RESUMEN
Selective catalytic reduction of nitrogen oxides with NH3 at low temperatures remains a key goal for industrial applications. However, effective catalysts operating at 90 oC are rarely reported, limiting SCR scenarios to high-temperature conditions. Herein, we report a unique MnO2 nanofilament catalyst grown on activated semi-coke synthesized via a one-step in situ hydrothermal approach, which exhibits a stable and marked 100% conversion rate of NO to N2 with 100% selectivity at 90 oC, superior to the other prepared structures (nanowires, nanorods, and nanotubes). Temperature-programmed desorption shows a large number of acid sites on MnO2(NFs)/ASC, benefiting the formation of NH4+ ions. Meanwhile, diffuse reflectance infrared Fourier transform spectroscopy reveals the activation of NO with O2 to form bidentate nitrate/bridging nitrate NO2 intermediates via bidentate nitrate species, triggering the Fast SCR with NH3 at low temperatures. Such an effective, easy-to-prepare, and low-cost catalyst paves a new pathway for low-temperature SCR for a wide range of application scenarios.
RESUMEN
PURPOSE OF REVIEW: The purpose of this review was to describe the characteristics of breast cancer cells prone to developing bone metastasis and determine how they are regulated by the bone microenvironment. RECENT FINDINGS: The bone is a site of frequent breast cancer metastasis. Bone metastasis accounts for 70% of advanced breast cancer cases and remains incurable. It can lead to skeletal-related events, such as bone fracture and pain, and seriously affect the quality of life of patients. Breast cancer cells escape from the primary lesion and spread to the bone marrow in the early stages. They can then enter the dormant state and restore tumourigenicity after several years to develop overt metastasis. In the last few years, an increasing number of studies have reported on the factors promoting bone metastasis of breast cancer cells, both at the primary and metastatic sites. Identifying factors associated with bone metastasis aids in the early recognition of bone metastasis tendency. How to target these factors and minimize the side effects on the bone remains to be further explored.
Asunto(s)
Neoplasias Óseas , Neoplasias de la Mama , Humanos , Femenino , Neoplasias de la Mama/patología , Calidad de Vida , Neoplasias Óseas/secundario , Huesos/patología , Médula Ósea/patología , Microambiente TumoralRESUMEN
Developing efficient and earth-abundant catalysts for CO2 fixation to high value-added chemicals is meaningful but challenging. Styrene carbonate has great market value, but the cycloaddition of CO2 to styrene oxide is difficult due to the high steric hindrance and weak electron-withdrawing ability of the phenyl group. To utilize clean energy (such as optical energy) directly and effectively for CO2 value-added process, we introduce earth-abundant Ti single-atom into the mesoporous nitrogen, oxygen-doped carbon nanosheets (Ti-CNO) by a two-step method. The Ti-CNO exhibits excellent photothermal catalytic activities and stability for cycloaddition of CO2 and styrene oxide to styrene carbonate. Under light irradiation and ambient pressure, an optimal Ti-CNO produces styrene carbonate with a yield of 98.3 %, much higher than CN (27.1 %). In addition, it shows remarkable stability during 10 consecutive cycles. Its enhanced catalytic performance stems from the enhanced photothermal effect and improved Lewis acidic/basic sites exposed by the abundant mesopores. The experiments and theoretical simulations demonstrate the styrene oxideâ + and CO2â - radicals generated at the Lewis acidic (Tiδ+) and basic sites of Ti-CNO under light irradiation, respectively. This work furnishes a strategy for synthesizing advanced single-atom catalysts for photo-thermal synergistic CO2 fixation to high value products via a cycloaddition pathway.
RESUMEN
BACKGROUND: Patient-specific instrumentation (PSI) has the potential to improve the accuracy of implant positioning in total hip arthroplasty (THA). This prospective clinical study aimed to develop artificial intelligence to increase PSI production efficiency and assess accuracy, clinical outcomes, and learning curves. METHODS: A convolutional neural network was applied to automatically process computer tomography images. PSI size and position were designed to guide the acetabular preparation and femoral neck resection. Thirty patients who underwent PSI-assisted THAs were matched to thirty patients who underwent free-hand THAs, and the component positions, as well as radiographic and clinical outcomes were analyzed. RESULTS: PSI-assisted THA was significantly more accurate than free-hand THA at achieving the target component position. The mean absolute errors of cup inclination (P = .004) and anteversion (P < .001) were significantly smaller in the PSI group with fewer outliers. Calcar length (P = .002) and neck length (P = .026) were also more accurate in the PSI group. The leg length discrepancy was significantly lower in the PSI group (P = .002). There were no significant differences in operation time, blood loss, leg length discrepancy, or cup position among the first, second, and last 10 cases. CONCLUSION: PSI-assisted THA offered more accurate component positions and better radiographic outcomes than free-hand THA. There was no evidence of a learning curve. Our findings suggest that PSI is a convenient and practical option to help surgeons achieve accurate surgical outcomes.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Humanos , Inteligencia Artificial , Estudios Prospectivos , Acetábulo/diagnóstico por imagen , Acetábulo/cirugía , Estudios RetrospectivosRESUMEN
BACKGROUND: This study aimed to investigate the relationship between acetabular width, three-dimensional (3D) simulation, and surgical results in total hip arthroplasty patients who have developmental dysplasia of the hip (DDH). METHODS: This retrospective study included 216 DDH cases. Inner and outer acetabular width (OAW) was measured at the plane passing through the center of acetabular fossa. 3D simulation and 2D standard templating were performed. The actual cup size and the use of augments during surgery were recorded. Association among the indices and their distribution in different types of DDH were analyzed. RESULTS: A difference of 13 to 14 millimeters (mm) was found between the inner acetabular width and actual cup size used in type II, III, and IV cases, while the difference was 0.2 to 3.6 mm for OAW. The accuracy of 2D templating and 3D simulation in predicting cup size was comparable in Crowe type I (86.5 versus 76%, P = .075), type II (72.7 versus 51.5%, P = .127), and type III (93.3 versus 66.7%, P = .169). The 3D simulation was significantly more accurate in Crowe type IV (89.1% versus 60.9%, P = .001). Augments and bone grafts were significantly more commonly used in type II (25%) than in the other types (0 to 6.5%). CONCLUSION: OAW more accurately predicted actual cup size than inner acetabular width. The supero-lateral acetabular bone defects in type II cases require additional attention. Compared with 2D templating, 3D simulation is more accurate in predicting actual cup size in dysplastic hips with severe deformity and may be recommended in these selected cases, especially for Crowe IV patients.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Luxación Congénita de la Cadera , Prótesis de Cadera , Humanos , Estudios Retrospectivos , Acetábulo/cirugía , Artroplastia de Reemplazo de Cadera/métodos , Simulación por Computador , Luxación Congénita de la Cadera/cirugíaRESUMEN
Photocatalytic water splitting is a promising approach to generating sustainable hydrogen. However, the transport of photoelectrons to the catalyst sites, usually within ps-to-ns timescales, is much faster than proton delivery (â¼µs), which limits the activity. Therefore, the acceleration of abstraction of protons from water molecules towards the catalytic sites to keep up with the electron transfer rate can significantly promote hydrogen production. The photobasic effect that is the increase in proton affinity upon excitation offers means to achieve this objective. Herein, we design photobasic carbon dots and identify that internal pyridinic N sites are intrinsically photobasic. This is supported by steady-state and ultrafast spectroscopic measurements that demonstrate proton abstraction within a few picoseconds of excitation. Furthermore, we show that in water, they form a unique four-level lasing scheme with optical gain and stimulated emission. The latter competes with photocatalysis, revealing a rather unique mechanism for efficiency loss, such that the stimulated emission can act as a toggle for photocatalytic activity. This provides additional means of controlling the photocatalytic process and helps the rational design of photocatalytic materials.
RESUMEN
Mn-doping in cesium lead halide perovskite nanoplatelets (NPls) is of particular importance where strong quantum confinement plays a significant role towards the exciton-dopant coupling. In this work, we report an immiscible bi-phasic strategy for post-synthetic Mn-doping of CsPbX3 (X=Br, Cl) NPls. A systematic study shows that electron-donating oleylamine acts as a shuttle ligand to transport MnX2 through the water-hexane interface and deliver it to the NPls. The halide anion also plays an essential role in maintaining an appropriate radius of Mn2+ and thus fulfilling the octahedral factor required for the formation of perovskite crystals. By varying the thickness of parent NPls, we can tune the dopant incorporation and, consequently, the exciton-to-dopant energy transfer process in doped NPls. Time-resolved optical measurements offer a detailed insight into the exciton-to-dopant energy transfer process. This new approach for post-synthetic cation doping paves a way towards exploring the cation exchange process in several other halide perovskites at the polar-nonpolar interface.
RESUMEN
BACKGROUND: Fibrinogen (Fbg) and D-dimer have been used as biomarkers for the diagnosis of periprosthetic joint infection (PJI). However, previous research has reported conflicting results on the diagnostic value of D-dimer in comparison to Fbg, C-reactive protein (CRP), and erythrocyte sedimentation rate (ESR). AIM: This study aimed to: (1) determine the optimal threshold of plasma Fbg and D-dimer in the diagnosis of PJI and compare their diagnostic value to that of CRP and ESR; and (2) investigate whether Fbg and D-dimer perform differently than CRP and ESR as diagnostic indicators for different types of PJI. METHODS: A total of 115 revision cases after total hip arthroplasty (THA) and total knee arthroplasty (TKA) were identified. Based on demographic characteristics, 25 culture-positive cases were matched to 50 culture-negative cases using propensity score matching. Sensitivity, specificity, receiver operating characteristics (ROC), negative predictive value (NPV), and positive predictive value (PPV) were calculated and compared. RESULTS: The optimal thresholds were 2.72 mg/L for D-dimer, 3.655 g/L for Fbg, 12.64 mg/L for CRP, and 27 mm/h for ESR. Levels of plasma Fbg, D-dimer, CRP, and ESR were significantly higher in the culture-positive group than the culture-negative group. Fbg, D-dimer, CRP, and ESR showed sensitivity of 0.92, 0.56, 0.92, and 0.88, respectively, and showed specificity of 0.84, 0.96, 0.94, and 0.80, respectively. The ROC curve showed that CRP has the highest area under the curve (AUC) (0.94), followed by Fbg (0.90), ESR (0.87), and D-dimer (0.81). CONCLUSIONS: Plasma Fbg exhibited a similar diagnostic performance compared to CRP and ESR in predicting culture-positive results in PJI. Plasma D-dimer showed high specificity but low sensitivity. In our study, Fbg and D-dimer did not show better diagnostic performance with different pathogens and different types of PJI. Further studies are required to investigate the difference between serum D-dimer and plasma D-dimer in the arthroplasty population.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Infecciones Relacionadas con Prótesis , Artroplastia de Reemplazo de Cadera/efectos adversos , Biomarcadores , Sedimentación Sanguínea , Proteína C-Reactiva/análisis , Productos de Degradación de Fibrina-Fibrinógeno , Fibrinógeno , Humanos , Puntaje de Propensión , Infecciones Relacionadas con Prótesis/diagnóstico , Infecciones Relacionadas con Prótesis/cirugía , Estudios Retrospectivos , Sensibilidad y EspecificidadRESUMEN
BACKGROUND: Whether neutral alignment brings better clinical outcomes is controversial. Consideration of the preoperative knee condition of patients and some limitations of previous studies, we suggested that other index may be more important than a generic target of 0° ± 3° of a neutral axis to reflect changes in coronal alignment after total knee replacement (TKR). The purpose of this study was to explore the relationship between alignment and functional outcome with a new grouping method and the concept of correction rate. METHODS: The study included 358 knees, the mean follow-up period was 3.62 years. A new grouping method was adopted to divide patients into three groups based on the degree of correction of mechanical femoral-tibial angle (MFTA): under-correction (n = 128), neutral (n = 209) and over-correction (n = 21). Hospital for Special Surgery (HSS) score were compared among the 3 groups (ANOVA with or without LSD t-test). In addition, we also attempt to further explore whether the concept of correction rate can predict postoperative functional score (Simple linear correlation analysis). RESULTS: HSS score showed significant improvement in all groups. There was no difference in HSS score (88.27 vs 88 vs 85.62) (p = 0.88) or incremental scores (26.23 vs 25.22 vs 22.88) (p = 0.25) based on the postoperative alignment category for the degree of correction of MFTA at the last follow-up. The correlational analyses also didn't show any positive results (r = -0.01 p = 0.95, r = -0.01 p = 0.97, r = 0.11 p = 0.15, r = 0.01 p = 0.90). CONCLUSION: Categorization of optimal coronal alignment after TKR may be impractical. But we still believe that the concept of correction rate and new grouping method are worthy of research which can reflects the preoperative knee condition and the change of coronal alignment. Perhaps it can be better used in TKR in the future. LEVEL OF EVIDENCE: III.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Osteoartritis de la Rodilla , Humanos , Articulación de la Rodilla/cirugía , Osteoartritis de la Rodilla/cirugía , Estudios Retrospectivos , Tibia/cirugíaRESUMEN
Hepatocellular carcinoma (HCC) is the fifth most common cancer worldwide. Studies have shown that bradykinin (BK) is highly expressed in liver cancer. We designed the novel BK receptor inhibitors J051-71 and J051-105, which reduced the viability of liver cancer cells and inhibited the formation of cancer cell colonies. J051-71 and J051-105 reduced cell proliferation and induced apoptosis in HepG2 and BEL-7402 cells, which may be due to the inhibition of the extracellular regulated protein kinase (ERK) signaling pathway. In addition, these BK receptor inhibitors reversed the cell proliferation induced by BK in HepG2 and BEL-7402 cells by downregulating B1 receptor expression. Inhibiting B1 receptor expression decreased the protein levels of p-ERK and reduced the malignant progression of HCC, providing a potential target for HCC therapy.
Asunto(s)
Antineoplásicos/farmacología , Apoptosis/efectos de los fármacos , Antagonistas de los Receptores de Bradiquinina/farmacología , Carcinoma Hepatocelular/metabolismo , Proliferación Celular/efectos de los fármacos , Neoplasias Hepáticas/metabolismo , Antagonistas de los Receptores de Bradiquinina/síntesis química , Antagonistas de los Receptores de Bradiquinina/química , Carcinoma Hepatocelular/tratamiento farmacológico , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Quinasas MAP Reguladas por Señal Extracelular/metabolismo , Humanos , Concentración 50 Inhibidora , Neoplasias Hepáticas/tratamiento farmacológico , Sistema de Señalización de MAP Quinasas/efectos de los fármacosRESUMEN
It usually requires high temperature and high pressure to reform methanol with water to hydrogen with high turnover frequency (TOF). Here we show that hydrogen can be produced from alkaline methanol on a light-triggered multi-layer system with a very high hydrogen evolution rate up to ca. 1â µmol s-1 under the illumination of a standard Pt-decorated carbon nitride. The system can achieve a remarkable TOF up to 1.8×106 â moles of hydrogen per mole of Pt per hour under mild conditions. The total turnover number (TTN) of 470 000 measured over 38â hours is among the highest reported. The system does not lead to any COx emissions, hence it could feed clean hydrogen to fuel cells. In contrast to a slurry system, the proposed multi-layer system avoids particle aggregation and effectively uses light and Pt active sites. The performance is also attributed to the light-triggered reforming of alkaline methanol. This notable performance is a promising step toward practical light-driven hydrogen generation.
RESUMEN
Artificial photosynthesis of alcohols from CO2 is still unsatisfactory owing to the rapid charge relaxation compared to the sluggish photoreactions and the oxidation of alcohol products. Here, we demonstrate that CO2 is reduced to methanol with 100 % selectivity using water as the only electron donor on a carbon nitride-like polymer (FAT) decorated with carbon dots. The quantum efficiency of 5.9 % (λ=420â nm) is 300 % higher than the previously reported carbon nitride junction. Using transient absorption spectroscopy, we observed that holes in FAT could be extracted by the carbon dots with nearly 75 % efficiency before they become unreactive by trapping. Extraction of holes resulted in a greater density of photoelectrons, indicative of reduced recombination of shorter-lived reactive electrons. This work offers a strategy to promote photocatalysis by increasing the amount of reactive photogenerated charges via structure engineering and extraction before energy losses by deep trapping.
RESUMEN
Visible light-driven water splitting using cheap and robust photocatalysts is one of the most exciting ways to produce clean and renewable energy for future generations. Cutting edge research within the field focuses on so-called "Z-scheme" systems, which are inspired by the photosystem II-photosystem I (PSII/PSI) coupling from natural photosynthesis. A Z-scheme system comprises two photocatalysts and generates two sets of charge carriers, splitting water into its constituent parts, hydrogen and oxygen, at separate locations. This is not only more efficient than using a single photocatalyst, but practically it could also be safer. Researchers within the field are constantly aiming to bring systems toward industrial level efficiencies by maximizing light absorption of the materials, engineering more stable redox couples, and also searching for new hydrogen and oxygen evolution cocatalysts. This review provides an in-depth survey of relevant Z-schemes from past to present, with particular focus on mechanistic breakthroughs, and highlights current state of the art systems which are at the forefront of the field.
RESUMEN
BACKGROUND: High tibial osteotomy is commonly performed in young patients with high activity demand. Several studies have reported outcome of HTO. The reported 10-year survival ranged from 79 to 97.6%. The reported 15-year survival ranged from 56 to 65.5%, resulting in the need for conversion to TKA. Primary TKA now provides satisfactory long-term outcome in terms of function and survival. Researches have been conducted to compare clinical outcome between primary TKA and TKA after HTO to see if TKA should be the prior treatment rather than HTO in some cases. But the results were inconsistent. This study aims to compare the risk of revision and other parameters between total knee arthroplasty after high tibial osteotomy and primary total knee arthroplasty. METHODS: Searches and screens of the relevant literature were conducted, after which data were extracted and pooled analysis was performed to compare the clinical outcomes between the two groups. RESULTS: A total of 14 studies with 144,692 cases were included. Pooled analysis showed significantly more revisions and complications, and more tibial component loosening and impingement in postoperative X-ray in the HTO-TKA group. Surgical complexity during conversion to total knee arthroplasty was summarised and listed in table. CONCLUSION: High tibial osteotomy offers satisfactory pain relief and functional outcome in selected patients with high activity demand. However, the need for subsequent TKA should be noted, which might be a technically challenging procedure with significantly higher risk of revision comparing to primary TKA.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/métodos , Osteoartritis de la Rodilla/cirugía , Osteotomía/métodos , Reoperación/métodos , Tibia/cirugía , Humanos , Articulación de la Rodilla/cirugía , Manejo del Dolor/métodos , Complicaciones Posoperatorias , Radiografía , Riesgo , Resultado del TratamientoRESUMEN
BACKGROUND: In 2013, denosumab was introduced as peri-operative adjuvant treatment for giant cell tumor (GCT) of bone as it inhibits osteoclast activity. It is suggested that denosumab relives pain, facilitate curettage in lesions requiring resection initially. However, controversy remains whether denosumab increases the risk of local recurrence after surgery. METHODS: Medline, Embase and the Cochrane Library were comprehensively searched in June 2019 to identify studies investigating the clinical outcome of GCT of bone with and without peri-operative denosumab after surgery. Data were gathered and a meta-analysis was conducted. RESULT: Ten studies with 1082 cases (169 in denosumab group, 913 in control group) were included. Overall, denosumab was associated with significantly higher risk of recurrence(P < 0.02) and inferior 5 year recurrence free survival(P = 0.000). Denosumab and curettage has a relatively higher risk of recurrence comparing to curettage alone(P = 0.07). The risk of recurrence is not significantly increased if denosumab was administered both preoperatively and postoperatively(P = 0.24). CONCLUSION: Administration of denosumab is associated with increased risk of recurrence due to a variety of reasons, though it is proven effective in relieving pain, enabling curettage and improved functional outcome. Post-operative denosumab is recommended as it continuously suppress/eliminate residue tumor cells.
Asunto(s)
Conservadores de la Densidad Ósea/efectos adversos , Neoplasias Óseas/cirugía , Denosumab/efectos adversos , Tumor Óseo de Células Gigantes/cirugía , Recurrencia Local de Neoplasia/etiología , Cuidados Preoperatorios/métodos , Neoplasias Óseas/epidemiología , Estudios de Seguimiento , Tumor Óseo de Células Gigantes/epidemiología , Humanos , Incidencia , Estudios Retrospectivos , Riesgo , Resultado del TratamientoRESUMEN
Carbon nitride (g-C3N4) as a benchmark polymer photocatalyst is attracting significant research interest because of its visible light photocatalytic performance combined with good stability and facile synthesis. However, little is known about the fundamental photophysical processes of g-C3N4, which are key to explain and promote photoactivity. Using time-resolved absorption and photoluminescence spectroscopies, we have investigated the photophysics of a series of carbon nitrides on time scales ranging from femtoseconds to seconds. Free charge carriers form within a 200 fs excitation pulse, trap on the picosecond time scale with trap states in a range of energies, and then recombine with power law decays that are indicative of charge trapping-detrapping processes. Delayed photoluminescence is assigned to thermal excitation of trapped carriers back up to the conduction/valence bands. We develop a simple, quantitative model for the charge carrier dynamics in these photocatalysts, which includes carrier relaxation into an exponential tail of trap states extending up to 1.5 eV into the bandgap. This trapping reduces the efficiency of surface photocatalytic reactions. Deep trapped electrons observed on micro- to millisecond time scales are unable to reduce electron acceptors on the surface or in solution. Within a series of g-C3N4, the yield of these unreactive trapped electrons correlates inversely with H2 evolution rates. We conclude by arguing that the photophysics of these carbon nitride materials show closer parallels with inorganic semiconductors than conjugated polymers, and that the key challenge to optimize photocatalytic activity of these materials is to prevent electron trapping into deep, and photocatalytically inactive, electron trap states.
RESUMEN
A metal-free photoanode nanojunction architecture, composed of B-doped carbon nitride nanolayer and bulk carbon nitride, was fabricated by a one-step approach. This type of nanojunction (s-BCN) overcomes a few intrinsic drawbacks of carbon nitride film (severe bulk charge recombination and slow charge transfer). The top layer of the nanojunction has a depth of ca. 100â nm and the bottom layer is ca. 900â nm. The nanojunction photoanode results into a 10-fold higher photocurrent than bulk graphitic carbon nitride (G-CN) photoanode, with a record photocurrent density of 103.2â µA cm-2 at 1.23â V vs. RHE under one sun irradiation and an extremely high incident photon-to-current efficiency (IPCE) of ca. 10 % at 400â nm. Electrochemical impedance spectroscopy, Mott-Schottky plots, and intensity-modulated photocurrent spectroscopy show that such enhancement is mainly due to the mitigated deep trap states, a more than 10 times faster charge transfer rate and nearly three times higher conductivity due to the nanojunction architecture.
RESUMEN
BACKGROUND: Reconstruction of extensive defects remains challenging for plastic surgeons. We report our experience with extensive defect reconstruction using multiple perforator propeller flaps and provide a systematic review of the literature on this approach. METHODS: This retrospective study included patients who underwent defect reconstruction with multiple perforator propeller flaps from 2014 to 2021. A systematic review was conducted by retrieving studies on reconstructive strategy from PubMed, Web of Science, EMBASE, and Scopus published before December 1, 2022. RESULTS: Thirty patients underwent defect reconstruction using 65 perforator propeller flaps. The posterior trunk (66.7%) was the most common site of defects. Complete flap survival was achieved in 61 flaps (93.8%). Partial necrosis of four flaps in three patients and venous congestion of one flap resulted in an overall complication rate of 13.3%. One flap experienced distal tip necrosis in 21 patients undergoing posterior trunk or perineal defect reconstruction, leading to an overall complication rate of 4.7%. Other complications were observed during the reconstruction of defects in the lower extremities (one of five patients) and anterior trunk (two of four patients). In the systematic review, 11 articles involving 74 patients were identified. The commonly reported locations of the defects were the perineum (55.4%) and posterior trunk (33.8%). Flap-related complications included venous congestion, and no flaps were lost. CONCLUSIONS: This study on the use of multiple perforator propeller flaps in a jigsaw puzzle approach demonstrated that the method can be effectively used for extensive posterior trunk and perineal defect reconstruction.
RESUMEN
BACKGROUND: Postburn axillary contracture is a common complication that leads to functional impairment and unsatisfactory aesthetic outcomes. This article aims to present our experience with axillary contracture reconstruction using pre-expanded brachial artery perforator propeller (BAPP) flaps and provide a systematic review of other regional or free flaps. METHODS: This retrospective study included patients who underwent postburn axillary contracture reconstruction using pre-expanded BAPP flaps from 2015 to 2022. Data on the flap characteristics and function of the affected shoulders were recorded. A systematic review was conducted by retrieving studies that assessed the outcomes of regional or free cutaneous/fasciocutaneous flaps for treating axillary contracture from PubMed, Web of Science, EMBASE, and Scopus published before October 1, 2023. RESULTS: Twelve pre-expanded BAPP flaps measuring up to 26 cm × 11 cm (mean, 116.9 cm 2) survived completely with no major complications, and the donor sites were closed primarily. The average range of shoulder abduction increased from 77.9° to 141.7° (p=0.002). The systematic review included 34 articles, reporting 12 regional and three free flaps. The most reported flaps were the thoracodorsal artery perforator flap, scapular flap, and parascapular flap. The overall complication rate ranged from 0 to 25%, and the average change in shoulder abduction ranged from 72.5° to 99.4°. CONCLUSIONS: Pre-expanded BAPP flaps can be effectively used for reconstructing postburn anterior axillary fold contracture. The donor site availability and the specific axillary contracture type should be considered when selecting a regional or free flap.
RESUMEN
PURPOSE: To investigate the factors affecting footplate position and its influence on vault characteristics following implantable collamer lens (ICL) implantation. SETTING: Hunan Provincial People's Hospital, Changsha, China. DESIGN: Retrospective case series. METHODS: This study included 124 patients (124 eyes). Ultrasound biomicroscopy (UBM) was performed to assess the iris and ciliary body morphologies and observe the footplate position. Using multiple linear regression, the relationship between various ocular and ICL parameters and the vault as well as the factors affecting the footplate distance (FD) were analyzed. Based on the FD, three groups were formed: group 1 (<500 µm), group 2 (500-1000 µm), and group 3 (>1000 µm). The distribution of the vault range after surgery was observed for the three groups. RESULTS: Ciliary sulcus angle and FD significantly impacted the vault (adjusted R2=0.190, F=6.763, P<0.001), with FD being the most important factor influencing the vault (Beta=-0.383, P<0.001). Postoperative UBM revealed that the footplate was located at different positions in the posterior chamber, with the majority (52%) being located on the ciliary body. The average size of the four footplate orientations was 0.88±0.24 mm. Multiple linear regression analysis revealed that ciliary body thickness (CBT), iris curvature (IC), and ICL iris contact length (IRCL) significantly influenced the FD (adjusted R2=0.373, F=11.432, P<0.001). The vault range differed significantly among the three groups (X2=32.33, P<0.001). CONCLUSIONS: Different postoperative ICL footplate positions significantly affect the vault. CBT, IC, and IRCL can alter the position of the footplate from the expected position. This study provides reference for ICL size selection and vault prediction.