RESUMEN
We propose a first-principles model of minimum lattice thermal conductivity ([Formula: see text]) based on a unified theoretical treatment of thermal transport in crystals and glasses. We apply this model to thousands of inorganic compounds and find a universal behavior of [Formula: see text] in crystals in the high-temperature limit: The isotropically averaged [Formula: see text] is independent of structural complexity and bounded within a range from â¼0.1 to â¼2.6 W/(m K), in striking contrast to the conventional phonon gas model which predicts no lower bound. We unveil the underlying physics by showing that for a given parent compound, [Formula: see text] is bounded from below by a value that is approximately insensitive to disorder, but the relative importance of different heat transport channels (phonon gas versus diffuson) depends strongly on the degree of disorder. Moreover, we propose that the diffuson-dominated [Formula: see text] in complex and disordered compounds might be effectively approximated by the phonon gas model for an ordered compound by averaging out disorder and applying phonon unfolding. With these insights, we further bridge the knowledge gap between our model and the well-known Cahill-Watson-Pohl (CWP) model, rationalizing the successes and limitations of the CWP model in the absence of heat transfer mediated by diffusons. Finally, we construct graph network and random forest machine learning models to extend our predictions to all compounds within the Inorganic Crystal Structure Database (ICSD), which were validated against thermoelectric materials possessing experimentally measured ultralow κL. Our work offers a unified understanding of [Formula: see text], which can guide the rational engineering of materials to achieve [Formula: see text].
RESUMEN
Rhenium chalcohalide cluster compounds are a photoluminescent family of mixed-anion chalcohalide cluster materials. Here we report the new material Rb6Re6S8I8, which crystallizes in the cubic space group Fm[Formula: see text]m and contains isolated [Re6S8I6]4- clusters. Rb6Re6S8I8 has a band gap of 2.06(5) eV and an ionization energy of 5.51(3) eV, and exhibits broad photoluminescence (PL) ranging from 1.01 eV to 2.12 eV. The room-temperature PL exhibits a PL quantum yield of 42.7% and a PL lifetime of 77 µs (99 µs at 77 K). Rb6Re6S8I8 is found to be soluble in multiple polar solvents including N,N-dimethylformamide, which enables solution processing of the material into films with thickness under 150 nm. Light-emitting diodes based on films of Rb6Re6S8I8 were fabricated, demonstrating the potential for this family of materials in optoelectronic devices.
RESUMEN
We propose an effective strategy to significantly enhance the thermoelectric power factor (PF) of a series of 2D semimetals and semiconductors by driving them toward a topological phase transition (TPT). Employing first-principles calculations with an explicit consideration of electron-phonon interactions, we analyze the electronic transport properties of germanene across the TPT by applying hydrogenation and biaxial strain. We reveal that the nontrivial semimetal phase, hydrogenated germanene with 8% biaxial strain, achieves a considerable 4-fold PF enhancement, attributed to the highly asymmetric electronic structure and semimetallic nature of the nontrivial phase. We extend the strategy to another two representative 2D materials (stanene and HgSe) and observe a similar trend, with a marked 7-fold and 5-fold increase in PF, respectively. The wide selection of functional groups, universal applicability of biaxial strain, and broad spectrum of 2D semimetals and semiconductors render our approach highly promising for designing novel 2D materials with superior thermoelectric performance.
RESUMEN
In the context of metal particle catalysts, composition, shape, exposed facets, crystal structure, and atom distribution dictate activity. While techniques have been developed to control each of these parameters, there is no general method that allows one to optimize all parameters in the context of polyelemental systems. Herein, by combining a solid-state, Bi-influenced, high-index facet shape regulation strategy with thermal annealing, we achieve control over crystal structure and atom distribution on the exposed high-index facets, resulting in an unprecedentedly diverse library of chemically disordered and ordered multimetallic (Pt, Co, Ni, Cu, Fe, and Mn) tetrahexahedral (THH) nanoparticles. Density functional theory calculations show that surface Bi modification stabilizes the {210} high-index facets of the nanoparticles, regardless of their internal atomic ordering. Moreover, we find that the ordering transition temperatures for the nanoparticles are dependent on their composition, and, in the case of Pt3Fe1 THH nanoparticles, increasing Ni substitution leads to an order-to-disorder transition at 900 °C. Finally, we have discovered that ordered intermetallic THH Pt1Co1 nanocatalysts exhibit a catalytic performance superior to disordered THH Pt1Co1 nanoparticles and commercial Pt/C catalysts toward methanol electrooxidation, highlighting the importance of crystal structure and atom distribution control on high-index facets in nanoscale catalysts.
RESUMEN
We use scanning probe block copolymer lithography in a two-step sequential manner to explore the deposition of secondary metals on nanoparticle seeds. When single element nanoparticles (Au, Ag, Cu, Co, or Ni) were used as seeds, both heterogeneous and homogeneous growth occurred, as rationalized using the thermodynamic concepts of bond strength and lattice mismatch. Specifically, heterogeneous growth occurs when the heterobond strength between the seed and growth atoms is stronger than the homobond strength between the growth atoms. Moreover, the resulting nanoparticle structure depends on the degree of lattice mismatch between the seed and growth metals. Specifically, a large lattice mismatch (e.g., 13.82% for Au and Ni) typically resulted in heterodimers, whereas a small lattice mismatch (e.g., 0.19% for Au and Ag) resulted in core-shell structures. Interestingly, when heterodimer nanoparticles were used as seeds, the secondary metals deposited asymmetrically on one side of the seed. By programming the deposition conditions of Ag and Cu on AuNi heterodimer seeds, two distinct nanostructures were synthesized with (1) Ag and Cu on the Au domain and (2) Ag on the Au domain and Cu on the Ni domain, illustrating how this technique can be used to predictively synthesize structurally complex, multimetallic nanostructures.
Asunto(s)
Oro , Nanopartículas del Metal , Oro/química , Nanopartículas del Metal/química , Polímeros/química , Plata/químicaRESUMEN
The behavior of 5f electrons in soft ligand environments makes actinides, and especially transuranium chalcogenides, an intriguing class of materials for fundamental studies. Due to the affinity of actinides for oxygen, however, it is a challenge to synthesize actinide chalcogenides using non-metallic reagents. Using the boron chalcogen mixture method, we achieved the synthesis of the transuranium sulfide NaCuNpS3 starting from the oxide reagent, NpO2. Via the same synthetic route, the isostructural composition of NaCuUS3 was synthesized and the material contrasted with NaCuNpS3. Single crystals of the U-analogue, NaCuUS3, were found to undergo an unexpected reversible hydration process to form NaCuUS3·xH2O (x ≈ 1.5). A large combination of techniques was used to fully characterize the structure, hydration process, and electronic structures, specifically a combination of single crystal, powder, high temperature powder X-ray diffraction, extended X-ray absorption fine structure, infrared, and inductively coupled plasma spectroscopies, thermogravimetric analysis, and density functional theory calculations. The outcome of these analyses enabled us to determine the composition of NaCuUS3·xH2O and obtain a structural model that demonstrated the retention of the local structure within the [CuUS3]- layers throughout the hydration-dehydration process. Band structure, density of states, and Bader charge calculations for NaCuUS3, NaCuUS3·xH2O, and NaCuNpS3 along with X-ray absorption near edge structure, UV-vis-NIR, and work function measurements on ACuUS3 (A = Na, K, and Rb) and NaCuUS3·xH2O samples were carried out to demonstrate that electronic properties arise from the [CuTS3]- layers and show surprisingly little dependence on the interlayer distance.
RESUMEN
The isostructural heteroanionic compounds ß-LiAsS2-xSex (x = 0, 0.25, 1, 1.75, 2) show a positive correlation between selenium content and second-harmonic response and greatly outperform the industry standard AgGaSe2. These materials crystallize in the noncentrosymmetric space group Cc as one-dimensional 1/∞ [AsQ2]- (Q = S, Se, S/Se) chains consisting of corner-sharing AsQ3 trigonal pyramids with charge-balancing Li+ atoms interspersed between the chains. LiAsS2-xSex melts congruently for 0 ≤ x ≤ 1.75, but when the Se content exceeds x = 1.75, crystallization is complicated by a phase transition. This behavior is attributed to the ß- to α-phase transition present in LiAsSe2, which is observed in the Se-rich compositions. The band gap decreases with increasing Se content, starting at 1.63 eV (LiAsS2) and reaching 1.06 eV (ß-LiAsSe2). Second-harmonic generation measurements as a function of wavelength on powder samples of ß-LiAsS2-xSex show that these materials exhibit significantly higher nonlinearity than AgGaSe2 (d36 = 33 pm/V), reaching a maximum of 61.2 pm/V for LiAsS2. In comparison, single-crystal measurements for LiAsSSe yielded a deff = 410 pm/V. LiAsSSe, LiAsS0.25Se1.75, and ß-LiAsSe2 show phase-matching behavior for incident wavelengths exceeding 3 µm. The laser-induced damage thresholds from two-photon absorption processes are on the same order of magnitude as AgGaSe2, with S-rich materials slightly outperforming AgGaSe2 and Se-rich materials slightly underperforming AgGaSe2.
RESUMEN
Although BiAgOSe, an analogue of a well-studied thermoelectric material BiCuOSe, is thermodynamically stable, its synthesis is complicated by the low driving force of formation from the stable binary and ternary intermediates. Here we have developed a "subtraction strategy" to suppress byproducts and produce pure phase BiAgOSe using hydrothermal methods. Electronic structure calculations and optical characterization show that BiAgOSe is an indirect bandgap semiconductor with a bandgap of 0.95 eV. The prepared sample exhibits lower lattice thermal conductivities (0.61 W·m-1·K-1 at room temperature and 0.35 W·m-1·K-1 at 650 K) than BiCuOSe. Lattice dynamical simulations and variable temperature diffraction measurements demonstrate that the low lattice thermal conductivity arises from both the low sound velocity and high phonon-phonon scattering rates in BiAgOSe. These in turn result primarily from the soft Ag-Se bonds in the edge-sharing AgSe4 tetrahedra and large sublattice mismatch between the quasi-two-dimensional [Bi2O2]2+ and [Ag2Se2]2- layers. These results highlight the advantages of manipulating the chemistry of homoleptic polyhedra in heteroanionic compounds for electronic structure and phonon transport control.
RESUMEN
The accuracy and efficiency of electronic-structure methods to understand, predict and design the properties of materials has driven a new paradigm in research. Simulations can greatly accelerate the identification, characterization and optimization of materials, with this acceleration driven by continuous progress in theory, algorithms and hardware, and by adaptation of concepts and tools from computer science. Nevertheless, the capability to identify and characterize materials relies on the predictive accuracy of the underlying physical descriptions, and on the ability to capture the complexity of realistic systems. We provide here an overview of electronic-structure methods, of their application to the prediction of materials properties, and of the different strategies employed towards the broader goals of materials design and discovery.
RESUMEN
WS2 nanoflakes have great potential as electrode materials of lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) because of their unique 2D structure, which facilitates the reversible intercalation and extraction of alkali metal ions. However, a fundamental understanding of the electrochemical lithiation/sodiation dynamics of WS2 nanoflakes especially at the nanoscale level, remains elusive. Here, by combining battery electrochemical measurements, density functional theory calculations, and in situ transmission electron microscopy, the electrochemical-reaction kinetics and mechanism for both lithiation and sodiation of WS2 nanoflakes are investigated at the atomic scale. It is found that compared to LIBs, SIBs exhibit a higher reversible sodium (Na) storage capacity and superior cyclability. For sodiation, the volume change due to ion intercalation is smaller than that in lithiation. Also, sodiated WS2 maintains its layered structure after the intercalation process, and the reduced metal nanoparticles after conversion in sodiation are well-dispersed and aligned forming a pattern similar to the layered structure. Overall, this work shows a direct interconnection between the reaction dynamics of lithiated/sodiated WS2 nanoflakes and their electrochemical performance, which sheds light on the rational optimization and development of advanced WS2 -based electrodes.
RESUMEN
Scanning probe block copolymer lithography (SPBCL), in combination with density-functional theory (DFT), has been used to design and synthesize hydrogen evolution catalysts. DFT was used to calculate the hydrogen adsorption energy on a series of single-element, bimetallic, and trimetallic (Au, Pt, Ni, and Cu) substrates to provide leads that could be synthesized in the form of alloy or phase-separated particles via SPBCL. PtAuCu (18 nm, â¼1:1:1 stoichiometry) has been identified as a homogeneous alloy phase that behaves as an effective hydrogen evolution catalyst in acidic aqueous media, even when it is made in bulk form via solution phase methods. Significantly, the bulk-prepared PtAuCu/C nanocatalyst discovered via this process exhibits an activity seven times higher than that of the state-of-the-art commercial Pt/C catalyst (based upon Pt content). The advantage of using SPBCL in the discovery process is that one can uniformly make particles, each consisting of a uniform phase combination (e.g., all alloy or all phase-segregated species) at a fixed elemental ratio, an important consideration when working with polyelemental species where multiple phases may exist.
RESUMEN
Semiconductor nanowires (NWs) capped with metal nanoparticles (NPs) show multifunctional and synergistic properties, which are important for applications in the fields of catalysis, photonics, and electronics. Conventional colloidal syntheses of this class of hybrid structures require complex sequential seeded growth, where each section requires its own set of growth conditions, and methods for preparing such wires are not universal. Here, we report a new and general method for synthesizing metal-semiconductor nanohybrids based on particle catalysts, prepared by scanning probe block copolymer lithography, and chemical vapor deposition. In this process, metallic heterodimer NPs were used as catalysts for NW growth to form semiconductor NWs capped with metallic particles (Au, Ag, Co, Ni). Interestingly, the growth processes for NWs on NPs are regioselective and controlled by the chemical composition of the metallic heterodimer used. Using a systematic experimental approach, paired with density functional theory calculations, we were able to postulate three different growth modes, one without precedent.
RESUMEN
Eighteen new quaternary chalcogenides AGaM'Q4 (A+ = K+, Rb+, Cs+, Tl+; M'4+ = Ge4+, Sn4+; Q2- = S2-, Se2-) have been prepared by solid-state syntheses and structurally characterized using single-crystal X-ray diffraction techniques. These new phases crystallize in a variety of layered structure types. The tin analogues also adopt an extended three-dimensional network structure as polymorphs. The polymorphism and phase-stability in these cases were studied by thermal analysis and high-temperature in situ X-ray powder diffraction. All compounds are semiconductors with the colored selenides absorbing light in the infrared-green region (1.8 eV < Eg < 2.3 eV) and the mostly white sulfides absorbing light in the blue-ultraviolet range (2.5 eV < Eg < 3.6 eV). Based on third-harmonic generation (THG) measurements, the third-order nonlinear optical (NLO) susceptibilities χ(3) of the new and previously reported AGaM'Q4 compounds were determined. These measurements revealed an apparent correlation between the THG response of the sample and its band gap, rather than the crystal structure type. While low-gap materials possess higher nonlinearity in general, we found that layered orthorhombic RbGaGeS4 exhibits an impressive χ(3) value (about four times larger than that of AgGaS2) even with a large band gap and shows stability under ambient conditions with no significant irradiation damage.
RESUMEN
We investigate the structural and physical properties of the AgSnmSbSem+2 system with m = 1-20 (i.e., SnSe matrix and â¼5-50% AgSbSe2) from atomic, nano, and macro length scales. We find the 50:50 composition, with m = 1 (i.e., AgSnSbSe3), forms a stable cation-disordered cubic rock-salt p-type semiconductor with a special multi-peak electronic valence band structure. AgSnSbSe3 has an intrinsically low lattice thermal conductivity of â¼0.47 W m-1 K-1 at 673 K owing to the synergy of cation disorder, phonon anharmonicity, low phonon velocity, and low-frequency optical modes. Furthermore, Te alloying on Se sites creates a quinary high-entropy NaCl-type solid solution AgSnSbSe3-xTex with randomly disordered cations and anions. The extra point defects and lattice dislocations lead to glass-like lattice thermal conductivities of â¼0.32 W m-1 K-1 at 723 K and higher hole carrier concentration than AgSnSbSe3. Concurrently, the Te alloying promotes greater convergence of the multiple valence band maxima in AgSnSbSe1.5Te1.5, the composition with the highest configurational entropy. Facilitated by these favorable modifications, we achieve a high average power factor of â¼9.54 µW cm-1 K-2 (400-773 K), a peak thermoelectric figure of merit ZT of 1.14 at 723 K, and a high average ZT of â¼1.0 over a wide temperature range of 400-773 K in AgSnSbSe1.5Te1.5.
RESUMEN
Defect chemistry is critical to designing high performance thermoelectric materials. In SnTe, the naturally large density of cation vacancies results in excessive hole doping and frustrates the ability to control the thermoelectric properties. Yet, recent work also associates the vacancies with suppressed sound velocities and low lattice thermal conductivity, underscoring the need to understand the interplay between alloying, vacancies, and the transport properties of SnTe. Here, we report solid solutions of SnTe with NaSbTe2 and NaBiTe2 (NaSnmSbTem+2 and NaSnmBiTem+2, respectively) and focus on the impact of the ternary alloys on the cation vacancies and thermoelectric properties. We find introduction of NaSbTe2, but not NaBiTe2, into SnTe nearly doubles the natural concentration of Sn vacancies. Furthermore, DFT calculations suggest that both NaSbTe2 and NaBiTe2 facilitate valence band convergence and simultaneously narrow the band gap. These effects improve the power factors but also make the alloys more prone to detrimental bipolar diffusion. Indeed, the performance of NaSnmBiTem+2 is limited by strong bipolar transport and only exhibits modest maximum ZTs ≈ 0.85 at 900 K. In NaSnmSbTem+2 however, the doubled vacancy concentration raises the charge carrier density and suppresses bipolar diffusion, resulting in superior power factors than those of the Bi-containing analogues. Lastly, NaSbTe2 incorporation lowers the sound velocity of SnTe to give glasslike lattice thermal conductivities. Facilitated by the favorable impacts of band convergence, vacancy-augmented hole concentration, and lattice softening, NaSnmSbTem+2 reaches high ZT ≈ 1.2 at 800-900 K and a competitive average ZTavg of 0.7 over 300-873 K. The difference in ZT between two chemically similar compounds underscores the importance of intrinsic defects in engineering high-performance thermoelectrics.
RESUMEN
Bulk and two-dimensional black phosphorus are considered to be promising battery materials due to their high theoretical capacities of 2,600 mAh g-1. However, their rate and cycling capabilities are limited by the intrinsic (de-)alloying mechanism. Here, we demonstrate a unique surface redox molecular-level mechanism of P sites on oxidized black phosphorus nanosheets that are strongly coupled with graphene via strong interlayer bonding. These redox-active sites of the oxidized black phosphorus are confined at the amorphorized heterointerface, revealing truly reversible pseudocapacitance (99% of total stored charge at 2,000 mV s-1). Moreover, oxidized black-phosphorus-based electrodes exhibit a capacitance of 478 F g-1 (four times greater than black phosphorus) with a rate capability of ~72% (compared to 21.2% for black phosphorus) and retention of ~91% over 50,000 cycles. In situ spectroelectrochemical and theoretical analyses reveal a reversible change in the surface electronic structure and chemical environment of the surface-exposed P redox sites.
RESUMEN
Materials based on cubic tetrahedrites (Cu_{12}Sb_{4}S_{13}) are useful thermoelectrics with unusual thermal and electrical transport properties, such as very low and nearly temperature-independent lattice thermal conductivity (κ_{L}). We explain the microscopic origin of the glasslike κ_{L} in Cu_{12}Sb_{4}S_{13} by explicitly treating anharmonicity up to quartic terms for both phonon energies and phonon scattering rates. We show that the strongly unstable phonon modes associated with trigonally coordinated Cu atoms are anharmonically stabilized above approximately 100 K and continue hardening with increasing temperature in accord with experimental data. This temperature-induced hardening effect reduces scattering of heat carrying acoustic modes by reducing the available phase space for three-phonon processes, thereby balancing the conventional âT increase in scattering due to phonon population and yielding nearly temperature-independent κ_{L}. Furthermore, we find that very strong phonon broadening leads to a qualitative breakdown of the conventional phonon-gas model and modify the dominant heat transport mechanism from the particlelike phonon wave packet propagation to incoherent contributions described by the off-diagonal terms in the heat-flux operator, which are typically prevailing in glasses and disordered crystals. Our work paves the way to a deeper understanding of glasslike thermal conductivity in complex crystals with strong anharmonicity.
RESUMEN
We investigate the microscopic mechanisms of ultralow lattice thermal conductivity (κ_{l}) in Tl_{3}VSe_{4} by combining a first principles density functional theory based framework of anharmonic lattice dynamics with the Peierls-Boltzmann transport equation for phonons. We include contributions of the three- and four-phonon scattering processes to the phonon lifetimes as well as the temperature dependent anharmonic renormalization of phonon energies arising from an unusually strong quartic anharmonicity in Tl_{3}VSe_{4}. In contrast to a recent report by Mukhopadhyay et al. [Science 360, 1455 (2018)SCIEAS0036-807510.1126/science.aar8072] which suggested that a significant contribution to κ_{l} arises from random walks among uncorrelated oscillators, we show that particlelike propagation of phonon excitations can successfully explain the experimentally observed ultralow κ_{l}. Our findings are further supported by explicit calculations of the off-diagonal terms of the heat current operator, which are found to be small and indicate that wavelike tunneling of heat carrying vibrations is of minor importance. Our results (i) resolve the discrepancy between the theoretical and experimental κ_{l}, (ii) offer new insights into the minimum κ_{l} achievable in Tl_{3}VSe_{4}, and (iii) highlight the importance of high order anharmonicity in low-κ_{l} systems. The methodology demonstrated here may be used to resolve the discrepancies between the experimentally measured and the theoretically calculated κ_{l} in skutterides and perovskites, as well as to understand the glasslike κ_{l} in complex crystals with strong anharmonicity, leading towards the goal of rational design of new materials.
RESUMEN
We report that Ga-doped and Ga-In-codoped n-type PbS samples show excellent thermoelectric performance in the intermediate temperature range. First-principles electronic structure calculations reveal that Ga doping can cause Fermi level pinning in PbS by introducing a gap state between the conduction and valence bands. Furthermore, Ga-In codoping introduces an extra conduction band. These added electronic features lead to high electron mobilities up to µH â¼ 630 cm2 V-1 s-1 for n of 1.67 × 1019 cm-3 and significantly enhanced Seebeck coefficients in PbS. Consequently, we obtained a maximum power factor of â¼32 µW cm-1 K-2 at 300 K for Pb0.9875Ga0.0125S, which is the highest reported for PbS-based systems giving a room-temperature figure of merit, ZT, of â¼0.35 and â¼0.82 at 923 K. For the codoped Pb0.9865Ga0.0125In0.001S, the maximum ZT rises to â¼1.0 at 923 K and achieves a record-high average ZT (ZTavg) of â¼0.74 in the temperature range of 400-923 K.
RESUMEN
Dirac and Weyl semimetals host exotic quasiparticles with unconventional transport properties, such as high magnetoresistance and carrier mobility. Recent years have witnessed a huge number of newly predicted topological semimetals from existing databases; however, experimental verification often lags behind such predictions. Common reasons are synthetic difficulties or the stability of predicted phases. Here, we report the synthesis of the type-II Dirac semimetal Ir2In8S, an air-stable compound with a new structure type. This material has two Dirac crossings in its electronic structure along the Γ-Z direction of the Brillouin zone. We further show that Ir2In8S has a high electron carrier mobility of â¼10â¯000 cm2/(V s) at 1.8 K and a large, nonsaturating transverse magnetoresistance of â¼6000% at 3.34 K in a 14 T applied field. Shubnikov de-Haas oscillations reveal several small Fermi pockets and the possibility of a nontrivial Berry phase. With its facile crystal growth, novel structure type, and striking electronic structure, Ir2In8S introduces a new material system to study topological semimetals and enable advances in the field of topological materials.