Optimization of irrigation and fertilization of apples under magnetoelectric water irrigation in extremely arid areas.

Apple (Malus pumila Mill.) is one of the important economic crops in the arid areas of Xinjiang, China. For a long time, there has been a problem of high consumption but low yield in water and fertilizer management, prevent improvements in apple quality and yield. In this study, 5-year-old 'Royal Gala' apple trees in extremely arid areas of Xinjiang were used as experimental materials to carry out field experiments. considering 5 irrigation levels (W1, 30 mm; W2, 425 mm; W3, 550 mm; W4, 675 mm; W5, 800 mm) and 5 fertilization levels (F1, 280 kg·ha-1; F2, 360 kg·ha-1; F3, 440 kg·ha-1; F4, 520 kg·ha-1; F5, 600 kg·ha-1) under magnetoelectric water irrigation conditions. The results demonstrated that magnetoelectric water combined with the application of 675 mm irrigation amount and 520 kg·ha-1 fertilization amount was the most effective combination. These results occurred by increasing net photosynthetic rate of apple leaves, improved the quality of apples, increased apple yield, and promoted the improvement of water and fertilizer use efficiency. Additionally, the quadratic regression model was used to fit the response process of yield, IWUE and PFP to irrigation amount and fertilization amount, and the accuracy was greater than 0.8, indicating good fitting effects. The synergistic effect of water and fertilizer has a positive effect on optimizing apple water and fertilizer management. Principal component analysis showed that the magnetoelectric treatment combined water and fertilizer mainly affected apple yield, water and fertilizer use efficiency and vitamin C content related to quality. This study provides valuable guidance for improving water and fertilizer productivity, crop yield and quality in extreme arid areas of Xinjiang by using Magnetoelectric water irrigation.

Multi-objective optimization of the cavitation generation unit structure of an advanced rotational hydrodynamic cavitation reactor.

Hydrodynamic cavitation (HC) has been widely considered a promising technique for industrial-scale process intensifications. The effectiveness of HC is determined by the performance of hydrodynamic cavitation reactors (HCRs). The advanced rotational HCRs (ARHCRs) proposed recently have shown superior performance in various applications, while the research on the structural optimization is still absent. The present study, for the first time, identifies optimal structures of the cavitation generation units of a representative ARHCR by combining genetic algorithm (GA) and computational fluid dynamics, with the objectives of maximizing the total vapor volume, Vvapor , and minimizing the total torque of the rotor wall, M→z . Four important geometrical factors, namely, diameter (D), interaction distance (s), height (h), and inclination angle (θ), were specified as the design variables. Two high-performance fitness functions for Vvapor and M→z were established from a central composite design with 25 cases. After performing 10,001 simulations of GA, a Pareto front with 1630 non-dominated points was obtained. The results reveal that the values of s and θ of the Pareto front concentrated on their lower (i.e., 1.5 mm) and upper limits (i.e., 18.75°), respectively, while the values of D and h were scattered in their variation regions. In comparison to the original model, a representative global optimal point increased the Vvapor by 156% and decreased the M→z by 14%. The corresponding improved mechanism was revealed by analyzing the flow field. The findings of this work can strongly support the fundamental understanding, design, and application of ARHCRs for process intensifications.

Immunoreactivity and neutralization study of Chinese Bungarus multicinctus antivenin and lab-prepared anti-bungarotoxin antisera towards purified bungarotoxins and snake venoms.

Bungarus multicinctus is the most venomous snake distributed in China and neighboring countries of Myanmar, Laos, north Vietnam and Thailand. The high mortality rate of B. multicinctus envenomation is attributed to the lethal components of α-, ß-, γ- and κ- bungarotoxins contained in the venom. Although anti-B. multicinctus sera were produced in Shanghai, Taiwan and Vietnam, the most widely clinic used product was term as B. multicinctus antivenin and manufactured by Shanghai Serum Bio-technology Co. Ltd. In the present investigation, high purity α-, ß- and γ-bungarotoxins were separately isolated from B. multicinctus crude venom. Rabbit anti- α-, ß- and γ-bungarotoxin antisera were prepared by common methods, respectively. LD50 values of α-, ß- and γ-bungarotoxins were systematically determined via three administration pathways (intraperitoneal, intramuscular and intravenous injections) in Kunming mice. LD50 values of ß-bungarotoxin were closely related with injection routines but those of both α- and γ-bungarotoxins were not dependent on the injection routines. Commercial B. multicinctus antivenin showed strong immunoreaction with high molecular weight fractions of the B. multicinctus but weakly recognized low molecular weight fractions like α- and γ-bungarotoxins. Although B. multicinctus antivenin showed immunoreaction with high molecular weight fractions of Bungarus fasciatus, Naja atra, Ophiophagus hannah venoms but the antivenin only demonstrated animal protection efficacy against O. hannah venom. These results indicated that the high molecular weight fractions of the O. hannah played an important role in venom lethality but those of B. fasciatus and N. atra did not have such a role.

A superlinear iteration method for calculation of finite length journal bearing's static equilibrium position.

Solving the static equilibrium position is one of the most important parts of dynamic coefficients calculation and further coupled calculation of rotor system. The main contribution of this study is testing the superlinear iteration convergence method-twofold secant method, for the determination of the static equilibrium position of journal bearing with finite length. Essentially, the Reynolds equation for stable motion is solved by the finite difference method and the inner pressure is obtained by the successive over-relaxation iterative method reinforced by the compound Simpson quadrature formula. The accuracy and efficiency of the twofold secant method are higher in comparison with the secant method and dichotomy. The total number of iterative steps required for the twofold secant method are about one-third of the secant method and less than one-eighth of dichotomy for the same equilibrium position. The calculations for equilibrium position and pressure distribution for different bearing length, clearance and rotating speed were done. In the results, the eccentricity presents linear inverse proportional relationship to the attitude angle. The influence of the bearing length, clearance and bearing radius on the load-carrying capacity was also investigated. The results illustrate that larger bearing length, larger radius and smaller clearance are good for the load-carrying capacity of journal bearing. The application of the twofold secant method can greatly reduce the computational time for calculation of the dynamic coefficients and dynamic characteristics of rotor-bearing system with a journal bearing of finite length.