RESUMEN
Smoking-related emphysema is a chronic inflammatory disease driven by the T(H)17 subset of helper T cells through molecular mechanisms that remain obscure. Here we explored the role of the microRNA miR-22 in emphysema. We found that miR-22 was upregulated in lung myeloid dendritic cells (mDCs) of smokers with emphysema and antigen-presenting cells (APCs) of mice exposed to smoke or nanoparticulate carbon black (nCB) through a mechanism that involved the transcription factor NF-κB. Mice deficient in miR-22, but not wild-type mice, showed attenuated T(H)17 responses and failed to develop emphysema after exposure to smoke or nCB. We further found that miR-22 controlled the activation of APCs and T(H)17 responses through the activation of AP-1 transcription factor complexes and the histone deacetylase HDAC4. Thus, miR-22 is a critical regulator of both emphysema and T(H)17 responses.
Asunto(s)
Enfisema/etiología , MicroARNs/genética , MicroARNs/metabolismo , Proteínas Represoras/antagonistas & inhibidores , Células Th17/inmunología , Animales , Células Presentadoras de Antígenos/inmunología , Células Presentadoras de Antígenos/metabolismo , Células Dendríticas/inmunología , Células Dendríticas/metabolismo , Modelos Animales de Enfermedad , Enfisema/inmunología , Enfisema/metabolismo , Histona Desacetilasas/metabolismo , Humanos , Pulmón/inmunología , Pulmón/metabolismo , Pulmón/patología , Ratones , Ratones Endogámicos C57BL , Ratones Noqueados , FN-kappa B/metabolismo , Fumar/efectos adversos , Hollín/toxicidad , Células Th17/metabolismo , Factor de Transcripción AP-1/metabolismoRESUMEN
Most bulk-scale graphene is produced by a top-down approach, exfoliating graphite, which often requires large amounts of solvent with high-energy mixing, shearing, sonication or electrochemical treatment1-3. Although chemical oxidation of graphite to graphene oxide promotes exfoliation, it requires harsh oxidants and leaves the graphene with a defective perforated structure after the subsequent reduction step3,4. Bottom-up synthesis of high-quality graphene is often restricted to ultrasmall amounts if performed by chemical vapour deposition or advanced synthetic organic methods, or it provides a defect-ridden structure if carried out in bulk solution4-6. Here we show that flash Joule heating of inexpensive carbon sources-such as coal, petroleum coke, biochar, carbon black, discarded food, rubber tyres and mixed plastic waste-can afford gram-scale quantities of graphene in less than one second. The product, named flash graphene (FG) after the process used to produce it, shows turbostratic arrangement (that is, little order) between the stacked graphene layers. FG synthesis uses no furnace and no solvents or reactive gases. Yields depend on the carbon content of the source; when using a high-carbon source, such as carbon black, anthracitic coal or calcined coke, yields can range from 80 to 90 per cent with carbon purity greater than 99 per cent. No purification steps are necessary. Raman spectroscopy analysis shows a low-intensity or absent D band for FG, indicating that FG has among the lowest defect concentrations reported so far for graphene, and confirms the turbostratic stacking of FG, which is clearly distinguished from turbostratic graphite. The disordered orientation of FG layers facilitates its rapid exfoliation upon mixing during composite formation. The electric energy cost for FG synthesis is only about 7.2 kilojoules per gram, which could render FG suitable for use in bulk composites of plastic, metals, plywood, concrete and other building materials.
RESUMEN
For nearly 50 years, the vision of using single molecules in circuits has been seen as providing the ultimate miniaturization of electronic chips. An advanced example of such a molecular electronics chip is presented here, with the important distinction that the molecular circuit elements play the role of general-purpose single-molecule sensors. The device consists of a semiconductor chip with a scalable array architecture. Each array element contains a synthetic molecular wire assembled to span nanoelectrodes in a current monitoring circuit. A central conjugation site is used to attach a single probe molecule that defines the target of the sensor. The chip digitizes the resulting picoamp-scale current-versus-time readout from each sensor element of the array at a rate of 1,000 frames per second. This provides detailed electrical signatures of the single-molecule interactions between the probe and targets present in a solution-phase test sample. This platform is used to measure the interaction kinetics of single molecules, without the use of labels, in a massively parallel fashion. To demonstrate broad applicability, examples are shown for probe molecule binding, including DNA oligos, aptamers, antibodies, and antigens, and the activity of enzymes relevant to diagnostics and sequencing, including a CRISPR/Cas enzyme binding a target DNA, and a DNA polymerase enzyme incorporating nucleotides as it copies a DNA template. All of these applications are accomplished with high sensitivity and resolution, on a manufacturable, scalable, all-electronic semiconductor chip device, thereby bringing the power of modern chips to these diverse areas of biosensing.
Asunto(s)
Técnicas Biosensibles/instrumentación , Electrónica/instrumentación , Pruebas de Enzimas/instrumentación , Análisis de Secuencia por Matrices de Oligonucleótidos/instrumentación , ADN , Diseño de Equipo/instrumentación , Cinética , Dispositivos Laboratorio en un Chip , Miniaturización/instrumentación , Nanotecnología/instrumentación , SemiconductoresRESUMEN
Flash Joule heating has emerged as an ultrafast, scalable, and versatile synthesis method for nanomaterials, such as graphene. Here, we experimentally and theoretically deconvolute the contributions of thermal and electrical processes to the synthesis of graphene by flash Joule heating. While traditional methods of graphene synthesis involve purely chemical or thermal driving forces, our results show that the presence of charge and the resulting electric field in a graphene precursor catalyze the formation of graphene. Furthermore, modulation of the current or the pulse width affords the ability to control the three-step phase transition of the material from amorphous carbon to turbostratic graphene and finally to ordered (AB and ABC-stacked) graphene and graphite. Finally, density functional theory simulations reveal that the presence of a charge- and current-induced electric field inside the graphene precursor facilitates phase transition by lowering the activation energy of the reaction. These results demonstrate that the passage of electrical current through a solid sample can directly drive nanocrystal nucleation in flash Joule heating, an insight that may inform future Joule heating or other electrical synthesis strategies.
RESUMEN
Solid-state batteries (SSBs) are poised to replace traditional organic liquid-electrolyte lithium-ion batteries due to their higher safety and energy density. Oxide-based solid electrolytes (SEs) are particularly attractive for their stability in air and inability to ignite during thermal runaway. However, achieving high-performance in oxide-based SSBs requires the development of an intimate and robust SE-cathode interface to overcome typically large interfacial resistances. The transition interphase should be both physically and chemically active. This study presents a thin, conductive interphase constructed between lithium aluminum titanium phosphate and lithium cobalt oxide using a rapid sintering method that modifies the interphase within 10 s. The rapid heating and cooling rates restrict side reactions and interdiffusion on the interface. SSBs with thick composite cathodes demonstrate a high initial capacity of ≈120 mAh g-1 over 200 cycles at room temperature. Furthermore, the rapid sintering method can be extended to other cathode systems under similar conditions. These findings highlight the importance of constructing an appropriate SE-cathode interface and provide insight into designing practical SSBs.
RESUMEN
Landfilling is long the most common method of disposal for municipal solid waste (MSW). However, many countries seek to implement different methods of MSW treatment due to the high global warming potential associated with landfilling. Other methods such as recycling and incineration are either limited to only a fraction of generated MSW or still produce large greenhouse gas emissions, thereby providing an unsustainable disposal method. Here, the production of graphene from treated MSW is reported that including treated wood waste, using flash Joule heating. Results indicated a 71%-83% reduction in global warming potential compared to traditional disposal methods at a net cost of -$282 of MSW, presuming the graphene is sold at just 5% of its current market value to offset the cost of the flash Joule heating process.
RESUMEN
One of the most challenging tasks in modern medicine is to find novel efficient cancer therapeutic methods with minimal side effects. The recent discovery of several classes of organic molecules known as "molecular jackhammers" is a promising development in this direction. It is known that these molecules can directly target and eliminate cancer cells with no impact on healthy tissues. However, the underlying microscopic picture remains poorly understood. We present a study that utilizes theoretical analysis together with experimental measurements to clarify the microscopic aspects of jackhammers' anticancer activities. Our physical-chemical approach combines statistical analysis with chemoinformatics methods to design and optimize molecular jackhammers. By correlating specific physical-chemical properties of these molecules with their abilities to kill cancer cells, several important structural features are identified and discussed. Although our theoretical analysis enhances understanding of the molecular interactions of jackhammers, it also highlights the need for further research to comprehensively elucidate their mechanisms and to develop a robust physical-chemical framework for the rational design of targeted anticancer drugs.
Asunto(s)
Antineoplásicos , Quimioinformática , Humanos , Antineoplásicos/farmacología , Antineoplásicos/química , Quimioinformática/métodos , Neoplasias/tratamiento farmacológico , Neoplasias/patología , Línea Celular Tumoral , Modelos MolecularesRESUMEN
An understanding of the rotary cycle of molecular motors (MMs), a key component of an approach to opening cells using mechanical motion, is important in furthering the research. Nuclear magnetic resonance (NMR) spectroscopy was used for in situ analysis of illuminated light-active MMs. We found that the presence of a N,N-dimethylethylenediamine in a position conjugated to the central olefin results in changes to the rotation of a second-generation Feringa-type MM. Importantly, the addition decreases the photostability of the compound. The parent compound 1 can withstand >2 h of illumination with no signs of decomposition, while the amino 7 decomposes after 10 min. We found that the degradation can be mitigated by implementing the simple techniques of modulating the light dose, dilution, and stirring the sample while illuminating. Additionally, the presence of moisture affects the rate of the motor's rotation. The addition of the amino group to 1, without moisture present, makes the rotation of motor 7 three times slower than the unfunctionalized parent compound. We also report the use of a method that can be used to determine the molar extinction coefficient of a light-generated metastable species. This method can be used when in situ NMR illumination is not available.
RESUMEN
Building nanostructures one-by-one requires precise control of single molecules over many manipulation steps. The ideal scenario for machine learning algorithms is complex, repetitive, and time-consuming. Here, we show a reinforcement learning algorithm that learns how to control a single dipolar molecule in the electric field of a scanning tunneling microscope. Using about 2250 iterations to train, the algorithm learned to manipulate the molecule toward specific positions on the surface. Simultaneously, it generates physical insights into the movement as well as orientation of the molecule, based on the position where the electric field is applied relative to the molecule. This reveals that molecular movement is strongly inhibited in some directions, and the torque is not symmetric around the dipole moment.
RESUMEN
Beyond the more common chemical delivery strategies, several physical techniques are used to open the lipid bilayers of cellular membranes. These include using electric and magnetic fields, temperature, ultrasound or light to introduce compounds into cells, to release molecular species from cells or to selectively induce programmed cell death (apoptosis) or uncontrolled cell death (necrosis). More recently, molecular motors and switches that can change their conformation in a controlled manner in response to external stimuli have been used to produce mechanical actions on tissue for biomedical applications. Here we show that molecular machines can drill through cellular bilayers using their molecular-scale actuation, specifically nanomechanical action. Upon physical adsorption of the molecular motors onto lipid bilayers and subsequent activation of the motors using ultraviolet light, holes are drilled in the cell membranes. We designed molecular motors and complementary experimental protocols that use nanomechanical action to induce the diffusion of chemical species out of synthetic vesicles, to enhance the diffusion of traceable molecular machines into and within live cells, to induce necrosis and to introduce chemical species into live cells. We also show that, by using molecular machines that bear short peptide addends, nanomechanical action can selectively target specific cell-surface recognition sites. Beyond the in vitro applications demonstrated here, we expect that molecular machines could also be used in vivo, especially as their design progresses to allow two-photon, near-infrared and radio-frequency activation.
Asunto(s)
Membrana Celular/metabolismo , Proteínas Motoras Moleculares/metabolismo , Animales , Membrana Celular/química , Supervivencia Celular , Difusión , Células HEK293 , Humanos , Rayos Infrarrojos , Membrana Dobles de Lípidos/química , Membrana Dobles de Lípidos/metabolismo , Ratones , Proteínas Motoras Moleculares/efectos de la radiación , Movimiento/efectos de la radiación , Células 3T3 NIH , Nanotecnología , Necrosis , Técnicas de Placa-Clamp , Fotones , Rotación , Rayos UltravioletaRESUMEN
The electrochemical dinitrogen (N2 ) reduction reaction (NRR) under ambient conditions has gained significant interest as an environmentally friendly alternative to the traditional Haber-Bosch process for the synthesis of ammonia (NH3 ). However, up to now, most of the reported NRR electrocatalysts with satisfactory catalytic activities have been hindered by the large overpotential in N2 activation. The preparation of highly efficient Mo-based NRR electrocatalyst in acidic electrolytes under ambient conditions is demonstrated here, consisting of stabilized single Mo atoms anchored on holey nitrogen-doped graphene synthesized through a convenient potassium-salt-assisted activation method. At -0.05 V versus a reversible hydrogen electrode (RHE), an electrode consisting of the resultant electrocatalyst immobilized on carbon fiber paper can attain an exceptional Faradaic efficiency of 50.2% and a NH3 yield rate of 3.6 µg h-1 mgcat-1 with low overpotentials. Density functional theory calculations further unveil that compared to the original graphene without holes, the edge coordinated Mo atoms and the existence of vacancies on holey graphene lower the overpotential of N2 reduction, thereby promoting the NRR catalytic activity. This work could provide new guidelines for future designs in single-atom catalysis that would be beneficial to ambient N2 fixation, and replacement of classical synthesis processes that are very energy-intensive.
Asunto(s)
Amoníaco , Grafito , Catálisis , Molibdeno , NitrógenoRESUMEN
Molecular motors are at the heart of cellular machinery, and they are involved in converting chemical and light energy inputs into efficient mechanical work. From a synthetic perspective, the most advanced molecular motors are rotators that are activated by light wherein a molecular subcomponent rotates unidirectionally around an axis. The mechanical work produced by arrays of molecular motors can be used to induce a macroscopic effect. Light activation offers advantages over biological chemically activated molecular motors because one can direct precise spatiotemporal inputs while conducting reactions in the gas phase, in solution and in vacuum, while generating no chemical byproducts or waste. In this review, we describe the origins of the first light-activated rotary motors and their modes of function, the structural modifications that led to newer motor designs with optimized rotary properties at variable activation wavelengths. Presented are molecular motor attachments to surfaces, their insertion into supramolecular structures and photomodulating materials, their use in catalysis, and their action in biological environments to produce exciting new prospects for biomedicine.
RESUMEN
With the desire to synthesize surface-rolling molecular machines that can be translated and rotated with extreme precision and speed, we have synthesized a series of five nanocars. Each structure features a permanent dipole moment, generated by an N,N-dimethylamino- moiety on one end of the car coupled with a nitro group on the other end. These cars are designed to be stimulated with an electric field gradient from a scanning probe microscopy tip. The nanocars all possess unexplored combinations of structural features: tert-butyl wheels, short alkyne chassis, and combination sets of wheels including one set of tert-butyl wheels and another set of larger adamantane wheels on the same car. Each of these features needs to be assessed as preparation for the second International Nanocar Race that is taking place in 2022.
RESUMEN
Two-dimensional (2D) transition metal dichalcogenide (TMDC) heterostructures have been proposed as potential candidates for a variety of applications like quantum computing, neuromorphic computing, solar cells, and flexible field effective transistors. The 2D TMDC heterostructures at the present stage face difficulties being implemented in these applications because of lack of large and sharp heterostructure interfaces. Herein, we address this problem via a CVD technique to grow thermodynamically stable heterostructure of 2H/1T' MoSe2-ReSe2 using conventional transition metal phase diagrams as a reference. We demonstrate how the thermodynamics of mixing in the MoReSe2 system during CVD growth dictates the formation of atomically sharp interfaces between MoSe2 and ReSe2, which can be confirmed by high-resolution scanning transmission electron microscopy imaging, revealing zigzag selenium-terminated interface between the epitaxial 2H and 1T' lattices. Our work provides useful insights for understanding the stability of 2D heterostructures and interfaces between chemically, structurally, and electronically different phases.
RESUMEN
Research on graphene abounds, from fundamental science to device applications. In pursuit of complementary morphologies, formation of graphene foams is often preferred over the native two-dimensional (2D) forms due to the higher available area. Graphene foams have been successfully prepared by several routes including chemical vapor deposition (CVD) methods and by wet-chemical approaches. For these methods, one often needs either high temperature furnaces and highly pure gases or large amounts of strong acids and oxidants. In 2014, using a commercial laser scribing system as found in most machine shops, a direct lasing of polyimide (PI) plastic films in the air converted the PI into 3D porous graphene, a material termed laser-induced graphene (LIG). This is a one-step method without the need for high-temperature reaction conditions, solvent, or subsequent treatments, and it affords graphene with many five-and seven-membered rings. With such an atomic arrangement, one might call LIG "kinetic graphene" since there is no annealing in the process that causes the rearrangement to the preferred all-six-membered-ring form. In this Account, we will first introduce the approaches that have been developed for making LIG and to control the morphology as either porous sheets or fibrils, and to control porosity, composition, and surface properties. The surfaces can be varied from being either superhydrophilic with a 0° contact angle with water to being superhydrophobic having >150° contact angle with water. While it was initially thought that the LIG process could only be performed on PI, it was later shown that a host of other polymeric substrates, nonpolymers, metal/plastic composites, and biodegradable and naturally occurring materials and foods could be used as platforms for generating LIG. Methods of preparation include roll-to-roll production for fabrication of in-plane electronics and two different 3D printing (additive manufacturing) routes to specific shapes of LIG monoliths using both laminated object manufacturing and powder bed fabrication methods. Use of the LIG in devices is performed very simply. This is showcased with high performance supercapacitors, fuel cell materials for oxygen reduction reactions, water splitting for both hydrogen and oxygen evolution reactions coming from the same plastic sheet, sensor devices, oil/water purification platforms, and finally applications in both passive and active biofilm inhibitors. So the ease of formation of LIG, its simple scale-up, and its utility for a range of applications highlights the easy transition of this substrate-bound graphene foam into commercial device platforms.
RESUMEN
Heteroatom-doped metal-free graphene has been widely studied as the catalyst for the oxygen reduction reaction (ORR). Depending on the preparation method and the dopants, the ORR activity varies ranging from a two-electron to a four-electron pathway. The different literature reports are difficult to correlate due to the large variances. However, due to the potential metal contamination, the origin of the ORR activity from "metal-free" graphene remains confusing and inconclusive. Here we decipher the ORR catalytic activities of diverse architectures on graphene derived from reduced graphene oxide. High angle annular dark field scanning transmission electron microscopy, X-ray absorption near edge structure, extended X-ray absorption fine structure, and trace elemental analysis methods are employed. The mechanistic origin of ORR activity is associated with the trace manganese content and reaches its highest performance at an onset potential of 0.94 V when manganese exists as a mononuclear-centered structure within defective graphene. This study exposes the deceptive role of trace metal in formerly thought to be metal-free graphene materials. It also provides insight into the design of better-performing catalyst for ORR by underscoring the coordination chemistry possible for future single-atom catalyst materials.
RESUMEN
Many diseases are associated with oxidative stress, which occurs when the production of reactive oxygen species (ROS) overwhelms the scavenging ability of an organism. Here, we evaluated the carbon nanoparticle antioxidant properties of poly(ethylene glycolated) hydrophilic carbon clusters (PEG-HCCs) by electron paramagnetic resonance (EPR) spectroscopy, oxygen electrode, and spectrophotometric assays. These carbon nanoparticles have 1 equivalent of stable radical and showed superoxide (O2 (â¢-)) dismutase-like properties yet were inert to nitric oxide (NO(â¢)) as well as peroxynitrite (ONOO(-)). Thus, PEG-HCCs can act as selective antioxidants that do not require regeneration by enzymes. Our steady-state kinetic assay using KO2 and direct freeze-trap EPR to follow its decay removed the rate-limiting substrate provision, thus enabling determination of the remarkable intrinsic turnover numbers of O2 (â¢-) to O2 by PEG-HCCs at >20,000 s(-1). The major products of this catalytic turnover are O2 and H2O2, making the PEG-HCCs a biomimetic superoxide dismutase.
Asunto(s)
Carbono/química , Interacciones Hidrofóbicas e Hidrofílicas , Oxígeno/química , Superóxidos/química , Catálisis , Espectroscopía de Resonancia por Spin del Electrón , Peróxido de Hidrógeno/metabolismo , Concentración de Iones de Hidrógeno , Radical Hidroxilo/química , Polietilenglicoles/química , Hidróxido de Sodio/química , Superóxido Dismutasa/metabolismoRESUMEN
Seamlessly connected graphene and carbon nanotube hybrids (GCNTs) have great potential as carbon platform structures in electronics due to their high conductivity and high surface area. Here, we introduce a facile method for making patterned GCNTs and their intact transfer onto other substrates. The mechanism for selective growth of vertically aligned CNTs (VA-CNTs) on the patterned graphene is discussed. The complete transfer of the GCNT pattern onto other substrates is possible because of the mechanical strength of the GCNT hybrids. Electrical conductivity measurements of the transferred GCNT structures show Ohmic contact through the VA-CNTs to graphene--evidence of its integrity after the transfer process.