Developing fibrillated cellulose as a sustainable technological material.

Cellulose is the most abundant biopolymer on Earth, found in trees, waste from agricultural crops and other biomass. The fibres that comprise cellulose can be broken down into building blocks, known as fibrillated cellulose, of varying, controllable dimensions that extend to the nanoscale. Fibrillated cellulose is harvested from renewable resources, so its sustainability potential combined with its other functional properties (mechanical, optical, thermal and fluidic, for example) gives this nanomaterial unique technological appeal. Here we explore the use of fibrillated cellulose in the fabrication of materials ranging from composites and macrofibres, to thin films, porous membranes and gels. We discuss research directions for the practical exploitation of these structures and the remaining challenges to overcome before fibrillated cellulose materials can reach their full potential. Finally, we highlight some key issues towards successful manufacturing scale-up of this family of materials.

Entropy Drives Interpolymer Association in Water: Insights into Molecular Mechanisms.

Interpolymer association in aqueous solutions is essential for many industrial processes, new materials design, and the biochemistry of life. However, our understanding of the association mechanism is limited. Classical theories do not provide molecular details, creating a need for detailed mechanistic insights. This work consolidates previous literature with complementary isothermal titration calorimetry (ITC) measurements and molecular dynamics (MD) simulations to investigate molecular mechanisms to provide such insights. The large body of ITC data shows that intermolecular bonds, such as ionic or hydrogen bonds, cannot drive association. Instead, polymer association is entropy-driven due to the reorganization of water and ions. We propose a unifying entropy-driven association mechanism by generalizing previously suggested polyion association principles to include nonionic polymers, here termed polydipoles. In this mechanism, complementary charge densities of the polymers are the common denominators of association, for both polyions and polydipoles. The association of the polymers results mainly from two processes: charge exchange and amphiphilic association. MD simulations indicate that the amphiphilic assembly alone is enough for the initial association. Our proposed mechanism is a step toward a molecular understanding of the formation of complexes between synthetic and biological polymers under ambient or biological conditions.

Study on the Rectification of Ionic Diode Based on Cross-Linked Nanocellulose Bipolar Membranes.

Nanocellulose-based membranes have attracted intense attention in bioelectronic devices due to their low cost, flexibility, biocompatibility, degradability, and sustainability. Herein, we demonstrate a flexible ionic diode using a cross-linked bipolar membrane fabricated from positively and negatively charged cellulose nanofibrils (CNFs). The rectified current originates from the asymmetric charge distribution, which can selectively determine the direction of ion transport inside the bipolar membrane. The mechanism of rectification was demonstrated by electrochemical impedance spectroscopy with voltage biases. The rectifying behavior of this kind of ionic diode was studied by using linear sweep voltammetry to obtain current-voltage characteristics and the time dependence of the current. In addition, the performance of cross-linked CNF diodes was investigated while changing parameters such as the thickness of the bipolar membranes, the scanning voltage range, and the scanning rate. A good long-term stability due to the high density cross-linking of the diode was shown in both current-voltage characteristics and the time dependence of current.

Molecular Dynamics Simulations of Cellulose and Dialcohol Cellulose under Dry and Moist Conditions.

The development of wood-based thermoplastic polymers that can replace synthetic plastics is of high environmental importance, and previous studies have indicated that cellulose-rich fiber containing dialcohol cellulose (ring-opened cellulose) is a very promising candidate material. In this study, molecular dynamics simulations, complemented with experiments, were used to investigate how and why the degree of ring opening influences the properties of dialcohol cellulose, and how temperature and presence of water affect the material properties. Mechanical tensile properties, diffusion/mobility-related properties, densities, glass-transition temperatures, potential energies, hydrogen bonds, and free volumes were simulated for amorphous cellulosic materials with 0-100% ring opening, at ambient and high (150 °C) temperatures, with and without water. The simulations showed that the impact of ring openings, with respect to providing molecular mobility, was higher at high temperatures. This was also observed experimentally. Hence, the ring opening had the strongest beneficial effect on "processability" (reduced stiffness and strength) above the glass-transition temperature and in wet conditions. It also had the effect of lowering the glass-transition temperature. The results here showed that molecular dynamics is a valuable tool in the development of wood-based materials with optimal thermoplastic properties.

Photocross-Linkable and Shape-Memory Biomaterial Hydrogel Based on Methacrylated Cellulose Nanofibres.

In the context of three-dimensional (3D) cell culture and tissue engineering, 3D printing is a powerful tool for customizing in vitro 3D cell culture models that are critical for understanding the cell-matrix and cell-cell interactions. Cellulose nanofibril (CNF) hydrogels are emerging in constructing scaffolds able to imitate tissue in a microenvironment. A direct modification of the methacryloyl (MA) group onto CNF is an appealing approach to synthesize photocross-linkable building blocks in formulating CNF-based bioinks for light-assisted 3D printing; however, it faces the challenge of the low efficiency of heterogenous surface modification. Here, a multistep approach yields CNF methacrylate (CNF-MA) with a decent degree of substitution while maintaining a highly dispersible CNF hydrogel, and CNF-MA is further formulated and copolymerized with monomeric acrylamide (AA) to form a super transparent hydrogel with tuneable mechanical strength (compression modulus, approximately 5-15 kPa). The resulting photocurable hydrogel shows good printability in direct ink writing and good cytocompatibility with HeLa and human dermal fibroblast cell lines. Moreover, the hydrogel reswells in water and expands to all directions to restore its original dimension after being air-dried, with further enhanced mechanical properties, for example, Young's modulus of a 1.1% CNF-MA/1% PAA hydrogel after reswelling in water increases to 10.3 kPa from 5.5 kPa.

Elastoplastic behavior of anisotropic, physically crosslinked hydrogel networks comprising stiff, charged fibrils in an electrolyte.

Fibrillar hydrogels are remarkably stiff, low-density networks that can hold vast amounts of water. These hydrogels can easily be made anisotropic by orienting the fibrils using different methods. Unlike the detailed and established descriptions of polymer gels, there is no coherent theoretical framework describing the elastoplastic behavior of fibrillar gels, especially concerning anisotropy. In this work, the swelling pressures of anisotropic fibrillar hydrogels made from cellulose nanofibrils were measured in the direction perpendicular to the fibril alignment. This experimental data was used to develop a model comprising three mechanical elements representing the network and the osmotic pressure due to non-ionic and ionic surface groups on the fibrils. At low solidity, the stiffness of the hydrogels was dominated by the ionic swelling pressure governed by the osmotic ingress of water. Fibrils with different functionality show the influence of aspect ratio, chemical functionality, and the remaining amount of hemicelluloses. This general model describes physically crosslinked hydrogels comprising fibrils with high flexural rigidity - that is, with a persistence length larger than the mesh size. The experimental technique is a framework to study and understand the importance of fibrillar networks for the evolution of multicellular organisms, like plants, and the influence of different components in plant cell walls.

Green Ambient-Dried Aerogels with a Facile pH-Tunable Surface Charge for Adsorption of Cationic and Anionic Contaminants with High Selectivity.

The fabrication of reusable, sustainable adsorbents from low-cost, renewable resources via energy efficient methods is challenging. This paper presents wet-stable, carboxymethylated cellulose nanofibril (CNF) and amyloid nanofibril (ANF) based aerogel-like adsorbents prepared through efficient and green processes for the removal of metal ions and dyes from water. The aerogels exhibit tunable densities (18-28 kg m-3), wet resilience, and an interconnected porous structure (99% porosity), with a pH controllable surface charge for adsorption of both cationic (methylene blue and Pb(II)) and anionic (brilliant blue, congo red, and Cr(VI)) model contaminants. The Langmuir saturation adsorption capacity of the aerogel was calculated to be 68, 79, and 42 mg g-1 for brilliant blue, Pb(II), and Cr(VI), respectively. Adsorption kinetic studies for the adsorption of brilliant blue as a model contaminant demonstrated that a pseudo-second-order model best fitted the experimental data and that an intraparticle diffusion model suggests that there are three adsorption stages in the adsorption of brilliant blue on the aerogel. Following three cycles of adsorption and regeneration, the aerogels maintained nearly 97 and 96% of their adsorption capacity for methylene blue and Pb(II) as cationic contaminants and 89 and 80% for brilliant blue and Cr(VI) as anionic contaminants. Moreover, the aerogels showed remarkable selectivity for Pb(II) in the presence of calcium and magnesium as background ions, with a selectivity coefficient more than 2 orders of magnitude higher than calcium and magnesium. Overall, the energy-efficient and sustainable fabrication procedure, along with good structural stability, reusability, and selectivity, makes these aerogels very promising for water purification applications.

Layer-by-Layer Assembly of Strong Thin Films with High Lithium Ion Conductance for Batteries and Beyond.

Polyethylene oxide (PEO) is one of the most widely used polymeric ion conductors which has the potential for a wide range of applications in energy storage. The enhancement of ionic conductivity of PEO-based electrolytes is generally achieved by sacrificing the mechanical properties. Using layer-by-layer (LbL) self-assembly with a nanoscale precision, mechanically strong and self-healable PEO/polyacrylic acid composite thin films with a high Li+ conductivity of 2.3 ± 0.8 × 10-4 S cm-1 at 30 °C, and a strength of 3.7 MPa is prepared. These values make the LbL composite among the best recorded multifunctional solid electrolytes. The electrolyte thin film withstands at least 1000 cycles of striping/plating of Li at 0.05 mA cm-2 . It is further shown that the LbL thin films can be used as separators for Li-ion batteries to deliver a capacity of 116 mAh g-1 at 0.1 C in an all-LbL-assembled lithium iron phosphate/lithium titanate battery. Finally, it is demonstrated that the thin films can be used as ion-conducting substrates for flexible electrochemical devices, including micro supercapacitors and electrochemical transistors.

Layer-by-Layer Self-Assembled Nanostructured Electrodes for Lithium-Ion Batteries.

Gaining control over the nanoscale assembly of different electrode components in energy storage systems can open the door for design and fabrication of new electrode and device architectures that are not currently feasible. This work presents aqueous layer-by-layer (LbL) self-assembly as a route towards design and fabrication of advanced lithium-ion batteries (LIBs) with unprecedented control over the structure of the electrode at the nanoscale, and with possibilities for various new designs of batteries beyond the conventional planar systems. LbL self-assembly is a greener fabrication route utilizing aqueous dispersions that allow various Li+ intercalating materials assembled in complex 3D porous substrates. The spatial precision of positioning of the electrode components, including ion intercalating phase and electron-conducting phase, is down to nanometer resolution. This capable approach makes a lithium titanate anode delivering a specific capacity of 167 mAh g-1 at 0.1C and having comparable performances to conventional slurry-cast electrodes at current densities up to 100C. It also enables high flexibility in the design and fabrication of the electrodes where various advanced multilayered nanostructures can be tailored for optimal electrode performance by choosing cationic polyelectrolytes with different molecular sizes. A full-cell LIB with excellent mechanical resilience is built on porous insulating foams.

Structure Development of the Interphase between Drying Cellulose Materials Revealed by In Situ Grazing-Incidence Small-Angle X-ray Scattering.

The nano- to microscale structures at the interface between materials can define the macroscopic material properties. These structures are extremely difficult to investigate for complex material systems, such as cellulose-rich materials. The development of new model cellulose materials and measuring techniques has opened new possibilities to resolve this problem. We present a straightforward approach combining micro-focusing grazing-incidence small-angle X-ray scattering and atomic force microscopy (AFM) to investigate the structural rearrangements of cellulose/cellulose interfaces in situ during drying. Based on the results, we propose that molecular interdiffusion and structural rearrangement play a major role in the development of the properties of the cellulose/cellulose interphase; this model is representative of the development of the properties of joint/contact points between macroscopic cellulose fibers.

Swelling of Cellulose-Based Fibrillar and Polymeric Networks Driven by Ion-Induced Osmotic Pressure.

Cellulose-based model materials in the form of fibrillar networks and macromolecular hydrogels were used to investigate the ion-induced swelling in relation to the elasticity and structure of the network. Both networks were charged by the introduction of carboxyl groups onto the cellulose surface, and the dimensions of the networks in aqueous solution were measured as a function of pH. The use of cellulose-model materials that contained either noncrystalline cellulose or cellulose I fibrils made it possible to model the effect of the ion-induced osmotic pressure of a delignified wood fiber wall. The noncrystalline hydrogels represented the noncrystalline domains of the fiber wall and the fibrillar network represented the supramolecular network of cellulose I fibrils of the fiber wall. The experimental results were compared to swelling potentials computed using the Donnan theory, and it was found that the ion-induced water uptake within the cellulose networks followed the theoretical predictions to a large extent. However, fibrillar networks were found to plastically deform upon swelling and deviated from the ideal Donnan theory for polyelectrolyte gel networks. Upon addition of salt to the aqueous phase surrounding the cellulose materials, both hydrogels and fibrillar networks deviated from the Donnan theory predictions, suggesting that structural differences between the networks impact their swelling.

Dendritic Polyampholyte-Assisted Formation of Functional Cellulose Nanofibril Materials.

A new platform of functional hybrid materials from anionically charged high-aspect-ratio cellulose nanofibrils (CNFs) and a dendritic polyampholyte, Helux, is herein proposed. The polyampholytic character of Helux enabled facile and efficient nanoscale mixing with the CNFs, and the resulting composite mixtures of CNFs and Helux displayed thixotropic behavior and formed physical and reversibly cross-linked gels when left unperturbed for short spans of time. The gel could be chemically cross-linked into self-supporting solid hydrogels containing impressive water contents of 99.6% and a storage modulus of 1.8 kPa by thermal activation. Non-cross-linked mixtures of CNF/Helux were assembled into composites, such as films by solvent casting and aerogels with densities as low as 4 kg/m3 by lyophilizing ice-templated CNF/Helux mixtures. The resulting materials exhibited excellent wet stability due to the heat-activated cross-linking and were readily available for postfunctionalization via amidation chemistry using Helux-accessible amines in aqueous conditions. The mechanical performance of the films was not jeopardized by the addition of Helux. Additionally, by varying the amount of Helux, the compressive elastic modulus of aerogels was tunable in both the non-cross-linked and cross-linked states. The fast and efficient nanoscale mixing of anionic CNFs and a polymer containing cationic groups is unique, novel, and promising as a functional material platform. Sustainable CNFs guided by heterofunctional dendritic polyampholytes are envisaged to act as a pillar toward high-performance applications, including biomedicine and biomaterials.

Influence of Solubility on the Adsorption of Different Xyloglucan Fractions at Cellulose-Water Interfaces.

Xylogucan (XG) fractions with different molar masses were prepared while preserving the natural structure of the XG. The solubility of the fractions was investigated using light scattering, chromatography, and microscopy techniques. The conformational changes of the XG molecules and their association and phase separation were investigated together with concentration and molar mass changes. The knowledge gained was then applied to investigate the interaction of different XG fractions at cellulose model surfaces using a quartz crystal microbalance with dissipation. The results indicate that there is a cluster formation and phase separation of the XG molecules at the cellulose/water interface induced by the increase in XG concentration close to the surface. Concomitantly, the adsorption regimes are altered for the XG fractions depending on the solubility properties, indicating that the insolubility, association, and phase separation of XGs in aqueous media affect their interaction with cellulose. The study is of vital importance for improving the functionality of sustainable materials made from xyloglucan/cellulose natural composites.

Self-Fibrillating Cellulose Fibers: Rapid In Situ Nanofibrillation to Prepare Strong, Transparent, and Gas Barrier Nanopapers.

Cellulose nanofibrils (CNFs) prepared from wood biomass are promising candidates to replace oil-based materials in, for example, packaging applications. However, CNFs' affinity for water combined with their small size leads to very slow and energy-demanding processes for handling and removal of water. To a large extent, this is the major roadblock that prevents a feasible production of dry CNF-based materials on an industrial scale. In this work, self-fibrillating fibers (SFFs) from wood, where the fibrils can be liberated by external stimuli, were prepared via sequential TEMPO and periodate oxidation reactions. Papers made from these modified fibers using conventional laboratory papermaking methods were then in situ nanofibrillated via a modest pH increase. With a dewatering time of less than 10 s for a 3 g/L dispersion, SFFs represent a major improvement over conventional CNF nanopapers that take approximately 6 h to dewater. Moreover, 100 g/m2 nanopapers obtained through in situ fibrillation exhibited comparable, if not superior, properties to those reported for conventionally made CNF films. A tensile strength of 184 MPa, a Young's modulus of 5.2 GPa, a strain at break of 4.6%, 90% optical transmittance, and an oxygen permeability of 0.7 cm3 µm m-2 d-1 kPa-1 at 50% RH were measured for SFF nanopapers. Furthermore, in situ nanofibrillation of the SFFs can also be achieved from already dried papers, facilitating numerous possibilities in terms of logistics and handling for an industrial scale-up and transportation of nanomaterials. Overall, stimuli-induced SFFs indeed enable a rapid production of strong, transparent, gas barrier nanopapers, which likely can be industrially scaled up and eventually compete with the oil-based plastics in the market for packaging materials.

Best Practice for Reporting Wet Mechanical Properties of Nanocellulose-Based Materials.

Nanocellulose-based materials and nanocomposites show extraordinary mechanical properties with high stiffness, strength, and toughness. Although the last decade has witnessed great progress in understanding the mechanical properties of these materials, a crucial challenge is to identify pathways to introduce high wet strength, which is a critical parameter for commercial applications. Because of the waterborne fabrication methods, nanocellulose-based materials are prone to swelling by both adsorption of moist air or liquid water. Unfortunately, there is currently no best practice on how to take the swelling into account when reporting mechanical properties at different relative humidity or when measuring the mechanical properties of fully hydrated materials. This limits and in parts fully prevents comparisons between different studies. We review current approaches and propose a best practice for measuring and reporting mechanical properties of wet nanocellulose-based materials, highlighting the importance of swelling and the correlation between mechanical properties and volume expansion.

Development of mechanical properties of regenerated cellulose beads during drying as investigated by atomic force microscopy.

The mechanical properties as well as the size changes of swollen cellulose beads were measured in situ during solvent evaporation by atomic force microscopy (AFM) indentation measurement combined with optical microscopy. Three factors are proposed to govern the mechanical properties of the cellulose beads in the swollen state and during drying: (i) the cellulose concentration, (ii) the interaction between the cellulose entities, (iii) the heterogeneity of the network structure within the cellulose beads.

Layer-by-Layer Assembly of High-Performance Electroactive Composites Using a Multiple Charged Small Molecule.

Layer-by-layer (LbL) assembly is a versatile tool for fabricating multilayers with tailorable nanostructures. LbL, however, generally relies on polyelectrolytes, which are mostly insulating and induce large interlayer distances. We demonstrate a method in which we replace polyelectrolytes with the smallest unit capable of LbL self-assembly: a molecule with multiple positive charges, tris(3-aminopropyl)amine (TAPA), to fabricate LbL films with negatively charged single-walled carbon nanotubes (CNTs). TAPA introduces less defects during the LbL build-up and results in more efficient assembly of films with denser micromorphology. Twenty bilayers of TAPA/CNT showed a low sheet resistance of 11 kΩ, a high transparency of 91% at 500 nm, and a high electronic conductivity of 1100 S/m on planar substrates. We also fabricated LbL films on porous foams with a conductivity of 69 mS/m and used them as electrodes for supercapacitors with a high specific capacitance of 43 F/g at a discharging current density of 1 A/g.

Unidirectional Swelling of Dynamic Cellulose Nanofibril Networks: A Platform for Tunable Hydrogels and Aerogels with 3D Shapeability.

A process has been developed to create self-supporting hydrogels with low solids content (down to 0.5 wt %) and anisotropic aerogels with a low density (down to 5 kg/m3) from cellulose nanofibrils (CNFs). The CNF networks were formed by vacuum filtration of dilute dispersions (0.2 wt %) of 90% CNFs and 10% alginate. We call this process "the dynamic CNF network approach" since the solids content of these hydrogels can be tuned in the range of 0.5-3 wt % by reswelling the filter cakes in a medium with a controlled osmotic pressure. These hydrogels are significantly stronger than the 1-2 wt % CNF gels typically used to prepare hydrogels and aerogels because the dynamic CNF networks are formed below their arrested state threshold (ca. 0.5 wt %) and are thus homogeneous. The vacuum filtration leads to a directional reswelling vertical to the plane of the filter cake, and this is crucial in order to turn a two-dimensional (2D) shape, cut from the filter cake, into a 3D hydrogel without distorting the 2D shape. The anisotropic swelling was used to create intricate 3D-shaped hydrogels and solved some of the issues involved in the degassing and molding of high-viscosity CNF gels. Multivalent ions were used to lock the CNF and alginate networks at the desired solids content and 3D shape, and resulted in an increase by an order of magnitude in storage modulus. Moreover, the self-supporting nature of the hydrogels allowed us to freeze-cast them into anisotropic aerogels with the same 3D shape without using any container. The 5 kg/m3 aerogel had a specific modulus of 43 kN m/kg and an anisotropy index of 12, which are impressive properties in relation to earlier experiences. The process can be used for applications where a precise control of density and shape is critical.

Influence of Cellulose Charge on Bacteria Adhesion and Viability to PVAm/CNF/PVAm-Modified Cellulose Model Surfaces.

A contact-active antibacterial approach based on the physical adsorption of a cationic polyelectrolyte onto the surface of a cellulose material is today regarded as an environment-friendly way of creating antibacterial surfaces and materials. In this approach, the electrostatic charge of the treated surfaces is considered to be an important factor for the level of bacteria adsorption and deactivation/killing of the bacteria. In order to clarify the influence of surface charge density of the cellulose on bacteria adsorption as well as on their viability, bacteria were adsorbed onto cellulose model surfaces, which were modified by physically adsorbed cationic polyelectrolytes to create surfaces with different positive charge densities. The surface charge was altered by the layer-by-layer (LbL) assembly of cationic polyvinylamine (PVAm)/anionic cellulose nanofibril/PVAm onto the initially differently charged cellulose model surfaces. After exposing the LbL-treated surfaces to Escherichia coli in aqueous media, a positive correlation was found between the adsorption of bacteria as well as the ratio of nonviable/viable bacteria and the surface charge of the LbL-modified cellulose. By careful colloidal probe atomic force microscopy measurements, it was estimated, due to the difference in surface charges, that interaction forces at least 50 nN between the treated surfaces and a bacterium could be achieved for the surfaces with the highest surface charge, and it is suggested that these considerable interaction forces are sufficient to disrupt the bacterial cell wall and hence kill the bacteria.

Cross-Linked and Shapeable Porous 3D Substrates from Freeze-Linked Cellulose Nanofibrils.

Chemically cross-linked highly porous nanocellulose aerogels with complex shapes have been prepared using a freeze-linking procedure that avoids common post activation of cross-linking reactions and freeze-drying. The aerogel shapes ranged from simple geometrical three-dimensional bodies to swirls and solenoids. This was achieved by molding or extruding a periodate oxidized cellulose nanofibril (CNF) dispersion prior to chemical cross-linking in a regular freezer or by reshaping an already prepared aerogel by plasticizing the structure in water followed by reshaping and locking the aerogel into its new shape. The new shapes were most likely retained by new cross-links formed between CNFs brought into contact by the deformation during reshaping. This self-healing ability to form new bonds after plasticization and redrying also contributed to the mechanical resilience of the aerogels, allowing them to be cyclically deformed in the dry state, reswollen with water, and redried with good retention of mechanical integrity. Furthermore, by exploiting the shapeability and available inner structure of the aerogels, a solenoid-shaped aerogel with all surfaces coated with a thin film of conducting polypyrrole was able to produce a magnetic field inside the solenoid, demonstrating electromagnetic properties. Furthermore, by biomimicking the porous interior and stiff exterior of the beak of a toucan bird, a functionalized aerogel was created by applying a 300 µm thick stiff wax coating on its molded external surfaces. This composite material displayed a 10-times higher elastic modulus compared to that of the plain aerogel without drastically increasing the density. These examples show that it is possible to combine advanced shaping with functionalization of both the inner structure and the surface of the aerogels, radically extending the possible use of CNF aerogels.