RESUMEN
The interaction between foot-and-mouth disease virus (FMDV) and the host is extremely important for virus infection, but there are few researches on it, which is not conducive to vaccine development and FMD control. In this study, we designed a porcine genome-scale CRISPR/Cas9 knockout library containing 93,859 single guide RNAs targeting 16,886 protein-coding genes, 25 long ncRNAs, and 463 microRNAs. Using this library, several previously unreported genes required for FMDV infection are highly enriched post-FMDV selection in IBRS-2 cells. Follow-up studies confirmed the dependency of FMDV on these genes, and we identified a functional role for one of the FMDV-related host genes: TOB1 (Transducer of ERBB2.1). TOB1-knockout significantly inhibits FMDV infection by positively regulating the expression of RIG-I and MDA5. We further found that TOB1-knockout led to more accumulation of mRNA transcripts of transcription factor CEBPA, and thus its protein, which further enhanced transcription of RIG-I and MDA5 genes. In addition, TOB1-knockout was shown to inhibit FMDV adsorption and internalization mediated by EGFR/ERBB2 pathway. Finally, the FMDV lethal challenge on TOB1-knockout mice confirmed that the deletion of TOB1 inhibited FMDV infection in vivo. These results identify TOB1 as a key host factor involved in FMDV infection in pigs.
Asunto(s)
Virus de la Fiebre Aftosa , Fiebre Aftosa , Animales , Ratones , Receptores ErbB/metabolismo , Fiebre Aftosa/genética , Virus de la Fiebre Aftosa/genética , Regulación de la Expresión Génica , ARN Guía de Sistemas CRISPR-Cas , PorcinosRESUMEN
Mouse Hoxb8 mutants show unexpected behavior manifested by compulsive grooming and hair removal, similar to behavior in humans with the obsessive-compulsive disorder spectrum disorder trichotillomania. As Hox gene disruption often has pleiotropic effects, the root cause of this behavioral deficit was unclear. Here we report that, in the brain, Hoxb8 cell lineage exclusively labels bone marrow-derived microglia. Furthermore, transplantation of wild-type bone marrow into Hoxb8 mutant mice rescues their pathological phenotype. It has been suggested that the grooming dysfunction results from a nociceptive defect, also exhibited by Hoxb8 mutant mice. However, bone marrow transplant experiments and cell type-specific disruption of Hoxb8 reveal that these two phenotypes are separable, with the grooming phenotype derived from the hematopoietic lineage and the sensory defect derived from the spinal cord cells. Immunological dysfunctions have been associated with neuropsychiatric disorders, but the causative relationships are unclear. In this mouse, a distinct compulsive behavioral disorder is associated with mutant microglia.
Asunto(s)
Aseo Animal , Proteínas de Homeodominio/metabolismo , Trastorno Obsesivo Compulsivo/genética , Trastorno Obsesivo Compulsivo/fisiopatología , Animales , Linfocitos B/metabolismo , Conducta Animal , Trasplante de Médula Ósea , Encéfalo/citología , Encéfalo/fisiopatología , Proteínas de Homeodominio/genética , Humanos , Ratones , Microglía/metabolismo , Médula Espinal/metabolismo , Linfocitos T/metabolismoRESUMEN
Targeted mutagenesis in model organisms is key for gene functional annotation and biomedical research. Despite technological advances in gene editing by the CRISPR-Cas9 systems, rapid and efficient introduction of site-directed mutations remains a challenge in large animal models. Here, we developed a robust and flexible insertional mutagenesis strategy, homology-independent targeted trapping (HIT-trapping), which is generic and can efficiently target-trap an endogenous gene of interest independent of homology arm and embryonic stem cells. Further optimization and equipping the HIT-trap donor with a site-specific DNA inversion mechanism enabled one-step generation of reversible and conditional alleles in a single experiment. As a proof of concept, we successfully created mutant alleles for 21 disease-related genes in primary porcine fibroblasts with an average knock-in frequency of 53.2%, a great improvement over previous approaches. The versatile HIT-trapping strategy presented here is expected to simplify the targeted generation of mutant alleles and facilitate large-scale mutagenesis in large mammals such as pigs.
Asunto(s)
Alelos , Sistemas CRISPR-Cas , Edición Génica , Animales , Mutagénesis Insercional , Mutación , PorcinosRESUMEN
The African swine fever virus (ASFV) has caused a devastating pandemic in domestic and wild swine, causing economic losses to the global swine industry. Recombinant live attenuated vaccines are an attractive option for ASFV treatment. However, safe and effective vaccines against ASFV are still scarce, and more high-quality experimental vaccine strains need to be developed. In this study, we revealed that deletion of the ASFV genes DP148R, DP71L, and DP96R from the highly virulent isolate ASFV CN/GS/2018 (ASFV-GS) substantially attenuated virulence in swine. Pigs infected with 104 50% hemadsorbing doses of the virus with these gene deletions remained healthy during the 19-day observation period. No ASFV infection was detected in contact pigs under the experimental conditions. Importantly, the inoculated pigs were protected against homologous challenges. Additionally, RNA sequence analysis showed that deletion of these viral genes induced significant upregulation of the host histone H3.1 gene (H3.1) and downregulation of the ASFV MGF110-7L gene. Knocking down the expression of H3.1 resulted in high levels of ASFV replication in primary porcine macrophages in vitro. These findings indicate that the deletion mutant virus ASFV-GS-Δ18R/NL/UK is a novel potential live attenuated vaccine candidate and one of the few experimental vaccine strains reported to induce full protection against the highly virulent ASFV-GS virus strain. IMPORTANCE Ongoing outbreaks of African swine fever (ASF) have considerably damaged the pig industry in affected countries. Thus, a safe and effective vaccine is important to control African swine fever spread. Here, an ASFV strain with three gene deletions was developed by knocking out the viral genes DP148R (MGF360-18R), NL (DP71L), and UK (DP96R). The results showed that the recombinant virus was completely attenuated in pigs and provided strong protection against parental virus challenge. Additionally, no viral genomes were detected in the sera of pigs housed with animals infected with the deletion mutant. Furthermore, transcriptome sequencing (RNA-seq) analysis revealed significant upregulation of histone H3.1 in virus-infected macrophage cultures and downregulation of the ASFV MGF110-7L gene after viral DP148R, UK, and NL deletion. Our study provides a valuable live attenuated vaccine candidate and potential gene targets for developing strategies for anti-ASFV treatment.
Asunto(s)
Virus de la Fiebre Porcina Africana , Fiebre Porcina Africana , Eliminación de Gen , Genes Virales , Vacunas Virales , Factores de Virulencia , Animales , Fiebre Porcina Africana/inmunología , Fiebre Porcina Africana/virología , Virus de la Fiebre Porcina Africana/genética , Virus de la Fiebre Porcina Africana/inmunología , Virus de la Fiebre Porcina Africana/patogenicidad , Células Cultivadas , Genes Virales/genética , Histonas/genética , Porcinos , Vacunas Atenuadas/inmunología , Vacunas Virales/inmunología , Factores de Virulencia/genéticaRESUMEN
The present study was an 8-week feeding trial investigating the effects of lysine and threonine supplementation in vegetable-based diets on growth, antioxidative capacity, and gut microbiota of juvenile redclaw crayfish, Cherax quadricarinatus (initial weight 11.52 ± 0.23 g). The lysine and threonine were supplemented to formulate five isonitrogenous (37%) and isolipidic (9%) diets containing 0% (control), 0.2% lysine (L0.2), 0.2% threonine (T0.2), 0.4% lysine (L0.4), and 0.4% threonine (T0.4), respectively. Compared to the control, weight gain rate (WGR) and specific growth rate (SGR) of C. quadricarinatus significantly increased with increasing dietary lysine and threonine supplementation from 0.2% to 0.4% (P < 0.05). Hepatopancreas trypsin activity significantly increased with increasing levels of lysine and threonine in diets (P < 0.05). However, the pepsin, lipase, and amylase activities were not affected by dietary levels of lysine and threonine (P > 0.05). Compared with the control, crayfish in T0.4 and L0.4 showed significantly higher glutathione peroxidase (GPx) activity (P < 0.05), lower alanine aminotransferase (ALT) activity, and lower malondialdehyde (MDA) content (P < 0.05). Supplementation with 0.4% lysine significantly changed the composition of the gut microbiota (P < 0.05), which showed a significantly increased relative abundance of Proteobacteria and decreased Firmicutes, Actinomycetes, and Pontomyces (P < 0.05). The PICRUSt analysis demonstrated that the abundance of the metabolism and cellular processes pathways in the L0.4 group were markedly decreased compared with the control (P < 0.05). Meanwhile, a tighter interaction of the microbiota community in crayfish was observed in the T0.4 experimental group. In conclusion, these results suggested that dietary supplementation with 0.4% threonine could significantly promote growth and improve microbial health in juvenile C. quadricarinatus.
RESUMEN
BACKGROUND: The gangue content in coal seriously affects the calorific value produced by its combustion. In practical applications, gangue in coal needs to be completely separated. The pseudo-dual-energy X-ray method does not have high sorting accuracy. OBJECTIVE: This study aims to propose a novel multi-dimensional coal and gangue X-ray sorting algorithm based on CdZnTe photon counting detectors to solve the problem of coal and gangue sorting by X-ray. METHODS: This complete algorithm includes five steps: (1) Preferred energy bins, (2) transmittance sorting, (3) one-dimensional R-value sorting, (4) two-dimensional R-value sorting, and (5) three-dimensional R-value sorting. The output range of each step is determined by prior information from 65 groups of coal and gangue. An additional 110 groups of coal and gangue are employed experimentally to validate the algorithm's accuracy. RESULTS: Compared with the 60% sorting accuracy of the Pseudo-dual-energy method, the new algorithm reached a sorting accuracy of 99%. CONCLUSIONS: Study results demonstrate the superiority of this novel algorithm and its feasibility in practical applications. This novel algorithm can guide other two-substance X-ray sorting applications based on photon counting detectors.
Asunto(s)
Cadmio , Carbón Mineral , Telurio , Zinc , Rayos X , RadiografíaRESUMEN
The design and regulation of multiple room-temperature phosphorescence (RTP) processes are formidably challenging due to the restrictions imposed by Kasha's rule. Here, we report a general design principle for materials that show multiple RTP processes, which is informed by our study of four compounds where there is modulation of the linker hybridization between donor (D) and acceptor (A) groups. Theoretical modeling and photophysical experiments demonstrate that multiple RTP processes can be achieved in sp3 C-linked D-A compounds due to the arrest of intramolecular electronic communication between two triplet states (T1H and T1L) localized on the donor and acceptor or between two triplet states, one localized on the donor and one delocalized across aggregated acceptors. However, for the sp2 C-linked D-A counterparts, RTP from one locally excited T1 state is observed because of enhanced excitonic coupling between the two triplet states of molecular subunits. Single-crystal and reduced density gradient analyses reveal the influence of molecular packing on the coincident phosphorescence processes and the origin of the observed aggregate phosphorescence. These findings provide insights into higher-lying triplet excited-state dynamics and into a fundamental design principle for designing compounds that show multiple RTP.
RESUMEN
In recent years, microsphere-assisted microscopy (MAM) and atomic force microscope (AFM) have been rapidly developed to meet the measurement needs of microstructures. However, the positioning of microspheres, the inability of AFM to touch the underlying sample through the transparent insulating layer, and the challenge of AFM fast positioning limit their use in practical measurements. In this paper, we propose a method that combines MAM with AFM by adhering the microsphere to the cantilever. This method allows MAM and AFM to work in parallel, and their imaging positions can correspond with each other. We use this method to measure memory devices, and the results show that MAM and AFM yield complementary advantages. This approach provides a new tool for analyzing complex structures in devices and has potential for wide application.
RESUMEN
The merging flow through a T-junction is relevant to sample mixing and particle manipulation in microfluidic devices. It has been extensively studied for Newtonian fluids, particularly in the high inertial regime where flow bifurcation takes place for enhanced mixing. However, the effects of fluid rheological properties on the merging flow have remained largely unexplored. We investigate here the flow of five types of polymer solutions along with water in a planar T-shaped microchannel over a wide range of flow rates for a systematic understanding of the effects of fluid shear thinning and elasticity. It is found that the merging flow near the stagnation point of the T-junction can either be vortex dominated or have unsteady streamlines, depending on the strength of elasticity and shear thinning present in the fluid. Moreover, the shear thinning effect is found to induce a symmetric unsteady flow in comparison to the asymmetric unsteady flow in the viscoelastic fluids, the latter of which exhibits greater interfacial fluctuations.
RESUMEN
BACKGROUND: In fan beam X-ray imaging applications, several X-ray images sometimes need to be stitched together into a panoramic image because of the size limitations of the detector. OBJECTIVE: This study aims to propose a novel multi-view X-ray digital imaging stitching algorithm (MVS) based on the CdZnTe photon counting linear array detectors to solve the problem of fan beam X-ray stitching deformation. METHODS: The panoramic image is generated in four steps including (1) multi-view projection data acquisition, (2) overlapping positioning, (3) weighted fusion and (4) projected pixel value calculation. Images of a globe and foot are scanned by fan beam X-rays and a CdZnTe detector. The proposed method is applied to stitch together the scanned images of the globe. Three other methods are also used for comparison. Finally, this MVS algorithm is also used in the stitching of scanned images of the foot. RESULTS: Compared with the 50% stitching accuracy of other methods, the new MVS algorithm reached a stitching accuracy of 94.4%. Image distortion on the globe and feet is also eliminated and thus image quality is significantly improved. CONCLUSIONS: This study proposes a new multi-view X-ray digital imaging stitching algorithm. Study results demonstrate the superiority of this new algorithm and its feasibility in practical applications.
Asunto(s)
Algoritmos , Tomografía Computarizada por Rayos X , Rayos X , Tomografía Computarizada por Rayos X/métodos , Intensificación de Imagen Radiográfica/métodos , Fantasmas de ImagenRESUMEN
Compared with rodents, pigs are closer to humans in terms of anatomy, metabolism and physiology, so they are ideal animal models of human diseases and xenotransplantation donors. In addition, as one of the most important livestock in China, pigs are closely related to our lives in terms of breeding improvement, disease prevention and animal welfare. In this review, we mainly summarize the research progress and future application of genetically modified pig models in the fields of xenotransplantation, molecular breeding and human disease models. We wish to take this opportunity to raise the awareness of researchers in related fields on cutting-edge technologies such as gene editing and understand the significance of genetically modified pig models in life science research.
Asunto(s)
Edición Génica , Animales , Humanos , Porcinos/genética , Animales Modificados Genéticamente/genética , Trasplante Heterólogo , Modelos Animales , ChinaRESUMEN
Multiresonant thermally activated delayed fluorescence (MR-TADF) compounds are attractive as emitters for organic light-emitting diodes (OLEDs) as they can simultaneously harvest both singlet and triplet excitons to produce light in the device and show very narrow emission spectra, which translates to excellent color purity. Here, we report the first example of an MR-TADF emitter (DOBDiKTa) that fuses together fragments from the two major classes of MR-TADF compounds, those containing boron (DOBNA) and those containing carbonyl groups (DiKTa) as acceptor fragments in the MR-TADF skeleton. The resulting molecular design, this compound shows desirable narrowband pure blue emission and efficient TADF character. The co-host OLED with DOBDiKTa as the emitter showed a maximum external quantum efficiency (EQEmax ) of 17.4 %, an efficiency roll-off of 32 % at 100â cd m-2 , and Commission Internationale de l'Éclairage (CIE) coordinates of (0.14, 0.12). Compared to DOBNA and DiKTa, DOBDiKTa shows higher device efficiency with reduced efficiency roll-off while maintaining a high color purity, which demonstrates the promise of the proposed molecular design.
RESUMEN
White light scanning interferometry (WLSI) has been an extremely powerful technique in precision measurements. In this work, a phase noise estimation based surface recovery algorithm is proposed, which can significantly improve the measurement accuracy by decreasing the noise level in phase map coming from the systemic and environmental disturbances. The noise existed in phase map is firstly researched in spectrum domain and defined as the linear combination of complex terms at each angular wavenumber. Afterwards, based on the theoretical linearity of the phase distribution, the surface features can be redefined through establishing the function with respect to phase noise. By applying least square estimation (LSE), a spectral coefficient is defined to determine the optimal estimation of phase noise that represents the best statistical consistency with the actual case, from which a more accurate surface after removing most phase noise will then be generated. In order to testify the noise elimination ability of the proposed method, a nano-scale step height standard (9.5nm±1.0nm) is scanned, and the measurement result 9.49nm with repeatability 0.17nm is successfully achieved. Moreover, a leading edge of an aero-engine blade is also tested to investigate the potential of this method in industrial inspections. The measurement comparison with AFM is also displayed.
RESUMEN
The flow of polymer solutions under extensional conditions is frequently encountered in numerous engineering fields. Planar contraction and/or expansion microchannels have been a subject of interest for many studies in that regard, which, however, have mostly focused on shallow channel structures. We investigate here the effect of changing the depth of contraction-expansion microchannels on the flow responses of three types of polymer solutions and water. The flow of viscoelastic polyethylene oxide (PEO) solution is found to become more stable with suppressed vortex formation and growth in the contraction part while being less stable in the expansion part with the increase of the channel depth. These opposing trends in the contraction and expansion flows are noted to have similarities with our recent findings of constriction length-dependent instabilities in the same PEO solution (M. K. Raihan, S. Wu, Y. Song and X. Xuan, Soft Matter, 2021, 17, 9198-9209), where the contraction flow gets stabilized while the expansion flow becomes destabilized with the increase of the constriction length. In contrast, the entire flow becomes less stable in deeper channels for the shear-thinning xanthan gum (XG) solution as well as the shear thinning and viscoelastic polyacrylamide (PAA) solution. This observation aligns with that of water flow, which is attributed to the reduced top/bottom wall stabilizing effects.
RESUMEN
Atomically two-dimensional (2D) materials have generated widespread interest for novel electronics and optoelectronics. Specially, owing to atomically thin 2D structure, the electronic bandgap of 2D semiconductors can be engineered by manipulating the surrounding dielectric environment. In this work, we develop an effective and controllable approach to manipulate dielectric properties of h-BN through gallium ions (Ga+) implantation for the first time. And the maximum surface potential difference between the intrinsic h-BN (h-BN) and the Ga+implanted h-BN (Ga+-h-BN) is up to 1.3 V, which is characterized by Kelvin probe force microscopy. More importantly, the MoTe2transistor stacked on Ga+-h-BN exhibits p-type dominated transfer characteristic, while the MoTe2transistor stacked on the intrinsic h-BN behaves as n-type, which enable to construct MoTe2heterojunction through dielectric engineering of h-BN. The dielectric engineering also provides good spatial selectivity and allows to build MoTe2heterojunction based on a single MoTe2flake. The developed MoTe2heterojunction shows stable anti-ambipolar behaviour. Furthermore, we preliminarily implemented a ternary inverter based on anti-ambipolar MoTe2heterojunction. Ga+implantation assisted dielectric engineering provides an effective and generic approach to modulate electric bandgap for a wide variety of 2D materials. And the implementation of ternary inverter based on anti-ambipolar transistor could lead to new energy-efficient logical circuit and system designs in semiconductors.
RESUMEN
Inductance detection is an important method for detecting wear debris in ship lubricating oil. Presently, an LCR (inductance, resistance, capacitance) meter is generally used to detect wear debris by measuring the inductance change of the sensing coil. When ferromagnetic debris passes through the sensing coil, a pulse will appear in the inductance signal. Previous studies have shown that the amplitude of the inductance pulse decreases significantly with the increase in the particles' velocity. Therefore, it is difficult to detect ferromagnetic debris with a high flow velocity using an LCR meter. In this paper, a novel method, high-frequency voltage acquisition (HFVA), is proposed to detect ferromagnetic debris. Different from previous methods, the wear debris was detected directly by measuring the voltage change of the sensing coil, while the synchronized sampling method was utilized to ensure the higher-frequency acquisition of the sensor output signal. The experimental results show that when the velocity of particles increased from 6 mm/s to 62 mm/s, the amplitude of the signal pulse obtained by HFVA decreased by only 13%, which was much lower than the 85% obtained by utilizing the LCR method.
RESUMEN
Porcine epidemic diarrhea virus (PEDV) is a burdensome coronavirus for the global pig industry. Although its fecal-oral route has been well-recognized, increasing evidence suggests that PEDV can also spread through airborne routes, indicating that the infection may also occur in the respiratory tract. N6-methyladenosine (m6A) has been known to regulate viral replication and host immunity, yet its regulatory role and molecular mechanism regarding PEDV infection outside the gastrointestinal tract remain unexplored. In this study, we demonstrate that PEDV can infect porcine lung tissue and the 3D4/21 alveolar macrophage cell line, and the key m6A demethylase ALKBH5 is remarkably induced after PEDV infection. Interestingly, the disruption of ALKBH5 expression remarkably increases the infection's capacity for PEDV. Transcriptome profiling identified dozens of putative targets of ALKBH5, including GAS6, which is known to regulate virus infectivity. Further, MeRIP-qPCR and mRNA stability analyses suggest that ALKBH5 regulates the expression of GAS6 via an m6A-YTHDF2-dependent mechanism. Overall, our study demonstrates that PEDV can infect porcine lung tissue and 3D4/21 cells and reveals the crucial role of ALKBH5 in restraining PEDV infections, at least partly, by influencing GAS6 through an m6A-YTHDF2-dependent mechanism.
Asunto(s)
Coronavirus , Virus de la Diarrea Epidémica Porcina , Enfermedades de los Porcinos , Animales , Macrófagos Alveolares , Virus de la Diarrea Epidémica Porcina/fisiología , Porcinos , Enfermedades de los Porcinos/genética , Replicación ViralRESUMEN
Room-temperature phosphorescence (RTP) originating from higher-lying triplet excitons remains a rather rarely documented occurrence for purely organic molecular systems. Here, we report two naphthalene-based RTP luminophores whose phosphorescence emission is enabled by radiative decay of high-lying triplet excitons. In contrast, upon cooling the dominant phosphorescence originates from the lowest-lying triplet excited state, which is manifested by a red-shifted emission. Photophysical and theoretical studies reveal that the unusual RTP results from thermally activated excitonic coupling between different conformations of the compounds. Aggregation-regulated excitonic coupling is observed when increasing the doping concentration of the emitters in poly(methylmethacrylate) (PMMA). Further, the RTP quantum efficiency improves more than 80-fold in 1,3-bis(N-carbazolyl)benzene (mCP) compared to that in PMMA. This design principle offers important insight into triplet excited state dynamics and has been exploited in afterglow-indicating temperature sensing.
RESUMEN
Herein, we demonstrate how judicious selection of the donor decorating a central multi-resonant thermally activated delayed fluorescence (MR-TADF) core based on DiKTa can lead to very high-performance OLEDs. By decorating the DiKTa core with triphenylamine (TPA) and diphenylamine (DPA), 3TPA-DiKTa and 3DPA-DiKTa exhibit bright, narrowband green and red emission in doped films, respectively. The OLEDs based on these emitters showed record-high performance for this family of emitters with maximum external quantum efficiencies (EQEmax ) of 30.8 % for 3TPA-DiKTa at λEL of 551â nm and 16.7 % for 3DPA-DiKTa at λEL =613â nm. The efficiency roll-off in the OLEDs was improved significantly by using 4CzIPN as an assistant dopant in hyperfluorescence (HF) devices. The outstanding device performance has been attributed to preferential horizontal orientation of the transition dipole moments of 3TPA-DiKTa and 3DPA-DiKTa.
RESUMEN
We designed and synthesized two new ionic thermally activated delayed fluorescent (TADF) emitters that are charged analogues of a known multiresonant TADF (MR-TADF) compound, DiKTa. The emission of the charged derivatives is red-shifted compared to the parent compound. For instance, DiKTa-OBuIm emits in the green (λPL = 499 nm, 1 wt % in mCP) while DiKTa-DPA-OBuIm emits in the red (λPL = 577 nm, 1 wt % in mCP). In 1 wt % mCP films, both emitters showed good photoluminescence quantum yields of 71% and 61%, and delayed lifetimes of 316.6 µs and 241.7 µs, respectively, for DiKTa-OBuIm and DiKTa-DPA-OBuIm, leading to reverse intersystem crossing rates of 2.85 × 103 s-1 and 3.04 × 103 s-1. Light-emitting electrochemical cells were prepared using both DiKTa-OBuIm and DiKTa-DPA-OBuIm as active emitters showing green (λmax = 534 nm) and red (λmax = 656 nm) emission, respectively.