Lower creatinine to cystatin C ratio is associated with an increased risk of MASLD: A cross-sectional and prospective study of 368,634 UK Biobank participants.

OBJECTIVE: Metabolic dysfunction-associated steatotic liver disease (MASLD) affects many populations, and screening out the high-risk populations at an early stage is a challenge. As a sarcopenia index, the relationship between creatinine to cystatin C ratio (CCR) and MASLD remains unclear. This cross-sectional, prospective study aimed to explore the relationship between CCR and MASLD. Design Firstly, explored the correlation between CCR and MASLD in cross-sectional analyses. Then excluded the population with baseeline diagnosis of MASLD and analyzed the association with baseline CCR levels and the onset of MASLD in the population with available follow-up data. Univariate and multivariate logistic regression analyses were used to calculate odds ratios (ORs) to evaluate the association between CCR levels and MASLD. PATIENTS AND MEASUREMENTS: This study included 368,634 participants from the UK Biobank for cross-sectional and prospective analyses. The demographic characteristics and laboratory measurements of all participants were obtained from the UK Biobank. MASLD was diagnosed according to the multi-society consensus nomenclature. Hepatic steatosis was defined as FLI  ≥60. RESULTS: We grouped the study participants according to CCR tertiles. In cross-sectional analyses, participants in CCR tertile 1 had the highest MASLD risk (OR: 1.070, 95% CI: 1.053-1.088, p < .001). And the similar association was observed in the prospective analyses (CCR tertile 1 OR: 1.340, 95% CI: 1.077-1.660, p = .009; CCR tertile 2 OR: 1.217, 95% CI: 1.021-1.450, p = .029, respectively). After stratification by gender, the significant association between CCR and the onset of MASLD was only observed in males (CCR tertile 1 OR: 1.639, 95% CI: 1.160-2.317, p = .005; CCR tertile 2 OR: 1.322, 95% CI: 1.073-1.628, p = .005, respectively). CONCLUSION: Our results indicated that lower CCR was significantly associated with higher risk of MASLD, based on which predictive models can be developed to screen populations at high risk of developing MASLD.

An integrated model incorporating deep learning, hand-crafted radiomics and clinical and US features to diagnose central lymph node metastasis in patients with papillary thyroid cancer.

OBJECTIVE: To evaluate the value of an integrated model incorporating deep learning (DL), hand-crafted radiomics and clinical and US imaging features for diagnosing central lymph node metastasis (CLNM) in patients with papillary thyroid cancer (PTC). METHODS: This retrospective study reviewed 613 patients with clinicopathologically confirmed PTC from two institutions. The DL model and hand-crafted radiomics model were developed using primary lesion images and then integrated with clinical and US features selected by multivariate analysis to generate an integrated model. The performance was compared with junior and senior radiologists on the independent test set. SHapley Additive exPlanations (SHAP) plot and Gradient-weighted Class Activation Mapping (Grad-CAM) were used for the visualized explanation of the model. RESULTS: The integrated model yielded the best performance with an AUC of 0.841. surpassing that of the hand-crafted radiomics model (0.706, p < 0.001) and the DL model (0.819, p = 0.26). Compared to junior and senior radiologists, the integrated model reduced the missed CLNM rate from 57.89% and 44.74-27.63%, and decreased the rate of unnecessary central lymph node dissection (CLND) from 29.87% and 27.27-18.18%, respectively. SHAP analysis revealed that the DL features played a primary role in the diagnosis of CLNM, while clinical and US features (such as extrathyroidal extension, tumour size, age, gender, and multifocality) provided additional support. Grad-CAM indicated that the model exhibited a stronger focus on thyroid capsule in patients with CLNM. CONCLUSION: Integrated model can effectively decrease the incidence of missed CLNM and unnecessary CLND. The application of the integrated model can help improve the acceptance of AI-assisted US diagnosis among radiologists.

Expert consensus on perioperative integrated skincare for noninvasive energy-based device aesthetic procedures in clinical practice in China.

BACKGROUND: Noninvasive energy-based device (NI-EBD) aesthetic procedures has recently gained widespread usage for treating various skin conditions, enhancing skin texture and performing rejuvenation-related procedures. However, practically all NI-EBD procedures result in variable degrees of damage to the skin barrier, inducing pathological and physiological processes such as oxidative stress and inflammation, and only a small percentage of individuals possess the innate ability to restore it. OBJECTIVE: To introduce the concept of integrated skincare and establish standardized operational procedures for perioperative integrated skincare, and furnish a theoretical basis for clinical diagnosis and treatment performed by professional medical aestheticians. METHODS: The author leveraged domestic and international guidelines, clinical practice expertise and evidence-based research, adapting them to suit the specific circumstances in China. RESULTS: The consensus were provided four parts, including concept and essence of integrated skincare, integrated skincare significance during the perioperative phase of NI-EBD procedures, active ingredients and functions of effective skincare products, standardized perioperative skincare procedure for NI-EBD procedures and precautions. For the standardized perioperative skincare procedure, four recommendations were listed according to different stages during NI-EBD procedures. CONCLUSION: These recommendations create the 'Expert Consensus on Perioperative Integrated Skincare for Noninvasive Energy-Based Device Aesthetic Procedures in Clinical Practice in China'.

The Size Differences of Breast Cancer and Benign Tumors Measured by Two-Dimensional Ultrasound and Contrast-Enhanced Ultrasound.

OBJECTIVES: Ultrasound (US) imaging has been observed to underestimate tumor size in clinical practice. This study aims to compare the size measurements of breast cancer and benign tumors using two-dimensional ultrasound (2DUS) and contrast-enhanced ultrasound (CEUS). METHODS: The study included 42 clinically confirmed breast cancer and 47 benign breast tumors. Two experienced physicians independently measured the maximal longitudinal and transverse diameters of the masses in 2DUS and CEUS. All analyses were performed in R (4.2.2) and GraphPad Prism 6. RESULTS: The maximal longitudinal and transverse diameters of breast cancer measured by CEUS were 26.61 ± 0.21% and 26.24 ± 0.19% larger compared with 2DUS, and benign breast tumors had an 11.74 ± 0.21% and 11.06 ± 0.14% increase in size compared with 2DUS. The area under the curve (AUC) of the receiver operating characteristic curve (ROC) for the difference between 2DUS and CEUS was 0.870 for longitudinal diameters (95% CI: 0.795-0.945, sensitivity 0.842, specificity 0.783, threshold value 0.215), and 0.863 for transverse diameters (95% CI: 0.785-0.942, sensitivity 0.667, specificity 0.936, threshold value 0.203). CONCLUSIONS: The size measurements of both breast cancer and benign tumors were larger in CEUS compared with 2DUS, with CEUS measurements of breast cancer being more pronounced than those of benign breast tumors. These findings suggest that CEUS may provide a more precise assessment of tumor size, which is crucial for determining optimal treatment strategies and improving patient outcomes in breast cancer management.

Sub-Monolayer SbOx on PtPb/Pt Nanoplate Boosts Direct Formic Acid Oxidation Catalysis.

To promote the commercialization of direct formic acid fuel cell (DFAFC), it is vital to explore new types of direct formic acid oxidation (FAOR) catalysts with high activity and direct pathway. Here, we report the synthesis of intermetallic platinum-lead/platinum nanoplates inlaid with sub-monolayer antimony oxide surface (PtPb/Pt@sub-SbOx NPs) for efficient catalytic applications in FAOR. Impressively, they can achieve the remarkable FAOR specific and mass activities of 28.7 mA cm-2 and 7.2 A mgPt-1, which are 151 and 60 times higher than those of the state-of-the-art commercial Pt/C, respectively. Furthermore, the X-ray photoelectron spectroscopy and X-ray absorption spectroscopy results collectively reveal the optimization of the local coordination environment by the surface sub-monolayer SbOx, along with the electron transfer from Pb and Sb to Pt, driving the predominant dehydrogenation process. The sub-monolayer SbOx on the surface can effectively attenuate the CO generation, largely improving the FAOR performance of PtPb/Pt@sub-SbOx NPs. This work develops a class of high-performance Pt-based anodic catalyst for DFAFC via constructing the unique intermetallic core/sub-monolayer shell structure.

Platinum-Lead-Bismuth/Platinum-Bismuth Core/Shell Nanoplate Achieves Complete Dehydrogenation Pathway for Direct Formic Acid Oxidation Catalysis.

Designing platinum (Pt)-based formic acid oxidation reaction (FAOR) catalysts with high performance and high selectivity of direct dehydrogenation pathway for direct formic acid fuel cell (DFAFC) is desirable yet challenging. Herein, we report a new class of surface-uneven PtPbBi/PtBi core/shell nanoplates (PtPbBi/PtBi NPs) as the highly active and selective FAOR catalysts, even in the complicated membrane electrode assembly (MEA) medium. They can achieve unprecedented specific and mass activities of 25.1 mA cm-2 and 7.4 A mgPt-1 for FAOR, 156 and 62 times higher than those of commercial Pt/C, respectively, which is the highest for a FAOR catalyst by far. Simultaneously, they show highly weak adsorption of CO and high dehydrogenation pathway selectivity in the FAOR test. More importantly, the PtPbBi/PtBi NPs can reach the power density of 161.5 mW cm-2, along with a stable discharge performance (45.8% decay of power density at 0.4 V for 10 h), demonstrating great potential in a single DFAFC device. The in situ Fourier transform infrared spectroscopy (FTIR) and X-ray absorption spectroscopy (XAS) results collectively reveal a local electron interaction between PtPbBi and PtBi. In addition, the high-tolerance PtBi shell can effectively inhibit the production/adsorption of CO, resulting in the complete presence of the dehydrogenation pathway for FAOR. This work demonstrates an efficient Pt-based FAOR catalyst with 100% direct reaction selectivity, which is of great significance for driving the commercialization of DFAFC.

Genome-wide identification and expression patterns of the laccase gene family in response to kiwifruit bacterial canker infection.

BACKGROUND: Kiwifruit bacterial canker, caused by Pseudomonas syringae pv. actinidiae (Psa), is a destructive disease worldwide. Resistance genes that respond to Psa infection urgently need to be identified for controlling this disease. Laccase is mainly involved in the synthesis of lignin in the plant cell wall and plays a prominent role in plant growth and resistance to pathogen infection. However, the role of laccase in kiwifruit has not been reported, and whether laccase is pivotal in the response to Psa infection remains unclear. RESULTS: We conducted a bioinformatics analysis to identify 55 laccase genes (AcLAC1-AcLAC55) in the kiwifruit genome. These genes were classified into five cluster groups (I-V) based on phylogenetic analysis, with cluster groups I and II having the highest number of members. Analysis of the exon-intron structure revealed that the number of exons varied from 1 to 8, with an average of 5 introns. Our evolutionary analysis indicated that fragment duplication played a key role in the expansion of kiwifruit laccase genes. Furthermore, evolutionary pressure analysis suggested that AcLAC genes were under purifying selection. We also performed a cis-acting element analysis and found that AcLAC genes contained multiple hormone (337) and stress signal (36) elements in their promoter regions. Additionally, we investigated the expression pattern of laccase genes in kiwifruit stems and leaves infected with Psa. Our findings revealed that laccase gene expression levels in the stems were higher than those in the leaves 5 days after inoculation with Psa. Notably, AcLAC2, AcLAC4, AcLAC17, AcLAC18, AcLAC26, and AcLAC42 showed significantly higher expression levels (p < 0.001) compared to the non-inoculated control (0 d), suggesting their potential role in resisting Psa infection. Moreover, our prediction indicated that 21 kiwifruit laccase genes are regulated by miRNA397, they could potentially act as negative regulators of lignin biosynthesis. CONCLUSIONS: These results are valuable for further analysis of the resistance function and molecular mechanism of laccases in kiwifruit.

Study on Photochemical Properties of a Sr-SnS2/CaIn2S4 Heterostructure to Improve Cr(VI) Removal.

Compound semiconductor photocatalysis technology is considered to be a promising treatment for solving water problems efficiently. The point of designing high-efficiency catalysts is to optimize the band gap structure and facilitate the separation of charge carriers by establishing new electron migration pathways. Recently, 3D porous CaIn2S4 was found to have good photocatalytic ability. However, the quick recombination and agglomeration of carriers still limit its application. Herein, we prepared a heterostructure by introducing 2D Sr-doped SnS2 to 3D CaIn2S4 by a hydrothermal synthesis method. The optimal dosage of Sr-SnS2 is 3%, and the photocatalytic Cr(VI) removal efficiency of 3% Sr-SnS2/CaIn2S4 (SSCS-3) is 5.82 and 10.83 times those of pure CaIn2S4 and SnS2, respectively. According to the results of characterization tests and calculation verification, we inferred that the enhanced photocatalytic removal of Cr(VI) is due to the introduction of Sr-SnS2 that can promote the rapid transfer of photogenerated electrons to the surface of CaIn2S4, and the heterostructure formed between 2D Sr-SnS2 and 3D CaIn2S4 can also provide abundant reaction sites. The promotion of carrier separation is mainly due to the formation of a built-in electric field of the Sr-SnS2/CaIn2S4 heterostructure. This work provides new ideas and technologies for the treatment of Cr(VI) in wastewater.

Optimal confidence intervals for the relative risk and odds ratio.

The relative risk and odds ratio are widely used in many fields, including biomedical research, to compare two treatments. Extensive research has been done to infer the two parameters through approximate or exact confidence intervals. However, these intervals may be liberal or conservative. A natural question is whether the intervals can be further improved in maintaining the correct confidence coefficient of an approximate interval or shortening an exact but conservative interval. In this article, when two independent binomials are observed we offer an effort to improve any of the existing intervals by applying the h $$ h $$ -function method. In particular, if the given interval is approximate, then the improved interval is exact; if the given interval is exact, then the improved interval is a subset of the given interval. This method is also applied multiple times to the improved intervals until the final resultant interval cannot be shortened any further. To demonstrate the effectiveness of the method, we use three real datasets to illustrate in detail how several good intervals in practice are improved. Two exact intervals are then recommended for estimating each of the two parameters in different scenarios.

Nitrogen and sulfur co-doped Ti3C2Tx MXenes for high-rate lithium-ion batteries.

The electrification of heavy-duty transport and aviation urgently requires new strategies to develop high-rate lithium-ion batteries (LIBs) whose performance fundamentally relies on electrode materials. However, commercially available graphite anodes still suffer from slow kinetics of lithium-ion diffusion and severe safety concerns of lithium plating when achieving the high-rate use goal. Herein, taking Ti3C2Tx as an example, it is demonstrated that N and S co-doping in Ti3C2Tx results in a high-rate MXene anode for LIBs. Nitrogen doping not only flattens the MXene layers and expands the interlayer spacing but also increases the Ti valence state change ability. As evidenced by density functional theory calculations, the diffusion barriers of S-containing Ti3C2Tx MXenes are lower than those of the S-free counterpart, suggesting that S plays an essential role in achieving high-rate performance. Therefore, the N and S co-doped Ti3C2Tx anode in LIBs exhibited excellent performance with a reversible capacity of 113.8 mA h g-1 at a rate of 3C and ∼89% capacity retention after 1000 charge/discharge cycles. The high capacity is attributed to the change in the oxidation states of both Ti and O elements, and the tiny volume change within ∼0.6% upon the stable charging/discharging process accounts for the good capacity retention. When paired up with a LiFe0.5Mn0.5PO4 cathode, the full cell delivers a reversible capacity of 134 mA h g-1 after 1000 cycles at a high rate of 1C. The demonstration of N and S co-doped Ti3C2Tx MXenes in this work may offer a feasible approach for high-rate intercalation anode materials.

Antifungal activity and mechanism of tetramycin against Alternaria alternata, the soft rot causing fungi in kiwifruit.

Kiwifruit rot caused by the fungus Alternaria alternata occurs in many countries, leading to considerable losses during kiwifruit production. In this study, we evaluated the antifungal activity and mechanism of tetramycin against kiwifruit soft rot caused by Alternaria alternata. Tetramycin exerted antifungal effects through the suppression of mycelial growth, conidial germination, and the pathogenicity of A. alternata. Scanning electron microscopic observations revealed that tetramycin destroyed the mycelial structure, causing the mycelia to twist, shrink, and even break. Furthermore, transmission electron microscopy revealed that tetramycin caused severe plasmolysis and a decrease in cell inclusions, and the cell wall appeared thinner with blurred boundaries. In addition, tetramycin destroyed cell membrane integrity, resulting in the leakage of cellular components such as nucleic acids and proteins in mycelial suspensions. Moreover, tetramycin also caused cell wall lysis by enhancing the activities of chitinase and ß-1,3-glucanase and inducing the overexpression of related chitinase gene (Chit) and ß-1,3-glucanase gene (ß-1,3-glu) in A. alternata. In field trials, tetramycin not only decreased the incidence of kiwifruit rot but also create a beneficial living space for kiwifruit growth. Overall, this study indicated that the application of tetramycin could serve as an alternative measure for the management of kiwifruit rot.

Assessment of the Biocontrol Potential of Bacillus velezensis WL-23 against Kiwifruit Canker Caused by Pseudomonas syringae pv. actinidiae.

Kiwifruit canker disease, caused by Pseudomonas syringae pv. actinidiae (Psa), is the main threat to kiwifruit production worldwide. Currently, there is no safe and effective disease prevention method; therefore, biological control technologies are being explored for Psa. In this study, Bacillus velezensis WL-23 was isolated from the leaf microbial community of kiwifruit and used to control kiwifruit cankers. Indoor confrontation experiments showed that both WL-23 and its aseptic filtrate had excellent inhibitory activity against the main fungal and bacterial pathogens of kiwifruit. Changes in OD600, relative conductivity, alkaline proteinase, and nucleic acid content were recorded during Psa growth after treatment with the aseptic filtrate, showing that Psa proliferation was inhibited and the integrity of the cell membrane was destroyed; this was further verified using scanning electron microscopy and transmission electron microscopy. In vivo, WL-23 promoted plant growth, increased plant antioxidant enzyme activity, and reduced canker incidence. Therefore, WL-23 is expected to become a biological control agent due to its great potential to contribute to sustainable agriculture.

Medium/High-Entropy Amalgamated Core/Shell Nanoplate Achieves Efficient Formic Acid Catalysis for Direct Formic Acid Fuel Cell.

High-entropy alloys (HEAs) have been attracting extensive research interests in designing advanced nanomaterials, while their precise control is still in the infancy stage. Herein, we have reported a well-defined PtBiPbNiCo hexagonal nanoplates (HEA HPs) as high-performance electrocatalysts. Structure analysis decodes that the HEA HP is constructed with PtBiPb medium-entropy core and PtBiNiCo high-entropy shell. Significantly, the HEA HPs can reach the specific and mass activities of 27.2 mA cm-2 and 7.1 A mgPt -1 for formic acid oxidation reaction (FAOR), being the record catalyst ever achieved in Pt-based catalysts, and can realize the membrane electrode assembly (MEA) power density (321.2 mW cm-2 ) in fuel cell. Further experimental and theoretical analyses collectively evidence that the hexagonal intermetallic core/atomic layer shell structure and multi-element synergy greatly promote the direct dehydrogenation pathway of formic acid molecule and suppress the formation of CO*.

Facile Synthesis of Highly Dispersed and Well-Alloyed Bimetallic Nanoparticles on Oxide Support.

Supported alloy catalysts play a pivotal role in many heterogeneous catalytic processes of socioeconomic and environmental importance. But the controlled synthesis of supported alloy nanoparticles with consistent composition and tight size distribution remains a challenging issue. Herein, a simple yet effective method for preparation of highly dispersed, homogeneously alloyed bimetallic nanoparticles on oxide supports is reported. This method is based on solid solution of metal cations in parent oxide and strong electrostatic adsorption of a secondary metal species onto the oxide surface. In the reductive annealing process, hydrogen spillover occurs from the surface metal with a higher reduction potential to the solute metal in solid solution, leading to metal exsolution and homogenous alloying of the metals on the oxide surface. The ceria-supported Ni-Pt alloy is chosen as a model catalyst and hydrazine monohydrate decomposition is chosen as a probe reaction to demonstrate this method, and particularly its advantages over the conventional impregnation and galvanic replacement methods. A systematic application of this method using different oxides and base-noble metal pairs further elucidates its applicability and generality.

Electrochemical 5-exo-dig aza-cyclization of 2-alkynylbenzamides toward 3-hydroxyisoindolinone derivatives.

Preparation of biologically relevant 3-hydroxyisoindolinones from readily available 2-alkynylbenzamides is an appealing synthetic approach. However, such kinds of compounds preferably undergo O-attacked 5-exo-dig/6-endo-dig cyclizations. Herein, we report an electrochemically generated amidyl radical proceeding via a highly selective N-attacked 5-exo-dig radical cyclization to form 3-hydroxyisoindolinone derivatives. This reaction features simple operation, good selectivity, and broad substrate scope. Moreover, gram-scale preparation and synthetic elaborations imply the potential applicability of this protocol for the synthesis of diverse isoindolinone derivatives.

The complete chloroplast genome sequences of three lilies: genome structure, comparative genomic and phylogenetic analyses.

We sequenced and analyzed the complete chloroplast genomes of Lilium amoenum, Lilium souliei, and Nomocharis forrestii in detail, including the first sequence and structural comparison of Nomocharis forrestii. We found that the lengths and nucleotide composition of the three chloroplast genes showed little variation. The chloroplast genomes of the three Lilium species contain 87 protein coding genes (PCGs), 38 tRNAs, and 8 rRNA genes. The only difference is that Nomocharis forrestii had an additional infA pseudogene. In the sequence analysis of the Lilium chloroplast genomes, 216 SSRs, 143 pairs of long repeats, 571 SNPs, and 202 indels were detected. In addition, we identified seven hypervariable regions that can be used as potential molecular markers and DNA barcodes of Lilium through complete sequence alignment. The phylogenetic tree was constructed from the three chloroplast genome sequences of Lilium obtained here and 40 chloroplast genome sequences from the NCBI database (including 35 Lilium species, 4 Fritillaria species, and one species of Smilax). The analysis showed that the species clustering of the genus Lilium essentially conformed to the classical morphological classification system of Comber, but differences in the classification of individual species remained. In our report, we support the reclassification of Lilium henryi and Lilium rosthorniiy in the genus Lilium. In general, this study not only provides genome data for three Lilium species, but also provides a comparative analysis of the Lilium chloroplast genomes. These advances will help to identify Lilium species, clarify the phylogenetic analysis of the Lilium genus, and help to solve and improve the disputes and deficiencies in the traditional morphological classification.

Modulation of broiler plasma metabolic spectrum by the addition of lysine residue to the diet.

Flavour is an important factor in evaluating meat quality, and amino acids and fats are important components affecting meat flavour. In this study, we evaluated the relationship between the variation of lysine residue addition and the slaughter performance and meat quality of broilers, which decreased with the addition of lysine residues but improved the meat quality of the broilers. 10% lysine residue addition was the most beneficial for reducing feed cost and improving meat quality. Meanwhile, the plasma metabolites of broilers fed increasing concentrations of lysine residue supplemented feeds were analysed using liquid chromatography-mass spectrometry (LC-MS). Principal component analysis (PCA) and partial least square discriminant analysis (OPLS-DA) were used screen, the differential metabolites induced by lysine residue. In the broilers 29, 37, 63, 87, 80 and 111 differential metabolites were detected (p < 0.05). Amongst them, 3-iodotyrosine, N-methyl-L-glutamic acid, coumaraldehyde, 2-dimethylphenol, N-methylnicotinamide and L-erythrone were the common differential metabolites between group A and groups B, C, D, E, F and G. The addition of lysine residue was positively correlated with alanine aminotransferase (p < 0.05, r = 0.942) and high-density lipoprotein cholesterol (p < 0.05, r = 0.798) and negatively correlated with aspartate aminotransferase (p < 0.05, r = 0.822). According to the classification of differential metabolites and their enriched pathway analysis, differential metabolites mainly caused changes in amino acid and lipid metabolism. Our study shows that a certain proportion of lysine residue in diet affects the specific metabolic pathway of broilers, which may affect amino acid and fat metabolism by regulating alanine aminotransferase, aspartate aminotransferase and high-density lipoprotein cholesterol, ultimately affecting the flavour.

Electrochemical Migratory Cyclization of N-Acylsulfonamides.

Benzoxathiazine dioxide, as a bioisostere of the clinically widely used diazoxide, exhibits interesting biological activity. However, limited success has been achieved in terms of its concise and direct synthesis. We report herein a facile electrochemical migratory cyclization of N-acylsulfonamides to access a diverse array of benzoxathiazine dioxides. The inclusion of electrochemistry is crucial for realizing such a novel transformation, which is substantiated both by the experiments and density-functional-theory calculations.

The consensus Nglyco -X-S/T motif and a previously unknown Nglyco -N-linked glycosylation are necessary for growth and pathogenicity of Phytophthora.

Asparagine (Asn, N)-linked glycosylation within Nglyco -X-S/T; X ≠ P motif is a ubiquitously distributed post-translational modification that participates in diverse cellular processes. In this work, N-glycosylation inhibitor was shown to prevent Phytophthora sojae growth, suggesting that N-glycosylation is necessary for oomycete development. We conducted a glycoproteomic analysis of P. sojae to identify and map N-glycosylated proteins and to quantify differentially expressed glycoproteins associated with mycelia, asexual cyst, and sexual oospore developmental stages. A total of 355 N-glycosylated proteins was found, containing 496 glycosites, potentially involved in glycan degradation, carbon metabolism, glycolysis, or other metabolic pathways. Through PNGase F deglycosylation assays and site-directed mutagenesis of a GPI transamidase protein (GPI16) upregulated in cysts and a heat shock protein 70 (HSP70) upregulated in oospores, we demonstrated that both proteins were N-glycosylated and that the Nglyco -N motif is a target site for asparagine - oligosaccharide linkage. Glycosite mutations of Asn 94 Nglyco -X-S/T in the GPI16 led to impaired cyst germination and pathogenicity, while mutation of the previously unknown Asn 270 Nglyco -N motif in HSP70 led to decreased oospore production. In addition to providing a map of the oomycete N-glycoproteome, this work confirms that P. sojae has evolved multiple N-glycosylation motifs essential for growth.

Understanding charge storage in Nb2CTx MXene as an anode material for lithium ion batteries.

MXenes represent an emerging family of two-dimensional materials of transition metal carbides/carbonitrides terminated with functional groups like -O, -OH, and -F on the chemically active surface of MX slabs. As a member of the family, Nb2CTx exhibits superior lithium storage capacity over most of the other MXenes as anode materials in lithium-ion batteries (LIBs). However, an in-depth understanding of the charge storage mechanism is still lacking so far. Here, through combining complementary experiments and density functional theory calculations, we provide insights into the (de)lithiation process. Specifically, Nb2CTx with dominant -O functional groups stores charge as a result of changes in the oxidation states of both transition metals Nb and O, which is supported by Bader charge analysis showing a significant change in the oxidation states of Nb and O upon lithiation. As monitored by ex situ X-ray diffraction, the interlayer spacing of Nb2CTx changes slightly upon lithium ion (de)intercalation, corresponding to a volume change of only 2.3% with a near zero-strain feature. By coupling with a LiFePO4/C cathode, the full cell presents superior rate capability and cycling stability as well. The insights into the charge storage mechanism of Nb2CTx in this work provide useful guidance for the rational design of MXene-based anode materials for high-performance LIBs.