Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 15 de 15
Filtrar
1.
J Am Chem Soc ; 145(29): 15997-16014, 2023 Jul 26.
Artículo en Inglés | MEDLINE | ID: mdl-37432784

RESUMEN

The alloyed lead/tin (Pb/Sn) halide perovskites have gained significant attention in the development of tandem solar cells and other optoelectronic devices due to their widely tunable absorption edge. To gain a better understanding of the intriguing properties of Pb/Sn perovskites, such as their anomalous bandgap's dependence on stoichiometry, it is important to deepen the understanding of their chemical behavior and local structure. Herein, we investigate a series of two-dimensional Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) phase alloyed Pb/Sn bromide perovskites using butylammonium (BA) and 3-(aminomethyl)pyridinium (3AMPY) as the spacer cations: (BA)2(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) and (3AMPY)(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) through a solution-based approach. Our results show that the ratio and site preference of Pb/Sn atoms are influenced by the layer thickness (n) and spacer cations (A'), as determined by single-crystal X-ray diffraction. Solid-state 1H, 119Sn, and 207Pb NMR spectroscopy analysis shows that the Pb atoms prefer the outer layers in n = 3 members: (BA)2(MA)PbxSnn-xBr10 and (3AMPY)(MA)PbxSnn-xBr10. Layered 2D DJ alloyed Pb/Sn bromide perovskites (3AMPY)(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) demonstrate much narrower optical band gaps, lower energy PL emission peaks, and longer carrier lifetimes compared to those of RP analogs. Density functional theory calculations suggest that Pb-rich alloys (Pb:Sn ∼4:1) for n = 1 compounds are thermodynamically favored over 50:50 (Pb:Sn ∼1:1) compositions. From grazing-incidence wide-angle X-ray scattering (GIWAXS), we see that films in the RP phase orient parallel to the substrate, whereas for DJ cases, random orientations are observed relative to the substrate.

2.
Nat Mater ; 19(11): 1201-1206, 2020 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-32839586

RESUMEN

Understanding the electronic energy landscape in metal halide perovskites is essential for further improvements in their promising performance in thin-film photovoltaics. Here, we uncover the presence of above-bandgap oscillatory features in the absorption spectra of formamidinium lead triiodide thin films. We attribute these discrete features to intrinsically occurring quantum confinement effects, for which the related energies change with temperature according to the inverse square of the intrinsic lattice parameter, and with peak index in a quadratic manner. By determining the threshold film thickness at which the amplitude of the peaks is appreciably decreased, and through ab initio simulations of the absorption features, we estimate the length scale of confinement to be 10-20 nm. Such absorption peaks present a new and intriguing quantum electronic phenomenon in a nominally bulk semiconductor, offering intrinsic nanoscale optoelectronic properties without necessitating cumbersome additional processing steps.

3.
Phys Chem Chem Phys ; 16(46): 25557-63, 2014 Dec 14.
Artículo en Inglés | MEDLINE | ID: mdl-25351254

RESUMEN

The performance of organic electronic devices often shows a strong dependence on the presence of impurities, for example oxygen and water molecules. Here we use first-principles calculations to examine oxygen- and water-related effects in poly(3-hexylthiophene) (P3HT), one of the most widely used donors in organic photovoltaics. We find that oxygen species may be stabilized in P3HT crystals in several different impurity configurations, including physisorbed and chemisorbed geometries. We also find that a number of these structures gives rise to levels inside the P3HT band gap and can thus act as carrier traps. In contrast, water molecules remain physisorbed between the polymer chains and induce only minimal changes in the electronic properties of the host system. The results are in agreement with pertinent experiments and elucidate the atomic-scale details of oxygen-related degradation of P3HT-based devices.

4.
ACS Energy Lett ; 9(6): 2696-2702, 2024 Jun 14.
Artículo en Inglés | MEDLINE | ID: mdl-38903402

RESUMEN

In metal halide perovskites, the complex dielectric screening together with low energy of phonon modes leads to non-negligible Fröhlich coupling. While this feature of perovskites has already been used to explain some of the puzzling aspects of carrier transport in these materials, the possible impact of polaronic effects on the optical response, especially excitonic properties, is much less explored. Here, with the use of magneto-optical spectroscopy, we revealed the non-hydrogenic character of the excitons in metal halide perovskites, resulting from the pronounced Fröhlich coupling. Our results can be well described by the polaronic-exciton picture where electron and hole interactions are no longer described by a Coulomb potential. Furthermore, we show experimental evidence that the carrier-phonon interaction leads to the enhancement of the carrier's effective mass. Notably, our measurements reveal a pronounced temperature dependence of the carrier's effective mass, which we attribute to a band structure renormalization induced by the population of low-energy phonon modes. This interpretation finds support in our first-principles calculations.

5.
Nanoscale ; 15(36): 14764-14773, 2023 Sep 21.
Artículo en Inglés | MEDLINE | ID: mdl-37646120

RESUMEN

The study of surface defects is one of the forefronts of halide perovskite research. In the nanoscale regime, where the surface-to-volume ratio is high, the surface plays a key role in determining the electronic properties of perovskites. Perovskite-inspired silver iodobismuthates are promising photovoltaic absorbers. Herein, we demonstrate the colloidal synthesis of phase pure and highly crystalline AgBiI4 nanocrystals (NCs). Surface-sensitive spectroscopic techniques reveal the rich surface features of the NCs that enable their impressive long-term environmental and thermal stabilities. Notably, the surface termination and its passivation effects on the electronic properties of AgBiI4 are investigated. Our atomistic simulations suggest that a bismuth iodide-rich surface, as in the case of AgBiI4 NCs, does not introduce surface trap states within the band gap region of AgBiI4, unlike a silver iodide-rich surface. These findings may encourage the investigation of surfaces of other lead-free perovskite-inspired materials.

6.
J Phys Chem Lett ; 12(18): 4474-4482, 2021 May 13.
Artículo en Inglés | MEDLINE | ID: mdl-33956454

RESUMEN

Lead-free halide double perovskites have attracted considerable attention as complements to lead-based halide perovskites in a range of optoelectronic applications. Experiments on Cs2AgBiBr6 indicate carrier mobilities in the range of 0.3-11 cm2/(V s) at room temperature, considerably lower than in lead-based perovskites. The origin of low mobilities is currently unclear, calling for an atomic-scale investigation. We report state-of-the-art ab initio calculations of the phonon-limited mobility of charge carriers in lead-free halide double perovskites Cs2AgBiX6 (X = Br, Cl). For Cs2AgBiBr6, we obtain room-temperature electron and hole mobilities of 17 and 14 cm2/(V s), respectively, in line with experiments. We demonstrate that the cause for the lower mobility of this compound, compared to CH3NH3PbI3, resides in the heavier carrier effective masses. A mode-resolved analysis of scattering rates reveals the predominance of Fröhlich electron-phonon scattering, similar to lead-based perovskites. Our results indicate that, to increase the mobility of lead-free perovskites, it is necessary to reduce the effective masses, for example by cation engineering.

7.
Adv Mater ; 33(7): e2003137, 2021 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-33382153

RESUMEN

Controlling the morphology of metal halide perovskite layers during processing is critical for the manufacturing of optoelectronics. Here, a strategy to control the microstructure of solution-processed layered Ruddlesden-Popper-phase perovskite films based on phenethylammonium lead bromide ((PEA)2 PbBr4 ) is reported. The method relies on the addition of the organic semiconductor 2,7-dioctyl[1]benzothieno[3,2-b]benzothiophene (C8 -BTBT) into the perovskite formulation, where it facilitates the formation of large, near-single-crystalline-quality platelet-like (PEA)2 PbBr4 domains overlaid by a ≈5-nm-thin C8 -BTBT layer. Transistors with (PEA)2 PbBr4 /C8 -BTBT channels exhibit an unexpectedly large hysteresis window between forward and return bias sweeps. Material and device analysis combined with theoretical calculations suggest that the C8 -BTBT-rich phase acts as the hole-transporting channel, while the quantum wells in (PEA)2 PbBr4 act as the charge storage element where carriers from the channel are injected, stored, or extracted via tunneling. When tested as a non-volatile memory, the devices exhibit a record memory window (>180 V), a high erase/write channel current ratio (104 ), good data retention, and high endurance (>104 cycles). The results here highlight a new memory device concept for application in large-area electronics, while the growth technique can potentially be exploited for the development of other optoelectronic devices including solar cells, photodetectors, and light-emitting diodes.

8.
J Phys Chem Lett ; 10(8): 1722-1728, 2019 Apr 18.
Artículo en Inglés | MEDLINE | ID: mdl-30920840

RESUMEN

The past few years witnessed the rise of halide perovskites as prominent materials for a wide range of optoelectronic applications. However, oxide perovskites have a much longer history and are pivotal in many technological applications. As of today, a rational connection between these important materials is missing. Here, we explore this missing link and develop a novel concept of perovskite analogs, which led us to identify a new semiconductor, Ba2AgIO6. It exhibits an electronic band structure remarkably similar to that of our recently discovered halide double perovskite Cs2AgInCl6, but with a band gap in the visible range at 1.9 eV. We show that Ba2AgIO6 and Cs2AgInCl6 are analogs of the well-known transparent conductor BaSnO3. We synthesize Ba2AgIO6 following a low-temperature solution process, and we perform crystallographic and optical characterizations. Ba2AgIO6 is a cubic oxide double perovskite with a direct low gap, opening new opportunities in perovskite-based electronics optoelectronics and energy applications.

9.
ACS Appl Mater Interfaces ; 11(51): 48021-48028, 2019 Dec 26.
Artículo en Inglés | MEDLINE | ID: mdl-31793761

RESUMEN

Liquid-phase exfoliation of zirconium trisulfide (ZrS3) was used to produce stable and ready-to-use inks for solution-processed semiconductor thin-film deposition. Ribbon-like layered crystals of ZrS3 were produced by the chemical vapor transport method and were then exfoliated in three different solvents: dimethylformamide, ethanol, and isopropyl alcohol. The resulting ZrS3 dispersions were compared for stability and the ability to form continuous films on top of the perovskite layer in light-emitting diodes with the ITO/PEDOT:PSS/MAPbBr3/2D-ZrS3/LiF/Al structure. Film deposition was performed by using either spray or slot-die coating methods. The slot-die coating route proved to produce better and more uniform films with respect to spray coating. We found that the 2D ZrS3 electron injection layer (EIL) stabilized the interface between the perovskite and LiF/Al cathode, reducing the turn-on voltage to 2.8 V and showing a luminance that does not degrade during voltage sweep. On the other hand, EIL-free devices show electroluminescence on the first voltage sweep that reduces almost to zero in the subsequent sweeps. Combining physical device simulation and density functional theory calculation, we are able to explain these results in terms of lowering the electron injection barrier at the cathode.

10.
Adv Sci (Weinh) ; 5(4): 1700980, 2018 Apr.
Artículo en Inglés | MEDLINE | ID: mdl-29721432

RESUMEN

Fullerenes and their derivatives are widely used as electron acceptors in bulk-heterojunction organic solar cells as they combine high electron mobility with good solubility and miscibility with relevant semiconducting polymers. However, studies on the use of fullerenes as the sole photogeneration and charge-carrier material are scarce. Here, a new type of solution-processed small-molecule solar cell based on the two most commonly used methanofullerenes, namely [6,6]-phenyl-C61-butyric acid methyl ester (PC60BM) and [6,6]-phenyl-C71-butyric acid methyl ester (PC70BM), as the light absorbing materials, is reported. First, it is shown that both fullerene derivatives exhibit excellent ambipolar charge transport with balanced hole and electron mobilities. When the two derivatives are spin-coated over the wide bandgap p-type semiconductor copper (I) thiocyanate (CuSCN), cells with power conversion efficiency (PCE) of ≈1%, are obtained. Blending the CuSCN with PC70BM is shown to increase the performance further yielding cells with an open-circuit voltage of ≈0.93 V and a PCE of 5.4%. Microstructural analysis reveals that the key to this success is the spontaneous formation of a unique mesostructured p-n-like heterointerface between CuSCN and PC70BM. The findings pave the way to an exciting new class of single photoactive material based solar cells.

11.
J Phys Chem Lett ; 8(16): 3917-3924, 2017 Aug 17.
Artículo en Inglés | MEDLINE | ID: mdl-28745888

RESUMEN

During the past year, halide double perovskites attracted attention as potential lead-free alternatives to Pb-based halide perovskites. However, none of the compounds discovered so far can match the optoelectronic properties of MAPbI3 (MA = CH3NH3). Here we argue that, from the electronic structure viewpoint, the only option to make Pb-free double perovskites retaining the remarkable properties of MAPbI3 is to combine In and Bi as B+ and B3+ cations, respectively. While inorganic double perovskites such as Cs2InBiX6 were found to be unstable due to In+ oxidizing into In3+, we show that the +1 oxidation state of In becomes progressively more stable as the A-site cation changes from K to Cs. Hence, we propose the use of MA and FA [FA = CH(NH2)2] to stabilize A2InBiBr6 double perovskites. We show that the optoelectronic properties of MA2InBiBr6 are remarkably similar to those of MAPbI3 and explore the mixed-cation (Cs/MA/FA)2InBiBr6 halide double perovskites.

12.
J Phys Chem Lett ; 8(4): 772-778, 2017 Feb 16.
Artículo en Inglés | MEDLINE | ID: mdl-28133967

RESUMEN

A2BB'X6 halide double perovskites based on bismuth and silver have recently been proposed as potential environmentally friendly alternatives to lead-based hybrid halide perovskites. In particular, Cs2BiAgX6 (X = Cl, Br) have been synthesized and found to exhibit band gaps in the visible range. However, the band gaps of these compounds are indirect, which is not ideal for applications in thin film photovoltaics. Here, we propose a new class of halide double perovskites, where the B3+ and B+ cations are In3+ and Ag+, respectively. Our first-principles calculations indicate that the hypothetical compounds Cs2InAgX6 (X = Cl, Br, I) should exhibit direct band gaps between the visible (I) and the ultraviolet (Cl). Based on these predictions, we attempt to synthesize Cs2InAgCl6 and Cs2InAgBr6, and we succeed to form the hitherto unknown double perovskite Cs2InAgCl6. X-ray diffraction yields a double perovskite structure with space group Fm3̅m. The measured band gap is 3.3 eV, and the compound is found to be photosensitive and turns reversibly from white to orange under ultraviolet illumination. We also perform an empirical analysis of the stability of Cs2InAgX6 and their mixed halides based on Goldschmidt's rules, and we find that it should also be possible to form Cs2InAg(Cl1-xBrx)6 for x < 1. The synthesis of mixed halides will open the way to the development of lead-free double perovskites with direct and tunable band gaps.

13.
J Phys Chem Lett ; 7(7): 1254-9, 2016 Apr 07.
Artículo en Inglés | MEDLINE | ID: mdl-26982118

RESUMEN

Lead-based halide perovskites are emerging as the most promising class of materials for next-generation optoelectronics; however, despite the enormous success of lead-halide perovskite solar cells, the issues of stability and toxicity are yet to be resolved. Here we report on the computational design and the experimental synthesis of a new family of Pb-free inorganic halide double perovskites based on bismuth or antimony and noble metals. Using first-principles calculations we show that this hitherto unknown family of perovskites exhibits very promising optoelectronic properties, such as tunable band gaps in the visible range and low carrier effective masses. Furthermore, we successfully synthesize the double perovskite Cs2BiAgCl6, perform structural refinement using single-crystal X-ray diffraction, and characterize its optical properties via optical absorption and photoluminescence measurements. This new perovskite belongs to the Fm3̅m space group and consists of BiCl6 and AgCl6 octahedra alternating in a rock-salt face-centered cubic structure. From UV-vis and photoluminescence measurements we obtain an indirect gap of 2.2 eV.

14.
Science ; 354(6314): 861-865, 2016 11 18.
Artículo en Inglés | MEDLINE | ID: mdl-27856902

RESUMEN

We demonstrate four- and two-terminal perovskite-perovskite tandem solar cells with ideally matched band gaps. We develop an infrared-absorbing 1.2-electron volt band-gap perovskite, FA0.75Cs0.25Sn0.5Pb0.5I3, that can deliver 14.8% efficiency. By combining this material with a wider-band gap FA0.83Cs0.17Pb(I0.5Br0.5)3 material, we achieve monolithic two-terminal tandem efficiencies of 17.0% with >1.65-volt open-circuit voltage. We also make mechanically stacked four-terminal tandem cells and obtain 20.3% efficiency. Notably, we find that our infrared-absorbing perovskite cells exhibit excellent thermal and atmospheric stability, not previously achieved for Sn-based perovskites. This device architecture and materials set will enable "all-perovskite" thin-film solar cells to reach the highest efficiencies in the long term at the lowest costs.

15.
J Phys Chem Lett ; 6(13): 2496-502, 2015 Jul 02.
Artículo en Inglés | MEDLINE | ID: mdl-26266725

RESUMEN

Owing to their record-breaking energy conversion efficiencies, hybrid organometallic perovskites have emerged as the most promising light absorbers and ambipolar carrier transporters for solution-processable solar cells. Simultaneously, due to its exceptional electron mobility, graphene represents a prominent candidate for replacing transparent conducting oxides. Thus, it is possible that combining these wonder materials may propel the efficiency toward the Schokley-Queisser limit. Here, using first-principles calculations on graphene-CH3NH3PbI3 interfaces, we find that graphene suppresses the octahedral tilt in the very first perovskite monolayer, leading to a nanoscale ferroelectric distortion with a permanent polarization of 3 mC/m(2). This interfacial ferroelectricity drives electron extraction from the perovskite and hinders electron-hole recombination by keeping the electrons and holes separated. The interfacial ferroelectricity identified here simply results from the interplay between graphene's planar structure and CH3NH3PbI3's octahedral connectivity; therefore, this mechanism may be effective in a much broader class of perovskites, with potential applications in photovoltaics and photocatalysis.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA