RESUMEN
Electrostriction is a property of dielectric materials whereby an applied electric field induces a mechanical deformation proportional to the square of that field. The magnitude of the effect is usually minuscule (<10-19 m2 V-2 for simple oxides). However, symmetry-breaking phenomena at the interfaces can offer an efficient strategy for the design of new properties1,2. Here we report an engineered electrostrictive effect via the epitaxial deposition of alternating layers of Gd2O3-doped CeO2 and Er2O3-stabilized δ-Bi2O3 with atomically controlled interfaces on NdGaO3 substrates. The value of the electrostriction coefficient achieved is 2.38 × 10-14 m2 V-2, exceeding the best known relaxor ferroelectrics by three orders of magnitude. Our theoretical calculations indicate that this greatly enhanced electrostriction arises from coherent strain imparted by interfacial lattice discontinuity. These artificial heterostructures open a new avenue for the design and manipulation of electrostrictive materials and devices for nano/micro actuation and cutting-edge sensors.
Asunto(s)
Óxidos , Óxidos/químicaRESUMEN
Strain-free GaAs/AlGaAs semiconductor quantum dots (QDs) grown by droplet etching and nanohole infilling (DENI) are highly promising candidates for the on-demand generation of indistinguishable and entangled photon sources. The spectroscopic fingerprint and quantum optical properties of QDs are significantly influenced by their morphology. The effects of nanohole geometry and infilled material on the exciton binding energies and fine structure splitting are well-understood. However, a comprehensive understanding of GaAs/AlGaAs QD morphology remains elusive. To address this, we employ high-resolution scanning transmission electron microscopy (STEM) and reverse engineering through selective chemical etching and atomic force microscopy (AFM). Cross-sectional STEM of uncapped QDs reveals an inverted conical nanohole with Al-rich sidewalls and defect-free interfaces. Subsequent selective chemical etching and AFM measurements further reveal asymmetries in element distribution. This study enhances the understanding of DENI QD morphology and provides a fundamental three-dimensional structural model for simulating and optimizing their optoelectronic properties.
RESUMEN
Metal halide perovskites (MHP) are highly promising semiconductors. In this study, we focus on FAPbBr3 nanocrystals, which are of great interest for green light-emitting diodes. Structural parameters significantly impact the properties of MHPs and are linked to phase instability, which hampers long-term applications. Clearly, there is a need for local and precise characterization techniques at the atomic scale, such as transmission electron microscopy. Because of the high electron beam sensitivity of MHPs, these investigations are extremely challenging. Here, we applied a low-dose method based on four-dimensional scanning transmission electron microscopy. We quantified the observed elongation of the projections of the Br atomic columns, suggesting an alternation in the position of the Br atoms perpendicular to the Pb-Br-Pb bonds. Together with molecular dynamics simulations, these results remarkably reveal local distortions in an on-average cubic structure. Additionally, this study provides an approach to prospectively investigating the fundamental degradation mechanisms of MHPs.
RESUMEN
Semiparametric probabilistic index models allow for the comparison of two groups of observations, whilst adjusting for covariates, thereby fitting nicely within the framework of generalized pairwise comparisons (GPC). As with most regression approaches in this setting, the limited amount of data results in invalid inference as the asymptotic normality assumption is not met. In addition, separation issues might arise when considering small samples. In this article, we show that the parameters of the probabilistic index model can be estimated using generalized estimating equations, for which adjustments exist that lead to estimators of the sandwich variance-covariance matrix with improved finite sample properties and that can deal with bias due to separation. In this way, appropriate inference can be performed as is shown through extensive simulation studies. The known relationships between the probabilistic index and other GPC statistics allow to also provide valid inference for example, the net treatment benefit or the success odds.
Asunto(s)
Simulación por Computador , Modelos Estadísticos , Humanos , Tamaño de la Muestra , Interpretación Estadística de Datos , SesgoRESUMEN
Ordinal data in a repeated measures design of a crossover study for rare diseases usually do not allow for the use of standard parametric methods, and hence, nonparametric methods should be considered instead. However, only limited simulation studies in settings with small sample sizes exist. Therefore, starting from an Epidermolysis Bullosa simplex trial with the above-mentioned design, a rank-based approach using the R package nparLD and different generalized pairwise comparisons (GPC) methods were compared impartially in a simulation study. The results revealed that there was not one single best method for this particular design, because a trade-off exists between achieving high power, accounting for period effects, and for missing data. Specifically, nparLD as well as the unmatched GPC approaches do not address crossover aspects, and the univariate GPC variants partly ignore the longitudinal information. The matched GPC approaches, on the other hand, take the crossover effect into account in the sense of incorporating the within-subject association. Overall, the prioritized unmatched GPC method achieved the highest power in the simulation scenarios, although this may be due to the specified prioritization. The rank-based approach yielded good power even at a sample size of N = 6 $N=6$ , whereas the matched GPC method could not control the type I error.
Asunto(s)
Enfermedades Raras , Proyectos de Investigación , Humanos , Enfermedades Raras/epidemiología , Estudios Cruzados , Simulación por Computador , Tamaño de la MuestraRESUMEN
The control of the Mott phase is intertwined with the spatial reorganization of the electronic states. Out-of-equilibrium driving forces typically lead to electronic patterns that are absent at equilibrium, whose nature is however often elusive. Here, we unveil a nanoscale pattern formation in the Ca2RuO4 Mott insulator. We demonstrate how an applied electric field spatially reconstructs the insulating phase that, uniquely after switching off the electric field, exhibits nanoscale stripe domains. The stripe pattern has regions with inequivalent octahedral distortions that we directly observe through high-resolution scanning transmission electron microscopy. The nanotexture depends on the orientation of the electric field; it is nonvolatile and rewritable. We theoretically simulate the charge and orbital reconstruction induced by a quench dynamics of the applied electric field providing clear-cut mechanisms for the stripe phase formation. Our results open the path for the design of nonvolatile electronics based on voltage-controlled nanometric phases.
RESUMEN
In the COVID-19 pandemic, workplace transmission plays an important role. For this type of transmission, the longitudinal 14-day incidence curve of SARS-CoV-2 infections per economic sector is a proxy. In Belgium, a census of confirmed 14-day incidences per NACE-BEL sector level three is available from September 2020 until June 2021, encompassing two waves of infections. However, these high-dimensional data, with a relatively small number of NACE-BEL sectors, are challenging to analyze. We propose a nonlinear Gaussian-Gaussian model that combines parametric and semi-parametric elements to describe the incidence curves with a small set of meaningful parameters. These parameters are further analyzed with conventional statistical methods, such as CCA and linear models, to provide insight into predictive characteristics of the first wave for the second wave. Those nonlinear models classify economic sectors into three groups: sectors with two regular waves of infections, sectors with only a first wave and sectors with a more irregular profile, which may indicate a clear effect of COVID-19 vaccination. The Gaussian-Gaussian model thus allows for analyzing and comparing incidence curves and to bring out key characteristics of such curves. Finally, we consider in which other settings the proposed approach could be applied, together with possible pitfalls.
Asunto(s)
COVID-19 , Humanos , COVID-19/epidemiología , COVID-19/prevención & control , Incidencia , SARS-CoV-2 , Pandemias/prevención & control , Vacunas contra la COVID-19 , VacunaciónRESUMEN
The Corona Virus Disease (COVID-19) pandemic has increased mortality in countries worldwide. To evaluate the impact of the pandemic on mortality, the use of excess mortality rather than reported COVID-19 deaths has been suggested. Excess mortality, however, requires estimation of mortality under nonpandemic conditions. Although many methods exist to forecast mortality, they are either complex to apply, require many sources of information, ignore serial correlation, and/or are influenced by historical excess mortality. We propose a linear mixed model that is easy to apply, requires only historical mortality data, allows for serial correlation, and down-weighs the influence of historical excess mortality. Appropriateness of the linear mixed model is evaluated with fit statistics and forecasting accuracy measures for Belgium and the Netherlands. Unlike the commonly used 5-year weekly average, the linear mixed model is forecasting the year-specific mortality, and as a result improves the estimation of excess mortality for Belgium and the Netherlands.
Asunto(s)
COVID-19 , Humanos , Modelos Lineales , PandemiasRESUMEN
To optimize the use of data from a small number of subjects in rare disease trials, an at first sight advantageous design is the repeated measures cross-over design. However, it is unclear how these within-treatment period and within-subject clustered data are best analyzed in small-sample trials. In a real-data simulation study based upon a recent epidermolysis bullosa simplex trial using this design, we compare non-parametric marginal models, generalized pairwise comparison models, GEE-type models and parametric model averaging for both repeated binary and count data. The recommendation of which methodology to use in rare disease trials with a repeated measures cross-over design depends on the type of outcome and the number of time points the treatment has an effect on. The non-parametric marginal model testing the treatment-time-interaction effect is suitable for detecting between group differences in the shapes of the longitudinal profiles. For binary outcomes with the treatment effect on a single time point, the parametric model averaging method is recommended, while in the other cases the unmatched generalized pairwise comparison methodology is recommended. Both provide an easily interpretable effect size measure, and do not require exclusion of periods or subjects due to incompleteness.
Asunto(s)
Modelos Estadísticos , Enfermedades Raras , Humanos , Estudios Cruzados , Interpretación Estadística de Datos , Proyectos de InvestigaciónRESUMEN
Generalized pairwise comparisons and win statistics (i.e., win ratio, win odds and net benefit) are advantageous in analyzing and interpreting a composite of multiple outcomes in clinical trials. An important limitation of these statistics is their inability to adjust for covariates other than by stratified analysis. Because the win ratio does not account for ties, the win odds, a modification that includes ties, has attracted attention. We review and combine information on the win odds to articulate the statistical inferences for the win odds. We also show alternative variance estimators based on the exact permutation and bootstrap as well as statistical inference via the probabilistic index. Finally, we extend multiple-covariate regression probabilistic index models to the win odds with a univariate outcome. As an illustration we apply the regression models to the data in the CHARM trial.
Asunto(s)
Modelos Estadísticos , Humanos , Interpretación Estadística de DatosRESUMEN
Conventional analyses of a composite of multiple time-to-event outcomes use the time to the first event. However, the first event may not be the most important outcome. To address this limitation, generalized pairwise comparisons and win statistics (win ratio, win odds, and net benefit) have become popular and have been applied to clinical trial practice. However, win ratio, win odds, and net benefit have typically been used separately. In this article, we examine the use of these three win statistics jointly for time-to-event outcomes. First, we explain the relation of point estimates and variances among the three win statistics, and the relation between the net benefit and the Mann-Whitney U statistic. Then we explain that the three win statistics are based on the same win proportions, and they test the same null hypothesis of equal win probabilities in two groups. We show theoretically that the Z-values of the corresponding statistical tests are approximately equal; therefore, the three win statistics provide very similar p-values and statistical powers. Finally, using simulation studies and data from a clinical trial, we demonstrate that, when there is no (or little) censoring, the three win statistics can complement one another to show the strength of the treatment effect. However, when the amount of censoring is not small, and without adjustment for censoring, the win odds and the net benefit may have an advantage for interpreting the treatment effect; with adjustment (e.g., IPCW adjustment) for censoring, the three win statistics can complement one another to show the strength of the treatment effect. For calculations we use the R package WINS, available on the CRAN (Comprehensive R Archive Network).
Asunto(s)
Simulación por Computador , Humanos , ProbabilidadRESUMEN
The method of generalized pairwise comparisons (GPC) is an extension of the well-known nonparametric Wilcoxon-Mann-Whitney test for comparing two groups of observations. Multiple generalizations of Wilcoxon-Mann-Whitney test and other GPC methods have been proposed over the years to handle censored data. These methods apply different approaches to handling loss of information due to censoring: ignoring noninformative pairwise comparisons due to censoring (Gehan, Harrell, and Buyse); imputation using estimates of the survival distribution (Efron, Péron, and Latta); or inverse probability of censoring weighting (IPCW, Datta and Dong). Based on the GPC statistic, a measure of treatment effect, the "net benefit," can be defined. It quantifies the difference between the probabilities that a randomly selected individual from one group is doing better than an individual from the other group. This paper aims at evaluating GPC methods for censored data, both in the context of hypothesis testing and estimation, and providing recommendations related to their choice in various situations. The methods that ignore uninformative pairs have comparable power to more complex and computationally demanding methods in situations of low censoring, and are slightly superior for high proportions (>40%) of censoring. If one is interested in estimation of the net benefit, Harrell's c index is an unbiased estimator if the proportional hazards assumption holds. Otherwise, the imputation (Efron or Peron) or IPCW (Datta, Dong) methods provide unbiased estimators in case of proportions of drop-out censoring up to 60%.
Asunto(s)
Proyectos de Investigación , Probabilidad , Simulación por Computador , Análisis de SupervivenciaRESUMEN
Van der Waals (vdW) heterostructures continue to attract intense interest as a route of designing materials with novel properties that cannot be found in nature. Unfortunately, this approach is currently limited to only a few layers that can be stacked on top of each other. Here, we report a bulk vdW material consisting of superconducting 1H TaS2 monolayers interlayered with 1T TaS2 monolayers displaying charge density waves (CDW). This bulk vdW heterostructure is created by phase transition of 1T-TaS2 to 6R at 800 °C in an inert atmosphere. Its superconducting transition (Tc) is found at 2.6 K, exceeding the Tc of the bulk 2H phase. Using first-principles calculations, we argue that the coexistence of superconductivity and CDW within 6R-TaS2 stems from amalgamation of the properties of adjacent 1H and 1T monolayers, where the former dominates the superconducting state and the latter the CDW behavior.
RESUMEN
BackgroundCOVID-19 mortality, excess mortality, deaths per million population (DPM), infection fatality ratio (IFR) and case fatality ratio (CFR) are reported and compared for many countries globally. These measures may appear objective, however, they should be interpreted with caution.AimWe examined reported COVID-19-related mortality in Belgium from 9 March 2020 to 28 June 2020, placing it against the background of excess mortality and compared the DPM and IFR between countries and within subgroups.MethodsThe relation between COVID-19-related mortality and excess mortality was evaluated by comparing COVID-19 mortality and the difference between observed and weekly average predictions of all-cause mortality. DPM were evaluated using demographic data of the Belgian population. The number of infections was estimated by a stochastic compartmental model. The IFR was estimated using a delay distribution between infection and death.ResultsIn the study period, 9,621 COVID-19-related deaths were reported, which is close to the excess mortality estimated using weekly averages (8,985 deaths). This translates to 837 DPM and an IFR of 1.5% in the general population. Both DPM and IFR increase with age and are substantially larger in the nursing home population.DiscussionDuring the first pandemic wave, Belgium had no discrepancy between COVID-19-related mortality and excess mortality. In light of this close agreement, it is useful to consider the DPM and IFR, which are both age, sex, and nursing home population-dependent. Comparison of COVID-19 mortality between countries should rather be based on excess mortality than on COVID-19-related mortality.
Asunto(s)
COVID-19 , Bélgica/epidemiología , Humanos , Mortalidad , Casas de Salud , Pandemias , SARS-CoV-2RESUMEN
A real-time image reconstruction method for scanning transmission electron microscopy (STEM) is proposed. With an algorithm requiring only the center of mass of the diffraction pattern at one probe position at a time, it is able to update the resulting image each time a new probe position is visited without storing any intermediate diffraction patterns. The results show clear features at high spatial frequency, such as atomic column positions. It is also demonstrated that some common post-processing methods, such as band-pass filtering, can be directly integrated in the real-time processing flow. Compared with other reconstruction methods, the proposed method produces high-quality reconstructions with good noise robustness at extremely low memory and computational requirements. An efficient, interactive open source implementation of the concept is further presented, which is compatible with frame-based, as well as event-based camera/file types. This method provides the attractive feature of immediate feedback that microscope operators have become used to, for example, conventional high-angle annular dark field STEM imaging, allowing for rapid decision-making and fine-tuning to obtain the best possible images for beam-sensitive samples at the lowest possible dose.
RESUMEN
The properties of correlated oxides can be manipulated by forming short-period superlattices since the layer thicknesses are comparable with the typical length scales of the involved correlations and interface effects. Herein, we studied the metal-insulator transitions (MITs) in tetragonal NdNiO3/SrTiO3 superlattices by controlling the NdNiO3 layer thickness, n in the unit cell, spanning the length scale of the interfacial octahedral coupling. Scanning transmission electron microscopy reveals a crossover from a modulated octahedral superstructure at n = 8 to a uniform nontilt pattern at n = 4, accompanied by a drastically weakened insulating ground state. Upon further reducing n the predominant dimensionality effect continuously raises the MIT temperature, while leaving the antiferromagnetic transition temperature unaltered down to n = 2. Remarkably, the MIT can be enhanced by imposing a sufficiently large strain even with strongly suppressed octahedral rotations. Our results demonstrate the relevance for the control of oxide functionalities at reduced dimensions.
RESUMEN
In transition metal perovskites ABO3, the physical properties are largely driven by the rotations of the BO6 octahedra, which can be tuned in thin films through strain and dimensionality control. However, both approaches have fundamental and practical limitations due to discrete and indirect variations in bond angles, bond lengths, and film symmetry by using commercially available substrates. Here, we introduce modulation tilt control as an approach to tune the ground state of perovskite oxide thin films by acting explicitly on the oxygen octahedra rotation modes-that is, directly on the bond angles. By intercalating the prototype SmNiO3 target material with a tilt-control layer, we cause the system to change the natural amplitude of a given rotation mode without affecting the interactions. In contrast to strain and dimensionality engineering, our method enables a continuous fine-tuning of the materials' properties. This is achieved through two independent adjustable parameters: the nature of the tilt-control material (through its symmetry, elastic constants, and oxygen rotation angles), and the relative thicknesses of the target and tilt-control materials. As a result, a magnetic and electronic phase diagram can be obtained, normally only accessible by A-site element substitution, within the single SmNiO3 compound. With this unique approach, we successfully adjusted the metal-insulator transition (MIT) to room temperature to fulfill the desired conditions for optical switching applications.
RESUMEN
For composite outcomes whose components can be prioritized on clinical importance, the win ratio, the net benefit and the win odds apply that order in comparing patients pairwise to produce wins and subsequently win proportions. Because these three statistics are derived using the same win proportions and they test the same hypothesis of equal win probabilities in the two treatment groups, we refer to them as win statistics. These methods, particularly the win ratio and the net benefit, have received increasing attention in methodological research and in design and analysis of clinical trials. For time-to-event outcomes, however, censoring may introduce bias. Previous work has shown that inverse-probability-of-censoring weighting (IPCW) can correct the win ratio for bias from independent censoring. The present article uses the IPCW approach to adjust win statistics for dependent censoring that can be predicted by baseline covariates and/or time-dependent covariates (producing the CovIPCW-adjusted win statistics). Theoretically and with examples and simulations, we show that the CovIPCW-adjusted win statistics are unbiased estimators of treatment effect in the presence of dependent censoring.
Asunto(s)
Proyectos de Investigación , Sesgo , Simulación por Computador , Interpretación Estadística de Datos , Humanos , ProbabilidadRESUMEN
Following an extensive investigation of various monolayer transition metal dichalcogenides (MX2), research interest has expanded to include multilayer systems. In bilayer MX2, the stacking order strongly impacts the local band structure as it dictates the local confinement and symmetry. Determination of stacking order in multilayer MX2 domains usually relies on prior knowledge of in-plane orientations of constituent layers. This is only feasible in case of growth resulting in well-defined triangular domains and not useful in-case of closed layers with hexagonal or irregularly shaped islands. Stacking order can be discerned in the reciprocal space by measuring changes in diffraction peak intensities. Advances in detector technology allow fast acquisition of high-quality four-dimensional datasets which can later be processed to extract useful information such as thickness, orientation, twist and strain. Here, we use 4D scanning transmission electron microscopy combined with multislice diffraction simulations to unravel stacking order in epitaxially grown bilayer MoS2. Machine learning based data segmentation is employed to obtain useful statistics on grain orientation of monolayer and stacking in bilayer MoS2.