RESUMEN
PURPOSE: Le Fort I maxillary impaction is an orthognathic surgical procedure to reposition the maxillary complex superiorly. The objective of this study is to investigate if maxillary impaction negatively affects the nasal airway. METHODS: A systematic review with meta-analysis was performed to investigate the effects of maxillary impaction on the nasal cavity. PubMed, Embase, and Cochrane Library databases were accessed. Observational studies, nonrandomized, and randomized controlled trials were included if Le Fort 1 maxillary impaction and nasal airway outcomes assessments were performed. Studies were excluded if maxillary impaction or nasal airway outcome assessment was not performed or if the study included patients with cleft or craniofacial syndromes, previous nasal surgeries, or active respiratory tract. The demographic data, study methodology, magnitude of maxillary impaction, and outcomes related to the nasal airway were collected. These outcomes includes anatomical changes (evaluated by rhinoscopy, acoustic rhinometry, and computed tomography), changes to nasal airflow and resistance (evaluated by rhinomanometry) and changes to quality of life. RESULTS: The search yielded 7517 studies. Ten studies were included after the application of the selection criteria. A total of 126 patients underwent pure maxillary impaction, 97 underwent maxillary impaction and advancement, and 12 had impaction with setback. Despite that maxillary impactions decreased the nasal cavity volume by +21.7%, the cross-sectional area of the narrowest parts of the cavity was only reduced by -8.4%. Maxillary impactions generally increases the nasal airflow (+12.6%) while reducing nasal resistance (-20.2%). Rhinoscopies also showed a reduction in nasal obstruction. CONCLUSION: Maxillary impaction did not negatively affect the nasal airway. The surgeries did not lead to the reduction of the cross-sectional area at the strictures of the nasal cavities. The nasal airflow and resistance was not decreased and increased, respectively. The quality of life of the patients was also not shown to have worsened.
RESUMEN
The management of missing teeth as a result of dental trauma or associated with hypodontia in children and adolescents presents as a clinical challenge for the dental team. One of the options that is regaining popularity is dental autotransplantation. To improve autotransplantation outcomes, careful interdisciplinary planning, surgical simulation using cone beam computed tomography images and three-dimensional-printed teeth replicas should be undertaken for presurgical preparation. This case report showcases two applications of autotransplantation, with emphasis on interdisciplinary management, presurgical preparation and postsurgical orthodontic and aesthetic management to deliver a good long-term, sustainable, biological outcome, as a part of a comprehensive rehabilitation treatment plan in children.
Asunto(s)
Anodoncia , Pérdida de Diente , Diente , Humanos , Niño , Adolescente , Trasplante Autólogo/métodos , Tomografía Computarizada de Haz Cónico/métodos , Impresión TridimensionalRESUMEN
OBJECTIVES: To investigate the predictive value of carotid artery calcifications (CACs) seen on dental imaging for future adverse events related to cerebrovascular and cardiovascular diseases. METHODS: Electronic databases (PubMed, Embase, SCOPUS and Cochrane) and selected grey literature were searched. Outcomes included stroke, transient ischaemic attack (TIA), myocardial infarction (MI), angina, heart failure, future interventional revascularization procedures and death. Risk of bias was assessed using the Newcastle-Ottawa Scale. RESULTS: 5 studies were selected from 1011 records. All were of moderate to low risk of bias. Results were heterogeneous but showed that patients with CACs on panoramic radiographs (PANs) were more likely to experience strokes, TIA, MI and future revascularization procedures compared to control groups. The differences between groups were not all found to be statistically significant. Bilateral vessel-outlining CACs were an independent risk marker for future vascular events. Patients who are not currently being managed for cardiovascular risk factors should be referred for further evaluation. Those already being treated for atherosclerosis may not benefit from additional investigations. CONCLUSION: The evidence for the predictive value of CACs on PANs for adverse future vascular events is equivocal but can help to identify at-risk patients who require further evaluation. CLINICAL RELEVANCE: Dentists must be able to recognize CACs on PANs and make appropriate referrals for patients to be evaluated for cardiovascular risk factors, especially those who have not previously been assessed.
Asunto(s)
Enfermedades de las Arterias Carótidas , Ataque Isquémico Transitorio , Infarto del Miocardio , Accidente Cerebrovascular , Arterias Carótidas/diagnóstico por imagen , Enfermedades de las Arterias Carótidas/diagnóstico por imagen , Humanos , Ataque Isquémico Transitorio/diagnóstico por imagen , Accidente Cerebrovascular/diagnóstico por imagenRESUMEN
BACKGROUND: Titanium has been used in osteosynthesis for decades and its compatibility and safety is unquestioned. Studies have shown that there is release and collection of titanium in the organ systems with little note of toxicity. The gold standard is considered to be titanium osteosynthesis plate produced by milling methods. The use of customized titanium plates produced with 3D printing, specifically direct metal laser sintering, have found increasing use in recent years. It is unknown how much titanium is released in these printed titanium implants, which is known to be potentially porous, depending on the heat settings of the printer. We hypothesize that the amount of titanium released in printed titanium implants may be potentially more or equal compared to the gold standard, which is the implant produced by milling. METHODS: We studied the biosafety of this technology and its products by measuring serum and organ titanium levels after implantation of 3D-printed versus traditionally fabrication titanium plates and screws in a pilot study using the rabbit model. A total of nine rabbits were used, with three each in the control, milled and printed titanium group. The animals were euthanized after six months. Serum and organs of the reticuloendothelial system were harvested, digested and assayed for titanium levels. RESULTS: Organ and serum titanium levels were significantly higher in rabbit subjects implanted with titanium implants (milled and printed) compared to the control group. However, there was no significant difference in organ and serum titanium levels of subjects implanted with milled and traditionally fabricated titanium implants. CONCLUSIONS: The biosafety of use of 3D-printed titanium implants and traditionally fabricated titanium implants are comparable. With this in mind, 3D-printed custom implants can not only replace, but will very possibly surpass traditionally fabricated titanium implants in the mode and extent of use.
Asunto(s)
Materiales Biocompatibles , Placas Óseas , Impresión Tridimensional , Titanio , Animales , Materiales Biocompatibles/efectos adversos , Materiales Biocompatibles/análisis , Placas Óseas/efectos adversos , Rayos Láser , Masculino , Proyectos Piloto , Conejos , Titanio/efectos adversos , Titanio/análisis , Titanio/sangreRESUMEN
BACKGROUND: Tumoral calcinosis is an uncommon clinicopathological condition which is characterized by the formation of calcium salt deposition in intra-articular or peri-articular soft tissues. It usually presents as a focal growth of hard tissue, either solitary or multiple, beneath the skin and connective tissue. Diagnostic techniques mainly include clinical and radiographic evaluation. The most commonly involved locations include the hip, elbow, shoulder and knee. Involvement of the head and neck regions are far less common. There have been 5 case reports of temporomandibular joint involvement in the literature so far. CASE PRESENTATION: We present a case report which describes the diagnosis and management of a 59 year old female patient with chronic right temporomandibular joint pain and localized bony hard swelling over the right pre-auricular region. Patient retained normal range of motion and mouth opening. Computed tomography taken showed a radio-opaque juxta-articular ovoid mass over the right pre-auricular region in close proximity but not fused to the mandibular condyle. Surgical excision was performed for this swelling via a pre-auricular approach under general anaesthesia. Histological examination performed confirmed the diagnosis of tumoral calcinosis. Pain at the right temporomandibular joint was resolved after the surgery. Serum calcium and phosphate levels were normal in this patient. CONCLUSION: Surgical excision is the primary treatment modality for tumoral calcinosis. Tumoral calcinosis may be associated with elevated serum calcium and phosphate levels. In patients with elevated serum electrolytes, it is important to consider the overall systemic health in management of this condition. Management of serum electrolytes levels plays a role in reducing recurrence rates. This case report and review aims to discuss the diagnosis, treatment and overall systemic management of this rare condition.
Asunto(s)
Calcinosis , Articulación Temporomandibular , Edema , Femenino , Humanos , Persona de Mediana Edad , Tomografía Computarizada por Rayos XRESUMEN
OBJECTIVES: This study investigated the effectiveness of simulation training in improving the confidence and competency of oral and maxillofacial surgery (OMS) residents in performing orthognathic surgery (OGS). METHODS: Kern's six-step approach was applied when designing the simulation training for OMS residents. The difficulties encountered by the residents when learning OGS were considered when designing the training program. A training course consisting of didactic sessions, hands-on training on three-dimensional training models, and an assessment tool was implemented for OMS residents. Improvement in the confidence and competence of OMS residents in performing OGS, fidelity of the three-dimensional models, and satisfaction with the course was evaluated. RESULTS: All OMS residents (10/10) completed the course. The perceived difficulty in learning OGS was mainly related to the manipulation of the jawbones. While there were improvements in the median confidence and competence scores (3/5 to 4/5), only the differences in competence were found to be statistically significant (p < 0.01, Wilcoxon signed-rank test). Improvements in confidence and competence did not correlate. The mean fidelity scores of both the maxillary and mandibular models were adequate at 3.2 out of 5. Overall, satisfaction with the course was high (5/5). CONCLUSIONS: The six-step approach provides a guided process for educators to formulate a training course directed toward the perceived needs of students. Targeted training can significantly enhance the students' competence. Greater efforts should also be put in place to allow simultaneous developments in the students' confidence along with their competence.
Asunto(s)
Competencia Clínica , Internado y Residencia , Entrenamiento Simulado , Humanos , Entrenamiento Simulado/métodos , Cirugía Ortognática/educación , Procedimientos Quirúrgicos Ortognáticos/educación , CurriculumRESUMEN
A rapidly aging population means many people have multiple health issues leading to an increased risk of acute medical emergencies. The objective of this study was to evaluate how essential experiential learning is in developing dental graduates' ability to manage medically compromised patients. Three hundred and twenty-seven students and graduates were invited to participate in an online survey to rate their confidence in managing medically compromised patients and acute medical emergencies using a 5-point Likert scale. Competence of knowledge was evaluated using 30 multiple choice questions (MCQs) across six domains. The respondents were also asked whether a theory-only training adequately prepared them to manage medically compromised patients, or whether it must be supplemented with clinical training. Two-hundred and sixty-four responses were collected from 75 undergraduates (UG), 96 junior dental officers (JDO) and 93 senior dental officers (SDO). The UG reported that they infrequently managed medically compromised patients, whereas both the JDO and SDO reported having frequent encounters with these patients. The mean confidence scale in the management of medically compromised patients were 2.62, 3.50 and 3.69 (out of 5), respectively. In contrast, their confidence scale in the management of acute medical emergencies was 2.05, 2.33 and 2.50 (out of 5), respectively. The MCQ scores were 25.51, 26.44 and 26.86 out of 30, respectively. The outcomes of the JDO and SDO were significantly better than the UG (t-tests, p<0.05). All three groups responded that a theory-only training in dental school did not adequately prepare them to manage medically compromised patients. Both the JDO and SDO felt that their clinical work experience better prepared them to manage these patients. Experiential learning from "real-life" clinical experience is an essential component in developing graduates' confidence and competence in the management of medically compromised patients. A dental curriculum with theory-only training in this aspect is inadequate.
Asunto(s)
Urgencias Médicas , Estudiantes de Odontología , Humanos , Anciano , Estudios Transversales , Competencia Clínica , Curriculum , Encuestas y CuestionariosRESUMEN
PURPOSE: The objective of this study was to investigate the accuracies of three-dimensional (3D) facial scanning mobile phone applications as compared to professional 3D facial imaging systems. MATERIALS AND METHODS: A manikin head model was used as the subject for comparing six 3D facial imaging systems which comprised three professional 3D scanners (3dMDface, Artec Eva and Vectra H2) and three mobile phone applications (Bellus3D, ScandyPro and Hedges). For each system, five scans were taken to analyse (1) linear accuracy using 9 measurements (2) global and (3) regional 3D accuracy of the scanned surface by root mean square (RMS) and colour map analysis. Another set of five scans was repeated by a second operator to evaluate the inter-operator reproducibility for each system. RESULTS: All the facial imaging systems had absolute errors lesser than 1.0 mm for the linear measurements. The technical error of measurement (TEM) for inter-examiner and intra-examiner linear measurements were within acceptable limits. Artec Eva, Vectra H2 and Scandy Pro had poor global 3D trueness (RMS > 1.0 mm) but good 3D regional trueness (RMS < 1.0 mm). 3dMDface, Bellus3D Face App and Heges had good global and regional 3D trueness. All the facial imaging systems had good global and regional 3D precision and reproducibility (RMS < 1.0 mm). CONCLUSION: This study demonstrated that mobile phone 3D scanning applications had comparable trueness, precision and reproducibility to professional systems. Colour map analysis supplemented the use of the RMS value to demonstrate facial regions of significant deviation. Clinicians should also consider the specific area or region of inaccuracies for each system to determine whether the chosen system is appropriate for the clinical condition or procedure. CLINICAL SIGNIFICANCE: Mobile phone 3D facial imaging applications may be as accurate as 3D professional facial scanning systems for craniomaxillofacial purposes. However, the choice of the system may vary depending on the specific area of interest.
Asunto(s)
Teléfono Celular , Aplicaciones Móviles , Humanos , Proyectos Piloto , Reproducibilidad de los Resultados , Suplementos DietéticosRESUMEN
Objectives: Understanding the lingual nerve's precise location is crucial to prevent iatrogenic injury. This systematic review seeks to determine the lingual nerve's most probable topographical location in the posterior mandible. Materials and Methods: Two electronic databases were searched, identifying studies reporting the lingual nerve's position in the posterior mandible. Anatomical data in the vertical and horizontal dimensions at the retromolar and molar regions were collected for meta-analyses. Results: Of the 2,700 unique records identified, 18 studies were included in this review. In the vertical plane, 8.8% (95% confidence interval [CI], 1.0%-21.7%) and 6.3% (95% CI, 1.9%-12.5%) of the lingual nerves coursed above the alveolar crest at the retromolar and third molar regions. The mean vertical distance between the nerve and the alveolar crest ranged from 12.10 to 4.32 mm at the first to third molar regions. In the horizontal plane, 19.9% (95% CI, 0.0%-62.7%) and 35.2% (95% CI, 13.0%-61.1%) of the lingual nerves were in contact with the lingual plate at the retromolar and third molar regions. Conclusion: This systematic review mapped out the anatomical location of the lingual nerve in the posterior mandible, highlighting regions that warrant additional caution during surgeries to avoid iatrogenic lingual nerve injuries.
RESUMEN
AIMS: It has been reported that there are a certain percentage of COVID-19 patients who recover but suffer from devastating permanent organ damage or failure. Others suffer from long Covid syndrome, with prolonged symptoms that persist more than 12 weeks. However, there is scarcity of literature regarding the provision of dental treatment for these two groups of patients. This manuscript reviews the impact of multi-system involvement on the provision of dental care to these patients. MATERIALS AND METHODS: A search of literature was done in PubMed-Medline and Scopus databases to review the available literature on COVID-19 impacts on pulmonary, cardiovascular, haematologic, renal, gastrointestinal, endocrine, and neurologic systems and respective management in dental clinical settings. RESULTS: The literature search from PubMed-Medline and Scopus databases resulted in 74 salient articles that contributed to the concise review on COVID-19 effects on pulmonary, cardiovascular, haematologic, renal, gastrointestinal, endocrine, and neurologic systems and/or its respective dental management recommendations. CONCLUSIONS: This concise review covers the management of post COVID-19 patients with pulmonary, cardiovascular, haematologic, renal, gastrointestinal, endocrine, or neurologic system complications.
Asunto(s)
COVID-19 , Atención Odontológica , COVID-19/complicaciones , Humanos , SARS-CoV-2 , Sobrevivientes , Síndrome Post Agudo de COVID-19RESUMEN
The Ti-6Al-4V alloy is the most common biomaterial used for bone replacements and reconstructions. Despite its advantages, the Ti-6Al-4V has a high stiffness that can cause stress-shielding. In this work, we demonstrated that the selective laser melting (SLM) technology could be used to fabricate porosity in Ti-6Al-4V extra low interstitial (ELI) to reduce its stiffness while improving cell adhesion and proliferation. With a porosity of 14.04%, the elastic modulus of the porous Ti-6Al-4V ELI was reduced to 80 GPa. The compressive stress and the 3-point-bending flexural tests revealed that the porous Ti-6Al-4V ELI possessed a brittle characteristic. The additional pores within the beams of the lattice structures of porous Ti-6Al-4V ELI increased its surface arithmetic average roughness, Ra = 3.94 µm. The in vitro cytocompatibility test showed that the SLM printing process and the post-processes did not cause any toxicity in the MC3T3-E1 cells. The in vitro cell proliferation test also showed that the porous Ti-6Al-4V ELI increased the proliferation rate of osteogenic induced MC3T3-E1 cells on Day 7. The findings from this study would provide engineers and researchers with both the mechanical information and biological understanding of SLM printed porous Ti-6Al-4V ELI, and SLM printed dense Ti-6Al-4V ELI towards biomedical applications.
Asunto(s)
Rayos Láser , Titanio , Aleaciones , Ensayo de Materiales , Porosidad , TecnologíaRESUMEN
The present study investigates Mg-SiO2 nanocomposites as biodegradable implants for orthopedic and maxillofacial applications. The effect of presence and progressive addition of hollow silica nanoparticles (0.5, 1, and 1.5) vol.% on the microstructural, mechanical, degradation, and biocompatibility response of pure Mg were investigated. Results suggest that the increased addition of hollow silica nanoparticles resulted in a progressive increase in yield strength and ultimate compressive strength with Mg-1.5 vol.% SiO2 exhibiting superior enhancement. The response of Mg-SiO2 nanocomposites under the influence of Hanks' balanced salt solution revealed that the synthesized composites revealed lower corrosion rates, indicating rapid dynamic passivation when compared with pure Mg. Furthermore, cell adhesion and proliferation of osteoblast cells were noticeably higher than pure Mg with the addition of 1 vol.% SiO2 nanoparticle. The biocompatibility and the in vitro biodegradation of the Mg-SiO2 nanocomposites were influenced by the SiO2 content in pure Mg with Mg-0.5 vol.% SiO2 nanocomposite exhibiting the best corrosion resistance and biocompatibility when compared with other nanocomposites. Enhancement in mechanical, corrosion, and biocompatibility characteristics of Mg-SiO2 nanocomposites developed in this study are also compared with properties of other metallic biomaterials used in alloplastic mandibular reconstruction in a computational model.
Asunto(s)
Reconstrucción Mandibular , Nanocompuestos , Magnesio , Ensayo de Materiales , Dióxido de SilicioRESUMEN
INTRODUCTION: Mandibular endoprostheses have been explored extensively as potential methods of alloplastic reconstruction. Studies, however, have demonstrated that for segmental mandibular defects, there are challenges associated with loosening. Another method recently introduced in clinical settings is popular as a design for patient-specific implants for segmental mandibular defect and involves a tray (filled with bone) over the defect with wings on both sides secured with screws. Our aim was to investigate which design better withstands the forces of function since studies have presented favourable results with regard to the wing design. MATERIALS AND METHODS: Two designs, an endoprosthesis with stems and wings were modelled. Finite element analysis was performed, and geometric data obtained from a human-sized mandible. A continuity defect of 20 mm was created digitally at the right mandibular molar region and the modelled segments combined with the endoprosthesis. Boundary conditions were set, and 300-N vertical loads applied in the incisor region. The stress concentrations and displacements were evaluated for the titanium alloy (Group 1-Stem) (Group 2-Wing) and the polycaprolactone (PCL) (Group 3 with stem, Group 4 wing design). RESULTS: For the titanium stem (Group 1), the stress values were in the 557-803 MPa range. The titanium wing (Group 2) design showed markedly reduced stress values in the 20-68 MPa range. The stresses observed for the PCL(Group 3) were in the 66-110 MPa range, and the stress concentration in the PCL wing (Group 4) was observed in the wing and body regions of the scaffolds in the 8-42 MPa range. CONCLUSION: The wing design decreased the areas of stress concentrations significantly compared to an endoprosthesis. PCL alone did not have adequate strength to withstand forces applied even in a design that reduced stress concentrations significantly.