking. These elastomers are mendable via retro Diels-Alder. Reprocessing of these polymers led to the formation of elastomers with preservation of excellent resilience and elastic recovery.

Recent Advances in Metal-Containing Polymer Hydrogels.

Metal-containing polymer hydrogels have attracted increasing interest in recent years due to their outstanding properties such as biocompatibility, recoverability, self-healing, and/or redox activity. In this short review, methods for the preparation of metal-containing polymer hydrogels are introduced and an overview of these hydrogels with various functionalities is given. It is hoped that this short update can stimulate innovative ideas to promote the research of metal-containing hydrogels in the communities.

Plant Oil-Derived Epoxy Polymers toward Sustainable Biobased Thermosets.

Epoxy polymers (EPs) derived from soybean oil with varied chemical structures are synthesized. These polymers are then cured with anhydrides to yield soybean-oil-derived epoxy thermosets. The curing kinetic, thermal, and mechanical properties are well characterized. Due to the high epoxide functionality per epoxy polymer chain, these thermosets exhibit tensile strength over an order of magnitude higher than a control formulation with epoxidized soybean oil. More importantly, thermosetting materials ranging from soft elastomers to tough thermosets can be obtained simply by using different EPs and/or by controlling feed ratios of EPs to anhydrides.

Metal-containing and related polymers for biomedical applications.

A survey of the most recent progress in the biomedical applications of metal-containing polymers is given. Due to the unique optical, electrochemical, and magnetic properties, at least 30 different metal elements, most of them transition metals, are introduced into polymeric frameworks for interactions with biology-relevant substrates via various means. Inspired by the advance of metal-containing small molecular drugs and promoted by the great progress in polymer chemistry, metal-containing polymers have gained momentum during recent decades. According to their different applications, this review summarizes the following biomedical applications: (1) metal-containing polymers as drug delivery vehicles; (2) metal-containing polymeric drugs and biocides, including antimicrobial and antiviral agents, anticancer drugs, photodynamic therapy agents, radiotherapy agents and biocides; (3) metal-containing polymers as biosensors, and (4) metal-containing polymers in bioimaging.

Development of Core-Shell Nanostructures by In Situ Assembly of Pyridine-Grafted Diblock Copolymer and Transferrin for Drug Delivery Applications.

We previously reported the coassembly of various proteins with poly(4-vinylpyridine) (P4VP) to form core-shell nanoparticles (CSNPs). However, P4VP suffers from its cytotoxicity and in vivo toxicity, which prohibit it from many potential biomedical applications. Here, pyridine-grafted diblock copolymer poly(caprolactone-graft-pyridine)-block-poly(caprolactone) [P(CL-g-Py)-b-PCL] was prepared through a combination of ring-opening polymerization and Cu(I) catalyzed azide-alkyne cycloaddition reaction. CSNPs could be readily constructed by the self-assembly of transferrin (Tf) and P(CL-g-Py)-b-PCL, which showed a narrower range of particle sizes, improved stability, and higher loading capacity for anticancer drug doxorubicin (DOX), compared with similar particles prepared from the coassembly of Tf and P4VP. Additionally, the drug-loaded Tf/P(CL-g-Py)-b-PCL CSNPs could effectively target MCF7 cancer cells via the binding of Tf to transferrin receptors (TfR).

Selective Capture and Quick Detection of Targeting Cells with SERS-Coding Microsphere Suspension Chip.

Circulating tumor cells (CTCs) captured from blood fluid represent recurrent cancers and metastatic lesions to monitor the situation of cancers. We develop surface-enhanced Raman scattering (SERS)-coding microsphere suspension chip as a new strategy for fast and efficient capture, recovery, and detection of targeting cancer cells. Using HeLa cells as model CTCs, we first utilize folate as a recognition molecule to be immobilized in magnetic composite microspheres for capturing HeLa cells and attaining high capturing efficacy (up to 95%). After capturing cells, the composite microsphere, which utilizes a disulfide bond as crosslinker in the polymer shell and as a spacer for linking folate, can recycle 90% cells within 20 min eluted by glutathion solution. Taking advantage of the SERS with fingerprint features, we characterize captured/recovered cells with the unique signal of report-molecule 4-aminothiophenol through introducing the SERS-coding microsphere suspension chip to CTCs. Finally, the exploratory experiment of sieving cells shows that the magnetic composite microspheres can selectively capture the HeLa cells from samples of mixed cells, indicating that these magnetic composite microspheres have potential in real blood samples for capturing CTCs.

Antibacterial and Biofilm-Disrupting Coatings from Resin Acid-Derived Materials.

We report antibacterial, antibiofilm, and biocompatible properties of surface-immobilized, quaternary ammonium-containing, resin acid-derived compounds and polycations that are known to be efficient antimicrobial agents with minimum toxicities to mammalian cells. Surface immobilization was carried out by the employment of two robust, efficient chemical methods: Copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition click reaction, and surface-initiated atom transfer radical polymerization. Antibacterial and antibiofilm activities against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli were strong. Hemolysis assays and the growth of human dermal fibroblasts on the modified surfaces evidenced their biocompatibility. We demonstrate that the grafting of quaternary ammonium-decorated abietic acid compounds and polymers from surfaces enables the incorporation of renewable biomass in an effective manner to combat bacteria and biofilm formation in biomedical applications.

UV-absorbent lignin-based multi-arm star thermoplastic elastomers.

Lignin-grafted copolymers, namely lignin-graft-poly(methyl methacrylate-co-butyl acrylate) (lignin-g-P(MMA-co-BA)), are synthesized via "grafting from" atom transfer radical polymerization (ATRP) with the aid of lignin-based macroinitiators. By manipulating the monomer feed ratios of MMA/BA, grafted copolymers with tunable glass transition temperatures (-10-40 °C) are obtained. These copolymers are evaluated as sustainable thermoplastic elastomers (TPEs). The results suggest that the mechanical properties of these TPEs lignin-g-P(MMA-co-BA) copolymers are improved significantly by comparing with those of linear P(MMA-co-BA) copolymer counterparts, and the elastic strain recovery is nearly 70%. Lignin-g-P(MMA-co-BA) copolymers exhibit high absorption in the range of the UV spectrum, which might allow for applications in UV-blocking coatings.

Antimicrobial metallopolymers and their bioconjugates with conventional antibiotics against multidrug-resistant bacteria.

Bacteria are now becoming more resistant to most conventional antibiotics. Methicillin-resistant Staphylococcus aureus (MRSA), a complex of multidrug-resistant Gram-positive bacterial strains, has proven especially problematic in both hospital and community settings by deactivating conventional ß-lactam antibiotics, including penicillins, cephalosporins, and carbapenems, through various mechanisms, resulting in increased mortality rates and hospitalization costs. Here we introduce a class of charged metallopolymers that exhibit synergistic effects against MRSA by efficiently inhibiting activity of ß-lactamase and effectively lysing bacterial cells. Various conventional ß-lactam antibiotics, including penicillin-G, amoxicillin, ampicillin, and cefazolin, are protected from ß-lactamase hydrolysis via the formation of unique ion-pairs between their carboxylate anions and cationic cobaltocenium moieties. These discoveries could provide a new pathway for designing macromolecular scaffolds to regenerate vitality of conventional antibiotics to kill multidrug-resistant bacteria and superbugs.

Facile preparation of cobaltocenium-containing polyelectrolyte via click chemistry and RAFT polymerization.

A facile method to prepare cationic cobaltocenium-containing polyelectrolyte is reported. Cobaltocenium monomer with methacrylate is synthesized by copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction between 2-azidoethyl methacrylate and ethynylcobaltocenium hexafluorophosphate. Further controlled polymerization is achieved by reversible addition-fragmentation chain transfer polymerization (RAFT) by using cumyl dithiobenzoate (CDB) as a chain transfer agent. Kinetic study demonstrates the controlled/living process of polymerization. The obtained side-chain cobaltocenium-containing polymer is a metal-containing polyelectrolyte that shows characteristic redox behavior of cobaltocenium.

Ring-opening metathesis polymerization of 18-e Cobalt(I)-containing norbornene and application as heterogeneous macromolecular catalyst in atom transfer radical polymerization.

In the last decades, metallopolymers have received great attention due to their various applications in the fields of materials and chemistry. In this article, a neutral 18-electron exo-substituted η(4) -cyclopentadiene CpCo(I) unit-containing polymer is prepared in a controlled/"living" fashion by combining facile click chemistry and ring-opening meta-thesis polymerization (ROMP). This Co(I)-containing polymer is further used as a heterogeneous macromolecular catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate and styrene.

Intrinsic antimicrobial resistance: Molecular biomaterials to combat microbial biofilms and bacterial persisters.

The escalating rise in antimicrobial resistance (AMR) coupled with a declining arsenal of new antibiotics is imposing serious threats to global public health. A pervasive aspect of many acquired AMR infections is that the pathogenic microorganisms exist as biofilms, which are equipped with superior survival strategies. In addition, persistent and recalcitrant infections are seeded with bacterial persister cells at infection sites. Together, conventional antibiotic therapeutics often fail in the complete treatment of infections associated with bacterial persisters and biofilms. Novel therapeutics have been attempted to tackle AMR, biofilms, and persister-associated complex infections. This review focuses on the progress in designing molecular biomaterials and therapeutics to address acquired and intrinsic AMR, and the fundamental microbiology behind biofilms and persisters. Starting with a brief introduction of AMR basics and approaches to tackling acquired AMR, the emphasis is placed on various biomaterial approaches to combating intrinsic AMR, including (1) semi-synthetic antibiotics; (2) macromolecular or polymeric biomaterials mimicking antimicrobial peptides; (3) adjuvant effects in synergy; (4) nano-therapeutics; (5) nitric oxide-releasing antimicrobials; (6) antimicrobial hydrogels; (7) antimicrobial coatings. Particularly, the structure-activity relationship is elucidated in each category of these biomaterials. Finally, illuminating perspectives are provided for the future design of molecular biomaterials to bypass AMR and cure chronic multi-drug resistant (MDR) infections.