Engineering Phage Host-Range and Suppressing Bacterial Resistance through Phage Tail Fiber Mutagenesis.

The rapid emergence of antibiotic-resistant infections is prompting increased interest in phage-based antimicrobials. However, acquisition of resistance by bacteria is a major issue in the successful development of phage therapies. Through natural evolution and structural modeling, we identified host-range-determining regions (HRDRs) in the T3 phage tail fiber protein and developed a high-throughput strategy to genetically engineer these regions through site-directed mutagenesis. Inspired by antibody specificity engineering, this approach generates deep functional diversity while minimizing disruptions to the overall tail fiber structure, resulting in synthetic "phagebodies." We showed that mutating HRDRs yields phagebodies with altered host-ranges, and select phagebodies enable long-term suppression of bacterial growth in vitro, by preventing resistance appearance, and are functional in vivo using a murine model. We anticipate that this approach may facilitate the creation of next-generation antimicrobials that slow resistance development and could be extended to other viral scaffolds for a broad range of applications.

Net charge tuning modulates the antiplasmodial and anticancer properties of peptides derived from scorpion venom.

VmCT1, a linear helical antimicrobial peptide isolated from the venom of the scorpion Vaejovis mexicanus, displays broad spectrum antimicrobial activity against bacteria, fungi, and protozoa. Analogs derived from this peptide containing single Arg-substitutions have been shown to increase antimicrobial and antiparasitic activities against Trypanossoma cruzi. Here, we tested these analogs against malaria, an infectious disease caused by Plasmodium protozoa, and assessed their antitumoral properties. Specifically, we tested VmCT1 synthetic variants [Arg]3 -VmCT1-NH2 , [Arg]7 -VmCT1-NH2 , and [Arg]11 -VmCT1-NH2 , against Plasmodium gallinaceum sporozoites and MCF-7 mammary cancer cells. Our screen identified peptides [Arg]3 -VmCT1-NH2 and [Arg]7 -VmCT1-NH2 as potent antiplasmodial agents (IC50 of 0.57 and 0.51 µmol L-1 , respectively), whereas [Arg]11 -VmCT1-NH2 did not show activity against P. gallinaceum sporozoites. Interestingly, all peptides presented activity against MCF-7 and displayed lower cytotoxicity toward healthy cells. We demonstrate that increasing the net positive charge of VmCT1, through arginine substitutions, modulates the biological properties of this peptide family yielding novel antiplasmodial and antitumoral molecules.

Arg-substituted VmCT1 analogs reveals promising candidate for the development of new antichagasic agent.

VmCT1 is an antimicrobial peptide (AMP) isolated from the venom of the scorpion Vaejovis mexicanus with antimicrobial, anticancer and antimalarial activities, which the rational design with Arg-substitution has yielded AMPs with higher antimicrobial activity than VmCT1. Chagas is a neglected tropical disease, becoming the development of new antichagasic agents is urgent. Thus, we aimed to evaluate the antichagasic effect of VmCT1 and three Arg-substituted analogues, as well their action mechanism. Peptides were tested against the epimastigote, trypomastigote, amastigote forms of Trypanossoma cruzi Y strain and against LLC-MK2 mammalian cells. The mechanism of action of these peptides was evaluated by means of flow cytometry and scanning electron microscopy. VmCT1 presented activity against all three forms of T. cruzi, with EC50 against trypomastigote forms of 1.37 µmol L-1 and selectivity index (SI) of 58. [Arg]3-VmCT1, [Arg]7-VmCT1 and [Arg]11-VmCT1 also showed trypanocidal effect, but [Arg]11-VmCT1 had the best effect, being able to decrease the EC50 against trypomastigote forms to 0.8 µmol L-1 and increase SI to 175. Necrosis was cell death pathway of VmCT1, as well [Arg]7-VmCT1 and [Arg]11-VmCT1, such as observed by membrane damage in flow cytometry analyses and scanning-electron-microscopy. In conclusion, [Arg]11-VmCT1 revealed promising as a candidate for new antichagasic therapeutics.

Repurposing the scorpion venom peptide VmCT1 into an active peptide against Gram-negative ESKAPE pathogens.

VmCT1 is a cationic antimicrobial peptide (AMP) from the venom of the scorpion Vaejovis mexicanus. VmCT1 and analogs were designed with single substitutions for verifying the influence of changes in physicochemical features described as important for AMPs antimicrobial and hemolytic activities, as well as their effect on VmCT1 analogs resistance against proteases action. The increase of the net positive charge by the introduction of an arginine residue in positions of the hydrophilic face of the helical structure affected directly the antimicrobial activity. Arg-substituted analogs presented activity against Gram-negative bacteria from the ESKAPE list of pathogens that were not observed for VmCT1. Additionally, peptides with higher net positive charge presented increased antimicrobial activity with values ranging from 0.39 to 12.5 µmol L-1 against Gram-positive and Gram-negative bacteria and fungi. The phenylalanine substitution by glycine (position 1), and the valine substitution by a proline residue (position 8) led to analogs with lower hemolytic activity (at concentrations 50 and 100 µmol L-1, respectively). These results revealed that it is possible to modulate the biological activities of VmCT1 derivatives by designing single substituted-analogs as prospective therapeutics against bacteria and fungi.

Antimicrobial activity of leucine-substituted decoralin analogs with lower hemolytic activity.

Linear cationic α-helical antimicrobial peptides are promising chemotherapeutics. Most of them act by different mechanisms, making it difficult to microorganisms acquiring resistance. Decoralin is an example of antimicrobial peptide; it was described by Konno et al. and presented activity against microorganisms, but with pronounced hemolytic activity. We synthesized leucine-substituted decoralin analogs designed based on important physicochemical properties, which depend on the maintenance of the amphiphilic α-helical tendency of the native molecule. Peptides were synthesized, purified, and characterized, and the conformational studies were performed. The results indicated that the analogs presented both higher therapeutic indexes, but with antagonistic behavior. While [Leu]10 -Dec-NH2 analog showed similar activity against different microorganisms (c.a. 0.4-0.8 µmol L-1 ), helical structuration, and some hemolytic activity, [Leu]8 -Dec-NH2 analog did not tend to helical structure and presented antimicrobial activities two orders higher than the other two peptides analyzed. On the other hand, this analog showed to be the less hemolytic (MHC value = 50.0 µmol L-1 ). This approach provided insight for understanding the effects of the leucine substitution in the amphiphilic balance. They led to changes on the conformational tendency, which showed to be important for the mechanism of action and affecting antimicrobial and hemolytic activities. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

Evidences for the action mechanism of angiotensin II and its analogs on Plasmodium sporozoite membranes.

Malaria is an infectious disease responsible for approximately one million deaths annually. Oligopeptides such as angiotensin II (AII) and its analogs are known to have antimalarial effects against Plasmodium gallinaceum and Plasmodium falciparum. However, their mechanism of action is still not fully understood at the molecular level. In the work reported here, we investigated this issue by comparing the antimalarial activity of AII with that of (i) its diastereomer formed by only d-amino acids; (ii) its isomer with reversed sequence; and (iii) its analogs restricted by lactam bridges, the so-called VC5 peptides. Data from fluorescence spectroscopy indicated that the antiplasmodial activities of both all-D-AII and all-D-VC5 were as high as those of the related peptides AII and VC5, respectively. In contrast, retro-AII had no significant effect against P. gallinaceum. Conformational analysis by circular dichroism suggested that AII and its active analogs usually adopted a ß-turn conformation in different solutions. In the presence of membrane-mimetic micelles, AII had also a ß-turn conformation, while retro-AII was random. Molecular dynamics simulations demonstrated that the AII chains were slightly more bent than retro-AII at the surface of a model membrane. At the hydrophobic membrane interior, however, the retro-AII chain was severely coiled and rigid. AII was much more flexible and able to experience both straight and coiled conformations. We took it as an indication of the stronger ability of AII to interact with membrane headgroups and promote pore formation.

New linear antiplasmodial peptides related to angiotensin II.

BACKGROUND: Antiplasmodial activities of angiotensin II and its analogues have been extensively investigated in Plasmodium gallinaceum and Plasmodium falciparum parasite species. Due to its vasoconstrictor property angiotensin II cannot be used as an anti-malarial drug. METHODS: This work presents the solid-phase syntheses and liquid chromatography and mass spectrometry characterization of ten linear peptides related to angiotensin II against mature P. gallinaceum sporozoites and erythrocyte invasion by P. falciparum. Conformational analyses were performed by circular dichroism. IC50 assays were performed to identify the ideal concentration used on the biological tests and haemolytical erythrocytic assays were made to verify the viability of the biological experiments. The contractile responses of the analogues were made to evaluate if they are promising candidates to be applied as antiplasmodial drugs. RESULTS: The results indicate two short-peptides constituted by hydrophobic residues (5 and 6) with antiplasmodial activity in these models, 89 and 94 % of biological activity against P. gallinaceum sporozoite, respectively, and around 50 % of activity against P. falciparum. Circular dichroism spectra suggested that all the peptides adopted ß-turn conformation in different solutions, except peptide 3. Besides the biological assays IC50, the haemolysis assays and contractile response activities were applied for peptides 5 and 6, which did not present expressive results. CONCLUSIONS: The hydrophobic portion and the arginine, tyrosine, proline, and phenylalanine, when present on peptide primary sequence, tend to increase the antiplasmodial activity. This class of peptides can be explored, as anti-malarial drugs, after in vivo model tests. Graphical abstract: The most active peptide presented 94 % activity on P. gallinaceum sporozoites and 53 % inhibited P. falciparum ring forms invasion.

Angiotensin II restricted analogs with biological activity in the erythrocytic cycle of Plasmodium falciparum.

The anti-plasmodial activity of conformationally restricted analogs of angiotensin II against Plasmodium gallinaceum has been described. To observe activity against another Plasmodium species, invasion of red blood cells by Plasmodium falciparum was analyzed. Analogs restricted with lactam or disulfide bridges were synthesized to determine their effects and constraints in the peptide-parasite interaction. The analogs were synthesized using tert-butoxycarbonyl and fluoromethoxycarbonyl solid phase methods, purified by liquid chromatography, and characterized by mass spectrometry. Results indicated that the lactam bridge restricted analogs 1 (Glu-Asp-Arg-Orn-Val-Tyr-Ile-His-Pro-Phe) and 3 (Asp-Glu-Arg-Val-Orn-Tyr-Ile-His-Pro-Phe) showed activity toward inhibition of ring formation stage of P. falciparum erythrocytic cycle, preventing invasion in about 40% of the erythrocytes. The disulfide-bridged analog 10 (Cys-Asp-Arg-Cys-Val-Tyr-Ile-His-Pro-Phe) was less effective yet significant, showing a 25% decrease in infection of new erythrocytes. In all cases, the peptides presented no pressor activity, and hydrophobic interactions between the aromatic and alkyl amino acid side chains were preserved, a factor proven important in efficacy against P. gallinaceum. In contrast, hydrophilic interactions between the Asp(1) carboxyl and Arg(2) guanidyl groups proved not to be as important as they were in the case of P. gallinaceum, while interactions between the Arg(2) guanidyl and Tyr(4) hydroxyl groups were not important in either case. The ß-turn conformation was predominant in all of the active peptides, proving importance in anti-plasmodial activity. This approach provides insight for understanding the importance of each amino acid residue on the native angiotensin II structure and a new direction for the design of potential chemotherapeutic agents.

Antiplasmodial activity study of angiotensin II via Ala scan analogs.

Angiotensin II (AII) as well as analog peptides shows antimalarial activity against Plasmodium gallinaceum and Plasmodium falciparum, but the exact mechanism of action is still unknown. This work presents the solid-phase synthesis and characterization of eight peptides corresponding to the alanine scanning series of AII plus the amide-capped derivative and the evaluation of the antiplasmodial activity of these peptides against mature P. gallinaceum sporozoites. The Ala screening data indicates that the replacement of either the Ile(5) or the His(6) residues causes minor effects on the in vitro antiplasmodial activity compared with AII, i.e. AII (88%), [Ala(6) ]-AII (79%), and [Ala(5) ]-AII (75%). Analogs [Ala(3) ]-AII, [Ala(1) ]-AII, and AII-NH2 showed antiplasmodial activity around 65%, whereas the activity of the [Ala(8) ]-AII, [Ala(7) ]-AII, [Ala(4) ]-AII, and [Ala(2) ]-AII analogs is lower than 45%. Circular dichroism data suggest that AII and the most active analogs adopt a ß-fold conformation in different solutions. All AII analogs, except [Ala(4) ]-AII and [Ala(8) ]-AII, show contractile responses and interact with the AT1 receptor, [Ala(5) ]-AII and [Ala(6) ]-AII. In conclusion, this approach is helpful to understand the contribution of each amino acid residue to the bioactivity of AII, opening new perspectives toward the design of new sporozoiticidal compounds.

Recombinant production of antimicrobial peptides in plants.

Classical plant breeding methods are limited in their ability to confer disease resistance on plants. However, in recent years, advancements in molecular breeding and biotechnological have provided new approaches to overcome these limitations and protect plants from disease. Antimicrobial peptides (AMPs) constitute promising agents that may be able to protect against infectious agents. Recently, peptides have been recombinantly produced in plants at scale and low cost. Because AMPs are less likely than conventional antimicrobials to elicit resistance of pathogenic bacteria, they open up exciting new avenues for agricultural applications. Here, we review recent advances in the design and production of bioactive recombinant AMPs that can effectively protect crop plants from diseases.

Peptides from non-immune proteins target infections through antimicrobial and immunomodulatory properties.

Encrypted peptides have been recently described as a new class of antimicrobial molecules. They have been proposed to play a role in host immunity and as alternatives to conventional antibiotics. Intriguingly, many of these peptides are found embedded in proteins unrelated to the immune system, suggesting that immunological responses may extend beyond traditional host immunity proteins. To test this idea, here we synthesized and tested representative peptides derived from non-immune proteins for their ability to exert antimicrobial and immunomodulatory properties. Our experiments revealed that most of the tested peptides from non-immune proteins, derived from structural proteins as well as proteins from the nervous and visual systems, displayed potent in vitro antimicrobial activity. These molecules killed bacterial pathogens by targeting their membrane, and those originating from the same region of the body exhibited synergistic effects when combined. Beyond their antimicrobial properties, nearly 90% of the peptides tested exhibited immunomodulatory effects, modulating inflammatory mediators such as IL-6, TNF-α, and MCP-1. Moreover, eight of the peptides identified, collagenin 3 and 4, zipperin-1 and 2, and immunosin-2, 3, 12, and 13, displayed anti-infective efficacy in two different preclinical mouse models, reducing bacterial infections by up to four orders of magnitude. Altogether, our results support the hypothesis that peptides from non-immune proteins may play a role in host immunity. These results potentially expand our notion of the immune system to include previously unrecognized proteins and peptides that may be activated upon infection to confer protection to the host.

Structure-function-guided design of synthetic peptides with anti-infective activity derived from wasp venom.

Antimicrobial peptides (AMPs) derived from natural toxins and venoms offer a promising alternative source of antibiotics. Here, through structure-function-guided design, we convert two natural AMPs derived from the venom of the solitary eumenine wasp Eumenes micado into α-helical AMPs with reduced toxicity that kill Gram-negative bacteria in vitro and in a preclinical mouse model. To identify the sequence determinants conferring antimicrobial activity, an alanine scan screen and strategic single lysine substitutions are made to the amino acid sequence of these natural peptides. These efforts yield a total of 34 synthetic derivatives, including alanine substituted and lysine-substituted sequences with stabilized α-helical structures and increased net positive charge. The resulting lead synthetic peptides kill the Gram-negative pathogens Escherichia coli and Pseudomonas aeruginosa (PAO1 and PA14) by rapidly permeabilizing both their outer and cytoplasmic membranes, exhibit anti-infective efficacy in a mouse model by reducing bacterial loads by up to three orders of magnitude, and do not readily select for bacterial resistance.

Molecular hybridization strategy for tuning bioactive peptide function.

The physicochemical and structural properties of antimicrobial peptides (AMPs) determine their mechanism of action and biological function. However, the development of AMPs as therapeutic drugs has been traditionally limited by their toxicity for human cells. Tuning the physicochemical properties of such molecules may abolish toxicity and yield synthetic molecules displaying optimal safety profiles and enhanced antimicrobial activity. Here, natural peptides were modified to improve their activity by the hybridization of sequences from two different active peptide sequences. Hybrid AMPs (hAMPs) were generated by combining the amphipathic faces of the highly toxic peptide VmCT1, derived from scorpion venom, with parts of four other naturally occurring peptides having high antimicrobial activity and low toxicity against human cells. This strategy led to the design of seven synthetic bioactive variants, all of which preserved their structure and presented increased antimicrobial activity (3.1-128 µmol L-1). Five of the peptides (three being hAMPs) presented high antiplasmodial at 0.8 µmol L-1, and virtually no undesired toxic effects against red blood cells. In sum, we demonstrate that peptide hybridization is an effective strategy for redirecting biological activity to generate novel bioactive molecules with desired properties.

Molecular tools for probing the microbiome.

The microbiome plays essential roles in health and disease. Our understanding of the imbalances that can arise in the microbiome and their consequences is held back by a lack of technologies that selectively knock out members of these microbial communities. Antibiotics and fecal transplants, the existing methods for manipulating the microbiota of the gastrointestinal tract, are not sufficiently pinpointed to reveal how particular microbial genes, strains, or species affect human health. A toolset for the precise manipulation of the microbiome could significantly advance disease diagnosis and treatment. Here, we provide an overview of current and future strategies for the development of molecular tools that can be used to probe the microbiome without producing off-target effects.

Methods for the design and characterization of peptide antibiotics.

Multi-drug resistant infections cause the death of millions of people worldwide. Today, there is an urgent need to identify innovative and sustainable alternatives to conventional antibiotics and to develop outside the box strategies to counter drug resistance. Versatile molecules such as antimicrobial peptides (AMPs), which display multiple mechanisms of action, have been explored as templates constituting a new generation of antibiotics. Here, we review recent methodological advances for the design, structural and functional characterization of AMPs. The methodologies outlined here have been validated and well established and may be used as a guide for the discovery, design, development, and reprogramming of peptide antibiotics.

Low-Cost Optodiagnostic for Minute-Time Scale Detection of SARS-CoV-2.

The COVID-19 pandemic has exacerbated our society's tremendous health equity gap. Disadvantaged populations have been disproportionally affected by COVID-19, lacking access to affordable testing, a known effective tool for preventing viral spread, hospitalizations, and deaths. Here, we describe COVID-19 Low-cost Optodiagnostic for Rapid testing (COLOR), a colorimetric biosensor fabricated on cotton swabs using gold nanoparticles modified with human angiotensin-converting enzyme 2 (ACE2), which costs 15¢ to produce and detects SARS-CoV-2 within 5 min. COLOR detected very low viral particle loads (limit of detection: 0.154 pg mL-1 of SARS-CoV-2 spike protein), and its color intensity correlated with the cycle threshold (Ct) values obtained using reverse transcription polymerase chain reaction (RT-PCR). The performance of COLOR was assessed using 100 nasopharyngeal/oropharyngeal (NP/OP) clinical samples, yielding sensitivity, specificity, and accuracy values of 96%, 84%, and 90%, respectively. In summary, each COLOR test can be manufactured for 15¢ and presents rapid minute-time scale detection of SARS-CoV-2, thus providing a solution to enable high-frequency testing, particularly in low-resource communities.

Synthetic Peptide Derived from Scorpion Venom Displays Minimal Toxicity and Anti-infective Activity in an Animal Model.

Multidrug-resistant bacteria represent a global health problem increasingly leading to infections that are untreatable with our existing antibiotic arsenal. Therefore, it is critical to identify novel effective antimicrobials. Venoms represent an underexplored source of potential antibiotic molecules. Here, we engineered a peptide (IsCT1-NH2) derived from the venom of the scorpion Opisthacanthus madagascariensis, whose application as an antimicrobial had been traditionally hindered by its high toxicity. Through peptide design and the knowledge obtained in preliminary studies with single and double-substituted analogs, we engineered IsCT1 derivatives with multiple amino acid substitutions to assess the impact of net charge on antimicrobial activity and toxicity. We demonstrate that increased net charge (from +3 to +6) significantly reduced toxicity toward human erythrocytes. Our lead synthetic peptide, [A]1[K]3[F]5[K]8-IsCT1-NH2 (net charge of +4), exhibited increased antimicrobial activity against Gram-negative and Gram-positive bacteria in vitro and enhanced anti-infective activity in a mouse model. Mechanism of action studies revealed that the increased antimicrobial activity of our lead molecule was due, at least in part, to its enhanced ability to permeabilize the outer membrane and depolarize the cytoplasmic membrane. In summary, we describe a simple method based on net charge tuning to turn highly toxic venom-derived peptides into viable therapeutics.

Physical methods for controlling bacterial colonization on polymer surfaces.

The adhesion and formation of microbial biofilm on material surfaces is a relevant problem in many areas including in medicine and biomaterials engineering. Biofilms are the primary cause of persistent infections associated with biomedical devices and clinical settings due to their tolerance and resistance to antimicrobial treatment. Reducing initial bacterial attachment to surfaces could decrease the formation of biofilms and, consequently, the posterior dispersion stage in which bacteria present within biofilms expand to other regions, spreading the infection. In this context, the use of surface topography to minimize microbial infections and biofilm formation represents an emerging area of research as it tackles this problem without the need to use antibiotics or other chemical agents. Herein, we review recent progress in surface topography-based antimicrobial approaches and provide an overview of the influence of micro- and nano-topography on bacterial surface attachment. We focus primarily on structured polymeric surfaces. The versatility and properties of polymer materials, along with their propensity to standardization at different length scales, make them an excellent option for fabrication of numerous medical devices. This work also provides a brief overview of recent advances in patterning polymers using lithography, direct-write patterning techniques, and instability-induced patterning. The impact of micro-, nano- and hierarchical surface structuration on the antimicrobial response of polymeric surfaces is addressed to offer new insights for the preparation of antimicrobial materials.

Wasp venom peptide as a new antichagasic agent.

Chagas disease is caused by Trypanosoma cruzi and affects approximately 10 million people a year worldwide. The only two treatment options, benznidazole and nifurtimox, have low efficacy and high toxicity towards human cells. Mastoporan peptide (MP) a small cationic AMP from the venom of the wasp Polybia paulista has been reported as a potent trypanocidal agent. Thus, we evaluated the antichagasic effect of another AMP from the venom of the same wasp Polybia paulista, polybia-CP (ILGTILGLLSKL-NH2), and investigated its mechanism of action against different stages of the trypanosomal cells life cycle. Polybia-CP was tested against the epimastigote, trypomastigote and amastigote forms of the T. cruzi Y strain (benznidazole-resistant strain) and inhibited the development of these forms. We also assessed the selectivity of the AMP against mammalian cells by exposing LLC-MK2 cells to polybia-CP, the peptide presented a high selectivity index (>106). The mechanism of action of polybia-CP on trypanosomal cells was investigated by flow cytometry, scanning electron microscopy (SEM) and enzymatic assays with T. cruzi GAPDH (tcGAPDH), enzyme that catalyzes the sixth step of glycolysis. Polybia-CP induced phosphatidylserine exposure, it also increased the formation of reactive species of oxigen (ROS) and reduced the transmembrane mitochondrial potential. Polybia-CP also led to cell shrinkage, evidencing apoptotic cell death. We did not observe the inhibition of tcGAPDH or autophagy induction. Altogether, polybia-CP has shown the features of a promising template for the development of new antichagasic agents.

Toward computer-made artificial antibiotics.

Merging concepts from synthetic biology and computational biology may yield antibiotics that are less likely to elicit resistance than existing drugs and that yet can fight drug-resistant infections. Indeed, computer-guided strategies coupled with massively parallel high-throughput experimental methods represent a new paradigm for antibiotic discovery. Infections caused by multidrug-resistant microorganisms are increasingly deadly. In the current post-antibiotic era, many of these infections cannot be treated with our existing antimicrobial arsenal. Furthermore, we may have already exhausted the category of large molecules produced in nature having antimicrobial activity: the antibiotic scaffolds we have discovered so far may represent the majority of those that exist. The rise in drug-resistant bacteria and lack of new antibiotic classes clearly call for out-of-the-box strategies. Recent advances in computational synthetic biology have enabled the development of antimicrobials. New molecular descriptors and genetic and pattern recognition algorithms are powerful tools that bring us a step closer to developing efficient antibiotics. We review several computational tools for drug design and a number of recently generated antibiotic candidates, with an emphasis on peptide-based molecules. Design strategies can generate a diversity of synthetic antimicrobial peptides, which may help to mitigate the spread of resistance and combat multidrug-resistant microorganisms.