Anisotropic Multiexciton Quintet and Triplet Dynamics in Singlet Fission via Pulsed Electron Spin Resonance.

The quintet triplet-pair state may be generated upon singlet fission and is a critical intermediate that dictates the fate of excitons, which can be exploited for photovoltaics, information technologies, and biomedical imaging. In this report, we demonstrate that continuous-wave and pulsed electron spin resonance techniques such as phase-inverted echo-amplitude detected nutation (PEANUT), which have emerged as the primary tool for identifying the spin pathways in singlet fission, probe fundamentally different triplet-pair species. We directly observe that the generation rate of high-spin triplet pairs is dependent on the molecular orientation with respect to the static magnetic field. Moreover, we demonstrate that this observation can prevent incorrect analysis of continuous-wave electron spin resonance (cw-ESR) measurements and provide insight into the design of materials to target specific pathways that optimize exciton properties for specific applications.

Singlet Fission in Concentrated TIPS-Pentacene Solutions: The Role of Excimers and Aggregates.

The excited-state dynamics of 6,13-bis(triisopropylsilylethynyl)pentacene is investigated to determine the role of excimer and aggregate formation in singlet fission in high-concentration solutions. Photoluminescence spectra were measured by excitation with the evanescent wave in total internal reflection, in order to avoid reabsorption effects. The spectra over nearly two magnitudes of concentration were nearly identical, with no evidence for excimer emission. Time-correlated single-photon counting measurements confirm that the fluorescence lifetime shortens with concentration. The observed rate constant grows at high concentrations, and this effect is modeled in terms of the hard-sphere radial distribution function. NMR measurements confirm that aggregation takes place with a binding constant of between 0.14 and 0.43 M-1. Transient absorption measurements are consistent with a diffusive encounter mechanism for singlet fission, with hints of more rapid singlet fission in aggregates at the highest concentration measured. These data show that excimers do not play the role of an emissive intermediate in exothermic singlet fission in solution and that, while aggregation occurs at higher concentrations, the mechanism of singlet fission remains dominated by diffusive encounters.

Pentacene-Bridge Interactions in an Axially Chiral Binaphthyl Pentacene Dimer.

Molecular chirality can be exploited as a sensitive reporter of the nature of intra- and interchromophore interactions in π-conjugated systems. In this report, we designed an intramolecular singlet fission (iSF)-based pentacene dimer with an axially chiral binaphthyl bridge (2,2'-(2,2'-dimethoxy-[1,1'-binaphthalene]-3,3'-diyl) n-octyl-di-isopropyl silylethynyl dipentacene, BNBP) to utilize its chiroptical response as a marker of iSF chromophore-bridge-chromophore (SFC-ß-SFC) interactions. The axial chirality of the bridge enforces significant one-handed excitonic coupling of the pentacene monomer units; as such, BNBP exhibits significant chiroptical response in the ground and excited states. We analyzed the chiroptical response of BNBP using the exciton coupling method and quadratic response density functional theory calculations to reveal that higher energy singlet transitions in BNBP involve significant delocalization of the electronic density on the bridging binaphthyl group. Our results highlight the promising application of chiroptical techniques to investigate the nature of SFC-ß-SFC interactions that impact singlet fission dynamics.

Fluctuating exchange interactions enable quintet multiexciton formation in singlet fission.

Several recent electron spin resonance studies have observed a quintet multiexciton state during the singlet fission process. Here, we provide a general theoretical explanation for the generation of this state by invoking a time-varying exchange coupling between pairs of triplet excitons and subsequently solving the relevant time-varying spin Hamiltonian for different rates at which the exchange coupling varies. We simulate experimental ESR spectra and draw qualitative conclusions about the adiabatic and diabatic transitions between triplet pair spin states.

Elucidation of Excitation Energy Dependent Correlated Triplet Pair Formation Pathways in an Endothermic Singlet Fission System.

Singlet fission is the spin-allowed conversion of a photogenerated singlet exciton into two triplet excitons in organic semiconductors, which could enable single-junction photovoltaic cells to break the Shockley-Queisser limit. The conversion of singlets to free triplets is mediated by an intermediate correlated triplet pair (TT) state, but an understanding of how the formation and dissociation of these states depend on energetics and morphology is lacking. In this study, we probe the dynamics of TT states in a model endothermic fission system, TIPS-Tc nanoparticles, which show a mixture of crystalline and disordered regions. We observe the formation of different TT states, with varying yield and different rates of singlet decay, depending on the excitation energy. An emissive TT state is observed to grow in over 1 ns when excited at 480 nm, in contrast to excitation at lower energies where this emissive TT state is not observed. This suggests that the pathway for singlet fission in these nanoparticles is strongly influenced by the initial sub-100 fs relaxation of the photoexcited state away from the Franck-Condon point, with multiple possible TT states. On nanosecond time scales, the TT states are converted to free triplets, which suggests that TT states might diffuse into the disordered regions of the nanoparticles where their breakup to free triplets is favored. The free triplets then decay on µs time scales, despite the confined nature of the system. Our results provide important insights into the mechanism of endothermic singlet fission and the design of nanostructures to harness singlet fission.

Tuning Singlet Fission in π-Bridge-π Chromophores.

We have designed a series of pentacene dimers separated by homoconjugated or nonconjugated bridges that exhibit fast and efficient intramolecular singlet exciton fission (iSF). These materials are distinctive among reported iSF compounds because they exist in the unexplored regime of close spatial proximity but weak electronic coupling between the singlet exciton and triplet pair states. Using transient absorption spectroscopy to investigate photophysics in these molecules, we find that homoconjugated dimers display desirable excited-state dynamics, with significantly reduced recombination rates as compared to conjugated dimers with similar singlet fission rates. In addition, unlike conjugated dimers, the time constants for singlet fission are relatively insensitive to the interplanar angle between chromophores, since rotation about σ bonds negligibly affects the orbital overlap within the π-bonding network. In the nonconjugated dimer, where the iSF occurs with a time constant >10 ns, comparable to the fluorescence lifetime, we used electron spin resonance spectroscopy to unequivocally establish the formation of triplet-triplet multiexcitons and uncoupled triplet excitons through singlet fission. Together, these studies enable us to articulate the role of the conjugation motif in iSF.

Effect of Blend Composition on Binary Organic Solar Cells Using a Low Band Gap Polymer.

This report investigates the influence of the solution blend composition of binary bulk heterojunction organic solar cells composed of poly(2,1,3-benzothiadiazole-4,7-diyl[4,4-bis(2-ethylhexyl)-4H- cyclopenta[2,1-b:3,4-b'dithiophene-2,6-diy]] (PCPDTBT) and [6,6]-phenyl C71 butyric acid methyl ester (PC71BM). The blend polymer:fullerene composition was varied from 1:1 (50 wt% PC71 BM) to 2:9 (82 wt% PC71 BM). Increasing the amount of polymer in the blend results in the greatest overall absorption, as the donor material PCPDTBT is the main contributor to absorption. However, high polymer content leads to poor photovoltaic performance. For this material combination, the optimum blend polymer:fullerene composition was found to be 2:7. Increasing the fullerene content in the blend led to a significant improvement in the internal quantum efficiency of devices. This was correlated with an increase of the electron mobility, as the fullerene content was increased. Improved electron transport, leading to more balanced transport between electrons and holes, significantly improved the short circuit current density (Jsc) and fill factor (FF).

Singlet fission in TIPS-anthracene thin films.

Singlet fission is an exciton multiplication process that allows for the conversion of one singlet exciton into two triplet excitons. Organic semiconductors, such as acenes and their soluble bis(triisopropylsilylethynyl) (TIPS) substituted counterparts, have played a major role in elucidating the understanding of the underlying mechanisms of singlet fission. Despite this, one prominent member of the acene family that has received little experimental attention to date is TIPS-anthracene, even with computational studies suggesting potential high singlet fission yields in the solid state. Here, time-resolved spectroscopic and magneto-photoluminescence measurements were performed on spin-cast films of TIPS-anthracene, showing evidence for singlet fission. A singlet fission yield of 19% (out of 200%) is estimated from transient absorption spectroscopy. Kinetic modeling of the magnetic field effect on photoluminescence suggests that fast rates of triplet dissociation lead to a low magnetic photoluminescence effect and that non-radiative decay of both the S1 and 1(TT) states is the cause for the low triplet yield.

The exciton dynamics in tetracene thin films.

Tetracene thin films are investigated by time-resolved photoluminescence on picosecond to nanosecond time-scales. The picosecond luminescence decay dynamics is confirmed to be independent of temperature, but the nanosecond timescale luminescence dynamics is highly temperature dependent. This is interpretted in terms of motion along an intermolecular coordinate which couples the S1 state to the multiexciton (ME) state, arising from frustrated photodimerization, and giving rise to exciton dimming through adiabatic coupling. Dull excitons persist at low temperatures, but can thermally access separated triplet states at higher temperatures, quenching the delayed fluorescence. The effects of exciton density on both the picosecond and nanosecond luminescence dynamics are investigated, and a rate constant of (1.70 ± 0.08) × 10(-8) cm(3) s(-1) is determined for singlet-singlet annihilation.

Power Dependence of the Magnetic Field Effect on Triplet Fusion: A Quantitative Model.

Two strategies for improving solar energy efficiencies, triplet fusion and singlet fission, rely on the details of triplet-triplet interactions. In triplet fusion, there are several steps, each of which is a possible loss mechanism. In solution, the parameters describing triplet fusion collisions are difficult to inspect. Here we show that these parameters can be determined by examining the magnetic field dependence of triplet fusion upconversion. We show that there is a reduction of the magnetic field effect for perylene triplet fusion as the system moves from the quadratic to linear annihilation regimes with an increase in laser power. Our data are modeled with a small set of parameters that characterize the triplet fusion dynamics. These parameters are cross-validated with molecular dynamics simulations. This approach can be applied to both solution and solid state materials, providing a tool for screening potential annihilators for photon upconversion.

On the efficiency limit of triplet-triplet annihilation for photochemical upconversion.

Photochemical upconversion is performed, whereby emitter triplet states are produced through triplet energy transfer from sensitizer molecules excited with low energy photons. The triplet emitter molecules undergo triplet-triplet annihilation to yield excited singlet states which emit upconverted fluorescence. Experiments comparing the 560 nm prompt fluorescence when rubrene emitter molecules are excited directly, using 525 nm laser pulses, to the delayed, upconverted fluorescence when the porphyrin sensitizer molecules are excited with 670 nm laser pulses reveal annihilation efficiencies to produce excited singlet emitters in excess of 20%. Conservative measurements reveal a 25% annihilation efficiency, while a direct comparison between the prompt and delayed fluorescence yield suggests a value as high as 33%. Due to fluorescence quenching, the photon upconversion efficiencies are lower, at 16%.

Ultra-fast intramolecular singlet fission to persistent multiexcitons by molecular design.

Singlet fission-that is, the generation of two triplets from a lone singlet state-has recently resurfaced as a promising process for the generation of multiexcitons in organic systems. Although advances in this area have led to the discovery of modular classes of chromophores, controlling the fate of the multiexciton states has been a major challenge; for example, promoting fast multiexciton generation while maintaining long triplet lifetimes. Unravelling the dynamical evolution of the spin- and energy conversion processes from the transition of singlet excitons to correlated triplet pairs and individual triplet excitons is necessary to design materials that are optimized for translational technologies. Here, we engineer molecules featuring a discrete energy gradient that promotes the migration of strongly coupled triplet pairs to a spatially separated, weakly coupled state that readily dissociates into free triplets. This 'energy cleft' concept allows us to combine the amplification and migration processes within a single molecule, with rapid dissociation of tightly bound triplet pairs into individual triplets that exhibit lifetimes of ~20 µs.

Beyond Shockley-Queisser: Molecular Approaches to High-Efficiency Photovoltaics.

Molecular materials afford abundant flexibility in the tunability of physical and electronic properties. As such, they are ideally suited to engineering low-cost, flexible, light-harvesting materials that break away from the single-threshold paradigm. Single-threshold solar cells are capable of harvesting a maximum of 33.7% of incident sunlight, whereas two-threshold cells are capable of energy harvesting efficiencies exceeding 45%. In this Perspective, we provide the theoretical background with which upper efficiency limits for various multiple-threshold solar cell architectures may be calculated and review and discuss various reports that employ processes such as triplet-triplet annihilation and singlet fission in multiple-threshold devices comprised of molecular materials.