RESUMEN
Accidental diesel spills can occur in marine environments such as harbors, leading to adverse effects on the environmental compartment and humans. This study proposes the surgical mask as an affordable and sustainable adsorbent for the remediation of diesel-contaminated seawater to cope with the polymeric waste generated monthly in hospital facilities. This approach can also be helpful considering a possible future pandemic, alleviating the pressure on the waste management system by avoiding improper mask incineration and landfilling, as instead occurred during the previous COVID-19. Batch adsorption-desorption experiments revealed a complete diesel removal from seawater after 120 min with the intact laceless mask, which showed an adsorption capacity of up to 3.43 g/g. The adsorption curve was better predicted via Weber and Morris's kinetic (R2 = 0.876) and, in general, with Temkin isotherm (R2 = 0.965-0.996) probably due to the occurrence of chemisorption with intraparticle diffusion as one of the rates-determining steps. A hysteresis index of 0.23-0.36 was obtained from the desorption isotherms, suggesting that diesel adsorption onto surgical masks was faster than the desorption mechanism. Also, the effect of pH, ionic strength and temperature on diesel adsorption was examined. The results from the reusability tests indicated that the surgical mask can be regenerated for 5 consecutive cycles while decreasing the adsorption capacity by only approximately 11%.
Asunto(s)
Administración de Residuos , Contaminantes Químicos del Agua , Adsorción , Concentración de Iones de Hidrógeno , Cinética , Polímeros , Agua de Mar , Termodinámica , Contaminantes Químicos del Agua/análisisRESUMEN
Food matrices contain bioactive compounds that have health benefits beyond nutritional value. The bulk of bioactive chemicals are still present in agro-industrial by-products as food matrices. Throughout the food production chain, there is a lot of agro-industrial waste that, if not managed effectively, could harm the environment, company, and how nutritiously and adequately people eat. It's important to establish processes that maximise the use of agro-industrial by-products, such as biological technologies that improve the extraction and acquisition of bioactive compounds for the food and pharmaceutical industries. As opposed to nonbiological processes, biological procedures provide high-quality, bioactive extracts with minimum toxicity and environmental impact. Fermentation and enzymatic treatment are biological processes for obtaining bioactive compounds from agro-industrial waste. In this context, this article summarises the principal bioactive components in agro-industrial byproducts and the biological methods employed to extract them. In this review efficient utilization of bioactive compounds from agro-industrial waste more effectively in food and pharmaceutical industries has been described.
RESUMEN
Owing to the increasing worldwide population explosion, managing waste generated from the food sector has become a cross-cutting issue globally, leading to environmental, economic, and social issues. Circular economy-inspired waste valorization approaches have been increasing steadily, generating new business opportunities developing valuable bioproducts using food waste, especially fruit wastes, that may have several applications in energy-food-pharma sectors. Dragon fruit waste is one such waste resource, which is rich in several value-added chemicals and oils, and can be a renewable resource to produce several value-added compounds of potential applications in different industries. Pretreatment and extraction processes in biorefineries are important strategies for recovering value-added biomolecules. There are different methods of valorization, including green extractions and biological conversion approaches. However, microbe-based conversion is one of the advanced technologies for valorizing dragon fruit waste into bioethanol, bioactive products, pharmaceuticals, and other valued products by reusing or recycling them. This state-of-the-art review briefly overviews the dragon fruit waste management strategies and advanced eco-friendly and cost-effective valorization technologies. Furthermore, various applications of different valuable bioactive components obtained from dragon fruit waste have been critically discussed concerning various industrial sectors. Several industrial sectors, such as food, pharmaceuticals, and biofuels, have been critically reviewed in detail.
RESUMEN
Selenium is targeted as a priority pollutant to be removed due to its high toxicity level and lethal effects. In this research, a novel nano sorbent was fabricated using ionic liquid on multiwalled carbon nanotubes (IL-MCNT) and employed for Selenium remediation from aqueous media. Besides solution pH, nanocomposite dosage, the initial selenium concentration, temperature and sorption time were also examined as operating variables. At optimal pH 2.0, 96% of the selenium was removed with maximum efficiency with 100 mg/L of IL-MCNT at 308 K, 45 min of contact time, and 110 g of IL-MCNT dosage. From kinetic studies, it appears that the Langmuir isotherm fits the observed data (R2 > 0.9813), supporting the hypothesis that monolayer attachment occurs. The Langmuir isotherm parameters are evaluated as qm = 125 mg/g and KL = 0.172 L/mg. As a result of testing several kinetic models, the pseudo-second-order model was the most suitable for experimental data (R2 > 0.9746). Scanning Electron Microscopy images, FTIR spectra, and thermogravimetric study were used to examine the synthesized nanomaterial.
Asunto(s)
Restauración y Remediación Ambiental , Nanotubos de Carbono , Selenio , Contaminantes Químicos del Agua , Cinética , Adsorción , Termodinámica , Concentración de Iones de HidrógenoRESUMEN
Over the decades, water contamination has increased substantially and has become a severe global issue. Degradation of natural resources is taking place at an alarming rate as a result of the use of chemicals like dyes, heavy metals, fertilizers, pesticides, and many more, necessitating the development of long-term pollution remediation methods/technologies. As a new development in the field of environmental engineering, electrodeionization incorporates both traditional ion exchange and electrodialysis. This communication provides an overview of hazardous contaminants such as dyes, heavy metals, fertilizers, and pesticides, as well as their converted forms, which are present in water. It highlights the risks of water pollutants to public health and the environment. Various electrochemical methods with a focus on electrodeionization for the treatment of wastewater and removal of hazardous contaminants are outlined in this review. Additionally, this review discusses the challenges and the future outlook for the development in this field of research.
Asunto(s)
Contaminantes Ambientales , Metales Pesados , Plaguicidas , Contaminantes Químicos del Agua , Purificación del Agua , Aguas Residuales , Fertilizantes , Plaguicidas/análisis , Medición de Riesgo , Agua , ColorantesRESUMEN
Biofilter (BF) has been regarded as a versatile gas treatment technology for removing volatile organic compounds (VOCs) from contaminated gas streams. In order for BF to be utilized in the industrial setting, it is essential to conduct research aimed at removing VOC mixtures under different inlet loading conditions, i.e. as a function of the gas flow rate and inlet VOC concentrations. The main aim of this study was to apply artificial neural networks (ANN) and determine the relationship between flow rate (FR), pressure drop (PD), inlet concentration (C), and removal efficiency (RE) in the BF treating gas-phase benzene and xylene mixtures. The ANN model was trained and tested to assess the removal efficiency of benzene (REB) and xylene (REX) under the influence of different FR, PD and C. The model's performance was assessed using a cross-validation method. The REb varied from 20% to >60%, while the REx varied from 10% to 70% during the different experimental phases of BF operation. The causal index (CI) technique was used to determine the sensitivity of the input parameters on the output variables. The ANN model with a topology of 4-4-2 performed the best in terms of predicting the RE profiles of both the pollutants. Furthermore, the effect was more pronounced for xylene because an increase in the benzene concentration reduced xylene removal (CI = -25.7170) more severely than benzene removal. An increase in the xylene concentration had a marginally positive effect on the benzene removal (CI = +0.1178).
Asunto(s)
Contaminantes Atmosféricos , Compostaje , Compuestos Orgánicos Volátiles , Benceno , Xilenos , Contaminantes Atmosféricos/análisis , Filtración , Compuestos Orgánicos Volátiles/análisis , Gases , Biodegradación AmbientalRESUMEN
Chinese medicinal herbal residues (CMHRs) are known for their antipathogenic properties due to the presence of bioactive compounds. Hence, CMHRs could be used as a potential resource to produce biofertilizer with antipathogenic properties for agricultural applications. In this study, a novel approach was used by utilizing the waste-derived biofertilizer, i.e., CMHRs compost (CMHRC) as a nutrient supplier as well as an organic bioagent against Alternaria solani (A. solani) and Fusarium oxysporum (F. oxysporum) on tomato (Lycopersicon esculentum) and Chinese cabbage (Brassica rapa subsp. Chinensis) plants. The experiments were conducted under greenhouse conditions using locally collected acidic soil wherein 2%, 5% and 10% CMHRC (dry weight) along with 5% food waste compost were used as treatments. In addition, only soil and soil with phytopathogens were used as control treatments. The results suggested that amending the compost into acidic soil significantly increased the pH to a neutral level along with enhanced uptake of nutrients. Among all the treatments, 5% CMHRs compost addition increased the tomato plant biomass production to 4.9 g/pot (dry weight) compared to 2.2 g/pot in control. A similar trend was observed in Chinese cabbage plants and the improved plant biomass production could be attributed to the combined effect of strong nutrient absorption ability by healthy roots and enhanced nutrient supply. At 5% CMHRC application rate, the nitrogen uptake by tomato and Chinese cabbage plants increased by 78% and 62%, respectively, whereas phosphorous uptake increased by 75% and 25%, respectively. The reduction in A. solani by 48% and F. oxysporum by 54% in the post-harvested soil of 5% CMHRC treatment against the control demonstrated the anti-phytopathogenic efficiency of CMHRC compost. Hence, the present study illustrates the beneficiary aspects of utilizing CMHRs to produce biofertilizer with anti-phytopathogenic properties which can be safely used for tomato and Chinese cabbage plant growth.
Asunto(s)
Brassica , Compostaje , Eliminación de Residuos , Solanum lycopersicum , Alimentos , Suelo , Plantas , Nutrientes , ChinaRESUMEN
The World Health Organization (WHO) recognised variant B.1.1.529 of the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) as a variant of concern, termed "Omicron", on November 26, 2021. Its diffusion was attributed to its several mutations, which allow promoting its ability to diffuse worldwide and its capability in immune evasion. As a consequence, some additional serious threats to public health posed the risk to undermine the global efforts made in the last two years to control the pandemic. In the past, several works were devoted to discussing a possible contribution of air pollution to the SARS-CoV-2 spread. However, to the best of the authors' knowledge, there are still no works dealing with the Omicron variant diffusion mechanisms. This work represents a snapshot of what we know right now, in the frame of an analysis of the Omicron variant spread. The paper proposes the use of a single indicator, commercial trade data, to model the virus spread. It is proposed as a surrogate of the interactions occurring between humans (the virus transmission mechanism due to human-to-human contacts) and could be considered for other diseases. It allows also to explain the unexpected increase in infection cases in China, detected at beginning of 2023. The air quality data are also analyzed to evaluate for the first time the role of air particulate matter (PM) as a carrier of the Omicron variant diffusion. Due to emerging concerns associated with other viruses (such as smallpox-like virus diffusion in Europe and America), the proposed approach seems to be promising to model the virus spreading.
Asunto(s)
Contaminación del Aire , COVID-19 , Humanos , COVID-19/epidemiología , SARS-CoV-2 , ChinaRESUMEN
As indicated in the call for papers posted for this Special Issue, Soil Science deals with various environmental compartments, so it is closely related to Environmental Research. It is clear that synergisms and collaboration are keys to reach the most fruitful relations among different sciences and scientists, and especially in all that focused on the Environment. In this line, considering Soil Science, Environmental Research, and the multiple and complex eventual combinations involving them, could give new highly interesting works focused on any of the specific subjects covered, as well as on relations among these sciences. The main objective should be going further in positive interactions that could help in protecting the Environment, proposing solutions to face hazards that are drastically threatening our planet. In view of that, the Editors of this Special Issue invited researchers to submit high-quality manuscripts including new experimental data, as well as scientifically founded discussion and reflections on the matter. The VSI has received 171 submissions, with 27% of them being accepted after peer-review. The Editors think that the papers included in this VSI have high scientific value and provide scientific knowledge on the field. In this editorial piece the Editors include comments and reflections on the papers published in the SI.
RESUMEN
The rigid lignocellulosic structure of Lantana camara impedes the hydrolysis phase and reduces the biogas production during anaerobic digestion of Lantana camara. Hence, the current study focuses on the impact of various heating pretreatment techniques, viz., hot air oven (HAO), autoclave (ATC), hot water bath (HWB), and microwave (MCW) on L. camara to speed up hydrolysis and boost up biogas production. ATC pretreatment of L. camara was witnessed to be most efficient compared to HAO, MCW, and HWB pretreatment. ATC pretreatment enhanced the solubilization (45.44%), and an increment in volatile fatty acids (VFA) was observed (56.75%) at 110 °C for 80 min when correlated to the untreated (control). Cumulative methane production following ATC pretreatment had risen to 3656 mL in 5 weeks from 2895 mL in 7 weeks. Thermal pretreatment of Lantana camara broke down the rigid lignocellulosic structure, accelerating the hydrolysis stage and improving biogas production simultaneously. To the best of our knowledge, this is the first thermal pretreatment study conducted on Lantana camara for biogas production.
Asunto(s)
Biocombustibles , Lantana , Hidrólisis , Microondas , CalefacciónRESUMEN
"Save Soil Save Earth" is not just a catchphrase; it is a necessity to protect soil ecosystem from the unwanted and unregulated level of xenobiotic contamination. Numerous challenges such as type, lifespan, nature of pollutants and high cost of treatment has been associated with the treatment or remediation of contaminated soil, whether it be either on-site or off-site. Due to the food chain, the health of non-target soil species as well as human health were impacted by soil contaminants, both organic and inorganic. In this review, the use of microbial omics approaches and artificial intelligence or machine learning has been comprehensively explored with recent advancements in order to identify the sources, characterize, quantify, and mitigate soil pollutants from the environment for increased sustainability. This will generate novel insights into methods for soil remediation that will reduce the time and expense of soil treatment.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Humanos , Ecosistema , Inteligencia Artificial , Contaminación Ambiental/prevención & control , Metales Pesados/análisis , Contaminantes del Suelo/toxicidad , Contaminantes del Suelo/análisis , SueloRESUMEN
Astaxanthin (3,3-dihydroxy-ß, ß-carotene-4,4-dione) is a ketocarotenoid synthesized by Haematococcus pluvialis/lacustris, Chromochloris zofingiensis, Chlorococcum, Bracteacoccus aggregatus, Coelastrella rubescence, Phaffia rhodozyma, some bacteria (Paracoccus carotinifaciens), yeasts, and lobsters, among others However, it is majorly synthesized by Haematococcus lacustris alone (about 4%). The richness of natural astaxanthin over synthetic astaxanthin has drawn the attention of industrialists to cultivate and extract it via two stage cultivation process. However, the cultivation in photobioreactors is expensive, and converting it in soluble form so that it can be easily assimilated by our digestive system requires downstream processing techniques which are not cost-effective. This has made the cost of astaxanthin expensive, prompting pharmaceutical and nutraceutical companies to switch over to synthetic astaxanthin. This review discusses the chemical character of astaxanthin, more inexpensive cultivating techniques, and its bioavailability. Additionally, the antioxidant character of this microalgal product against many diseases is discussed, which can make this natural compound an excellent drug to minimize inflammation and its consequences.
Asunto(s)
Antioxidantes , Chlorophyceae , Antioxidantes/farmacología , Disponibilidad Biológica , Xantófilas/farmacología , Xantófilas/química , CarotenoidesRESUMEN
In this study, a five-factorial central composite design was employed to optimize pectin extraction from novel source, through ultrasound-assisted extraction. A 35.58% yield was obtained under optimized conditions of pH 1.0, solid (g): liquid (mL) ratio 1:24, amplitude 84.2 Hz, duty cycle 23 s/30 s, and time 30 min. The equivalent weight, methoxyl content, anhydrouronic acid content, degree of esterification, water-holding capacity, and oil-holding capacity of the extracted pectin were 796.40 ± 2.07, 8.29 ± 0.38%, 71.32 ± 0.54%, 64.66 ± 2.08%, 8.04 ± 0.10 g water/g pectin, and 2.24 ± 030 g oil/g pectin, respectively. The chemical profile of the extracted pectin was assessed with FTIR and NMR analyses. The extracted pectin was utilized as a butter substitute in cookies. Up to 30% butter in cookies could be replaced with the extracted pectin without altering the sensory and physicochemical properties. Overall, results of presented work suggest that using waste-derived pectin as a fat substitute in cookies offers a sustainable and health-promoting approach for converting waste into wealth.
RESUMEN
Machine learning techniques were employed to evaluate the effect of process parameters viz. microwave power (100 W, 300 W, 600 W); pH (1, 1.5, 2); and microwave time (the 60 s, 120 s, 180 s) on the pectin yield from Citrus limetta peel. A fourth-order polynomial function of 66.60 scales was used by the Support Vector Regression (SVR) model at an epsilon (ε) value of 0.003. The co-efficient of determination (R2) and root mean square error-values for training data and test data were 0.984; 0.77 and 0.993; 0.66 respectively. At optimized conditions, microwave power 600 W, pH 1, and time 180 s the best yield of 32.75% was obtained. The integrity of pectin skeletal was confirmed with FTIR and 1H NMR spectrums. The physicochemical analysis revealed that CLP is a high-methoxyl pectin (HMP) with a 63.20 ± 0.88% degree of esterification, 798.45 ± 26.15 equivalent weight, 8.06 ± 0.62% methoxyl content, 67.93 ± 3.36 AUA content, 6.27 ± 0.27 g water/g pectin WHC, 2.68 ± 0.20 g oil/g pectin OHC, low moisture, ash and protein content of 6.85 ± 0.10%, 3.87 ± 0.10% and 2.61 ± 0.06% respectively, which can be utilized as a food additive. Therefore, pectin extraction from Citrus limetta peel using a greener technique like MAE is an eco-friendly, time-saving approach to transform waste into a versatile food additive.
RESUMEN
Large-scale food waste (FW) disposal has resulted in severe environmental degradation and financial losses around the world. Although FW has a high biomass energy contents and a growing large number of national projects to recover energy from FW by anaerobic digestion (AD) are being developed. AD is a promising solution for FW management and energy generation when compared to typical disposal options including landfill disposal, incineration, and composting. AD of FW can be combined with an existing AD operation or linked to the manufacture of value-added products to reduce costs and increase income. AD is a metabolic process that requires four different types of microbes: hydrolyzers, acidogens, acetogens, and methanogens. Microbes use a variety of strategies to avoid difficult situations in the AD, such as competition for the same substrate between sulfate-reducing bacteria and methane-forming bacteria. An improved comprehension of the microbiology involved in the anaerobic digestion of FW will provide new insight into the circumstances needed to maximize this procedure, including its possibilities for use in co-digestion mechanisms. This paper reviewed the present scientific knowledge of microbial community during the AD and the connection between microbial diversity during the AD of FW.
RESUMEN
Nutraceuticals have attained substantial attention due to their health-boosting or disease-prevention characteristics. Growing awareness about the potential of nutraceuticals for the prevention and management of diseases affecting human has led to an increase in the market value of nutraceuticals in several billion dollars. Nevertheless, limitations in supply and isolation complications from plants, animals or fungi, limit the large-scale production of nutraceuticals. Microbial engineering at metabolic level has been proved as an environment friendly substitute for the chemical synthesis of nutraceuticals. Extensively used microbial systems such as E. coli and S. cerevisiae have been modified as versatile cell factories for the synthesis of diverse nutraceuticals. This review describes current interventions in metabolic engineering for synthesising some of the therapeutically important nutraceuticals (phenolic compounds, polyunsaturated fatty acids and carotenoids). We focus on the interventions in enhancing product yield through engineering at gene level or pathway level.
RESUMEN
Pullulan is a commercially available exopolymer biosynthesized by Aureobasidium pullulans supplemented with nitrogen, carbon and other vital components through submerged and solid-state fermentation. These nutrients are very expensive and it raises the cost for the production of pullulan. Hence, the need of alternative cost-effective raw materials for its production is a prerequisite. Owing to its unique physicochemical features, pullulan has various applications in the food, pharmacological, and biomedical domains. Food industrial wastes generate a considerable number of by-products which accumulates and has a negative influence on the environment. These by-products are made up of proteins, carbohydrates, and other components, can be employed as substrates for the production of pullulan. The present review briefs on the pullulan production using food processing waste and by-products and the elements that impact it. It provides an insight into versatile applications of pullulan in food industries. Various challenges and future prospects in the field of research on pullulan production have been uncovered.
RESUMEN
Contamination of the environment with heavy metals (HMs) has led to huge global environmental issues. Industrialization activities such as mining, manufacturing, and construction generate massive amounts of toxic waste, posing environmental risks. HMs soil pollution causes a variety of environmental issues and has a detrimental effect on both animals and plants. To remove HMs from the soil, traditional physico-chemical techniques such as immobilization, electro-remediation, stabilization, and chemical reduction are used. Moreover, the high energy, trained manpower, and hazardous chemicals required by these methods make them expensive and non-environmentally friendly. Bioremediation process, which involves microorganism-based and microorganism-associated-plant-based approaches, is an ecologically sound and cost-effective strategy for restoring HMs polluted soil. Microbes adjust their physiology to these conditions to live, which can involve significant variations in the expression of the genes. A set of genes are activated in response to toxic metals in microbes. They can also adapt by modifying their shape, fruiting bodies creating biofilms, filaments, or chemotactically migrating away from stress chemicals. Microbes including Bacillus sp., Pseudomonas sp., and Aspergillus sp. has been found to have high metals remediation and tolerance capacity of up to 98% whether isolated or in combination with plants like Helianthus annuus, Trifolium repens, and Vallisneria denseserrulata. Several of the regulatory systems that have been discovered are unique, but there is also a lot of "cross-talk" among networks. This review discusses the current state of knowledge regarding the microbial signaling responses, and the function of microbes in HMs stress resistance.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Biodegradación Ambiental , Expresión Génica , Metales Pesados/análisis , Plantas/metabolismo , Suelo/química , Contaminantes del Suelo/análisisRESUMEN
Due to the development in science field which gives not only benefit but also introducesundesirable pollution to the environment. This pollution is due to poor discharge activities of industrial effluents into the soil and water bodies, surface run off from fields of agricultural lands, dumping of untreated wastes by municipalities, and mining activites, which deteriorates the cardinal virtue of our environment and causes menace to human health and life. Heavy metal(s), a natural constituent on earth's crust and economic important mineral, due to its recalcitrant effects creates heavy metal pollution which affects food chain and also reduces the quality of water. For this, many researchers have performed studies to find efficient methods for wastewater remediation. One of the most promising methods from economic point of view is adsorption, which is simple in design, but leads to use of a wide range of adsorbents and ease of operations. Due to advances in nanotechnology, many nanomaterials were used as adsorbents for wastewater remediation, because of their efficiency. Many researchers have reported that nanoadsorbents are unmitigatedly a fruitful solution to address this world's problem. This review presents a potent view on various classes of nanoadsorbents and their application to wastewater treatment. It provides a bird's eye view of the suitability of different types of nanomaterials for remediation of wastewater and Backspace gives up-to-date information about polymer based and silica-based nanoadsorbents.
Asunto(s)
Metales Pesados , Contaminantes Químicos del Agua , Purificación del Agua , Adsorción , Humanos , Metales Pesados/análisis , Aguas Residuales/análisis , Contaminantes Químicos del Agua/análisisRESUMEN
Potentially toxic elements (PTEs) such as toxic metal (loid)s and other emerging hazardous contaminants, exist in the environment and poses a serious threat. A large amount of wastewater containing PTEs such as cadmium, chromium, copper, nickel, arsenic, lead, zinc, etc. Release from industries during production process. Besides these, chemical-based fertilizers used in soils during crop production have become one of the crucial sources of PTEs. Various techniques are being employed for the mitigation of PTEs like chemical precipitation, ion exchange, coagulation, activated carbon, adsorption, membrane filtration, and bioremediation. Among these mitigation strategies, biological processes such as bioremediation, phytoremediation etc. Are extensively used, as they are economic have high-efficiency rate and are eco-friendly. This review intends to provide information on PTEs contamination through various sources; along with the toxicity of metal (loid)s with respect to their patterns of transmission and risks in the changing environment. Various remediation methods for the management of these pollutants along with their techno-economic perspective are also summarized in this review.