Observing π-Au Interaction between Aromatic Molecules and Single Au Nanodimers with a Subnanometer Gap by SERS.

Interface interaction between aromatic molecules and noble metals plays a prominent role in fundamental science and technological applications. However, probing π-metal interactions under ambient conditions remains challenging, as it requires characterization techniques to have high sensitivity and molecular specificity without any restrictions on the sample. Herein, the interactions between polycyclic aromatic hydrocarbon (PAH) molecules and Au nanodimers with a subnanometer gap are investigated by surface-enhanced Raman spectroscopy (SERS). A cleaner and stronger plasmonic field of subnanometer gap Au nanodimer structures was constructed through solvent extraction. High sensitivity and strong π-Au interaction between PAHs and Au nanodimers are observed. Additionally, the density functional theory calculation confirmed the interactions of PAHs physically absorbed on the Au surface; the binding energy and differential charge further theoretically indicated the correlation between the sensitivity and the number of PAH rings, which is consistent with SERS experimental results. This work provides a new method to understand the interactions between aromatic molecules and noble metal surfaces in an ambient environment, also paving the way for designing the interfaces in the fields of catalysis, sensors, and molecular electronics.

Adsorption Structures, Vibrational Raman Spectra and Chemical Binding Properties of Thioglycolic Acid on Cu(111) Surfaces: A DFT Study.

Copper is widely used in everyday life and industrial production because of its good electrical and thermal conductivity. To overcome copper oxidation and maintain its good physical properties, small organic molecules adsorbed on the surface of copper make a passivated layer to further avoid copper corrosion. In this work, we have investigated thioglycolic acid (TGA, another name is mercaptoacetic acid) adsorbed on copper surfaces by using density functional theory (DFT) calculations and a periodical slab model. We first get five stable adsorption structures, and the binding interaction between TGA and Cu(111) surfaces by using density of states (DOS), indicating that the most stable configuration adopts a triple-end binding model. Then, we analyze the vibrational Raman spectra of TGA adsorbed on the Cu(111) surface and make vibrational assignments according to the vibrational vectors. Finally, we explore the temperature effect of the thermodynamically Gibbs free energy of TGA on the Cu(111) surface and the antioxidant ability of the small organic molecular layer of copper oxidation on the copper surface. Our calculated results further provide evidences to interpret the stability of adsorption structures and antioxidant properties of copper.

Effects of Connectivity Isomerization on Electron Transport Through Thiophene Heterocyclic Molecular Junction.

Connectivity isomerization of the same aromatic molecular core with different substitution positions profoundly affects electron transport pathways and single-molecule conductance. Herein, we designed and synthesized all connectivity isomers of a thiophene (TP) aromatic ring substituted by two dihydrobenzo[b]thiophene (BT) groups with ethynyl spacers (m,n-TP-BT, (m,n = 2,3; 2,4; 2,5; 3,4)), to systematically probe how connectivity contributes to single-molecule conductance. Single-molecule conductance measurements using a scanning tunneling microscopy break junction (STM-BJ) technique show ∼12-fold change in conductance values, which follow an order of 10-4.83 G0 (2,4-TP-BT) < 10-4.78 G0 (3,4-TP-BT) < 10-4.06 G0 (2,3-TP-BT) < 10-3.75 G0 (2,5-TP-BT). Electronic structure analysis and theoretical simulations show that the connectivity isomerization significantly changes electron delocalization and HOMO-LUMO energy gaps. Moreover, the connectivity-dependent molecular structures lead to different quantum interference (QI) effects in electron transport, e.g., a strong destructive QI near E = EF leads the smallest conductance value for 2,4-TP-BT. This work proves a clear relationship between the connectivity isomerization and single-molecule conductance of thiophene heterocyclic molecular junctions for the future design of molecular devices.

dMXP: A De Novo Small-Molecule 3D Structure Predictor with Graph Attention Networks.

Generating the three-dimensional (3D) structure of small molecules is crucial in both structure- and ligand-based drug design. Structure-based drug design needs bioactive conformations of compounds for lead identification and optimization. Ligand-based drug design techniques, such as 3D shape similarity search, 3D pharmacophore model, 3D-QSAR, etc., all require high-quality small-molecule ligand conformations to obtain reliable results. Although predicting a small molecular bioactive conformer requires information from the receptor, a crystal structure of the molecule is a proper approximation to its bioactive conformer in a specific receptor because the binding pose of a small molecule in its receptor's binding pockets should be energetically close to the crystal structures. This study presents a de novo small molecular structure predictor (dMXP) with graph attention networks based on crystal data derived from the Cambridge Structural Database (CSD) combined with molecular electrostatic information calculated by density-functional theory (DFT). Two featuring strategies (topological and atomic partial change features) were employed to explore the relation between these features and the 3D crystal structure of a small molecule. These features were then assembled to construct the holistic 3D crystal structure of a molecule. Molecular graphs were encoded using a graph attention mechanism to deal with the issues of the inconsistencies of local substructures contributing to the entire molecular structure. The root-mean-square deviation (RMSDs) of approximately 80% dMXP predicted structures and the native binding poses within receptors are less than 2.0 Å.

Identifying eleven new ferroptosis inhibitors as neuroprotective agents from FDA-approved drugs.

With increasing evidence that ferroptosis is associated with diverse neurological disorders, targeting ferroptosis offers a promising avenue for developing effective pharmaceutical agents for neuroprotection. In this study, we identified ferroptosis inhibitors as neuroprotective agents from US Food and Drug Administration (FDA)-approved drugs. 1176 drugs have been screened against erastin-induced ferroptosis in HT22 cells, resulting in 89 ferroptosis inhibitors. Among them, 26 drugs showed significant activity with EC50 below10 µM. The most active ferroptosis inhibitor is lumateperone tosylate at nanomolar level. 11 drugs as ferroptosis inhibitors were not reported previously. Further mechanistic studies revealed that their mechanisms of actions involve free radical scavenging, Fe2+ chelation, and 15-lipoxygenase inhibition. Notably, the active properties of some drugs were firstly revealed here. These ferroptosis inhibitors increase the chemical diversity of ferroptosis inhibitors, and offer new therapeutic possibilities for the treatments of related neurological diseases.

Extending Plasmonic Enhancement Limit with Blocked Electron Tunneling by Monolayer Hexagonal Boron Nitride.

Fabricating ultrasmall nanogaps for significant electromagnetic enhancement is a long-standing goal of surface-enhanced Raman scattering (SERS) research. However, such electromagnetic enhancement is limited by quantum plasmonics as the gap size decreases below the quantum tunneling regime. Here, hexagonal boron nitride (h-BN) is sandwiched as a gap spacer in a nanoparticle-on-mirror (NPoM) structure, effectively blocking electron tunneling. Layer-dependent scattering spectra and theoretical modeling confirm that the electron tunneling effect is screened by monolayer h-BN in a nanocavity. The layer-dependent SERS enhancement factor of h-BN in the NPoM system monotonically increases as the number of layers decreases, which agrees with the prediction by the classical electromagnetic model but not the quantum-corrected model. The ultimate plasmonic enhancement limits are extended in the classical framework in a single-atom-layer gap. These results provide deep insights into the quantum mechanical effects in plasmonic systems, enabling the potential novel applications based on quantum plasmonic.

Boron-Doped Single-Molecule van der Waals Diode.

Single-molecule diode was the first proposed device in molecular electronics. Despite the great efforts and advances over 50 years, the reported rectification ratios, the most critical parameter of a diode, remain moderate for the single-molecule diode. Herein, we report an approach to achieve a larger rectification ratio by adopting the combined strategies of p-type boron doping, the single-layer graphene nodes, and the van der Waals layer-by-layer architecture. Measured current-voltage curves showed one of the as-fabricated single-molecule diodes hit an unprecedented large rectification ratio of 457 at ±1 V. Break junction operations and spectroscopic measurements revealed the three-atom-thick configuration of the single-molecule diodes. With the experimental and theoretical calculation results, we demonstrated the doped boron atoms induced holes to redistribute the electron density, making the asymmetric coupling at positive and negative biases, and the van der Waals interaction promoted asymmetric coupling and significantly boosted diode performance.

Morphology-Dictated Mechanism of Efficient Reaction Sites for Li2O2 Decomposition.

In the pursuit of a highly reversible lithium-oxygen (Li-O2) battery, control of reaction sites to maintain stable conversion between O2 and Li2O2 at the cathode side is imperatively desirable. However, the mechanism involving the reaction site during charging remains elusive, which, in turn, imposes challenges in recognition of the origin of overpotential. Herein, via combined investigations by in situ atomic force microscopy (AFM) and electrochemical impedance spectroscopy (EIS), we propose a universal morphology-dictated mechanism of efficient reaction sites for Li2O2 decomposition. It is found that Li2O2 deposits with different morphologies share similar localized conductivities, much higher than that reported for bulk Li2O2, enabling the reaction site not only at the electrode/Li2O2/electrolyte interface but also at the Li2O2/electrolyte interface. However, while the mass transport process is more enhanced at the former, the charge-transfer resistance at the latter is sensitively related to the surface structure and thus the reactivity of the Li2O2 deposit. Consequently, for compact disk-like deposits, the electrode/Li2O2/electrolyte interface serves as the dominant decomposition site, which causes premature departure of Li2O2 and loss of reversibility; on the contrary, for porous flower-like and film-like Li2O2 deposits bearing a larger surface area and richer surface-active structures, both the interfaces are efficient for decomposition without premature departure of the deposit so that the overpotential arises primarily from the sluggish oxidation kinetics and the decomposition is more reversible. The present work provides instructive insights into the understanding of the mechanism of reaction sites during the charge process, which offers guidance for the design of reversible Li-O2 batteries.

Seeing Is Not Necessarily Believing: Is the Surface-Enhanced Raman Spectroscopy Signal Really from the Target?

Reagent purity is crucial to experimental research, considering that the ignorance of ultratrace impurities may induce wrong conclusions in either revealing the reaction nature or qualifying the target. Specifically, in the field of surface science, the strong interaction between the impurity and the surface will bring a non-negligible negative effect. Surface-enhanced Raman spectroscopy (SERS) is a highly surface-sensitive technique, providing fingerprint identification and near-single molecule sensitivity. In the SERS analysis of trace chloromethyl diethyl phosphate (DECMP), we figured out that the SERS performance of DECMP is significantly distorted by the trace impurities from DECMP. With the aid of gas chromatography-based techniques, one strongly interfering impurity (2,2-dichloro-N,N-dimethylacetamide), the byproduct during the synthesis of DECMP, was confirmed. Furthermore, the nonignorable interference of impurities on the SERS measurement of NaBr, NaI, or sulfadiazine was also observed. The generality ignited us to refresh and consolidate the guideline for the reliable SERS qualitative analysis, by which the potential misleading brought by ultratrace impurities, especially those strongly adsorbed on Au or Ag surfaces, could be well excluded.

Machine-learning-assisted performance improvements for multi-resonance thermally activated delayed fluorescence molecules.

With favorable colour purity, multi-resonance thermally activated delayed fluorescence (MR-TADF) molecules exhibit enormous potential in high-definition displays. Due to the relatively small chemical space of MR-TADF molecules, it is challenging to improve molecular performance through domain-specific expertise alone. To address this problem, we focused on optimizing the classic molecule, DABNA-1, using machine learning (ML). Molecular morphing operations were initially employed to generate the adjacent chemical space of DABNA-1. Subsequently, a machine learning model was trained with a limited database and used to predict the properties throughout the generated chemical space. It was confirmed that the top 100 molecules suggested by machine learning present excellent electronic structures, characterized by small reorganization energy and singlet-triplet energy gaps. Our results indicate that the improvement in electronic structures can be elucidated through the view of the molecular orbital (MO). The results also reveal that the top 5 molecules present weaker vibronic peaks of the emission spectrum, demonstrating higher colour purity when compared to DABNA-1. Notably, the M2 molecule presents a high RISC rate, indicating its promising future as a high-efficiency MR-TADF molecule. Our machine-learning-assisted approach facilitates the rapid optimization of classical molecules, addressing a crucial requirement within the organic optoelectronic materials community.

Discovery of neo-Clerodane Diterpenoids from Ajuga campylantha as Neuroprotective Agents against Ferroptosis and Neuroinflammation.

Twelve new neo-clerodane diterpenoids, eight undescribed methoxy/ethoxy acetal analogues, and one new nor-iridane monoterpenoid were isolated from Ajuga campylantha. Their structures were elucidated using a combination of spectroscopic data, quantum chemical calculations, and X-ray crystallography. This research reveals the distinctive structural features of A. campylantha diterpenes, including distinct C rings and 4,18-double bonds, distinguishing them from diterpenes of other plants in the Ajuga genus. Compound 2 represents the first example of a 19(5→6)-abeo-clerodane formed through a Wagner-Meerwein rearrangement. The isolated compounds were assessed for their neuroprotective effects against RSL3-induced ferroptosis in HT22 cells and LPS-induced neuroinflammation in BV-2 cells. Notably, compound 7 inhibits ferroptosis (EC50 = 10 µM) with a potentially new mechanism of action. The preliminary structure-activity relationship studies revealed that the furan-clerodane diterpenoids possess potential ferroptosis inhibitory activity, while the lactone-clerodanes do not. This study represents the first report of furan-containing clerodanes within the Ajuga genus, providing fresh insights into the phytochemistry and pharmacological potential of A. campylantha.

Insight into the Heterogeneity of Longitudinal Plasmonic Field in a Nanocavity Using an Intercalated Two-Dimensional Atomic Crystal Probe with a ∼7 ŠResolution.

Quantitative measurement of the plasmonic field distribution is of great significance for optimizing highly efficient optical nanodevices. However, the quantitative and precise measurement of the plasmonic field distribution is still an enormous challenge. In this work, we design a unique nanoruler with a ∼7 Šspatial resolution, which is based on a two-dimensional atomic crystal where the intercalated monolayer WS2 is a surface-enhanced Raman scattering (SERS) probe and four layers of MoS2 are a reference layer in a nanoparticle-on-mirror (NPoM) structure to quantitatively and directionally probe the longitudinal plasmonic field distribution at high permittivity by the quantitative SERS intensity of WS2 located in different layers. A subnanometer two-dimensional atomic crystal was used as a spacer layer to overcome the randomness of the molecular adsorption and Raman vibration direction. Combined with comprehensive theoretical derivation, numerical calculations, and spectroscopic measurements, it is shown that the longitudinal plasmonic field in an individual nanocavity is heterogeneously distributed with an unexpectedly large intensity gradient. We analyze the SERS enhancement factor on the horizontal component, which shows a great attenuation trend in the nanocavity and further provides precise insight into the horizontal component distribution of the longitudinal plasmonic field. We also provide a direct experimental verification that the longitudinal plasmonic field decays more slowly in high dielectric constant materials. These precise experimental insights into the plasmonic field using a two-dimensional atomic crystal itself as a Raman probe may propel understanding of the nanostructure optical response and applications based on the plasmonic field distribution.

Plasmonic Photoelectrochemical Coupling Reactions of para-Aminobenzoic Acid on Nanostructured Gold Electrodes.

Surface plasmon resonance (SPR) bridges photonics and photoelectrochemistry by providing an effective interaction between absorption and confinement of light to surface electrons of plasmonic metal nanostructures (PMNs). SPR enhances the Raman intensity enormously in surface-enhanced Raman spectroscopy (SERS) and leads to the plasmon-mediated chemical reaction on the surface of nanostructured metal electrodes. To observe variations in chemical reactivity and selectivity, we studied the SPR photoelectrochemical reactions of para-aminobenzoic acid (PABA) on nanostructured gold electrodes. The head-to-tail coupling product "4-[(4-imino-2,5-cyclohexadien-1-ylidene)amino]benzoic acid (ICBA)" and the head-to-head coupling product p,p'-azodibenzoate (ADBA) were obtained from PABA adsorbed on PMN-modified gold electrodes. In particular, under acidic and neutral conditions, ICBA was obtained as the main product, and ADBA was obtained as the minor product. At the same time, under basic conditions, ADBA was obtained as the major product, and ICBA was obtained as the minor product. We have also provided sufficient evidence for the oxidation of the tail-to-tail coupling reaction product that occurred in a nonaqueous medium rather than in an aqueous medium. The above finding was validated by the cyclic voltammetry, SERS, and theoretical calculation results of possible reaction intermediates, namely, 4-aminophenlylenediamine, 4-hydroxyphenlylenediamine, and benzidine. The theoretical adsorption model and experimental results indicated that PABA has been adsorbed as para-aminobenzoate on the gold cluster in a bidentate configuration. This work offers a new view toward the modulation of selective surface catalytic coupling reactions on PMN, which benefits the hot carrier transfer efficiency at photoelectrochemical interfaces.

Binding structure, breaking forces and conductance of Au-Octanedithiol-Au molecular junction under stretching processes: a DFT-NEGF study.

Au-n-octanedithiol-Au molecular junction (Au-SC8S-Au) has been investigated using density functional theory combined with the nonequilibrium Green's function approach. Theoretically calculated results are used to build the relationship between the interface binding structures and single-molecule quantum conductance of n-octanedithiol (SC8S) embodied in a gold nanogap with or without stretching forces. To understand the electron transport mechanism in the single molecular nanojunction, we designed three types of Au-SC8S-Au nanogaps, including flat electrode through an Au atom connecting (Model I), top-pyramidal or flat electrodes with the molecule adsorbing directly (Model II), and top-pyramidal Au electrodes with Au atomic chains (Model III). We first determined the optimized structures of different Au-SC8S-Au nanogaps, and then predicted the distance-dependent stretching force and conductance in each case. Our calculated results show that in the Model I with an Au atom bridging the flat Au (111) gold electrodes and the SC8S molecule, the conductance decreases exponentially before the fracture of Au-Au bond, in a good agreement with the experimental conductance in the literature. For the top-pyramidal electrode Models II and III, the magnitudes of molecular conductance are larger than that in Model I. Our theoretical calculations also show that the Au-Au bond fracture takes place in Models I and III, while the Au-S bond fracture appears in Model II. This is explained due to the total strength of three synergetic Au-Au bonds stronger than an Au-S bond in Model II. This is supported from the broken force about 2 nN for the Au-Au bond and 3 nN for the Au-S bond.

Ferroptosis Inhibitory Aromatic Abietane Diterpenoids from Ajuga decumbens and Structural Revision of Two 3,4-Epoxy Group-Containing Abietanes.

Two new 3,4-epoxy group-containing abietane diterpenoids (1 and 2), together with five known diterpenoids (3-7), were isolated from Ajuga decumbens. Their structures were elucidated by spectroscopic data analysis, NMR calculations, and X-ray diffraction experiments. The structures of two known abietane diterpenoids were revised based on NMR calculations and X-ray diffraction data. Notably, compound 4 specifically inhibited RSL3-induced ferroptosis with an EC50 of 56 nM by antioxidation. Moreover, 4 significantly decreased RSL3-induced lipid and cytosolic ROS accumulation and ferroptosis marker gene PTGS2 mRNA expression. This work reports the most potent natural inhibitor against ferroptosis found so far.

Suppressing Sulfite Dimerization at a Polarized Gold Electrode/Water Solution Interface for High-Quality Gold Electrodeposition.

Solid/liquid interfacial structure occupies great importance in chemistry, biology, and materials. In this paper, by combining EC-SERS study and DFT calculation, we reveal the adsorption and dimerization of sulfite (SO32-) at a gold electrode/water solution interface, and establish an adsorption displacement strategy to suppress the dimerization of sulfite. At the gold electrode/sodium sulfite solution interface, at least two layers of SO32- anions are adsorbed on the electrode surface. As the applied potential shifts negatively, the adsorption strength of the first SO32- layer is weakened gradually and then is dimerized with the second orientated SO32- layer to form S2O52-, and S2O52- is further reduced to S2O32-. After hydroxyethylene disphosphonic acid (HEDP) is introduced to the gold electrode/sodium sulfite solution interface, the second oriented SO32- layer is replaced by a HEDP coadsorption layer. This results in the first layer of SO32- being desorbed directly without any structural transformation or chemical reaction as the potential shifts negatively. The suppression of sulfite dimerization by HEDP is more clear at the gold electrode/gold sulfite solution interface owing to the electroreduction of gold ions. Furthermore, the electrochemical studies and electrodeposition experiments show that as the sulfite dimerization reaction is suppressed, the electroreduction of gold ions is accelerated, and the deposited gold coating is bright and dense with finer grains.

Inspecting the structural characteristics of chiral drug penicillamine under different pH conditions using Raman optical activity spectroscopy and DFT calculations.

The investigation of the structural characteristics of chiral drugs in physiological environments is a challenging research topic, which may lead to a better understanding of how the drugs work. Raman optical activity (ROA) spectroscopy in combination with density functional theory (DFT) calculations was exploited to inspect the structural changes in penicillamine under different acid-base states in aqueous solutions. The B3LYP/aug-cc-PVDZ method was employed and the implicit solvation model density (SMD) was considered for describing the solvation effect in H2O. The conformations of penicillamine varied with pH, but penicillamine was liable to stabilize in the form of the PC conformation (the sulfur atom is in a trans orientation with respect to carboxylate) in most cases for both D- and L-isomers. The relationship between the conformations of penicillamine and the ROA peaks, as well as peak assignments, were comprehensively studied and elucidated. In the fingerprint region, two ROA couplets and one ROA triplet with different patterns were recognized. The intensity, sign and frequency of the corresponding peaks also changed with varying pH. Deuteration was carried out to identify the vibrational modes, and the ROA peaks of the deuterated amino group in particular are sensitive to change in the ambient environment. The results are expected not only to serve as a reference for the interpretation of the ROA spectra of penicillamine and other chiral drugs with analogous structures but also to evaluate the structural changes of chiral molecules in physiological environments, which will form the basis of further exploration of the effects of structural characteristics on the pharmacological and toxicological properties of chiral drugs.

Microphotoelectrochemical Surface-Enhanced Raman Spectroscopy: Toward Bridging Hot-Electron Transfer with a Molecular Reaction.

The rational design and applications of plasmon-mediated chemical reactions (PMCRs) are fundamentally determined by an understanding of photon-electron-molecule interactions. However, the current understanding of the PMCR of plasmon-decayed hot electron-mediated reactions remains implicit, since there has not been a single measurement of both hot-electron transfer and molecular transformation following photon excitation. Therefore, we invented a method called microphotoelectrochemical surface-enhanced Raman spectroscopy (µPEC-SERS) that uses an ultramicroelectrode (UME) whose dimensions match those of the focused laser spot. This system can simultaneously record the photocurrent (∼picoamps) of hot-electron transfer with a high signal-to-noise ratio and the SERS spectra of a molecular reaction in the same electrode area. The responses of the photocurrent and SERS spectra to laser illumination can correlate the surface reaction activated by hot electrons with the SERS spectral changes. A typical PMCR of p-aminothiophenol (PATP) on a Ag UME was used to illustrate that the correlation of the photocurrent with the spectral changes is capable of revealing the reaction mechanism in terms of the formation of activated oxygenated species. The laser power-, laser wavelength-, and surface roughness-dependent photocurrents link the formation of activated oxygenated species to the hot-electron transfer. Further comparisons of the photocurrent with the conventional electrochemical current of the oxygen reduction reaction indicate that the activated oxygenated species are oxidative in transforming PATP to p,p'-dimercaptoazobenzene, which is supported by a density functional theory (DFT) calculation. Therefore, µPEC-SERS could be a powerful tool for investigating PMCRs and other systems involving photon-electron-molecule interactions.

Plasmonic Hot Electron-Mediated Hydrodehalogenation Kinetics on Nanostructured Ag Electrodes.

An attractive field of plasmon-mediated chemical reactions (PMCRs) is developing rapidly, but there is still incomplete understanding of how to control the kinetics of such a reaction related to hot carriers. Here, we chose 8-bromoadenine (8BrAd) as a probe molecule of hot electrons to investigate the influence of the electrode potential, laser wavelength, and power on the PMCR kinetics on silver nanoparticle-modified silver electrodes. Plasmonic hot electron-mediated cleavage of the C-Br bond in 8BrAd has been investigated by combining in situ electrochemical surface-enhanced Raman spectroscopy and density functional theory calculations. The experimental and theoretical results reveal that the energy position of plasmon relaxation-generated hot electrons can be modulated conveniently by applied potentials and laser light. This allows the proposal of a mechanism of modulating the matching energy of the hot electron of plasmon relaxation to promote the efficiency of PMCRs in electrochemical interfaces. Our work will be helpful to design surface plasmon resonance photoelectrochemical reactions on metal electrode surfaces of nanostructures with higher efficiency.

Electronic Spillover from a Metallic Nanoparticle: Can Simple Electrochemical Electron Transfer Processes Be Catalyzed by Electronic Coupling of a Molecular Scale Gold Nanoparticle Simultaneously to the Redox Molecule and the Electrode?

Electrochemical electron transfer (ET) of transition metal complexes or redox metalloproteins can be catalyzed by more than an order of magnitude by molecular scale metallic nanoparticles (NPs), often rationalized by concentration enhancement of the redox molecules in the interfacial region, but collective electronic AuNP array effects have also been forwarded. Using DFT combined with molecular electrochemical ET theory we explore here whether a single molecular scale Au nanocluster (AuC) between a Au (111) surface and the molecular redox probe ferrocene/ferricinium (Fc/Fc+) can trigger an ET rate increase. Computational challenges limit us to AunCs (n up to 147), which are smaller than most electrocatalytic AuCs studied experimentally. AuC-coating thiols are addressed both as adsorption of two S atoms at the structural Au55 bridge sites and as superexchange of variable-size AuCs via a single six-carbon alkanethiyl bridge. Our results are guiding, but enable comparing many AuC surface details (apex, ridge, face, direct vs superexchange ET) with a planar Au(111) surface. The rate-determining electronic transmission coefficients for ET between Fc/Fc+ and AuC are highly sensitive to subtle AuC electronic features. The transmission coefficients mostly compete poorly with direct Fc/Fc+ ET at the Au(111) surface, but Fc/Fc+ 100 face-bound on Au79 and Au147 and ridge bound on Au19 leads to a 2- or 3-fold rate enhancement, in different distance ranges. Single AuCs can thus indeed cause rate enhancement of simple electrochemical ET, but additional, possibly collective AuNC effects, as well as larger clusters and more complete coating layers, also need to be considered.